Page Style works with NYTimes home page but fails with articles.

Page Style works with nytimes.com front page in that the Basic Page Style is displayed but when I select an article the display is that of No Style even though the Basic Page Style is selected.
This is on a Mac computer.

See [http://support.mozilla.com/en-US/kb/How+to+set+the+home+page How to set the homepage]

Similar Messages

When I go to "Tools" / "Plug-Ins" and click on "Check To see If Plugins Are Up To Date" it goes to Mozilla Check Your Plugin Page, but fails to show plugins.

When I go to "Tools" / "Plug-Ins" and click on "Check To see If Plugins Are Up To Date" it goes to Mozilla Check Your Plugin Page, but fails to show plugins or check plugins. I am using OS X 10.10.2 / Firefox 35.0.1 / February-7-2015
Need info and a fix, please... Thanks! Whitebuck
https://www.mozilla.org/en-US/plugincheck/?utm_source=firefox-browser&utm_medium=firefox-browser&utm_campaign=plugincheck-update

"check to see if your plugins are up to date" still doesn't work for me in Firefox 36.0.1

My iPhone got wet.. The phone is working except the home button but Siri is working.. I had also added the assistant touch but in that also the button did not work.. So what should I do???

My iPhone got wet.. The phone is working except the home button but Siri is working.. I had also added the assistant touch but in that also the button did not work.. So what should I do???

The phone is damaged. Take it in to an Apple Store or authorized service provider. More than likely you will have to pay for an out of warranty replacement.

IMessage Beta doesn't work on my home wifi but it does at work, any suggestions why?

iMessage Beta doesn't work on my home wifi but it does at work, any suggestions why?

Hi carre13,
Welcome to the Support Communities!
The article below may be able to help you troubleshoot your Wi-Fi issue.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398?viewlocale=en_US
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
I hope this information helps ....
Have a great day!
- Judy

Java mapping in ccBPM works in PI 7.0 but fails in PI 7.1

Hi guys,
at the moment we are upgrading form SAP PI 7.0 to SAP PI 7.11.
In a scenario for processing of incoming orders we use an ccBPM.
In this ccBPM there is an mapping where the original xml document of the order are combined with some
additional information form an web service (multi mapping 2 => 1)
The result of this mapping is processed further to create an sales order in the backend.
The multi mapping an java mapping is used.
Now we are testing the scenario with PI 7.11 and it fails at this mapping step.
in the workflow log following error occurs.
An exception with the type CX_ST_MATCH_ELEMENT occ urred, but was neither handled locally, nor de
Message no. W8899
I tested the same message on out SAP PI 7.0 system and the whole ccBPM works well.
When I extract the 2 messages from workflow log and paste them into the test tab of the operation mapping of Enterprise Service Builder of SAP PI 7.11, surrounding by the envelope used by multi mappings
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
               XML MESSAGE 1
   </ns0:Message1>
   <ns0:Message2>
               XML MESSAGE 2
   </ns0:Message2>
</ns0:Messages>
the mapping works without error, but at runtime it fails, throwing the error mentioned above.
What could be the reason for this error?
Does the multi mapping change in PI 7.11 at runtime?
Could it be a problem parsing the multi message?
Any help appreciated.
Kind regards
Jochen

Hi Raja,
thanks for your suggest.
I know this issue, the java class files are compiled using jdk 1.5.
We made some more tests.
e.g. created an dummy ccBPM with two mappings, one two spilt the incoming message in two messages (graphical message mapping) and one to merge this two messages to one message again (java mapping)
the mapping works at design time on test tab, but fails with the same error at rumtime.
Also we tested one single operation mapping with this two mappings (split via graphical mapping and merge via java mapping)
This works also at design time but fails at runtime with a similar error shown in smq2
The error message is Error ST_MATCH_FAIL occured. P1=element-start P2=M
we tried to add the whole incoming message to the trace by
getTrace().addWarning()
but an trace object is never created in for this step in the workflow log.
it seem whether you can not add trace messages using the command or that the error occures before this command will be used.
Kind regards
Jochen

DNG conversion 6.6 works on my XP system, but fails to see files on my Vista OS.

