Page size in smartforms..

Hi..
In my smartform i have the secondary windows and a main window.. In the main window iam using the table layout for the line items display... But when the number of line items are more, the main window is getting displayed in the next page at the same location as it is in the first page instead of just extending to the next page..
Any idea if iam doing anything wrong.. By the way in the general attributes of page1 i had given the next page as Page1 again... so do you think do i need to create page2 to get the table extended to next page when line items are more.. I have few more secondary windows to be displayed immediately after the main window table layout..
So can someone help me out how i can extend my line items to next page in a continuos format...
Also any idea what is the exact size of the Letter Paper in inches for hight and width ?
APPRECIATE YOUR HELP...
THANKS,
Kanthi.

hi kanthi,
i think as u mentioned the problem is with the second page declaration as page 1. so delete it
not only that kanthi even though u will not specify the second page the line items will be populated into the next pape so its bettter that u remove the settiing for the page 2
Regards,
Naveen

Similar Messages

Create coustom page size for Smartforms

Dear All
How to create coustom page size for smartforms.
rgds
pramod

HI
To define a new page format, choose
Administration -> CCMS -> Print->® Spool Administration.
Choose Full Administration and then Page Formats on the Device Types tab page. On the next screen choose Change and Create or Create with Reference. Fill out the fields on the next screen.
Activating a New Page Format
Before using a new page format, you must specify it as a page format in a SAPscript form. Be careful when replacing a page format in a standard SAPscript form as the form may not necessarily fit on the new page format.
You also have to define a format and device type format for the new page format before you can use it.
Thanks and Regards
Santosh Kate

Custom page issue in smartforms

hi all,
As per requirement custom page with 11 inch X 12 inch page size.In windows in default page setting is "letter" so when i am taking print out ,system is considering that letter format and it is not printing all the data as per form developde .
if i maintained in window page setting as A3 size paper then all data is printing but in next page is skipping up 1/4 page and 2nd page is printing from there only.
Requireemnt is system should not consider the windows default setting and it should consider the paeg size what defined in SAP.The users in client orgabnisation are not allowed to change any windows settings.
Kindly guide me how we can solve the issue by doing development in SAP.
Regards
venkat

Hi Venkat,
I don't think there's such option available in smartforms unless you change the frontend (windows) settings.
You must change your printer default settings in windows to match smartform size.
Umakanth R

Change page size in PDF (Acrobat 9)

I have created a PDF file and under document properties it says that the default page size is 11.69 x 8.26 in. I want to change this to A3, but cannot find the option or any help on this.
The PDF was created using the PDF printer from an application that normally only prints to A3. This created a separate PDF file for each sheet of the document, which I then combined using the combine option in Acrobat.
Any thoughts?
Thanks
Alan

I have created a PDF file and under document properties it says that the default page size is 11.69 x 8.26 in.
Where did you see default page size? I can see only page size.

New preview function for iPad–error message "Multiple page sizes not supported"

When I try to use the new preview function with my iPad I get the error message "Multiple page sizes within a layout are not supported". I have a page that is 768 x 1296. I would really like to preview this folio before publishing. Any suggestions?

If you're trying to create an article that scrolls vertically, you can create a 768x1296 article in a 1024x768 folio, but you need to select a Smooth Scrolling option when you create or import the article, or in the Article Properties dialog box.

Does 'Export Relative to Page Size' NOT work in Kindle books & some other ereaders?

Hi I've been looking at this issue that has made the wheels in my head work overtime! I've made a book with pictures for the Kindle store and all the images look too small.
I've used Indesign 5.5 on a Win 7 PC. My file has multiple graphic images and I am exporting it as an epub. When exporting from Indesign you have 2 main options when exporting graphics. You can display them Relative to page size, or have them a Fixed pixel size. In age of multiple size device screens Relative to page size is the logical option because it should be able to make images on a page fill roughly the same percentage of the screen size whatever device you read it on. However I am finding that it doesn't function with all programmes.
I created an epub. Exported it with the Relative to page size option. This works great when viewed on PC with 3rd party software such as Sigil, or in iBooks for iPhone/iPad or Adobe Digital Editions ereader software.
However the same epub the images DO NOT display relative to page size when viewed with Calibre ereader software (images display far too small).
Also, I have converted that same epub (using Calibre) to a mobi. The images in the .mobi DO NOT display relative to page size when viewed with Kindle for PC, Kindle for iPad, Kindle Fire, Kindle Keyboard or Calibre.
Now. I recognise that my test is in no way universal but something is happening that is making the same file display relative to page size with some software/devices and not relative with other software devices. I've been wondering Is this a bug in the Indesign software or is it not possible on Kindle. Has anybody experienced this. And my main objective is to find out if there is a way, using Indesign or changing the css code, to make images display relative to page size on the Kindle?!
Any help, thoughts, ideas, knowledge would be appreciated!

