Page Selection in VA02 - Issue to Output

Hi All,
User want to goto->va02->from the menu select 'issue output'->select the codition type in the displayed popup->after this user want to select only select pages for print.
Can anyone suggest on this.
Regards,
Praveen

Hi Kc,
1. But it didn't worked
   Well, how did u detect it ?
2. Whenever we give suppose page 4,5
   it will print TWO pages.
   It will even show PAGE1, PAGE2.
3. To actually know its working or not,
   first print all pages.
  and NOTE DOWN THE SEQUENCE OF the fields
  page by paage.
4. Now when u print 4,5 pages,
   U will note that,
   only those data / fields
   will come
   which were there on 4th, and 5th page
   in point no. 3.
  (however, it will show page 1 of2, 2 of 2.)
  It will never show
  Page 4 of 10
  Page 5 of 10.
regards,
amit m.
Message was edited by: Amit Mittal

Similar Messages

  • Page numbers not appearing in PDF output past a certain point

    Hi.  I have a very large book layout in Aperture (> 300 pages) which I output to a PDF file (using the Print button followed by selecting PDF).  I have successfully done this many times in the past, but there have occasionally been times when Aperture's output just stops including page numbers past a certain point.  I think what it's doing is deciding on white page numbers for the rest of the book, which doesn't work so well when the background is white.  (I can see this because there are occasional pages which are full bleed, and the page numbers appear in white on those pages).
    Has anyone else come across this?  I have seen this problem for years (Aperture 1, Aperture 2).  The solution seems to be to carefully modify the page layout so that no elements impinge on the location of the page number.  But doing this does not always solve the problem.  Just this morning I duplicated a page, changed its content, then output and... the page numbers just stopped in the output 30 pages *after* this page.  I just changed the page to move a text element up, hoping that this would solve the problem, and now... page numbers stop at page 263 instead of page 98.
    This is a very bizarre and annoying bug.  Extremely annoying.  I am not going to print a book which has page numbers in only the first half or 3/4 of the book.  But if there is no workaround, and Apple seems not to have noticed the problem, I could be stuck.
    Has anyone else seen this?  Any suggestions?  How can I report the bug to Apple?  I can't very well give them the output as an example, as it's about 800 MB.

    Hi leonieDF.  Thanks for your reply!  I didn't know about the "Provide Aperture Feedback" link.
    Alas the Theme is a custom one, it's 9"x11.5" so that the result is 8.5x11" after chopping off 1/4" from all sides.  (The printer does "full bleed" with 1/4" margins).  I originally created it by hand for Aperture 1.5, by simply copying one of the themes and adjusting the dimensions.  (Custom themes weren't possible until Aperture 2, if I remember correctly).  Perhaps that's the source of the issue.  Though I'm not sure how...
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
        <key>pageNumberMargin</key> <string>{4.5,0.35}</string>
        <key>bottomMargin</key>     <string>0.6</string>
        <key>insideMargin</key>     <string>0.6875</string>
        <key>horizontalSpacing</key>    <string>0.05</string>
        <key>verticalSpacing</key>  <string>0.05</string>
        <key>size</key>         <string>(9.00,11.50)</string>
        <key>backSoftcover</key>
        <string>01_BackSoftcover</string>
        <key>defaultTextStyle</key>     <string>Baskerville/14/BlackBackground</string>
        <key>disableFrameScaleAndRotation</key>
        <true/>
        <key>frontSoftcover</key>
        <string>01_FrontSoftcover</string>
        <key>indexPages</key>
        <array/>
        <key>leadingPages</key>
        <array>
        </array>
        <key>repeatingPages</key>
        <array>
            <string>OnePageBleedLayout</string>
            <string>1UpLayout</string>
            <string>1Up2UpLayout</string>
            <string>2UpLayout</string>
            <string>1UpLayout</string>
            <string>OnePageBleedLayout</string>
            <string>1UpLayout</string>
            <string>1UpLayout</string>
            <string>4UpLayout</string>
            <string>5AcrossArrayLayout</string>
            <string>6AcrossArrayLayout</string>
            <string>TwoPageBleedLayout</string>
            <string>2Up1UpLayout</string>
            <string>1UpLayout</string>
        </array>
        <key>trailingPages</key>
        <array/>
        <key>type</key>
        <string>Custom</string>
        <key>version</key>
        <integer>1</integer>
    </dict>
    </plist>
    (Standard themes are in /Applications/Aperture.app/Contents/Resources/Book Themes, custom ones in ~//Library/Application Support/Aperture/Book Themes )

  • I need the dialog box (which contains page selection etC) HOW TO MAKE IT?

    hi
    i have done an requirement in smartforms.
    i need the dialog box (which contains output device name, page selection etc) when i take the print (smartforms).
    And now i already can see a dialog box .but still it doesn't have the page selection.
    I mean if the smartforms which have 5 pages,and what i need is just print the page 1 and page 3 . so I need the page selection
    which can help me on this issue. 
    Would anyone know something about it  and give me some advice . I will be appericate it.

