Page template not loading into BC

HI there
I have created a new template by creating a page (not from masters) and have added {tag_pagecontent} by adding HTML, and uploaded it to BC. The template is not ppearing in templates.
Can anyone please help me? Has something changed with last update?
Thanks so much
Bec.

ok so I have create a page in my muse file and called it template_recipes
Last time i did this I was told not to use a master page. So i created this page from scratch using no master, and embedded the html code tag {tag_pagecontent]
Published it to BC and no template was found in "Page Templates" in BC
So then i did the same steps but created the page with a Master and published it to BC.... Still no template in "page templates"
Nothing is working and I am tearing my hair out... can anyone lhelp me please????

Similar Messages

Sample Templates Not Loading Correctly

In Dreamweaver CS3, my sample template pages are not loading
with the CSS or image links. If I go into the folder where the
samples are kept, it will load the CSS and images. But in
Dreamweaver, I seemed to have changed something that I can't figure
out what it was and how to fix it.
Is there a way to redirect your site images and CSS to a new
folder or do you have to do each one individually?

If you drag your files to new folders WITHIN DW;s file list,
you should get
a message asking if you want DW to update links. When you
click YES, DW will
correct all affected links for you.
"speedr69" <[email protected]> wrote in
message
news:f9m1io$61$[email protected]..
> In Dreamweaver CS3, my sample template pages are not
loading with the CSS
> or
> image links. If I go into the folder where the samples
are kept, it will
> load
> the CSS and images. But in Dreamweaver, I seemed to have
changed something
> that
> I can't figure out what it was and how to fix it.
>
> Is there a way to redirect your site images and CSS to a
new folder or do
> you
> have to do each one individually?
>

