Page number problem while printing

We are unable to get the page number while printing from SAP, we are trying to print a word document from SAP and when it prints the page numbers do not appear properly. if we save the document to the desktop and print, it prints properly.
We print to a Xerox 7345 printer...we have loaded the exact driver, but still does not print. Can anything be done from UNIX side for this.
the page number appear as 0/9 0/9...where it should appear as 1/9, 2/9..etc..
Any help is highly appreciated, Hope there are some good Basis guys out here.

Hi Aakash,
Is it from report or SAP Script?
Regards,
Atish

Similar Messages

HP Deskjet 5568 WiFi Printer - Last page gets stuck while printing

I bought a HP Deskjet 5568 two days ago. I have printed nearly 50 pages already.
I am having a problem while printing "manually" on both sides. It prints the odd pages first from back to front. While printing the last page (the first page of the document), the printer gets stuck. The page is halfway in and the printer just stays there. If I pull out the page, the 'orange' resume light blinks; if I press it, the printing restarts.
The problem is that after it gets stuck, the printer doesn't print anything. I have to delete the print job and now I have to print the other 'even' pages myself.
Please help me. Is the paper getting stuck part of the printing process (stupid question)? I don't actually think it's getting "stuck," I think the printer doesn't allow the page to come out for some reason as the page is actually fully printed (the data is all there).
I have also noticed that this only happens while printing in "manual" two-sided mode.
Also, I can't edit the printing shortcuts in the printer control panel. If I change the paper size to A4, the next time I open the control panel, it is once again set to Letter. Why is this?

Hi I_am_Ann,
I understand you are having an issue printing from the computer on your HP Deskjet Ink Advantage 2515 All-in-One Printer.
I do need some other information to assist you.
The current OS installed?
Did you install the printer on your computer?
This document should help take a look at the printer to make sure all is ok.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03243075&tmp_task=solveCategory&cc=us&dlc=en&lc...
Please feel free to contact me if you have other questions
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Workaround solution for page number problem in books to PDF

I needed to create a spiral-bound book from Aperture, and decided to print to PDF to create a master rather than going through the online ordering option. Discovered the page numbers were always missing or jumbled whether I used the Automatic or Always On page number settings, even through they were displayed in Aperture correctly. In the final preview before printing to PDF, they become corrupted and no longer display correctly.
To workaround this problem:
1. Turn the Page Numbers option to Off in Aperture. (This option is located in the pull-down menu of the Gear icon under the pages thumbnails.)
2. Print to PDF without any page numbers.
3. Open your PDF in Adobe Acrobat Professional (to have write priveledges.)
4. From the Document option in the top bar, Add Headers and Footers.
5. Click the Footer tab, to add page numbers.
NOTE: If you want to change the format of your page numbers on odd and even pages for a two page spread, you have to add them in two different passes. For example, insert page number in left column, then repeat action to insert page number in right column only while enabling replacement of existing page numbers. You can choose to start page numbering on any page.
7. Save your PDF, and you can have it printed wherever you want.
G5 dual quad Mac OS X (10.4.7)
G5 dual quad Mac OS X (10.4.7)

Hi,
Use the window type as FINAL WINDOW, then your problem will be solved.
Double click on the window and change the window type to FINAL.
Reward if it is helpful.

Problem while printing 132 col. report....

We have one report of width 132 columns. But when we print this report,
it prints only upto half width (Approx. upto 70 characters.)
We are using Reports 6i on Red Hat Linux server.
I tried to modify report width at developing time. But it is of no
use.
Which parameters needs to be changed to solve this problem?
Thanks...
Kiran.

Hello Abid,
I tried as you suggested. But problem is not solved.
But when I run this report in Windows environment, it prints ok. i.e. I am getting full width of report. What I notice here that while printing thru Windows, I am geeting 'US STD FANFOLD' paper size . But in Red Hat Linux (Advanced Sever 2.1) I am not getting this page size. SO I think if I have this page size in Red Hat then my problem may get solved. Have you any idea how can we get this page size in Red Hat ?
Thanks.... Kiran

Problem while printing in ukraine language using smart form

Hi All,
Am facing an issue while printing the quality certificate in Ukraine language. I have created the smartform in English,later I maintained the transalations in Ukraine. I will execute the print program by passing the delivery number in selection screen.
The problem is in print preview every thing is coming fine in Ukraine language except the ship-to party address,But when I issue the print only the ship-to party address in coming in UK rest all are coming as junk characters. Am using HELVCYR font. I have tried creating form in UK as well but same result.
Other Ukraine documents are printed correctly using the same printer.
Please tell me what could be the problem here?
Thanks in advance.
Regards
harris

Hi Harikrishna,
Which printerdevice you using .Is it supports uk language.Try to findout proper printer device for this.