DNG conversion 6.6 works on my XP system, but fails to see files on my Vista OS. Same goes for older versions of DNG. I use the same setup of security on both systems.
Can anyone help?

Run an Apple Hardware test. That may provide a clue:
http://support.apple.com/en-us/HT201257
Note that an error free AHT is not definitive.
If you have all of your data backed up or an external clone HDD, I would try erasing the internal HDD, reinstalling the OSX and then upgrading the software to 10.6.8.
Ciao.

Why doesn't Firefox Sync work in my home network, but at work?

Firefox Sync on my laptop does not work when my laptop is connected to my home network, but e.g. if I'm at my office.
The internet connection at my home is fine, I can surf the web with that very Firefox on both IPv4 and IPv6, DNS etc. is also working. Logging in to accounts.firefox.com also works, as does connecting Firefox to the Sync account. Only the process of syncing itself fails. On my desktop computer at home, I have exactly the same problems. When I open https://sync-209-us-west-2.sync.services.mozilla.com/ in a browser tab, I see a confirmation message that sync runs on that server, so apparently the network path between my computer and that server is free.
Upon investigation with Wireshark, I see the successful TLS handshake, then some packets from the client that are not answered and after some time the server closes the connection (Encrypted Alert). Apparently, no content is transferred between client and server. I attach a screenshot of how Wireshark sees the conversation between server and client (The image upload here didn't work so I put it on the web: http://ibin.co/1zXABHKdj5mA).
To exclude a possible misconfiguration or bad add-on, I created a clean new Firefox profile and connected it to my Firefox account, but this shows exactly the same problems.
Fun fact: Firefox on my Android phone does sync in my home network.
Below, I will link two log files, one successful sync (office network) and one failed sync (home network):
Sync @ office: http://pastebin.com/rZmfrbdL
Sync @ home: http://pastebin.com/a3KUCevJ

Any chance you are on a DS-Lite network at home? If so, what's your ISP? The home network symptoms look a little like https://bugzil.la/1118958

MyPlugin works fine in AdobeReader-9 but fails in AdobeReader-X(10).

Hi ,
The plugin which i created using Acrobat SDK works fine in AdobeReader-9 but it doesnt works as expected in AdobeReader-X.
The issues with Reader-X are listed below :
1. MyPlugin doesn't get loaded at the top as the other tollbars , which i was able to load MyPlugin in Reader-9. In Reader-X , MyPlugin gets loaded at the right-side panel under 'Tools' Tab.
2. In Reader-X, there is an option which we can select for 'Enable Protected-Mode'.
a. If this is enabled i am able to see all the buttons of MyPlugin but when i clicked on each button it wont do its task instead i get error message saying unable to create HelperObject. Why MyPlugin's buttons not performing its task when the Protected-Mode is Enabled?
b.If i disable the Protected-Mode , i will see only first two buttons of MyPlugin(MyPlugin contains 4 buttons) and the when i click on those buttons it will be able to do its task as expected. Why i am not able to see all the buttons of MyPlugin during Protected-Mode disabled ?
Please let me know what i should do to make MyPlugin work in Reader-X. MyPlugin is working fine in Reader-9.
Thanks in advance. Please someone help me out from this..

Hi Richard,
Sorry , i could not reply to your previous posts.
In the below link they is a sample for making IE-Plugin work when IE-Protected mode is On.There is explaination on broker process.
http://msdn.microsoft.com/en-us/library/bb250462(v=vs.85).aspx .
This below links may also be useful :
http://msdn.microsoft.com/en-us/library/ms537312(v=vs.85).aspx
http://www.codeproject.com/KB/vista-security/PMSurvivalGuide.aspx
We may have to do the same way for our Reader Plugin, which i have also not implemented it till now,also did not get any sample for Reader Broker process.
I did lot of search but i also didn find any.
So what i am doing is,displaying a message box to user if the Reader Protected mode is enabled. And ask the user to Click on a button to disable Reader Protected mode. After restarting the PDF the user will be able to access MyPlugin without any error.
As of now i am doing this, but i have to make MyPlugin to work even when the Protected Mode is enabled. For this i need to create the Broker Process.
I know you have also spend lotz of your time to find a solution for this. But we are not getting the right ways to achieve a solution for this.
If i get a solution for this i will definately inform you and if you get any solution please let me know.
Thanks and Regards,
Chetan.