InDesign doesn't have an export to Kindle function. It is not designed to export in the Kindle MOBI format.
There are many things which are lost when converting from EPUB to MOBI files. I'd recommend doing some reading on Elizabeth Castro's blog where she talks about some of these limitations. Also read her book "EPUB Straight to the Point for her section on converting to Kindle.
Formatting ebooks - EPUB Straight to the Point
Another good place to ask is in the Mobile Read forums where many long-term eBook experts reside: http://www.mobileread.com/forums/

"Indesign CS6 Edit Page Size"

Hi why have you changed the way edit page size works in cs6 compared to cs5? in cs5 i could use the reference point to decide where i wanted the page to grow. In cs6 it doesnt matter where i have the reference point it adds the size from center regardless of where i have the reference point.
//Anders

That problem does not exist on my computer
Apple iMac & Creative Cloud
InDesign CS6 V8.0.1

How to create a report with different page sizes

Hi,
I would like to create a report with different page sizes, it's possible to do it with diadem?
When I change the layout parameters, changes afect to all sheets...
Is there a way to change page size individually for each sheet?
Thanks in advance.
Marc

Hi Marc,
You can use the DocStart and DocEnd commands along with the PicPrint command to spool multiple print commands to the same output PDF file using the direct printer approach. This should enable you to programmatically specify the page size differently for each sheet that you add to the print job.
' Print PDF Page by Page.VBS
OPTION EXPLICIT
Dim i, Path, OldPrintName
Path = AutoActPath & "2D Stacked"
Call DataDelAll
Call DataFileLoad(Path & ".TDM")
PDFFileName = Path & " Page by Page.pdf"
IF FileExist(PDFFileName) THEN Call FileDelete(PDFFileName)
OldPrintName = PrintName
PrintName = "winspool,DIAdem PDF Export,LPT1:" ' Set to PDF printer
PDFResolution = "72 DPI" ' "2400 DPI" , "default"
PDFOptimization = TRUE
PDFFontsEmbedded = FALSE
PDFJPGCompressed = "high"
PrintOrient = "landscape" ' orient paper
Call PrintMaxScale("GRAPH") ' auto-max, see alternative margin setting variables below
PrintLeftMarg = 0.181
PrintTopMarg = 0.181
PrintWidth = 10.67
'PrintHeigth = 7 (read-only)
Call WndShow("REPORT")
Call DocStart ' Begin multi-page document/print job
FOR i = 1 TO 4
Call PicLoad(Path & ".TDR")
Call GraphSheetNGet(1)
Call GraphSheetRename(GraphSheetName, "Page " & i)
Call PicUpdate
Call PicPrint("WinPrint") ' Add a page to be printed
NEXT ' i
Call DocEnd ' End multi-page document/print job
PrintName = OldPrintName
Call ExtProgram(PDFFileName)
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How do you can change the page size of a pdf in MAC? I have multiple pdf documents of different sizes that I want to combine.

Help. How do I change the page size of a pdf in MAC? I have multiple pdf documents in varying sizes I would like to combine and print.

There's no real need to do that. A PDF can have pages of different sizes.
On Fri, Jun 6, 2014 at 4:11 AM, christine rambo <[email protected]>

Creating a document with different page sizes.

I'm trying to produce a leaflet with different pages sizes. To try and explain what I mean I have included a picture of what I'd like the front cover to look like. When producing a booklet there doesn't seem to be a provision to individually alter each page size in the pages or document set up panel. Is there anyway around this or do I have to create each page seperately, export to pdf and then combine into the leaflet? Help gratefully received. tomas

The build booklet feature is for very basic booklets, not something like this.
Sorry, but you’ll need to make everything full size and then do the cutting.
Bob

How to reserve the page size when exporting to MS Excel 2010

Hello. I have a report which exports to MS Excel 2010. I applied the page size as legal in Crystal Report and would like to use the same page size in Excel
However, MS Excel print preview says the page size is letter.
How could I keep the same page size in Excel as I applied in Crystal Report. We have a lot of business reports and would like to avoid applying page setting manually in Excel when users print them out each time.
Thank you.