ACH Payment Advice problem while printing

hi,
I am using Print program rffous_t and custimized form Z_F110_US_AVIS BY COPYING F110_US_AVIS.
My problem is while debugging i am getting the values from the driver program.but in print out i am getting 'XXXXXXXXXXXXXX' for all driver program values.Can any one help me.
answers are rewarded.
thanks and reagrds,
Manik

Hi,
When the check printing prints in more than 1 page,
check should be printed at the last page, so in remaining previous pages
we print void pages with out displaying any values.

Page number problem in Binder

How can I get the page number to stay at the true bottom of a page (.5 margin) when pages have different numbers of lines? The document looks perfect in the saved PDF, but when it prints the page number is underneath the last line of text, sometimes in the middle of the page. I'm combining org charts created in Visio and saved as a PDF with pages of data from an Excel spreadsheet; the Excel pages are fine, but the org charts (some of which will print in landscape, others in portrait in the book that will be created from this binder) look awful. Thanks in advance for help! I'm pulling my hair out over this...

Hi
i am not getting your points, what you have done, for printing page no. create a secondary window and put its properties accordingly (in output options), see the screenshot below
and then use the code i have written in my previous post, (in the above screenshot i am using this to print page no in footer area, you must change it accordingly)
If you get hided please delete it and create a secondary window as shown in %WINDOW1
and then create a text within it, and use the code i have written .
I hope your problem will get sort out.

Page number problem in xml report

hi all,
I have created one xml report for purchase order
I want to print the page number and po number for each page ,
to achieve this i have inserted at header section the page number as "1"
but it is displaying for only 1 and 3rd and 5th pages and so on
kindly help me on this
thanks for all in advance.

>
i have inserted at header section the page number as "1"
>
why?
>
but it is displaying for only 1 and 3rd and 5th pages and so on
>
of course
use
>
Page numbering
Insert page numbers into your final report by using the page numbering methods of your word processing application. For example, if you are using Microsoft Word:
1. From the Insert menu, select Page Numbers...
2. Select the Position, Alignment, and Format as desired.

Page number problem with document imported from MS Word.

I am a new Mac/Pages user and imported a Word document to use as a template to help me learn the Pages formatting nuances. This has worked well except for one problem. I have page numbers in the footer, but only the first digit of the page number shows up, i.e. 7,8,9,1,1...etc. I can't find a way to edit or delete the page number imported from Word. I can easily insert the page numbers through Pages but can't get rid of the imported pages numbers. Also, how do I prevent page 1 from receiving a page number?

Hi,
Others have reported difficulty removing page numbers from imported Word docs. I think it can be done, but it may not be worth the effort to repair the imported document when you can easily Select All and Copy the entire document and Paste it into a fresh Pages blank document without the improperly formatted, persistent Word page numbering.
Jerry

REP-1849: Failed while printing : Problem while printing on network printer

I am getting this error message while printing the report on Network Printer.
"REP-1849: Failed while printing"
Reports Server is not installed on my machine.
On shared printer, it has no problems.
Platform is Win2000. Report Builder 6.0.8.11.3
Plz help !
Thanks in advance !

Try the following if your printer is a network printer
1. Add Printers - select Local Printer
2. In the Add Printer wizard, select "create a new port" option and select "TCP/IP" as type
3. Write the IP address of the network printer in the "Add standard TCP/IP Printer Port wizard". The port name becomes IP_<ip addr>. Click Next.
4. Select the printer and printer type in "Add Printer" wizard.
5. Select a driver and Write a printer name. This completes the setup. Use this printer name to print from Oracle reports.
Hope this helps..
Yogesh
I am getting this error message while printing the report on Network Printer.
"REP-1849: Failed while printing"
Reports Server is not installed on my machine.
On shared printer, it has no problems.
Platform is Win2000. Report Builder 6.0.8.11.3
Plz help !
Thanks in advance !

Problem while printing through citrix

Dear Gurus ,
We are facing the problem during printing through citrix .
When we print locally without using citrix were able to get the proper print as it displayed in the spool .
But When we try to take the printout of document having say 12 colum , only 10 colums r coming asthe print out .
Please suggest as the views on this issue are valuable
Thanks in advance .
Chirag Kohli .

