Page numbers are repeating in Page Thumbnail view.

Using Adobe Actobate XI Standard with Windows.  When I in insert another adobe document into my current document (by either using the tool Insert from File or dragging it from another screen), my page numbers in the thumbnails get the same page number.  For example, original document is 5 pages, insert a page 6 from somewhere else and it is now listed as a second page 5.  Insert a page 7 and now I have three that are labeled page 5.  How can I stop/fix this.  Thanks

Those are page labels, not page numbers, and they don't have to be in order, or to use the same scheme.
To set them all as the actual pages numbers click the Options button in the Pages panel and then select Number Pages. Select "All" and then your numbering scheme and you're done.

Similar Messages

  • Page numbering - multiple repeating frames

    Hi,
    It’s a bit tricky in explaining this but I shall try to do my best.
    This is an invoice report with 2 parts (everything in the main section), main invoice and summary. The main invoice is in repeating frame R2 and summary (matrix report) is in repeating frame R3. Both the repeating frames are encompassed in repeating frame R1.
    Each part of the report should have page numbering (1 of 2 type) and the numbering should be independent of each other (for main invoice and summary).
    Main invoice has page numbering reset (both current page number and total number of pages) at R2 and summary's page numbering is being reset at R3. The report is working fine for a single invoice but when running it for multiple invoices the output is as below
    Inv# 100 - Main Section 1 of 2
    ------------------------------2 of 2
    Summary 1 of 1
    Inv# 101 - Main Section 2 of 3
    ------------------------------3 of 3
    Summary 3 of 3
    Inv# 102 - Main Section 2 of 3
    ------------------------------3 of 3
    Summary 3 of 3
    where as the desired output is
    Inv# 100 - Main Section 1 of 2
    ------------------------------2 of 2
    Summary 1 of 1
    Inv# 101 - Main Section 1 of 2
    ------------------------------2 of 2
    Summary 1 of 1
    Inv# 102 - Main Section 1 of 2
    ------------------------------1 of 2
    Summary 1 of 1
    It would be worth not to change the report's design as there are many frames, fields,..... but I don't know how to resolve this numbering problem.
    I am using reports 6i.
    Thanks for your help in advance.
    -Srikanth

    Any inputs would be appreciated.
    Thanks in advance
    -Srikanth

  • New Pages no longer allows SECTIONS (in thumbnail view window) to be re-arranged like before?

    New Pages no longer allows SECTIONS (in thumbnail view window) to be re-arranged like before? You could drag and drop sections within your document the same way you could drag and drop pages in Preview's PDF documents. So how do you re-arrnage your document now?
    ALSO
    You used to be able to duplicate/copy a section/page by draging it with OPTION-LEFT-CLICK to a space below or above in the thumbnial window. The same way it works in PREVIEW in a PDF document. Did I miss something or is this also a bug?!
    These were extremely helpful to me and I hope many others. Can anyone help!?
    Thanks :-)

    Apple has removed over 90 features from Pages 5.
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Pages '09 should still be in your Applications/iWork folder.
    Archive/trash Pages 5 and rate/review it in the App Store, then get back to work.
    Peter

  • When I convert a Word doc to PDF, some of the page numbers are missing.

    I'm using Word 2003 and Acrobat Pro 7.0. When I print out the Word doc all the page numbers are there, but when I concert to PDF most of them are missing. Any suggestions?

    How are you converting? What are the job settings for the PDF conversion? What if you print to the Adobe PDF printer?

  • I have a A4 document (569 pages) and within that A4 there are few A3's. Is there a way to isolate the A3's or find out what page numbers are A3's instead of scrolling through all the 569 pages???

    I have a A4 document (569 pages) and within that A4 there are few A3's. Is there a way to isolate the A3's or find out what page numbers are A3's instead of scrolling through all the 569 pages???

    thank you for the info... however I'm done buying pdf readers.... I've got three now, that should suffice.
    I don't think there's a problem such as you mentioned because the pages are all similar : text and drawings. Some of the pages with drawings work, other similar pages don't.
    I converted with Calibre to epub format and this seems to work !!!
    So good so far...
    Now I need to find a conversion to pdf to allow me to use goodreader or iannotate.
    Basically... the text is ok, because a conversion allows reading. So a shortcoming by Apple in my opinion. Again, all pdf's should be readable on such an expensive tool !!!