Hi Christine
I am in the process of writing a doc on the different options in CR and the "No Printer" option sis one of those. Seeing this post, made me wonder as this looked like a questionable behavior. My testing does not support your observations. Now, I did a very simple test;
Created a report, set "No Printer", set the paper size and legal orientation. Exported to XLS - any format, and the export maintained legal paper size in all instance. I did a few other variations, but I can never get the report to export anything other than Landscape.
Can you please let me know the version of CR you are using?
You may also want to attach the report here with saved data (to attach rename the rpt to txt, then in the reply hit on the "Use advanced editor" link and attach.
BTW.; I am using CR 2013.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

How not to print all the pages of a smartform? (for tr F150 - Dunning)

Hi Forum
We have the follow situation:
For DUNNING (transaction F150) the user want stamp 3 diferents SMARTFORM.
For the first time the transaction is executed is required only a list of documents, for the second time (via sample printout, indiv dunn notice or dunn history) once the legal data of the customer is updated, the user wants the list of documents, a letter for the lawyers and a letter for the client, in the follows executions (3 and up) the user can require only the list of documents or all smartforms (list and letters)
Via customizing we can control the normal dunning and the legal dunnig, but once the client is in legal status the transaction create only the legal smarforms.
We found an user exit associated EXIT_SAPF150D_001. in the F150 transaction, but is not complete, in sense that are failed some parameters .
Another option is create an unique smartform with 3 pages where we can control the case for the print, but here is where we ask: How we can do to print a specific page of the smartform without print all of them (how can we print the 2nd and 3rd page without print the firs one) ??
To control the 3rd execution, we can create a dictionary table with a flag .
Thank you for your help

You could create a report containing all the single reports in one using UNION. This report could be placed on a "hidden" page. The link for downloading that report you can place on your page. That should work.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
https://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494

Z3200 won't print to custom page size

Hello,
I've created a banner that is 23"w x 82"h (in CorelDraw Suite 4). The page setup of the Corel file is 23" w x 82"h. I've been trying to print it on the z3200 designjet, but have had no luck. I created several custom page sizes (23" x 82", 24" x 85", 24" x 82") using both the "Printer Properties" dialogue within CorelDraw as well as adding a "Form" in the "Print Server Properties", none of them work. I've set the correct paper (24" wide HP Bright White Bond, feeding from the roller) on the actual printer itself, and in the Printer Properties.
I've played around with all of the different settings that I can and sometimes see the following error message:
[1/1]Paper size selected (width:23.00 inches, height: 82.00 inches) is larger than loaded paper (width: 24 inches). Please verify your printer setup.
When the page prints, it is resizing the content to be 8.5" wide.
I don't know what I'm missing. Any advice would be greatly appreciated!
Thank you in advance,
Karen )

I'm having the same problem here in China as well; and I've talked to the tech support in my region and no help. Called the province HP tech rep and he has no clue at all.
Does any Tech/Eng here could help us? Otherwise there's no reason for me to use you guys machine anymore...

Is it possible to Default "Choose page source by PDF page size" option in the "Print" dialog box?

I have an SSRS report that is rendered as a PDF file; the report has many columns and utilizes 11inx17in (Landscape) paper. However, once the report is rendered and users try to print the report they have to manually select the 'Choose Paper source by PDF page size' option in order to get the report to print on the correct paper (otherwise it defaults to standard letter size - landscape orientation).
I'm aware of 'Print Presets' functionality; however, I don't believe they apply to this scenario. Is there a config file/registry setting/anything that can be specified to automatically set the 'Choose paper source by PDF page size' print setting = On/True/Checked?
Any help would be greatly appreciated...

Anybody out there?

Crystal report 9 com+ pdf page size

Post Author: edp
CA Forum: Exporting
I build a dll with vb6 which indoor is present a report (pippo.dsr). The dll was insert in a COM+ application of our server. When i open the COM+ structure and the from an asp page i use the dll will be create a file .pdf perfectely. When i close the COM+ structure the same page asp will create a file .pdf with a strange page size (half of A4 format). Someone know the reason ? Regards

Hi Alias,
Please ensure that the "reset page number after" is unmarked in the section expert on the grouping that this displaying in the report.
Regards,
Zack H.

Page size in smartforms..

Similar Messages

Maybe you are looking for