"Page peel" transition not working...
I have overlaid a graphic onto my timeline (oops, I mean storyline) and I want it, and only it, "lay" onto the image in a Page peel manner. The trouble is though that the entire screen image is being overlaid as opposed to just the graphic. Anyone have any idea how I can get the transition to just affect the graphic and not the entire screen?
Thanks.
Perhaps you need to clarifywhat your problem is. Maybe post some screenshots because it works perfectly for me.
Make sure you have the Direction popup set correctly.
This is the image curling onto the screen.
That's the image curling off.
Message was edited by: Tom Wolsky
Similar Messages
-
Hi, all.
I'm trying to use a page peel transition between two clips, but it's not working what I would consider correctly. These two clips ARE SNAPPED END-TO-END, so there's no gap between them and no blank frame in either one.
However, when I add the page peel to the end of the first clip, the clip peels off revealing a BLACK background. Once the transition is finished, the first frame of the 2nd clip appears.
What I WANT to happen is for the page peel of the first clip to reveal the beginning of the 2nd clip below instead of just a black/empty frame.
Is there some setting to make this work right? Putting the transition at the beginning of the 2nd clip didn't do it either. That just makes the black frame appear before the 2nd clip starts. It looks even weirder actually.
Anyhow, I'd appreciate your help. Transitions overall in FCE just aren't working intuitively for me. It's rare that I want to transition between a clip and, essentially, nothing (or a matte or whatever). I almost always want to transition BETWEEN TWO CLIPS, but FCE doesn't appear to do that.
Cheers,
ALFWith your added explanation it makes sense. As I suspected, this is a paradigm issue. I didn't realize one had to move the in & out points in order to "make" handles. One does not need to change in & out points when adding transitions to the beginning or end of a single clip, so this inconsistency threw me for a loop.
I'm not sure why the rules are different for one clip versus two, but based on how much this confuses people Apple should really make a HUGE point of explaining this in the online help or something. Especially since manually moving in & out points to allow transitions is done differently in most other software, including iMovie. Just my $0.02.
Given how this works, it would make a lot of sense to be able to arbitrarily extend a clip within FCE by holding the last frame. But I don't see how to do that off-hand. The page you reference mentions a "Ripple" tool, but is that what a ripple tool does? That part of the web page didn't make sense to me, but probably because I'm unfamiliar with that paradigm as well.
Definitely thanks for the clarification and education, though!
Cheers,
ALF -
How to de-interlace Page Peel transition?
I've used the FCE 4 Page Peel transition a number of times in a sequence I've been working on. When I was ready to export to a self-contained QuickTime Movie, I selected the entire NTSC anamorphic sequence and applied the De-interlace filter (the original video came from an SD camcorder recording in 16:9 format). After exporting the QuickTime movie and play it in the QuickTime Player, each Page Peel transition exhibits pretty severe interlacing artifacts (i.e., the edge of the peel has an obvious “comb” appearance instead of a sharp edge.
Is there any simple way to fix that? I tried going back and applying the De-interlace filter to each Page Peel transition, but all the Video Effects->Video filters where usually disabled (I did figure out how to make them enabled by a series of actions), but that didn't seem to affect the transitions.
Thanks.No, I haven't displayed it on a TV CRT. This project will be burned on a DVD, and some will watch it on a computer, while others will watch on DVD players attached to TVs.
I've seen the interlacing artifacts on my Mac when I play back QuickTime movies from FCE that weren't de-interlaced before exporting: comb-like fringes along edges of moving objects. De-interlacing removes that in the moving images. I'm just trying to figure out how to get it out of the Page-Peel transitions, if possible.
I guess it brings up an interesting question. For video that will be played on both computers and TVs, is it better to leave interlacing alone, or to de-interlace. What looks worse: interlaced video on a computer display, or de-interlaced video on a standard (non-progressive) TV? I don't have much experience with the finer points of interlacing yet, so I'd be interested in what others on this forum think about this. -
Crystal Report for VS2010 - The Go To Page function does not work
When running a report into Crystal(VS2010), the Go To Page function does not work. Typing in a page number and pressing Enter does not take you to that page. The report remains on the current page. I'm not sure if there is suppose to be a button like the one in Crystal 8.5(VS2008).
As long as you are using the CR assemblies for VS .NET, the viewer (Win) should look like this:
Remember, the ActiveX viewer based on the Report Designer Component (RDC, referencing craxdrt.dll) is not supported in VS 2010.
- Ludek
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Share Your Knowledge in SCN Topic Spaces -
My pages do not come up when I try to visit them in the web browser - ie the top page links do not work.