  • How do you get iBooks Author to show page numbers? (All my pages are in blank layout.)

    I'm using iBooks Author 2.0 to make a picture book and can't get it to show page numbers. The "insert page numbers" menu item doesn't highlight when I'm creating a page, nor does a number magically show up when I preview the book on my iPad. Please help?
    It may have something to do with how I'm using the ToC (tried to avoid having a ToC, but that's not working out too well. Any suggestions on how to do that with a picture book would also be helpful.)
    Thanks,
    C

    Thanks K T, This definitely got page numbers to appear.
    Now I actually have to read the iBooks Author support to figure out what I'm doing wrong with the whole Section/Chapter template thing. (It would be nice to just have a simple picture book template. Not to complain.)
    Thanks for your technical support across so many issues.
    C

  • Page numbers not working in pages

    Help!
    I'm working on a document that will be 100+ pages, printing it double sided to be bound together. I would like to have the pages numbers listed in the footer on the outside of the page as well as some text in the center of the footer. Working with Pages '09 version 4.1.
    I have "facing pages" selected. "Left and Right pages different" selected. "Use previous headers and footers" selected. I selected "Insert Auto page numbers" and told it to put them on the outside.
    The problem - only some pages have the numbers on the outside like I selected. Pages 1-12 have the page numbers are all left justified. Pages 13-16 are correct. Pages 17-23 have the page numbers are all left justified. So on and so forth. There is no rhyme or reason why some of these are different. I do have different sections in the document - but sometimes it's in the middle of the section that it decides to change the formatting on me.
    On top of that, I added the text I wanted in the center. On some pages it's there, others it isn't. And again, no rhyme or reason as to why. Sometimes, the page numbers ARE in the correct place, but the text IS NOT there. Sometimes the page numbers ARE NOT in the correct place, and the text IS there. Leaving me with very few pages that are 100% correct.
    The only thing I have going for me at the moment is that every page has a page number on it! I suppose that's something. And I believe I know how to go in and change the footers individually. But, like I said, this will be 100+ pages, I'd really like to just do it once, not individually for each page.
    Help please! Thanks!

    Hello black94,
    Ok I can load the WinForm project and know part of your game, although I'm not so sure how to play the game. I cannot understand your language.
    When I checked the WPF project it seems you build the UI with WPF and only write events here, I haven't find binding related xaml code. Anyway, can you quote the problem or code about how you insert the white cell in WPF?
    For the printPreviewDialog, I see you already asked about this question before:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/ee97efd9-9245-4972-8576-a5230fb520e7/printpreviewdialog-in-wpf?forum=wpf
    So the following place is where the error raised?
    PrintDocument printdocument = new PrintDocument();
    System.Windows.Controls.PrintDialog printDialog = new System.Windows.Controls.PrintDialog();
    System.Windows.Forms.PrintPreviewDialog printPreviewDialog1 = new System.Windows.Forms.PrintPreviewDialog();
    //this.printPreviewDialog1.Document = this.printDocument1;
    Regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • What's the fix for this CS4 message: One or more of the pages specified are not valid page names

    I'm trying to export two pages (a spread) as a PDF. I've tried a number of times, using various techniques, including exporting first to a .imx file. Each time I get this message: One or more of the pages specified are not valid page names.
    How can I get this to work?
    I can't attach the file because it is 11MB.
    Thanks,

    Are you using sections in your document? That may mess up your pagenumbering while exporting pages as spreads. Try to put + to front of page numbers... like  +12-+13 (into Export dialog´s page range field)
    Another option is go to Preferences > General and change pagenumbering view method from Section Numbering to Absolute Numbering.

  • "Ghost" page numbers on every second page - how to remove?

    Hi,
    I'm setting a short book with Pages and after importing from Word, I'm seeing duplicate, partially hidden additional page numbers on every second page. I'd like to remove them entirely, keeping Pages' page numbering. Removing and inserting page numbers doesn't help and the second set of numbers can't be selected in any way (clicking, dragging don't work). One solution would be to re-import from word, deselecting page numbers beforehand, but I'd rather like avoid this step as I made many changes in Pages.
    Here's a screenshot showing the duplicate page numbers: http://dl.dropbox.com/u/3304376/pages_bug.png
    Does anybody have an idea how to remove them?