    Hi,
    Just check with the control parameters of the function module, if you have changed any of it.
    If you have changed it then try to give the no-dialog field of the control parameter table as space.
    If the dialog box which gives you the Output device name and others appears then just below the output device name you have the column for the page selection.Just pass the values of the pages separating them with comma(like 2, 5 will print second and fifth pages) and it prints only those pages.
    Regards
    Sarves

  • Document could not be printed - no pages selected to print

    I am running into this well-known issue with several documents, but unfortunately none of the fixes I have come across have worked. Some background:
    -Using Windows 7 Pro
    -Happening with both Adobe Reader XI and Acrobat X, clean installs. and happening on multiple computers, with multiple printers, with multiple domain users.
    -Have tried repairing both installations, no success.
    -Have tried disabling protected view, changing size of the fit, letting printer determine colors, printing in greyscale, changing setting for "view documents in PDF/A mode" to "never."
    -Print as image works, but quality is unacceptable.
    -It seems to be isolated mainly to Xerox printers, as I have no issues printing to an HP printer. I am trying different models of Xeroxes with no success, however. I have reinstalled printer driver and verified updated driver for all, issue persists. Printer models are Xerox ColorQube 8700X and 9203
    -The PDFs are from different sources, so I can't pinpoint it to one website. Documents contain various financial info, so I can't post here. Any help would be appreciated. I'm probably going to have to try a different pdf reader for these, but that is not ideal, since multiple people need to print these and are comfortable using Adobe software.

    I was also receiving the message "The Document Could Not be Printed" I am on 10.6.4 with Acrobat 9.4.1. I did not get the second part of the message though "There were not pages selected to print". Anyway, I got mine to work by going to Preferences - Print & Fax. I selected my printer and clicked Options & Supplies. Under the driver tab I changed the "Print Using:" box to Generic PostScript Printer. I'm not sure if this is what you are supposed to do. I'm not an expert but it worked for me so I am going with it.

  • Document cannot be printed, no pages selected

    Using Win 7 & Adobe XI. Trying to print pdf's created years ago. Trying to print pdf attachments received in emails. Get error message "The document cannot be printed" & "There are no pages selected to print". Have tried printing as "Image". Have tried printing to multiply printers. Have download Adobe Reader and restarted CPU. I can print Adobe test page OK. Problem started Monday Jan 26, 2015. Printed fine on Friday Jan 23, 2015. No changes in any programs or software in last 3 months other than Adobe Reader download in attempt to correct issue.
    Any suggestions
    Ichabod6957

    Try the following: open Adobe Reader | Edit | Preferences
    under Documents, change 'View documents in PDF/A mode' to Never
    under Security (Enhanced), disable Protected Mode at startup

  • Can not print.  Error message "no pages selected"

    Help, my computer upgraded to the latest adobe reader, and now it wont print.  When I go to print I get the message "unable to print because no pages were selected"  I have read some things on here that said to uncheck the secure printing.  I have done that and still get the same message.  Any help will be appreciated

    Here is a link to some good things to try for this problem:
    "No Pages Selected To Print" Error - KHKonsulting LLC
    AS Pat says, more info can help us zero in on your issue.
    mh++

  • Printer will no longer print PDF document--"no pages selected" although specific pages were selected?