Event receiver works perfectly in debug mode, but fails in release mode

Here is my item added event which works perfectly and gives read permission to CCfield user in debug mode, but doesn't give permissions to CCfield user when item added event is triggered in release mode:
base.ItemAdded(properties);
try
SPListItem item = properties.ListItem;
string idnumber = Convert.ToString(properties.ListItem["ID"]);
string itemurl = properties.ListItem.Url;
SPWeb web = properties.Web;
item.BreakRoleInheritance(false, false);
//item.Update();
string ccfield = Convert.ToString(properties.ListItem["EmailCc"]);
string STRFirst = "<" ;
string STRLast = ">";
int Pos1 = ccfield.IndexOf(STRFirst) + STRFirst.Length;
int Pos2 = ccfield.IndexOf(STRLast);
string ccfield1 = ccfield.Substring(Pos1, Pos2 - Pos1);
SPUser user = item.Web.EnsureUser(ccfield1);
SPRoleAssignment roleAssignment = new SPRoleAssignment(user);
roleAssignment.RoleDefinitionBindings.Add(web.RoleDefinitions["Read"]);
item.RoleAssignments.Add(roleAssignment);
catch (Exception e)
throw;
Any help?
sk.Rakhishma

Event receivers run using the permissions of the user who triggered the event. If your user does not have rights to manage permissions then you will need to run your security code with elevated permisisons.
SPSecurity.RunWithElevatedPrivileges(delegate()
{ your code here } )
Note that RunWithElevatedPermissions will not work with Sandbox code.
Mike Smith TechTrainingNotes.blogspot.com
my SP customization book

XQuery works outside of Oracle JDeveloper but fails in JDev

Hi,
I created an XQuery script that transform an XML file. It works fine in XMLSpy and Stylus, but fails with error in Oracle JDev 10.1.3.1:
XPST0008: It is a static error if an expression refers to an element name, attribute name, schema type name, namespace prefix, or variable name that is not defined in the static context, except within an ElementTest or an AttributeTest.
Detail: invalid type 'xs:anyAtomicType'
Does that mean Oracle JDev doesn't fully support XQuery 1.0?
Thanks.

Michelle,
Can you post your code?
Regards,
Geoff

Working windows install on ssd but fails to boot when old hdd is removed

I bought a Samsung 840 ssd for my Thinkpad T510 to use as my primary hdd and an Ultrabay Sata adapter to mount an additional hdd. I clean installed Windows 7 64 bit on the ssd . Previously I was using 32 bit Windows but I because I also upgraded to 8 gb ram I needed to switch to 64 bit. I used the Windows USB DVD tool to create a bootable USB to install Windows from.
Everything went fine. Because I have two hdds both running windows, when I boot the computer it prompts me to pick which Windows 7 to run. Both run fine. However, and this is the problem I need help with, when I remove the original hdd leaving only the Samsung ssd the computer won't boot - it says no valid operating system.
I tried updating the BIOS but that didn't help.
Any ideas?
Thanks!!*
*Update: I used EasyBCD to copy the boot file to the ssd. Now I am able to boot fine on the ssd with the old hdd removed. So it would seem as if not having the boot file on the ssd was the problem. Still, when I boot up, I'm prompted to pick between booting Windows 7 (new ssd) and Windows 7 (old hdd thats no longer connected). Obviously if I pick the latter it fails to boot. If I pick the former it works fine (problem solved!), but I'd like to be able to skip this prompt when I turn on my comp. Any ideas?
Also, I'm curious why the boot file wasn't on the ssd already once I installed windows 7 on that drive. Is it because the old hdd was still physically connected while windows was installing? If re-installing windows on the ssd without any other drives present would likely make all these problems go away I'm inclined to just do that, but does anyone know for a fact why this would be necessary?
Thanks!!

