Page protction check box is disabled in smartform

Hi Everybody.
I need to have pageprotection for a table node in smartform.
The issue is the pageprotection check box is disabled in outputoptions of table node.I tried to create a folder & put this table node inside the folder. Then also the pageprotection check box is diabled in outputoptions of my folder. Pls guide me in resolving this issue. Do we have any other go to have page protection for the table node.Table node is must in my requirement.
Thanks in advance.

Hi Mohammed,
                   I think Page protection is not possible inside the table node it wont work.
                          Better create seperate templates for header data and main area,footer .you can create loop for main area and try page protection command inside the loop.
     Hope you can get your result..
Thanks
Anil.D

Similar Messages

Reg: Page Protection Check Box in Smartform

Hi,
In the folder node of the smart form, i want to use the check box ' Page Protection'. But the check box is disabled. Can any one guide me how to enable the check box. Thanks in advance.
Rgds,
Nagendra Prasad.J

Hi,
I did like that,
I created one folder and I selected the checkbox in output options.
when I am trying to create "TABLE" in that folder, it's automatically resetting the checkbox.
error text "Page protection for node %FOLDER1 was reset"
Plz. suggest me.......!
Thanks & Regards
Rajendra

The "Without Qty Posting" check box appears disabled in A/P and A/R credit Memo Rows

Dear All,
The "Without Qty Posting" check box appears disabled in A/P and A/R credit Memo Rows even when set visible and active in the form settings. Please advice. SAP Business One version 8.82 PL 13
regards
Deb

Hi,
Please check:
The field is available only in the following
cases:
1. A/R credit memos not based on other documents or
2. A/R credit memos based on an A/R invoice or
3. A/R credit memos based on an A/R reserve invoice, for which items have been delivered, and
4. if non-drop-ship warehouses are used
Thanks & Regards,
Nagarajan

J1iex duty rate tab calculate excise base rate check box is disable in impo

Hi,
We have done Import PO and wrt we have done the GRN as part 1 and we try to complete the part 2 as J1iex, but in j1iex duty rate tab calculate excise base rate check box is disable, we required is activate.
its working in domestic scenario.
Thanks
shital

Go to J1IEX- Change (Instead of Post). Try & change the rate.
But why do you want to change it in J1IEX? as duties are flowing from PO-MIRO.

Check box type square in Smartform

How can we print a small sqare (like a check box) in the smartforms?
I need these boxes in front of
cash
dd
cheque
The use can tick this by pen on the hard copy
Thanks

Hi,
you can use either any one of the follwings in your text elements.
<727>
<2039>
in the print preview, it wont be visible. but when you take the print on the paper you will see the check box.
<REMOVED BY MODERATOR>
regards,
balu
Edited by: Alvaro Tejada Galindo on Apr 22, 2008 4:01 PM

Page title and page name check box

Hi there,
if I need to change the page title starting from the page name, by default equals, it would be more efficient and helpful, from UI/UX point of view, to keep the page name in the text area of page title, when un-checking the check box below, rather than deleting it.
The idea is that you will most probably change few parts of the text already herited form the page name.
Regards
Giulio

Giulio-
Your suggestion makes sense, we will look into changing the behavior. The "Filename" edit box just below has the same issue.
Thanks,
Paul

How to create a page with check boxes

Hello friends
I want to create a page with 5 statements and 5 checkboxes. The next page will be displayed only if all the 5 checkboxes are checked.
Can you please let me know how to create the page (could not find any template for this!) and how to control the display of the next page through checkboxes.
I am on version 4.7 of R/3 and EP 6.0.
This is urgent, prompt reply would be greatly appreciated.
thanks
pomila

Hello Michael
Thanks for your prompt reply, your answer was indeed helpful.
Just another quick question, does EP 6.0 have any template/iview which we can use or it has to be done through coding only?
thx
pomila

Dialog page from check box

Hi,
i am trying to display a dialog page when user select/unselect a checkbox. i am able to launch the dialog page using the below code
UIViewRoot root = context.getApplication().getViewHandler().createView(context,"/app/selectionvalidationDialog.jsp" );
afContext.launchDialog(root, null, valueChangeEvent.getComponent(), true, null);
but i need to use the returnListener . how can i do that

Hi Frank,
I am facing a problem very much same as user502048 has posted.
The dialog I want to launch didn't have "button's returnListener" (and in my case maybe not a good idea to add it because many people using it... I don't want to modify....).
I am wondering, is there away I can "register an Action" so that it can "return" at some method in the same page ? I tried to use "BindingMethod" ... but it didn't work (I don't have the code on the computer I am using right now, but if you want to see the code I have, I can post it later..)
Any advice would be really appreciated.
Vu.

Urgent ! how to put check box in the smartform

<b>can anyone tell me how to display a check box (unselected) in the smartform.....</b>

Hi,
Try this.
Change the editor to 'PC Editor' and take the menu.
Include -> Characters -> SAP Symbols
Check this also.
Re: How to create checkbox in smartforms??
Message was edited by: Jayanthi Jayaraman

Disable the check box

Hi All,
I have a requirement in which based on the profile option user should be able to change the value of check box.
Name of profile option is acces_level. In this user level profile option two values are possible 'User' or 'Administrator' and there are two check boxes cb1 and cb2. I want that cb2 should be available only to the user, those have value of profile option as 'Administrator'. cb1 will be available for all.
Thanks in advance.
Looking forward onn this.