    Brother printer will no longer print PDF document--"no pages selected" although I did specify pages.  Have reviewed and tried Adobe trouble shooting, not helpful.  Cannot print page as image.  Brother says to contact Adobe

    There may be some security issues related to the USPS PDFs.
    http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
    I can't help with the scan/print problem. You seem to have done everything I would try.
    I don't know if maybe using a registry cleaner would help.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • "The Document Could Not be Printed" "There were no pages selected to print"

    OSX 10.6.6
    Acrobat Pro 9.4.1
    I am getting this error when printed from certain PDF files. My best guess is it is a font conflict because if I change the font in the document and re-export the file the document prints fine. But changing the font (and it happens with multiple fonts) is not an option.
    Most of my documents are very large (up to 1,500 pages) and I use an InDesign plug in to merge data to create my PDFs.
    I can print the document out of InDesign CS3 without any problems. If I open the file in Apple's Preview it prints or if I log out and log back in under a different user it prints.
    But when this documents are printing out of acrobat I get those errors. It won't print to any of my mupliple printers (USB or network).
    Spent an hour on the phone with Adobe today and got no answers at all. They are telling me it a corrputed user issue. (that is only effected in acrobat when printing certain documents.... OK).
    With all the messing around I have done I'm guessing it has something to do with certain fonts during the export of the PDF from InDesign.
    If anyone has any ideas or suggestions, please let me know. I have been fighting with this issue for a while now and today it is causing a major issue.
    Just let me know if you need any additional information and thanks in advance for your help.
    Coyote

    I was also receiving the message "The Document Could Not be Printed" I am on 10.6.4 with Acrobat 9.4.1. I did not get the second part of the message though "There were not pages selected to print". Anyway, I got mine to work by going to Preferences - Print & Fax. I selected my printer and clicked Options & Supplies. Under the driver tab I changed the "Print Using:" box to Generic PostScript Printer. I'm not sure if this is what you are supposed to do. I'm not an expert but it worked for me so I am going with it.

  • Sometimes I cannot select an airport express to output sound from a current model mac air/10.9.3. The output jumps back to internal speakers or apple tv. Any ideas?

    Sometimes I cannot select an airport express to output sound from a current model mac air/10.9.3. The output jumps back to internal speakers or apple tv. Any ideas?

    Hello Cloud19,
    The article linked below provides some helpful information and troubleshooting that can help resolve issues with AirPlay and your Airport Express.
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS5209
    Cheers,
    Allen

  • Document could not be printed - no pages selected

    I attempted to print a range of pages of a pdf document. Acrobat says the document could not be printed because there were no pages selected to print. This was not true. I was able to print a range of pages from Apple Preview, so that means the file is OK. Therefore, Acrobat Pro has a bug. I am using Yosemite on my iMac, with Acrobat XI.

    Hi -
    Maybe this will help others get around or solve this issue. I was trying to print a 67MB PDF created in INDD (similar to others created and printed that day) and got the same messages as other posters:
    Document could not be printed
    There were no pages selected to print (even though All was selected)
    I updated to 11.0.10 and continued to get these messages.
    Ultimately Distiller was the solution.
    cheers all

  • How can I fix a printing problem: message cannot print document: "no pages selected to print" when printing a pdf file.

    I am having problems printing a pdf document. When I select a file to print and try to print it says that "no pages selected to print". The default all pages was selected by me but the message keeps coming up. I recently installed adobe reader version 11. Rebooted the computer but sitll having issues printing docs.
    Jerseyguy

    Hi Pat.
    Yes, both of them lead to the very same error.
    I have a workaround, kind of, where I preview the document and select all the pages that are correct (read showing on the pages preview) as included in the 1st screenshot.
    As you can see in the first screenshot, the 5th page seems to be non-existandt, however as I try to preview it from the 3rdP software, it comes up just fine and from there I can print it individually... just annoying when you have 50 pages and 6 of then are randomly not showing up.
    If I try to print the whole document, it simply gives me the 2nd, 3rd and 4th screenshots.
    As for the 3rdP software, as stated in prior posts, it has been working flawlesly for the last 5 years, and has not been updated in any way, shape of form... As you said, maybe it wouldn't be a bad idea to look into that, however I don't believe the contract for the software maintenance is still in effect...
    Thanks.

  • Selecting a row in the output of alv grid

    hi,
    how do i select a row in the output of alv grid?plz help...
    regards,
    sheeba.