I have had similar issues in the past, but it was nothing to do with the T510. It is solely a windows issue. It is happening because , with both the drives installed the system can "see" the modified boot file. When you take out the ultrabay hard drive the system can no longer see the boot file, hence no valis operating system.
For me to fix it in the past, was a bit of mucking around. First off see if you can download "vistaboot" pro v3.3. With that you should be able to copy the bootfile to the SSD. If you can't do that you'll probably have to use a Windows install disk, booting from the DVD drive, wait till it loads up, select keyboard info, and at the next screen choose "start up repair" .
Sad to say, even that is not a guaranteed fix; it failed for me last Friday and I had to do a fresh install. If you don't have a Windows DVD, google for X17-59465 or GSP1RMCULXFRER_EN_DVD. They are the latest version of Windows 7 x64 Ultimate.You should find valid, and legal, download links at digitalriver, the official microsoft site and they most likely be posted somewhere on the mydigitallife forums.
Have fun !!

ANT Deployment issue. works fine in one environment but fails in other

Hi,
Ant script is working fine in Dev environment but is failing in the other environment. Somehow the BPEL server is not able to pick the latest deployed process , due to this the dependent BPEL processes are failing. If we restart the server , it moves forward and then fails at the point where it couldn’t find reference to the processes deployed after restart. Restarting the server at every failed interval will deploy all the BPEL processes which is not the solution.
example : we have BPEL Processes say A, B, C, D and E. A,B are independent processes C is dependent on A, D is independent and E is dependent on D. So I have Ant script to deploy in A,B,C,D,E order. Now I run the Ant Script: It deploys A,B processes and Fails at C saying it couldn't find the process A.wsdl(But A is deployed). So if i restart now it recognizes A and B are deployed so C is also deployed succesfully it also deploys D as it is Independent but fails at E. If i restart the server E is also deployed.
The Environment is clustered.
Any suggestion to make my Ant script to run at a go will be highly appreciated
Thanks
Krishna

Hi KrishnaBhaskarla,
I have something related to ant script, Can you please provide me the steps for deploying applications using ant script.
Regards
Kumar

Why do layer styles work with track mattes but not stencils?

I'm just wondering what's going on "under the hood."
-- Jeff

In addition, Track Mattes work only on the single layer above the layer with the Track Matte applied not on 20 layers.
I never said something else.
I don't agree that a stencil is a group of layers
They are. Stencils operate on comp buffers, mattes on layer buffers. It's simply tech stuff. Accept it as it is. No point in going insane over such minutia. Layer styles are pretty useless most of the time, anyway, due to how they are applied.
Mylenium

Legacy program works on XP calling QT5, but fails on Vista with message: ..

The software is from 1999.
It was developed with Macromedia's Authorware 5.0.
It installs QuickTime 2.12, but on XP I uninstalled that and installed Quicktime 5 -- and the software is able to use Quicktime to display .MOV files.
However, on Vista the following occurs.
If I install QuickTime 5 or QuickTime 7, the .MOV files can be played individually, but when the program tries to display the opening video it states:
Unable to load external movie driver for Intro1st.mov.
Possibly the driver is missing or there is no enough memory.
There is 1 GB of free memory for Vista.
Is there a way to get this working on Vista, just as on XP?
Thank you.
Raymond.

A : separated list of directories, JAR archives,...which is exactly what that line says.

Calling spclientcontext.executeQueryAsync works on the first call, but fails on the second call