    Hello,
    Sometimes in the process of importing from Word, page numbers are improperly converted to Master Objects or Background Objects. Go to Format > Advanced > Make Master Objects Selectable. Then, with the cursor in the Margin of the document, press the Command Key (Cursor changes to an Arrow) and drag the cursor diagonally across the page number to select it. Then press the Delete key and the number should be gone. You need to check carefully to make sure that you have eliminated all the instances. There may be one per Section.
    Jerry

  • Page Numbering: Image bleeds over page number

    I tried to send the image to the back, but once you have page numbers on a Master Page is there a way to have them all view over images that bleed off the bottom?
    Thank you
    Donna

    > however this program should have had an overlay feature for numbering.
    Criticizing PM for any shortcoming is like criticizing a typewriter for
    not being a word processor.
    PM is a dead application that has seen ZERO development for the better
    part of ten years and will not see one minute of further development.
    If you want a full featured pagelayout application it's time to move to
    InDesign and take advantage of Adobe's upgrade price from Pagemaker.
    Bob

  • I am reading in ibooks and i do not see how many pages there are or what page i am on. how do i fix this

    i am reading in ibooks and i do not see how many pages there are or what page i am on. how do i fix this

    Some books may not display a page number on each page, or the position indicator, because the author did not include them. 
    Most basic books resembling paperbacks that are mostly words (like Kindle books) will display these because they are so basic
    that iBooks knows they need to have that information superimposed, so it just does it.
    For more advanced books, the people who made the book may elect to not display page numbers for some or all of the pages. 
    What book are you reading, and have you looked at another book and had the same problem?

  • How to add two different page numbers in a single page

    How to add two different page numbers in a single page? One is for page number of the whole article, the other one is for page number for each chapter in the article.

    It's quite complicated, see
    Two Page Numbering Schemes in the Same Document.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Oracle Reports - page numbering for repeating frames

    Hello,
    I have an Oracle Report that has one parent repeating frame containing several children repeating frames. One repeating frame has a maximum of three records per page. If the records do not exceed the maximum, page numbering is fine. If there are more than three records it creates a new page. The new page appends to the end of the report and throws off the page numbering. I changed the source of the page numbering from page number to panel number. The panel number gives the best results. All pages are numbered with the exception of the appended page(s). Does anyone have any suggestions?
    Thanks

    YES!!!, change the PRINT condition of your
    panel field to ALL instead of FIRST.
    null

  • Page Numbering on repeating frame with 3 logical pages per physical page

    We have a report in Reports 6i that prints a form on continous multi-part paper. We are converting the report to print to a laser printer with three forms per page. Each form has page numbers in the format of "page 1 of 15". The "page" refers to the form number and the "of" refers to the total number of forms for the outer group. So we could have page 1 of 15 through page 15 of 15 followed by page 1 of 112, etc.
    I have tried all of the suggestions on how to base page numbers on a repeating frame and non of them seem to work. All the examples seem to be based on the idea that the logical page contains 1 or more physical pages; whereas my situation is that I have multiple logical pages on each physical page.
    Does anyone have a thought on how to do this?

    Create one summary column (lets say cs_pagenumber) in inner group and provide following:
    Function: Count
    Source: any field from innrer group
    Reset At: outer group
    Create one summary column (lets say cs_totalpages) in outer group and provide following:
    Function: Count
    Source: any field from innrer group
    Reset At: outer group
    (above will work if one field is printed only once in a form)
    Create a field in inner repeating frame for cs_pagenumber and create a boilerplate text (&cs_totalpages) in the same repating frame for cs_totalpages. This should solve the problem.
    Hope this helps.

  • Page numbers are not generated correctly when print from Word to PDF

    Whenever I print my Word document to PDF, my page numbers do not reflect the page numbers shown in Print Preview.
    For example, I have a Word document with 10 pages and after generating it as PDF, the page number shows Page 1 of 1; Page 2 of 2; Page 3 of 3; ......Page 10 of 10.
    Please advise what may be the cause and how can I rectify this problem?
    Thank you.

    Thank you for your reply.
    I do have some sections breaks on the pages, however the pages are all shown in running sequence even on Preview page.
    It is the final generated document that has this problem.
    I emailed my colleagues my WORD document and ask them to generate to PDF and they have no issues printing the WORD to PDF and every pages were in running order.
    Any other advise?

Maybe you are looking for