How do I reconnect the links to their relevant pages again (I use iWeb)The background photo is on top of the links. Select it and move it to the back or add the background image via the Inspector/Page/Layout pane in the Page Background section.
OT -
Layout Options - Page Order Does Not Work Correctly
I have a Photosmart C7280 All-in-One printer. The Layout Option - Page Order does not work as expected. The User Guide (page 95) states that the default for a multiple page document is to print first page first. The manual states that to print last page first requires one to change the Page Order to "Back to Front". For my Excel, Word, Internet Explorer and PDF pages, I need to leave the Page Order as "Front to Back" if I want the last page to print first. This makes no sense. In addition, I can't get my Quicken reports to print last page first no matter what I try. Does anyone no why the Page Order does not work as expected for Excel, Word, IE and PDF, and does not work at all for Quicken?
Keisha,
If you uncheck the "show" option, then the corresponding HTML for that item is not rendered on the page. Thus, when you try to inspect that item via APEX_APPLICATION.G_F02, it simply doesn't exist.
One trick that I use when I want to have hidden items on the page, but not make them take up any space, is to concatenate them to items that will be visible.
Using your query as an example, I would re-write it like this:
SELECT APEX_ITEM.CHECKBOX(1,ROWNUM,'CHECKED')ATTENDED,
APEX_ITEM.HIDDEN(2,C.PARTY_ID)
|| APEX_ITEM.HIDDEN(3,C.PARTY_TYPE_CODE)
|| C.PARTY_TYPE_CODE PARTY_TYPE_CODE,
S.PERSON_ID,
S.PERSON_FIRST_NAME AS NAME,
C.PARTY_CASE_ID
FROM CASE.PARTY C
INNER JOIN DN.PERSON S
ON C.PARTY_ID = S.PERSON_ID
WHERE C.PARTY_CASE_ID = :P18_CDBCASE_ID
AND C.PARTY_SEQ_NO = :P18_SEQThus, the second APEX report column will contain the HTML for the hidden items PARTY_ID & PARTY_TYPE_CODE, as well as the value for PARTY_TYPE_CODE. When you submit the page, you should not encounter any issues.
Thanks,
- Scott -
http://sumnertechnologies.com/
http://spendolini.blogspot.com/ -
Auto keyframe and auto transition not working
auto keyframe and auto transition not working and I have a creative cloud, in addition the auto keyframe works in the getting startel lessons....
In order to use these you need to have the autokey frame and transition selected
OFF ON
and have the first key checked then move the playhead to the new position and it should add the transition.
Did you try this and it is not working?. -
I have a macbook version mac os x 10.4.11 and im trying to download PAGES however its not working! help!!!
The latest iWork '09.2 requires 10.7 Lion. You can go onto eBay and get the '09.0 or the '08 version which will work with 10.4. http://en.wikipedia.org/wiki/IWork
iWork '09 http://www.ebay.com/sch/i.html?_sop=12&_ssov=1&_fln=1&_sacat=0&_sc=1&_nkw=iwork+ 09&rt=nc
iWork '08 http://www.ebay.com/sch/i.html?_nkw=iwork+08&_sacat=0&_odkw=iwork+09&_sop=12&_ss ov=1&_osacat=0&_fln=1&_sc=1 -
The 'go back one page' button does not work on all pages
The 'go back one page' and 'go froward one page' buttons do not work (they're light gray as opposed to dark gray) and neither does the 'back' button after right clicking. They worked fine in Firefox 3 but do not in version 4
Click '''Help '''| '''Restart with add-ons disabled '''and then in the menu which appears, checkmark ''Reset toolbars and Controls'', then ''Make changes and restart''.
-
Using Acrobat Pro X on windows 7. The replace pages feature does not work. Is this a known issue? Is there a fix?
Hi Todd,
I haven't heard other reports of this (though there was an issue quite some time ago where deleting pages on this combination of Acrobat/OS was challenging).
Can you please tell me what happens when you try to replace pages? Do you get an error message? Are you able to manipulate pages otherwise (delete, extract, and so on)? Is this issue unique to one file, or does it happen with all PDF files?
I look forward to hearing back from you.
Best,
Sara -
plzz i think i opened a hacked internet page and now notting works well autocad stopped working and firefox as well ........could mac os be virused??
There are no Mac viruses, only malware that requires your assistance to get installed. For more on this, see:
http://www.reedcorner.net/guides/macvirus
As to your problem, we can't say what might have happened without more information. Try restarting your computer, and if that doesn't help, we need to know what you saw and what's happening now in greater detail.
(Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.) -
Page up and page down does not work, it works in internet explora
page up and page down does not work @www.hkej.com/template/landing/jsp/main.jsp
it works when using internet exploraGo to >Tools>Options>Advanced and uncheck the "Use Autoscrolling" and "Always use the cursor keys to navigate..."