I have a webpart that I'm using to display a tree of folders and files from a SharePoint list. When a folder is clicked, some client side code is used to expand the contents of the folder (the code queries the SharePoint list for any child items of the folder).
The code works the first time the folder is clicked. However, if I then click on a sub folder, the code fails. If I click on the sub folder a second time, the code succeeds. This pattern continues - every second time I call my function, it fails.
E.g.
First Click (clicked on Guides), which succeeds, and expands the Guides folder. Second Click (clicked on "In Progress") (fails)
Third Click (clicked on In Progress) (succeeds)
Any ideas why this might happen?
My code looks like this:
var _dweb;
var _dlist;
var _dwebId;
var _dlistId;
var _dfolderUrl;
var _dchildContainerId;
var _dactionContainerId;
var _dlistItems;
var _rtdocsJsInQuery = 0;
function expandorcolapsefolder(webId, listId, folderUrl, parentElementId, childContainerId, actionContainerId) {
var parentElement = $(("#" + parentElementId));
var childElement = $(("#" + childContainerId));
if (parentElement.attr("expanded") == "0") {
parentElement.attr("expanded", "1");
childElement.css("display", "block");
} else {
parentElement.attr("expanded", "0");
childElement.css("display", "none");
return;
if (childElement.attr("dataretrieved") == "0") {
GetData(webId, listId, folderUrl, childContainerId, actionContainerId);
function GetData(webId, listId, folderUrl, resultsElementId, actionContainerId) {
if(_rtdocsJsInQuery==1)
alert('Please wait for the previous action to finish, before trying again.');
_rtdocsJsInQuery = 1;
_dchildContainerId = resultsElementId;
_dactionContainerId = actionContainerId;
_dwebId = webId;
_dlistId = listId;
ShowActionContainer(actionContainerId);
try {
var context = new SP.ClientContext.get_current();
_dweb = context.get_web();
_dlist = _dweb.get_lists().getById(listId);
var query = new SP.CamlQuery();
query.set_viewXml('<View><OrderBy><FieldRef Name="Title"/><FieldRef Name="FileLeafRef"/></OrderBy></View>');
query.set_folderServerRelativeUrl(folderUrl);
_dlistItems = _dlist.getItems(query);
context.load(_dweb);
context.load(_dlist);
context.load(_dlistItems, 'Include(ID,Title,DocIcon,_dlc_DocIdUrl,DisplayName,FileSystemObjectType,FileLeafRef,ServerUrl)');
context.executeQueryAsync(QuerySuccessful,QueryFailed);
} catch (e) {
alert("Failed to execute query... " + e);
HideActionContainer(actionContainerId);
function QuerySuccessful(sender, args) {
try {
// Code omitted.
} catch (error) {
alert("Failed to process query results... " + error);
_rtdocsJsInQuery = 0;
window.setTimeout(HideActionContainer(_dactionContainerId), 500);
function QueryFailed(sender, args) {
alert('Failed to get list items. \nError: ' + args.get_message() + '\nStackTrace: ' + args.get_stackTrace());
_rtdocsJsInQuery = 0;
HideActionContainer(_dactionContainerId);
Regards, Matthew
MCPD | MCITP
My Blog
View
Matthew Yarlett's profile
See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
Upload and Crop User Profile Photos

I fixed this problem by initialising the clientcontext object with a URL (rather than using the get_current property). This suits my needs, as the web that the page the webpart is on, won't always be in the same web as the list.
I'm still unsure why "var context = SP.ClientContext.get_current();" fails every second time?!
Here's the snippet of code I changed, for others reference (namely "var ctx = new SP.ClientContext('/weburl');"):
function GetData(webId, listId, folderUrl, resultsElementId, actionContainerId) {
if(_rtdocsJsInQuery==1)
alert('Please wait for the previous action to finish, before trying again.');
return;
_rtdocsJsInQuery = 1;
_dchildContainerId = resultsElementId;
_dactionContainerId = actionContainerId;
_dwebId = webId;
_dlistId = listId;
ShowActionContainer(actionContainerId);
try {
var ctx = new SP.ClientContext('/eog');
_dweb = ctx.get_web();
_dlist = _dweb.get_lists().getById(listId);
var query = new SP.CamlQuery();
query.set_viewXml('<View><OrderBy><FieldRef Name="Title"/><FieldRef Name="FileLeafRef"/></OrderBy></View>');
query.set_folderServerRelativeUrl(folderUrl);
_dlistItems = _dlist.getItems(query);
ctx.load(_dweb);
ctx.load(_dlist);
ctx.load(_dlistItems, 'Include(ID,Title,DocIcon,_dlc_DocIdUrl,DisplayName,FileSystemObjectType,FileLeafRef,ServerUrl)');
ctx.executeQueryAsync(QuerySuccessful,QueryFailed);
return true;
} catch (e) {
alert("Failed to execute query... " + e);
HideActionContainer(actionContainerId);
return false;
Regards, Matthew
MCPD | MCITP
My Blog
View
Matthew Yarlett's profile
See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
Upload and Crop User Profile Photos

Page Style works with NYTimes home page but fails with articles.

Similar Messages

Maybe you are looking for