Page printing

Hi all
My smartform is printing basically 2 page, a letter and a form. These 2 item is printed using same print program and smartform. I put the letter as first page without Main Window, because this letter is not going to be more than one page. While the form I put as second page and next page with Main Window because this form might have more than one page.
I have a radio button in selection screen that if ticked, the second page (a form) will be printed.
If unticked only first page (letter) is printed.
As I know, I can put command in Main in first page to control the page printing.
But the problem is I dont have Main in my first page.
Is there any other way to solve this?
Please advise..Thanks in advance.
Thanks
az

Hi Pratik
Ive tried that way before but it doesnt fulfill my requirement.
If I put the condition in condition tab of Main window, only Main window didnt come out.
The other window will still come out. What I want is, the whole page is not printed.
Even if I put the condition in every window that I have in that page, the page is still printed but blank.
Any idea?
Thanks
az

Similar Messages

  • Full page prints from iPhone but not from iPad using photo app with AirPrint ?

    Full page prints from iPhone but not from iPad using photo app with AirPrint ? iPad only prints 4x6 on full size paper. It's an HP 8600.

    I also have this problem printing photos from an iPad to an Epson WF-2540 printer. It prints only 4x6 and without border (so print starts at extreme top left corner of paper). Borderless printing is not selected on printer. Printing a square photo just crops to 4x6 size.

  • Web page print do not take language other than english. earlier it was working.

    I use Firefox 16.0.2 in mylaptop having windows 7 starter. the web pages in languages ther than english is readable. But when i take web page print junk language is coming up. I use cutepdf as my printer. earlier I was comfortably having the print .

    Hi,
    If cutepdf has an option to embed fonts, you can try enabling it. Usually you may find the options in Firefox '''File''' ('''Alt''' + '''F''') > '''Print''' > '''Properties''' (for cutepdf) but in some cases you may also have to check the documentation/help for the relevant printer. If it was working earlier, you can also try to [https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox reset the print options].
    [http://kb.mozillazine.org/Problems_printing_web_pages Printing problems]
    [https://support.mozilla.org/en-US/kb/Firefox%20prints%20pages%20in%20a%20different%20layout Options]

  • Blank page printed

    I generate report with HTML style sheet. After that, I print my report from IE browser. There is one blank page printed at the end of the report.
    Why ? And how to remove this page ?
    Thanks
    null

    I have another poblem, and it look like you've solved it already,
    the question is
    I have only forms server instolled with web db listner (I do
    NOT have reports server, so I serve forms and reports both from
    forms server operating sysetm WinNT/2000)
    I want to show output to my user in HTML STYLE SHEET format as
    soon as he/she selects one of the menu items. ( I am calling
    reports using run_form)
    How can I set my out put as HTML STYLE SHEET ? ( directly in
    the borwser at runtime)
    I did add the parameter for DesFormat = 'HTMLCSS'
    as
    add_parameter(pl_id,':DesFORMAT,text_parameter,''HTMLCSS');
    but I don't get the out put in style sheet.
    I also tried to set up tool----> preferences
    and run time values to HTMLCSS !!
    BUT,
    It is just a plain HTML with data, and no colors or
    borders !!
    Regards,
    vivek

  • I have a HP PSC 2210 all-in-one. Can I print a status page that shows count of pages printed?

    I said everything in the subject except, if there is a status page printing capability how do I do it,

    Hi there,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • How do I adjust the printing preferences? all my pages print in miniature when I use Firefox and try to print from a webpage.

    I cannot print from any webpage, including my hotmail account, without the page printing at about 20% of the normal size. If I use Explorer, I have no problems with printing.

    Well, I tried your suggestion, and it did increase the font size, but it will only print within the top half and about the middle 1/3 of the page. So, to print something that should fit on one page, it would take 3 to 5 pages....I tried looking at the margins and they were all set to 0. changing them to 1 inch didn't help...any other suggestions?

  • How to get the total number of pages printed in a report?

    Hi All,
    I have a requirement where I need to print a frame of fields only in the last page. Unfortunately I cannot use the 'Print Object On' property as it doesnt work in my case. So, I am planning to write a format trigger on the frame to return TRUE if the page is the last physical page. Now, I need to know how to get the total number of physical pages that will get printed in the report so that I can use this to manipulate the frame. I was planning to use the 'Total Physical Pages' built-in, but it seems like I can just use it to print in a field and I can't use this field's value anywhere in the plsql code (formula column function/format trigger) in the report. Is there anyway to get the total number of pages printed in the report which can be used in the report plsql code?
    Thanks,
    Srini.

    i found the solution, thanks

  • Why aren't my pages printing to fit the page? HP Officejet 4622

    When printing from cell phone with hp eprint app, or ipad2 with hp eprint app and/or airprint, the pages printed are much smaller then 8" x 11".  I have checked all the settings (actual printer and phone/ipad app settings) and everything says it is set to print on 8" x 11" which is the same size paper i have in the printer. However the pages are only being printed out at about 6" x 8". The text is very small and the whole page is about 3/4 as small as it should be. I have already changed the settings to print on legal size paper and still no difference
    EDIT: i would also like to add that these are attachments im opening up through email into adobe pdf format. i have been playing around with the settings within adobe on my desktop and its still printing much smaller. i select the "Fit to printable area", and played around with the "Choose paper source by PDF page size" and still no difference

    I will need a little more information. What type of document are you printing? ePrint prints actual size. Is it an image of a document that you are printing?  Have you tried resizing the document? 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Safari 7.0.6, using Adobe Acrobat 11.0.10, aren't rendering pdf files in the Print Preview screen.  Additionally, only a single, blank page prints for a multi-page pdf document.  Any ideas?