    Hi,
    Please refer the code below:
    *& Report  ZDEMO_ALVGRID_SELROW                                        *
    *& Example of a simple ALV Grid Report                                 *
    *& The basic ALV grid, Enhanced to display capture each row a user has *
    *& selected                                                            *
    REPORT  zdemo_alvgrid_selrow                 .
    TABLES:     ekko.
    type-pools: slis.                                 "ALV Declarations
    *Data Declaration
    TYPES: BEGIN OF t_ekko,
      SEl,                         "stores which row user has selected
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      statu TYPE ekpo-statu,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
      menge TYPE ekpo-menge,
      meins TYPE ekpo-meins,
      netpr TYPE ekpo-netpr,
      peinh TYPE ekpo-peinh,
    END OF t_ekko.
    DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_ekko TYPE t_ekko.
    *ALV data declarations
    data: fieldcatalog type slis_t_fieldcat_alv with header line,
          gd_tab_group type slis_t_sp_group_alv,
          gd_layout    type slis_layout_alv,
          gd_repid     like sy-repid.
    *Start-of-selection.
    START-OF-SELECTION.
    perform data_retrieval.
    perform build_fieldcatalog.
    perform build_layout.
    perform display_alv_report.
    *&      Form  BUILD_FIELDCATALOG
    *       Build Fieldcatalog for ALV Report
    form build_fieldcatalog.
    * There are a number of ways to create a fieldcat.
    * For the purpose of this example i will build the fieldcatalog manualy
    * by populating the internal table fields individually and then
    * appending the rows. This method can be the most time consuming but can
    * also allow you  more control of the final product.
    * Beware though, you need to ensure that all fields required are
    * populated. When using some of functionality available via ALV, such as
    * total. You may need to provide more information than if you were
    * simply displaying the result
    *               I.e. Field type may be required in-order for
    *                    the 'TOTAL' function to work.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'Purchase Order'.
      fieldcatalog-col_pos     = 0.
      fieldcatalog-outputlen   = 10.
      fieldcatalog-emphasize   = 'X'.
      fieldcatalog-key         = 'X'.
    *  fieldcatalog-do_sum      = 'X'.
    *  fieldcatalog-no_zero     = 'X'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'EBELP'.
      fieldcatalog-seltext_m   = 'PO Item'.
      fieldcatalog-col_pos     = 1.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'STATU'.
      fieldcatalog-seltext_m   = 'Status'.
      fieldcatalog-col_pos     = 2.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'AEDAT'.
      fieldcatalog-seltext_m   = 'Item change date'.
      fieldcatalog-col_pos     = 3.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MATNR'.
      fieldcatalog-seltext_m   = 'Material Number'.
      fieldcatalog-col_pos     = 4.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MENGE'.
      fieldcatalog-seltext_m   = 'PO quantity'.
      fieldcatalog-col_pos     = 5.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MEINS'.
      fieldcatalog-seltext_m   = 'Order Unit'.
      fieldcatalog-col_pos     = 6.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'NETPR'.
      fieldcatalog-seltext_m   = 'Net Price'.
      fieldcatalog-col_pos     = 7.
      fieldcatalog-outputlen   = 15.
      fieldcatalog-do_sum      = 'X'.        "Display column total
      fieldcatalog-datatype     = 'CURR'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'PEINH'.
      fieldcatalog-seltext_m   = 'Price Unit'.
      fieldcatalog-col_pos     = 8.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    endform.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
    *       Build layout for ALV grid report
    form build_layout.
      gd_layout-box_fieldname     = 'SEL'.
                                     "set field name to store row selection
      gd_layout-edit              = 'X'. "makes whole ALV table editable
      gd_layout-zebra             = 'X'.
    endform.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
    *       Display report using ALV grid
    form display_alv_report.
      gd_repid = sy-repid.
      call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_program      = gd_repid
    *            i_callback_top_of_page   = 'TOP-OF-PAGE'  "see FORM
                i_callback_user_command = 'USER_COMMAND'
    *            i_grid_title           = outtext
                is_layout               = gd_layout
                it_fieldcat             = fieldcatalog[]
    *            it_special_groups       = gd_tabgroup
    *            IT_EVENTS                = GT_XEVENTS
                i_save                  = 'X'
    *            is_variant              = z_template
           tables
                t_outtab                = it_ekko
           exceptions
                program_error           = 1
                others                  = 2.
      if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    endform.                    " DISPLAY_ALV_REPORT
    *&      Form  DATA_RETRIEVAL
    *       Retrieve data form EKPO table and populate itab it_ekko
    form data_retrieval.
    select ebeln ebelp statu aedat matnr menge meins netpr peinh
    up to 10 rows
      from ekpo
      into corresponding fields of table it_ekko.
    endform.                    " DATA_RETRIEVAL
    *       FORM USER_COMMAND                                          *
    *       --> R_UCOMM                                                *
    *       --> RS_SELFIELD                                            *
    FORM user_command USING r_ucomm LIKE sy-ucomm
                      rs_selfield TYPE slis_selfield.
    * Check function code
      CASE r_ucomm.
        WHEN '&IC1'.
    *   Check field clicked on within ALVgrid report
        IF rs_selfield-fieldname = 'EBELN'.
    *     Read data table, using index of row user clicked on
          READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
    *     Set parameter ID for transaction screen field
          SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
    *     Sxecute transaction ME23N, and skip initial data entry screen
          CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
        ENDIF.
        WHEN '&DATA_SAVE'.  "user presses SAVE
        loop at it_ekko into wa_ekko.
          if wa_ekko-sel EQ 'X'.
    *       Process records that have been selected
          endif.
        endloop.
      ENDCASE.
    ENDFORM.
    Thanks,
    Sriram Ponna.