Workspace page in not loading in EPM 11.1.1.3 on windows 2003 server

Workspace page is not loading , means i'm not able to see the admin, password and log on tab on page
i'm able to open planning through url , EAS console and shared services consol working fine
i'm installed EPM 11.1.1.3 on Windows server and configured it successfully.
i checked the log files for workspace here i give the details of log file below
08 Aug 2012 22:46:39,249 ALWAYS [main] tools.config.RegistryConfig - RegistryConfig: starts logging at 1344491199249 (Wed Aug 08 22:46:39 PDT 2012)
08 Aug 2012 22:46:39,249 ALWAYS [main] tools.config.RegistryConfig - Parsing products file: /conf/WSProducts.xml
08 Aug 2012 22:46:39,671 ALWAYS [main] tools.config.RegistryConfig - Products file parsed without errors.
08 Aug 2012 22:46:39,686 ALWAYS [main] tools.config.RegistryConfig - Attempting registry connection using hyperion.home=C:\Hyperion
08 Aug 2012 22:46:39,686 ALWAYS [main] tools.config.RegistryConfig - Got Registry handle: com.hyperion.hit.registry.Registry@369fdc
08 Aug 2012 22:46:39,686 ALWAYS [main] tools.config.RegistryConfig - Looking for the Workspace Product node (type: WORKSPACE)
08 Aug 2012 22:46:39,686 ALWAYS [main] tools.config.RegistryConfig - Found node: com.hyperion.hit.registry.ProductComponentImpl@e5c5b90f
08 Aug 2012 22:46:39,686 ALWAYS [main] tools.config.RegistryConfig - Looking for Workspace Logical Webapp (child of Workspace Product, type: LOGICAL_WEB_APP)
08 Aug 2012 22:46:42,030 ALWAYS [main] tools.config.RegistryConfig - Found node: com.hyperion.hit.registry.LogicalWebAppComponentImpl@e5c4f0f4
08 Aug 2012 22:46:42,030 ALWAYS [main] tools.config.RegistryConfig - Looking for Workspace Web Server (child of Workspace product, type: WEB_SERVER)
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - Found 8 webapps integrated into Workspace.
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - Found webapp: Default
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - WebAppType: FINANCIAL_REPORTING_WEB_APP
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - Product file configuration matches version 9.5.0.0
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - NOTE: Product version for display is 11.1.1.3.0.0238
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - Found webapp: Default
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - WebAppType: WORKSPACE_WEBAPP
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - Skipping integration for this product.
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - Found webapp: Default
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - WebAppType: PLANNING_WEBAPP
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - Product file configuration is for version(s): 9.2,9.3 but registered product version is 9.5.0.0
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - Discarding old configuration.
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - Setting product to use external configuration.
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - NOTE: Product version for display is 11.1.1.3
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - Found webapp: Default
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - WebAppType: ADMIN_SERVICES_WEB_APP
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - Skipping integration for this product.
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - Found webapp: Default
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - WebAppType: CALC_WEBAPP
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - Product not in static configuration file, initializing.
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - NOTE: Product version for display is 11.1.1.3
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - Found webapp: Default
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - WebAppType: EPMA_WEB_APP
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - Product file configuration is for version(s): 9.3 but registered product version is 9.5.0.0
08 Aug 2012 22:46:42,093 ALWAYS [main] tools.config.RegistryConfig - Discarding old configuration.
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - Setting product to use external configuration.
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - NOTE: Product version for display is 11.1.1.3.00.711
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - Found webapp: Default
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - WebAppType: PROVIDER_SERVICES_WEB_APP
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - Skipping integration for this product.
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - Found webapp: Default
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - WebAppType: SHARED_SERVICES_WEBAPP
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - Skipping integration for this product.
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - Product HPS-9.3 was not registered. Deactivating.
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - Product Analyzer-9.5 was not registered. Deactivating.
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - Product biee-9.5 was not registered. Deactivating.
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - Product HFM-9.2,9.3 was not registered. Deactivating.
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - Product HMB-9.2,9.3 was not registered. Deactivating.
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - Loading configurations from Shared Services as needed.
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - Missing product context CALC
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - Checking HSS for context under product code CALC-9.5.0
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - Attempting Workspace Services connection for HSS.
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - GSM count: 1
08 Aug 2012 22:46:42,108 ALWAYS [main] tools.config.RegistryConfig - Client factory instance: com.brio.one.client.ClientFactory@1b45ddc
08 Aug 2012 22:46:42,796 ALWAYS [main] tools.config.RegistryConfig - Recovered 1502 bytes from HSS.
08 Aug 2012 22:46:42,796 ALWAYS [main] tools.config.RegistryConfig - Product file parsed without errors.
08 Aug 2012 22:46:42,796 ALWAYS [main] tools.config.RegistryConfig - Found and loaded context for CALC
08 Aug 2012 22:46:42,796 ALWAYS [main] tools.config.RegistryConfig - Missing product context HP
08 Aug 2012 22:46:42,796 ALWAYS [main] tools.config.RegistryConfig - Checking HSS for context under product code HP-9.5.0
08 Aug 2012 22:46:43,561 ALWAYS [main] tools.config.RegistryConfig - Recovered 37129 bytes from HSS.
08 Aug 2012 22:46:43,561 ALWAYS [main] tools.config.RegistryConfig - Product file parsed without errors.
08 Aug 2012 22:46:43,561 ALWAYS [main] tools.config.RegistryConfig - Found and loaded context for HP
08 Aug 2012 22:46:43,561 ALWAYS [main] tools.config.RegistryConfig - Missing product context BPMA
08 Aug 2012 22:46:43,561 ALWAYS [main] tools.config.RegistryConfig - Checking HSS for context under product code BPMA-9.5.0
08 Aug 2012 22:46:44,014 ALWAYS [main] tools.config.RegistryConfig - Recovered 46940 bytes from HSS.
08 Aug 2012 22:46:44,046 ALWAYS [main] tools.config.RegistryConfig - Product file parsed without errors.
08 Aug 2012 22:46:44,046 ALWAYS [main] tools.config.RegistryConfig - Found and loaded context for BPMA
08 Aug 2012 22:46:44,046 ALWAYS [main] tools.config.RegistryConfig - Finished loading needed Shared Services configurations.
waiting for reply,
thanks,
vishal.

Hi,
Check if your web server/ Apache service is running ?
Regards.

I just downloaded Pages and it loaded into iTunes and I cannot get it to open

I just downloaded Pages and it loaded into iTunes and I cannot get it to open...help!

If you're downloading Pages from the iTunes App Store you're not getting the Mac version, just the iOS version for iPhone, iPad & iPod Touch. They are two separate applications for two different operating systems. To get Pages for your Mac you need to go to the Mac App Store. Either click the icon in the Dock or click on the Apple icon at the top left of your screen & choose App Store.