    Safari 7.0.6, using Adobe Acrobat 11.0.10, isn't rendering pdf files in the Print Preview screen.  Additionally, only a single, blank page prints for a multi-page pdf document.  Any ideas?

    Figured it out.  It had nothing to do with the software levels of Safari or Adobe Acrobat.  Here's the fix:
    Open Finder/Applications
    Search "Internet Plug-Ins"
    Move any Adobe plug-ins to the trash
    Quit Safari
    Launch Safari
    Your pdf document should now render in Print Preview and print properly.

  • When I print a pdf file, the first page is dramatically  reduced in size while remainder pages print correct size. How do I fix this pro blem?

    recently, when printing pdf files, the first page prints out as 1/10 or 1/20th original size while rest of document prints correctly.
    I have no idea how this happened or why and I have no idea how to fix. I cannot get the first page of any pdf doocument to
    print correctly and thus, I am virtually unable to print pdf files.

    Sometimes if a .pdf is smaller than actual 8 1/2 x 11 or bigger, you'll either get way too much of the image and it's cut off, or the image is too small. You should also try to do this in the print driver window: Properties -> Advanced -> Image Options -> Disable "PostScript pass-through"

  • Printing Problem - Incomplete multiple page print job - until paper runs out

    I'm on Mac OS 10.9.3 printing to a Samsung CLX-6250FX. This is a network printer used by all the Apple/Window computers in this office.
    I am having terrible problems recently with printing multiple page documents - excel, word, email, pdf etc. I am spending a fortune in paper and printer cartridges.
    The print job does not complete and the last page printed, the following message prints:
    ERROR: syntaxerror
    OFFENDING COMMAND: true        cvt      Tfpgm     nglyf      '   ^  head
    STACK:
    -mark-
    /sfnts
    Then the same printer job restarts and fails at the same point until the printer tray runs out of paper (unless the print job is aborted and/or the printer is turned off and turned on again)!!
    The specific error message displayed by the printer software is either "Remote host did not accept data file (32)" or "Remote host did not accept data file (105)".
    I haven't seen any pattern whatsoever in terms of application used.
    I have deleted the printer and reloaded the driver from the disk supplied with the printer. I have checked to see that I am running the most recent driver.
    I've already reset the printing system, but that didn't fix it.
    I have seen this problem on various support communities pages, but for different printers.
    I have yet to see a solution - Any other recommendations please?

    The error message you see printed is a Postscript error. With your printer, postscript (normal output type from applications) is converted to the printer's page description language before being sent to the printer. So, I believe the problem is in some part of the driver software.
    For first step, I would try restarting from the Recovery partition and repair the hard drive using Disk Utility. You can repair permission, too. This is trying to correct a corrupted file.
    http://support.apple.com/kb/ht4718
    (just read the first paragraph)
    If that doesn't fix it, I would try downloading and installing the latest driver for the printer.
    Come back for more if that still doesn't work.

