Page overflow in script

Hi
I am currently using program RFFOUS_C for printing the check. it creating fine output. but have issue.
I am passing rem statement in my script. i am am creating only one page in the script. but when i generate spool it show two pages one with Main Window & the check & second window has all the secondary widow on the second page.
Can any one tell me how can i print only page from the printer.
Need Help ASAP.
Thanks
Amber.
Edited by: Amber Raj Singh on Oct 2, 2009 5:48 AM

hi
exact means ?
         like for A4 sheet size is 21.0*29.7 so u may defin any window , line with in this range .
   for max. utilization of page :
             left margin 0.1 mm
             upper margin 0.1 mm
             width 20.9 cm
             length 29.8 cm
like this u can do as required.
reward if help ful.

Similar Messages

Same set of data should print twice on same page in SAP SCRIPT

Hi Experts,
I come across a requirement where I need same set of data in sap script should print twice as it is on same page.
and if first page overflow, then same scenario should continue till complete data is printed. Basically main window data should print twice in two blocks on same page.
E.g.
If I have 10 line item which is to be printed on top window on first page. Now I want that same 10 lines should be printed in a block below the first block. Data should flow similarly across multiple pages.
Hope my question is pretty clear. I am expecting suitable answers from experts.
Thanks in advance.
Regards,
Vijay

Hi
I had the same request for a check form in Canada. I solved it by writing the line item output into variables and print these variables in a second window. It was ~10 hours of effort, not a real nice technical solution but it worked.
If you require I can send you a PDF of the sap script form definition. You can contact me at [email protected] Answers can take 1 week or more.
Best regards
JD

Page overflow: smartforms

Gurus
i am working on smartformsfor contarct data and printing some texts from contract details.
the form is printing fine if there are multiple lines in "header text". but when there is more data and page overflows, header text data truncates.
i want this to automatically go to next ( new) page without truncating. window type is secondary. i suppose it doesnt overflow, but i want to do it, i cannot put this to main window as there is one main window ( morever it didnt work this way as well). i want the data to continue on new page if this overflows or at least i want this( entire window) to be printed in a new page if this overflows.
Please help, tried a lot, but nothings working.
regards
kavana

Hi all thanks for your responses.
i did try folder node. it didnt help. when i checked page protection, nothing got printed even the half which used to get.
i cannot put this in main window as it changes the order of appearence. i want this to be teh last one to be printed.
i created one more page "last" and put thsi part there, but again, nothing got printed.
seems liek its not goign for more 1 page or i dotn knwo what i am doing wrong.
currently i have 2 pages. first page's next page is first and next page's next page is next.
i have many windows, last 3 are, main window, total window and next is note window.
in note window i write this header text. i cannot put this data in main window as total should follow the data after main window and thsi heaeder text shoudl be the last one.
so plz help.... i am really not understanding this "next page" concept. is that soemthing to do with and also how to set varaible window in smartforms like sap scripts. here only main window seems working but in my case i am not able to make this main window as i already have one.
i tried makign this main window, no error came, but nothing got printed even half which usually comes.
plz help
regards
kavana

How to print last page in sap script in ladscape format?

Hi all,
can any 1 tell me How to print last page in sap script in ladscape format?
Thanks In advance.
Pravin

Hi Pravin Sherkar,
we can do this in SAP Scripts.
we need to create two pages, one of landscape and another of potrait.
now after filling the data at last we need to call the page which is of format landscape using START_FORM function module.
You can use condition &PAGE& = &FORMPAGES&.
Please check this link
Printing Portrait/Landscape in sapscript
Re: Landscape and potrait in same layout?
http://www.sap-img.com/ts013.htm
Best regards,
raam

Short Dump : Page Overflow

Hi All,
When i am executing a report on Production, i am getting short dump - "Page overflow".
It's very urgent.
Early response will be highly appreciated.
Best regards,

Can you provide more details?
From what it looks like, i think your basis should increase the memory allocations for your internal tables.
Regards,
Ravi

How to remove blank page in sap script

hi ,
I have a problem in sap script. I copied one std. script and made some changes i.e removing the unwanted pages from the script.
no where NEW-PAGE kind of command is declared in window but still a new blank page is coming in printing.
i checked with the posted comments in forum n what i found .. i did that part for my script..but no progress.
so help needed.
thnx,
m

Hi,
If there is no any "NEW-PAGE" command in your any window, Pls check following probable causes.
1. Check your main Window, may be there is blank line at the last of the main window, so check that and remove that,so you won't get the blank page
2.Please check what have you defined as the NEXT PAGE for your first page. If so change it and make the first page itself as the next page.
Hope it help you.
Regrads,
Lokesh.

How can I create more than one main window in a page of SAP SCRIPT?