  • Re-issue PO Output

    Hi All,
    I have an output setup (email) in the PO.  When the PO gets created we have conditions setup in MN04/MN05/MN06 to release it automatically.  Does anyone know of a way to re-issue the output in MASS (maybe 20 PO's) after the output has already intially been sent.
    I do know that in my output in configuration, I can setup the PO to release upon changes.  However, we do not want to do this for every PO.  I have also looked at transaction ME9F, but do not see a way to release the email output again.
    Any suggestions would be appreciated.
    Thanks,
    Mark

    Hi There
    If it is only for the selected POs and not to do trigger from ME22n,
    You can do the folllow
    1. Me9f
    2.Processing Status-1
    3.Provide the list of PO doc number
    4.Execute it
    5.Select all and Click on the message details and Select the output types and Click on the repeat output
    6.Save
    7.Back to the main screen and with the Processing Status-0, execute it, all the POs can be output again
    Thanks
    Senthil P

  • Got the Error Message in transaction VL03N when issue the output

    Hi All,
    I got the error Message when i issued the output.
    I selected the output type and error message occurs.
    Error Message"Maintain output NO MATERIAL IS AVAILABLE FOR PRINT ING application completely with VK01.
    Can anybody help me to solve this problem ?
    Regards,
    Luke

    Daer Luke,
    Use T-Code VK01.
    Select usage as B - Output.
    SElect Application as V2 - Shipping & Execute.
    Then select Condition Type & continue. Here select necessary Output Type that you are trying to Print (LD00 in SAP Standard).
    Go in to the Details (by clicking mannifying glass button) screen & Maintain necessary feilds like
    1. Access Sequence (e.g. 0005 - Sales Orgn / Customer),
    2. Put Tick mark in Access to Conditions
    3. Transm. Medium - 1 (Print output)
    4. Partner Functn - SH (Ship to party)
    5. Date/Time - 4 (Send immediately (when saving the application)
    6. PrntParamtr criteria - 5 (Shipping point)
    7. Document type - SDODELNOTE.
    Also check in T-Code NACE whether necessary Printing Problem has been assigned...
    Hope this hleps...
    Thanks,
    Jignesh Mehta

  • When will the "Bookmark this page" selection be returning to the bookmark drop down? No, seriously! We want it back!

    The removal of the "Bookmark this page" selection was a huge mistake. None of the answers really solve the issue. Click the star and then click it again so you can edit the bookmark then move it to the folder you want, or install this add-on to manage your bookmarks. The real fix for this issue is simply to put the selection back. People want simple and when they have something that works well they don't want it to change just because the programmer wanted to do it differently. So when will this functionality be returning?

    * If you click the ★ Star Icon once, the bookmark ends up in the Unsorted Bookmarks folder.
    * If you double-click the ★ Star Icon, you get to pick where to place the bookmark.
    * If you right-click (or Ctrl+click on a Mac) an empty area of the web page and choose Bookmark This Page, the bookmark ends up in the Bookmarks Menu folder and you get to pick where to place it.
    * If you press Ctrl+D (Mac: Command+D), the bookmark ends up in the Bookmarks Menu folder and you get to pick where to place it.
    * You can click and drag the site icon (usually a globe or a padlock) on the left side of the address bar onto either the Bookmarks Toolbar, the Bookmarks Sidebar (Ctrl+B; Mac: Command+B), or the Library (Ctrl+Shift+B; Mac: Command+Shift+B; Linux: Ctrl+Shift+O).
    The following add-on makes bookmarking easier in various ways. Among other things, it's able to remember the last used folder.
    * https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
    I see no reason to believe menu items that were deemed clutter will be reintroduced — especially when there are multiple ways to perform the action in question.

Maybe you are looking for