  • Blank Page prints even though "Suppress Printing If No Records" option is t

    Blank Page prints even though "Suppress Printing If No Records" option is thicked.
    My environment:
    Crystal Report Developer Full version 11.5.11.1470
    Windows Server 2003 SP2 32-bit.
    We have a third party vendor application written in Java -let's call it "print deamon", but my company doesn't have access to the source code.
    The print deamon essentially listens to the core application which is located remotely, receive some print instructions such as label name, printer name, crystal reports version (8.5 or 11) and a few parameters that are passed to the crystal report template.
    When the version is Crystal Reports 11 and the template is open and query is executed (using Oracle JDBC) and if the template's query does not retrieve any rows, a blank page still prints even though the option to suppress printing is thicked.
    With Crystal Reports 8.5 version, we have no issues.
    recycling the blank page is not an option in our high volume print environment, these paper and labels are wasted big time, third party vendor says this is an issue with crystal reports XI api.
    These are some of the libraries the Print Deamon uses:
    09/25/2009  10:29 AM         2,055,844 cecore.jar
    09/25/2009  10:29 AM           211,919 celib.jar
    09/25/2009  10:29 AM           830,301 corbaidl.jar
    09/25/2009  10:29 AM           371,142 CRDBJavaServerCommon.jar
    09/25/2009  10:29 AM           121,413 CRDBXMLServer.jar
    09/25/2009  10:29 AM           670,312 CrystalCharting.jar
    09/25/2009  10:29 AM             2,162 CrystalCommon.jar
    09/25/2009  10:29 AM            94,290 CrystalContentModels.jar
    09/25/2009  10:28 AM           110,657 CrystalDatabaseConnectors.jar
    09/25/2009  10:29 AM           686,963 CrystalExporters.jar
    09/25/2009  10:29 AM            67,807 CrystalExportingBase.jar
    09/25/2009  10:29 AM           581,270 CrystalFormulas.jar
    09/25/2009  10:29 AM           330,909 CrystalQueryEngine.jar
    09/25/2009  10:29 AM         2,271,217 CrystalReportEngine.jar
    09/25/2009  10:29 AM           453,829 CrystalReportingCommon.jar
    09/25/2009  10:29 AM         1,985,441 ebus405.jar
    09/25/2009  10:29 AM    <DIR>          external
    09/25/2009  10:29 AM           227,996 jrcadapter.jar
    09/25/2009  10:29 AM             9,988 jrcerom.jar
    09/25/2009  10:29 AM            94,180 keycodeDecoder.jar
    09/25/2009  10:29 AM           448,627 MetafileRenderer.jar
    09/25/2009  10:29 AM           380,520 rasapp.jar
    09/25/2009  10:29 AM           843,544 rascore.jar
    09/25/2009  10:29 AM           283,131 ReportPrinter.jar
    09/25/2009  10:29 AM           793,445 ReportViewer.jar
    09/25/2009  10:29 AM            95,382 rpoifs.jar
    09/25/2009  10:29 AM            40,545 Serialization.jar
    09/25/2009  10:29 AM             3,777 URIUtil.jar
    Let me know if there's anything we can do before engaging our third party vendor to produce their source code.
    Thank you - Kleber

    It's not relavent now is it? Do what ever works in CR XI.
    Also you may want to upgrade to CR XI R2. Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
    Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
    Once updated you can then go to the Keycode site and get a XI R2 keycode to enable oll of the features.
    Thank you
    Don

  • When scaling in page setup, 1st page prints correctly, but subsequent pages do not scale correctly/too large for the paper, parts of the text missing

    When trying to print in Firefox, and when scaling the page size in page setup, the first page prints correctly, but subsequent pages do not scale correctly and are too large for the paper, with parts of the text are being cut off at the top and right. This is not fixed by checking or un-checking the "ignore scaling/shrink to fit page width" in the print window, or by changing the scaling%.
    I am running Firefox 15.0.1, on Mac OS 10.5.8.
    The same problem happens in the print preview and if I save the print as a .pdf
    I have tried all the fixes in the how to's and others in various forums with no improvement.
    This happens every time I try to print a document scaled up or down only in Firefox.

    The 2nd page print scaling error has been an issue with Firefox on the Mac since 2011. People at Mozilla have not considered this a major problem. Try printing anything at less than 100% and you'll quickly see how every page after the first page being scaled wrong gets old real fast. The lack of a solution to this issue forced me long ago into using Safari as my primary browser. Good luck waiting until version 21 for a solution. Current release is 18.0.2.

  • When printing from an online PDF, the page prints in extra large scale. How do I fix this?

    when printing from an online PDF, the page prints in extra large scale. How do I fix this?

    This can happen when Firefox has misread the paper size from the information supplied by Windows. Clearing it can involve finding some obscure settings, but here goes:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box above the list, type or paste '''print''' and pause while the list is filtered
    (3) For each setting for the problem printer, right-click and Reset it. The fastest way is to right-click with the mouse and then press the r key on the keyboard with your other hand.
    Note: In a couple other threads involving Brother printers, the preference '''printer_printer_name.print_paper_data''' was set to 256 and when the user edited it to 1 that fixed the paper size problem. If you see a 256 there, you can edit the value by doubling-clicking it or using right-click>Modify.

  • Why does the new version not print properly? The left half a page prints in a 2 inch column.

    When we try to print coupons or articles only the left half of the page prints in a 2 inch column in the middle of the page. This started when I downloaded the latest version of Firefox. When we print from Internet Express, everything prints fine.

    Check your margin settings.
    Type '''about:config''' in the URL bar and hit Enter.
    ''If you see the warning, you can confirm that you want to access that page.''
    Filter = ''margin'' - then look at the left and right margin settings for any that look grossly incorrect - the setting is in inches. Some users with that problem have reported settings like 2.7235879 - IOW a very long numeric string after the decimal point.
    Right-click the Value and select Reset or Modify. 0.5 or 0.25 are appropriate settings if you elect to Modify.

  • Multiple pages in SP01 (spool) but only last page printed to printer.

    Dear Experts,
    Here is a strange situation. I have 28 pages in one spool request, but when I print it out, only the last page printed out... Where are the 27 pages? Even though I use printing setting (From page 1 to page 28), it still printed last page only...
    Can any one teach me how to solve this problem?
    Thank you!
    Joanne Wu

    format setting was wrong.

Maybe you are looking for