How can I create more than one main window in a page of SAP SCRIPT? If anybody helps me I will be obliged.
Regards,
Subhasish

Hi Ganguly,
It is possible to have more than one main window in a same page.
You create a main window and simply you copy and past it in the same page.. it will create first main window name as MAIN and other main windows as MAIN01,MAIN02.... up to MAIN99.
Contets flow from MAIN , MAIN01, MAIN02.......................MAIN99. contents after filling the current window it flows to next window(by default, you skip as well with some keyword not sure could be NEW-WINDOW)
you want print the main window data twice? or you want to create two main window in the same page ?
1. give two copies in the no of copies in the output type screen ( Which pop up is coming after excute the program ).
2. create two page with the same script form.
3. you can write the coding inside the program to print twice the same page.
Hope this information use full to you..

How to change the address to new address for all pages in a script

i created a script for my website against an IP address
now i have to run the same script of web site against new IP address
can i change programmitically the old ip address of all script pages to new ip address?
or should i go manually by opening each and every page address properties and changing it to new ip address.
any suggestions
my visual script is having around 75 pages.
having a visual script with that many pages is best practice?
thanks in advance

Hello Pasumarthi,
If I understand your question correctly, the address contains an IP address that you need to change for the 75 pages..
If you change the first address in the page, save the script and re-run the test this should fix the remaining 74 pages.
ex: http://192.168.2.1/index.html (Old)
http://202.116.25.1/index.html(New)
If the url example above is this task you are going to resolve, this will take care of your issue.
If you have 75 scripts that need the URL changed, and you have upgraded to 8.20, you can use the script updater utility to do this.
Please let me know if this resolves your issue.
Best Regards,
Jim

How to Avoid blank page in SAP Script

I am working on a Script. My Script prints a check.
This script is a copy of a std script.
It has 3 pages - First Next Last
My First page has all the required data.
My second page is empty with out any values.
I am getting the blank page as Page 2 when executing. How can we avoid it ?
Senthil

Hi Senthil,
Please see the below points:
1. Please check what have you defined as the NEXT PAGE for your first page. If so change it and make the first page itself as the next page.
2. Check your main Window, may be there is blank line at the last of the main window, so check that abd remove that,so you won't get the blank page
Please see the link which is similar to your problem:
Re: How to remove blank page in sap script
May it helps you.
Regards.
Deepak Sharma.

How to change a Code Page in SAP SCRIPT ?

I have a specific requirement, would need your help :
There is a CODE PAGE which is getting assigned to the SAP SCRIPT FORM. For E.g : 1100 is generally used for SAP SCRIPTS.
I would like to know if there is a possibility to change the Code Page based on certain conditions ??
Also i would like to know how and where is a CODE PAGE and SAP SCRIPT FORM linked.
I have analysed that a default code page can be set in the SAP LOG ON PAD but not able to find the issues mentioned above.
Kindly help me out with your valuable suggestions and solutions.
Thankyou
Brijesh.

Hi,
MDMP means Multi Display Multi Processing. See the note system for details. The problem of MDMP is that the different languages use different codepages and not all characteres can be displayed in every codepage.
A solution would be a unicode conversion of the system. In unicode there is only one internal codepage, which contains all special characters of the individual languages. However the migration needs several hours of down time and unicode systems need more memory and disk space. I can't tell you a percentage for that. You need at least R/3 4.7 for unicode.
In non-unicode system I believe you can't change the codepage inside a SAPscript document directly. I would have to end form processing an start a new form. To change the language you can try the ABAP-command SET LOCALE. Also see the language parameter in START_FORM.
If that doesn't work I would try using RFC-Connections. Make RFC-Connections in your system which contain the system it self as target system, but with the desired language filled in. You do not need to provide a user or password, that would be taken form the logged on user.
Inside your printing program you put the real printing into a function module. Your report then can call the function via RFC using a connection in the correct logon language.
Greetings

How To trigger last page in sap script of customer account statement

Hello all,
I am working on customer account statement.
It has it's own standard script(F140_CUS_STAT_02). But my client's requirement was completly diffrent,so i copied that to z script and made some changes like delete some window and some another window.
Now on first page , i have following windows,
1) Header
2) address
3) main
4) Account
5) Footer.
Next Page having following windows,
1) Header
2) Main
3) account
4) footer
Now i want to print account window on lsat page, so i put the condition nextpage = 0.
and it is working fine , but as account window is physically present after Main window , so that much blak sapge is getting creted after main window on every page.
To remove that blank space i am thinking of creting one more page and everytime i want display account window on that page.
I have creted the last page also. but in my output it not detecting that last page.
For First page - next page is next.
For Next page - next page is next.
for Last page- next page is last.
Also i have added following code at last in main window.
/: NEXT-PAGE LAST.
But i think i am placing this code at incorrect position in main window.
I am not able to find out the correct podition to put the above code,but main window of that script conataing so namy text element, and that text element are getting handled from driver program based on some conditions.
I have added my code in main window but not changed the original code.
Plz let me know where to write /: NEXT-PAGE LAST. in main window.
Or provide me some another solution to trigger thet last page in sap script.
Regards,
Anuja Dhondge

Hi ,
actually in account window i have used tha box command to print account statement.
Previously i was printing this account statement in main window itself but without using bottom and end bottom command.
So , as i made some changes or add some code in main window then lines of this account statement were getting dismental.
So my question is using bottom and end-bottom command this will happen or not????