Hi
I am facing same problem
Please let me know if you get any solution
Thanks
Rakesh Patel
[email protected]

Problem while printing

I am using adobe acrobat professional 8.1. while printing the printout will be jumbled. For this if i use print as image option an advanced, i will get the correct printout, if i give print as image the file size will be heavier, and printing gets slow. i am using windows xp professional, and thosiba E studio200 printer. please help me. thank u
vijay

hi! Krishna Kumar
Check whether the Print immediately option is checked in Print properties.
else
if you have created a new print format for you Program , check whether that format has been Transported to Production.
Regards,
Nagulan

Page Number problem

Using ID 5.0.4, WinXP SP2, I still can't get page numbering to work properly. I've added three chapter files to a book.indb file. The book tab shows:
1-20 for Chapter 1
1-18 for Chapter 2
1-20 for Chapter 3
The page counts are correct, but the book tab thinks each chapter begins on page 1. But despite that, here's what each chapter file shows:
Chapter 1 file shows pages 1-20,
Chapter 2 file shows pages 21-38,
Chapter 3 file shows pages 19-38.
Since chapter 2 is indeed 18 pages, Chapter 3 seems to think it should begin on page 19, when it should in fact begin on page 39. I've tried every option I can think of to resolve this, but nothing has any effect.
Book Page Numbering Options are set to "Continue from previous document" and "Doc Numbering Options" are set for "Automatic Page Numbering." "Doc Chapter Numbering" is also set for "Continue from Previous Doc." The "Start Section" box at the top is checked, but the box is greyed out, so I can't uncheck it (in case that would help).
Is there a fix for this, or do I have to do it the brute-force way by turning off automatic page numbering and specifying a beginning page number for each chapter?
Thanks, John

Ta-da!! After more than a dozen tries, I finally got Shift-Ctrl-Alt to give me the Delete preferences pop-up. I did so, then opened the book again. All three chapter files began on page 1, but the "Update page & Section Numbers" option fixed it!!
Another quirk (I think) is that my "Open a recent item" list shows the recently-opened chapter (.indd) files, but *never* shows the book.indb file. If I open the "Open" folder at the bottom of the list and double-click on the book.indb file, nothing apparently happens. That's because the book file opens *under* the InDesign list box. I need to move the box out of the way to find the book.indb file. No big deal, because I'll eventually kill this opening list window anyway. But sure is confusing.
Peter and ManiSankar, thanks very much for all the help on this.

Alv list report-problems while printing

hai,
i get following dump error when tryign to print a alv list report.
'Illegal interruption of the event LOAD-OF-PROGRAM.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSZA12" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    During the flow of the event LOAD-OF-PROGRAM (event for the
    initialization of an ABAP program), a condition occurred under which
    the event was to be left early. This is not permitted as it would
    result in an inconsistent status in the ABAP program.'
the problem resolves for a particular output(when i restrict the list to lesser rows) by changing FORMAT from
X_65_255 to X_90_120 in the print dialog properties option..
however this restricts the coloumn width..
anycase i will have to print the output for all conditions.
the problem seems to be centred around number of rows in the list output..

is somethign wrong with the values in this internal table gt_comtypes_tab...
this is where the dump is pointing..at LAOD OF PROGRAM EVENT
1     FUNCTION addr_get_conversion_table.
2     *"----
3     ""Lokale Schnittstelle:
4     *" EXPORTING
5     *"     VALUE(COMTYPES_TAB) TYPE ADCOMTYPES_TAB
6     *" EXCEPTIONS
7     *"      INTERNAL_ERROR
8     *"----
9
10       comtypes_tab = gt_comtypes_tab.
11
12     ENDFUNCTION.
values of gt_comtypes_tab.
2     TEL     ADTEL
3     FAX     ADFAX
4     TTX     ADTTX
5     TLX     ADTLX
6     INT     ADSMTP
7     RML     ADRML
8     X40     ADX400
9     RFC     ADRFC
10     PRT     ADPRT
11     SSF     ADSSF
12     URI     ADURI
13     PAG     ADPAG

Problem while printing SAP Script

Hi All,
I have one scenario, in which I have to copy the Standard SAP Script form (HR_ALL_FIX) client '000' and import in the development server as custom SAP script(ZHR_ALL_FIX) and making change in main window the text. Instead of "Yours Faithfully" text I have changed it to 'Warm Regards'.
When I try to view the print preview of the script from PP40 tcode, the output is overlapped.
Instead of 'warm regards' to be displayed at the end of the page, its being printed in between somewhere.
No other changes I have made.
Any inputs and help will be really helpful.
Thanks in advance

I am still facing the problem . tried everything. Have only changed the language while copying from DE to EN.
Also, just creating a Z form without ANY change at all( even the printer used to check print preview is the same)... and attaching it to OOVM transaction and then checking the print preview - TEXT comes randomly (in different order)
Any help will be really appreciated and rewarded..
Awaiting help.
Edited by: HeenaChampaneri on Apr 15, 2010 8:39 AM

Page number problem while printing

Similar Messages

Maybe you are looking for