I used now
declare
nProp varchar2(20);
BEGIN
nProp := fnd_profile.value('ACCESS_FOR_WISPER_PART_RESEND');
if nProp = 'ADMINISTRATOR' then
set_item_property('XXINFC_WISPER_PARTS_MASTER.INSPECTION_FLAG', enabled, 'property_true');
else
set_item_property('XXINFC_WISPER_PARTS_MASTER.INSPECTION_FLAG', enabled, 'property_false');
end if;
END;
I am writing this in WHEN-NEW-FORM-INSTANCE trigger at data block level.
Now there is only one problem. In the form I am displaying 15 values. All 15 values have there respective check boxes. Now except first check box all other check boxes are disabled. Do you have any clue why the first cbox is not disabled. There is one more thing when profile option is set with value USER (Now it should allow to update the check box) then If I change any cbox then it does not allow me to change any other check box.
Looking forward for you reply.

Print Check Box In MIGO

Hi ALL,
I'm having an issue with print check box in migo .
I created a po and i created a material document(i.e Goods Recipt) in MIGO using the PO nUMBER. I made sure i selected Collective Slip and Print Check Box enabled and posted the document and when i went back to PO and looked at PO History and clicked on the GR Receipt it shows me the Material Document but for some reason the Print Check box is disabled .
Again this happens if i create a po with one particular plant and if i use any other plant it works fine and print check box remains enabled.
I made sure in OMJ3 ,WA03 AND WE03 i have the Plant,St Loc and Printer for the plant WHICH IS CREATING PROBLEM.
Let me know if i'm missing something in here
Thanks
Venki

Hi all,
The same movement type works for all other plants except for one plant .
No matter what movement type is, this plant is always disabling the print chek box for some reason.
Let me know
Thanks

Problem with custom sharepoint designer approval workflow - check box: 'Start this workflow to approve publishing a major version of an item' is greyed out

I wanted to create a simple approval workflow. Hence I opted to start from scratch rather than copy the OOTB approval WF. Using SharePoint Designer (not Visual studio) I created a reusable workflow and have added the built in 'Start approval process' action.
It's saved and published globally.
Everything works fine except that when associating the WF with a list the 'Start this workflow to approve publishing a major version of an item' check box is disabled.
Major and minor versioning is enabled for the library.
What am I missing here? Or do I have to start from the OOTB approval WF to get this to work?
Regards
Henning

Again - new ideas pop up right after defining the issue as a problem. :-) Problem solved!
I solved this by creating a new workflow from the original publishing approval workflow (copy and replace), but instead of tweaking the already defined approval process (WF action) I deleted it, then deleted all initiation form and local variables,
and then added the 'Start approval process' action again. This re-installs all the necessary local variables without any initiation form involvement, which is just what I want.
From here I can tweak the workflow to make it more user friendly, much like
described by Bobby Chiang in his great blog.
Remember to add action Set Workflow Variable 'EnableContentApproval' to Yes right before the Start Approval Process action, else the document's status won't be set to 'Approved' or 'Rejected' as an output of the workflow.
Learning every day!
Henning

Check box Calculate Excise Duty base on rates in J1IEX

Hi,
In J1IEX Duty rates tab, there is one check box as Calculate excise duty base on duty rates , but thta check box is Disable i How to make it as enable so that we can click to to recalculate the excise rate,
also my problem is that in case of import PO, the basic price in our PO is diffrent compare to basic price of custom . because custom is addding the basic frieght and insurance charges in Basic price, so while Doing J1IEX ref. to MIRO number it is taking properly amount of all excise duties but excise base amount is diffrent and when we correct the excise base amount as per custom Bill of entry all excise amount are change and it is not coming as per duty rates which are present i Duty rates tab so I want to recalculate it.
regards,
zafar

Hi,
Can you help on this issue.
regards,
zafar

Calculate Excise amount as per duty rates check box in J1IEX

Hi,
              In J1IEX Duty rates tab, there is one check box as Calculate excise duty base on duty rates , but thta check box is Disable i How to make it as enable so that we can click to to recalculate the excise rate,
also my problem is that in case of import PO, the basic price in our PO is diffrent compare to basic price of custom . because custom is addding the basic frieght and insurance charges in Basic price, so while Doing J1IEX ref. to MIRO number it is taking properly amount of all excise duties but excise base amount is diffrent and when we correct the excise base amount as per custom Bill of entry all excise amount are change and it is not coming as per duty rates which are present i Duty rates tab so I want to recalculate it.
regards,
zafar

Hi ,
             As per detail which I have mention in my question, the process which we are following is after recieving import Material   first we are doing   MIRO for custom delivery cost   and there we are entering tax amount as per custom bill of entry,   and we are getting the MIRO Documnet number    after that we are Doing    Capture Excise invoice thorugh J1IEX and ref. document we are selecting as PO, after pressing enter we get a small pop up window as customs invocie number and year there we are entering the MIRO document number and Year   then ref. to that miro number All duty and duty rates are coming as per MIRO   but Excise base amount is different because it is coming from PO basic amount and there is diffrence between Custom excise base amount and PO bae amount becasue in custom bae amount they are adding frieght basic amount into excise base amount , and then we have to correct amnually exsice base amount in J1IEX   for all materials, is this proceess is same in all or we need to do some modification in pricing procedure or at any other place .
          At bottom in excsie duty tab in J1IEX there is one check box as Calculates excise amount base on excise duty but that check box is also disable   How to make that enable.
I also have found one FM : J_1IEX_DEFAULT_EXCISE_DUTY,   by doing some changes in this FM we can get what we requied , is there any other solution to get our requirement.
regards,
   zafar
Edited by: zafar_karnalkar on May 15, 2010 1:47 PM

Cannot send color video. ColorEnable check box is ...

Hi,
I Cannot send color video. ColorEnable check box is disabled.
I know the camera allows color but Skype does not allow me to set it up.
Any ideas?
Thanks in advance!

Please, run the DirectX diagnostics tool (32-bit option).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Page protction check box is disabled in smartform

Similar Messages

Maybe you are looking for