Need to print some text only in last page in SAP script

Moved to correct forum by Moderator. General wasn't right either.
Hi All.
I need to print "Remarks" only in last page of sap script.
Can anyone please help me on this.
Thanks
Senthil kumar V.
Edited by: Matt on Nov 21, 2008 7:38 AM

Hi,
you have 4 possibilities.2 at non main window, 2 at main window.
at non main window.
1. /: IF &PAGE(C)& = &SAPSCRIPT-FORMPAGES(C)&
remarks
remarks
remarks
   /: ENDIF
2, /: if &NEXTPAGE& ='0'.
remarks
remarks
remarks
   /: ENDIF
at main window
3. Add the remarks at the last item of the main which is printed
4. add a new item to your main (/E)
    put your remarks in it.
   Change your program in such a way this item will print as last one.
   like
    /E REMARKS
remarks
remarks
remarks
   and in sapscript program add logic at the end.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'REMARKS'
EXCEPTIONS
element = 1
window = 2.
I am sure this will do. Make a choice.
Gr., Frank

Printing LAST page in SAP script on the back side.

Hi ,
I have a problem with the printing of the LAST page on the reverse side of the form, when done with a vendor.
At a time we print many vendors together.
So, when done with printing of a vendor it needs to print his address on last page, reverse side(address)
Next will be followed by another vendor details.
I cannot give 'D' for the first page because it would fail if the form flows more than 2 pages.
is there any way of triggering the LAST page in SAP Script when it done with printing of one vendor.
any help would be highly appreciated.
regards.

Hi ,
In Script PO i have to print 'Terms and Conditions' text only on the back side of last page of the PO.
Presently script contains THREE pages ( FIRST, NEXT, TERMS).
FIRST with attributes :
next page as NEXT , Print mode T.
NEXT with attributes :
next page as NEXT and print mode T
TERMS with attributes :
next page as ' '.
I Created 'TERMS AND CONDITION' window.For TERMS page i selected 'TERMS AND CONDITION' window only.
So page window of 'TERMS' is 'TERMS AND CONDITION' and i included standard text in 'TERMS AND CONDITION' window.
If PO contains 9 pages( that means MAIN WINDOW data flows up to 9th page with footer also ).
So i have to print standard text(Terms and conditions) back side of 9th page only not on all pages.
So total PO contians 9 pages with 10 prints.
Please help to solve the issue
Thanks and Regards
Venkata swamy

Urgent - Not able to Print back page for Last Page in SAP Script.

Hello All,
I need to Print back page in SAP Script, I am able to do it by setting print mode as D, but now the problem is, it does not print back page for last page.
For eg. if there are 3 pages it prints back page for first two. If there is only one page then it does not print back page.
Please Help.
Thanks.

hi,
Yes, we can print logo as water mark in scripts
Just do as like this....
Upload your logo via SE78.
- Select 'Import' button from application toolbar of SE78, and perform upload.
and write this code in scripts
BITMAP 'COMPANY_LOGO' OBJECT GRAPHICS ID BMAP TYPE BCOL
regards
Sankar

Last page in SAP Script

Hi All,
I have a requirement of printing terms and conditions of PO on a new page of SAP Script.
I created a new page as LAST and called it through NEW-PAGE command from MAIN window.
On my LAST page I created 1 window, which calls Standard Text.
Issue I am facing is in spite of having data of more than 1 pages , print preview is displaying only 1 page of Terms and Condtions.
Can you please let me know what am I missing?

Hi Shradda,
you also can just add an additional processing.
You know, something like
/: PERFORM 'YOUR_ROUTINE' IN PROGRAM 'YOUR_PROG'
/: ENDFORM
See here: https://help.sap.com/saphelp_crm700_ehp02/helpdata/en/4e/34f87463de02c2e10000000a15822b/content.htm?frameset=/de/4e/3663…
But in my opinion it is the best to make a copy of the original because I'm pretty sure, there will be more additional requierements in the end and just to enhance or to use this technique is very hard to understand after the second implemented spot
Can you share your stuff how you tried it?
I mean, calling two sites in a row should definitv work fine.
/: NEW-PAGE 'LAST1'
/: NEW-PAGE 'LAST2'
I tried it on my own and it works perfectly fine...
Did you gave your last-page a followpage while testing the first suggestion? That is of course a must-have.
~Florian

Page overflow in script

Similar Messages

Maybe you are looking for