That worked for me. -
I can't seem to manipulate this transition to work properly - Although I set it to 'peel' from one still image clip (A) to another still image clip (B), it is only revealing the very same clip (A) underneath until about a quarter of the way through the transition when it jumps to image (B) - not at all like turning the page of a book.
I am a new user, but I've tried changing every variable in the transition settings with no success. Is there something I'm missing?
iMac with intel Mac OS X (10.4.6)Sounds as though you don't have enough Media Handles to allow the transition to work.
Search this forum for Handles or media Handles, there's plenty of info. The manual will explain it as well.
Al -
CSS transitions not working on iPad
Hello..
My CSS transitions are not working on the ipad at all
After a little research i'm wondering if this has to do with the z-index property of the elements i want to animate.
Could anyone tell me if i'm completely off-direction and/or what might be wrong.
The tabs on the bottom left corner of the page are supposed to animate up and display content, but they're not working at all... (work fine on desktops though)
http://tinyurl.com/transproblemipad
Thanks so much in advance of any guidance
KatrinaHi Nancy,
Thanks so much for taking a look.
Oh no
If it's not one thing, it's another. Hahaha...
Ok.. back to the drawing board.
Question: For this project, would you recommend providing separate CSS/using jquery to animate those sections under certain conditions only, or changing it alltogether and using jquery to animate the sections for all screens/devices?
Hope that question made sense...
Katrina -
Page Navigation Safari not working
Hi,
I am using page navigation but this is not working on Safari. Version 1.0 and 2.0.4 have been tested on OSX 10.2 and 10.4.7.
I am left with a page with nothing visible that I assume is meant to submit the form.
The source of the page follows.
Anyone know how to fix this?
<body onload="(top.frames.length >1) ? top.location='home.html' : window.location.href='home.html'"><?xml version="1.0"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta content="no-cache" http-equiv="Pragma" />
<meta content="no-cache" http-equiv="Cache-Control" />
<meta content="no-store" http-equiv="Cache-Control" />
<meta content="max-age=0" http-equiv="Cache-Control" />
<meta content="1" http-equiv="Expires" />
<title></title>
<script type="text/javascript" src="/DCP/theme/com/sun/rave/web/ui/defaulttheme/javascript/formElements.js"></script>
<link rel="stylesheet" type="text/css" href="/DCP/theme/com/sun/rave/web/ui/defaulttheme/css/css_master.css" />
<script type="text/javascript">
var sjwuic_ScrollCookie = new sjwuic_ScrollCookie('/homeredir.jsp', '/DCP/faces/homeredir.jsp');
</script>
<link id="link1" rel="stylesheet" type="text/css" href="/DCP/resources/stylesheet.css" />
</head>
<body id="body1" onload="return body1_jsObject.setInitialFocus();" onunload="return body1_jsObject.setScrollPosition();">
<form id="form1" class="form" method="post" action="/DCP/faces/homeredir.jsp" enctype="application/x-www-form-urlencoded">
<input id="form1_hidden" name="form1_hidden" value="form1_hidden" type="hidden" />
</form>
<script type="text/javascript">
var body1_jsObject = new Body('form1:button1');
</script>
</body>
</html>
</body>OK, I see it. The bug is a second body tag at the top of the page.
Maybe you are looking for
-
Problem with multiple skeakers name.....
Hi, I have 3 airport express in the house, I just renamed some of them using the Airport admin utility app. Now for some reason itune still shows the old names in the multiple speakers menu. Try to quit all apps even restart and check permissions no
-
Hi, Can you please tell me the difference between Personnel selection period and date selection period. Thanks, Maheedhar Please refer SAP Help and always search the web before posting Locked by: kishan P on Aug 24, 2010 1:15 PM
-
Problem with an extended business object
Dear experts, I am extending a standard business object for sales BUS2032, with the name ZBUS2032. To the new bus ( ZBUS2032 ) I have added a new method by assigning a custom function module developed by me for a requirement. I have re
-
MySQL Connection - Select Database - HTTP Error Code 405 Method Not Allowed?
We've set up a MySQL database with our host and can connect to that, and create, edit, delete tables using HeidiSQL, without a problem. However when we attempt to set up the connection in the Databases tab of our Applications panel in Dreamweaver we
-
Error #1063: Argument count mismatch on "filename"
Hi, all. I keep getting an error I cannot seem to solve. Although it does not seem to influence the behavior of my file, I don't know if it will in the future. ArgumentError: Error #1063: Argument count mismatch on "filename"::MainTimeline/"thisfunct