Application Server Control Panel page will not load

I am new to Oracle Application Server and need some assistance to determine why the Application Server Control Page will not load after entering the username/password for ias_admin. I have just installed Oracle Application Server 10g (10.1.2) on Redhat Linux.
The Listener and the Repository Database are up. I have successfully started the processes for the OracleAS Infrastructure instance with:
$ORACLE_HOME/opmn/bin/opmnctl startall
I have successfully started the OracleAS Console with:
$ORACLE_HOME/bin/emctl start iasconsole
I ran "emctl status iasconsole" and received:
http://localhost.localdomain:1810/emd/console/aboutApplication
Oracle Enterprise Manager 10g Application Server Control is running
Logs are generated in Directory ...../sysman/log
I ran "opmnctl status" and received:
Process in Instance: oraappserv1.localhost.localdomain
ias component process type pid status
LogLoader logloader N/A Down
DSA DSA N/A Down
dcm-daemon dcm-daemon 0 None
HTTP_Server HTTP_Server 6180 Alive
OC4J OC4J_SECURITY N/A Down
OID OID 6199 Alive
I can bring up the "Welcome to Oracle Application Server 10g Release 2 (10.1.2)" web page successfully with "http//<host>:7777".
My problem arises after I click on the link for " log on to Oracle Enterprise Manager 10g Application Server Control". I enter the username/pwd for ias_admin and then progress bar on the status bar of the browser goes so far and stops. The Application Server Page will not render.
Can someone point me into the direction of what to check, whether its an enviromental setting for linux or a configuration issue with the Application Server?
note: that the status bar for the browser shows "shortcut to localhost.local domain" when highlighting the link " log on to Oracle Enterprise Manager 10g Application Server Control". This is different than <host> specified in the URL to render the welcome page. I would't think this to be an issue because the login screen came up and it also appears in the results of the emctl status iasconsole and opmnctl status commands.
Thanks in advance for your assistance.

Emilio, note implies emagent core dumps. If that is the case emctl would (hopefully) not return status "ok".
Here is my output with sysman oc4j running but emagent gone (AS 9.0.4):
$ emctl status iasconsole
Oracle Enterprise Manager 10g Application Server Control 9.0.4.1.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
EM Daemon is not running.
Also, if you login to AS Control does it redirect browser to http://localhost.localdomain/... ?

4.01 automatic update today 4.29.11, now pages will NOT load at all, just hangs there saying connecting. Tried system restore, re-installing, only way to get it to work is to boot in safe mode. Running W7, 64bit, I5, 2.53 ghz, 4GB, ati radeon 5470

I've been using firefox 4.01 Today (4.29.11) it downloaded an update and now the pages will not load. I tried disabling the add ons, system restore, un-installed/re-installed but the page hangs there and just says connecting. I booted in safe mode with networking and it worked. Running W7, 64Bit, I5, 2.53GHZ, 4GB, ATI mobility radeon 5470

I've been using firefox 4.01 Today (4.29.11) it downloaded an update and now the pages will not load. I tried disabling the add ons, system restore, un-installed/re-installed but the page hangs there and just says connecting. I booted in safe mode with networking and it worked. Running W7, 64Bit, I5, 2.53GHZ, 4GB, ATI mobility radeon 5470

Since v.6.0.2, was installed [I have Win XP] my eBay pages do NOT load properly ... the images cannot be enlarged and I cannot save things to My eBay. Still works OK with IExplorer .... I do not have a clue on the geeky stuff

Since v.6.0.2, was installed [I have Win XP] my eBay pages do NOT load properly ... the images cannot be enlarged and I cannot save things to My eBay. Still works OK with IExplorer .... I do not have a clue on the geeky stuff .... WILL THIS FIREFOX ERROR SOON BE FIXED ?
Don't know what more to ask. I looked at the known problems and couldn't make any sense of the answers

Upgrade your browser to Firefox 8 and check
* getfirefox.com

CR files will no longer show in bridge and will not load into PS

Hi I had a problem with bridge CS6 dynamic link failing and had tech support finally help with the problem by phone They had me reinstall PSCS6 and Bridge among other things like setting the permissions differenty. It worked ok when I opened it again after those changes and then I closed the apps and opened them again the next day (today) but now the CR files will show no thumbnails nor previews in bridge and will not load into PSCS6.
I get now the following error messages
These are files that are on my system and not from a camera plugged into the computer. They had worked just fine before the reinstall and permisisons changes the tech had me do. They open in the preview app and look fine so I know they are not corrupted files and I have tried different saved versions of the same (or any other CR file) and none of them will now open and Camera raw itself seems no where to be found. My prefences in camera raw have not clanged. Any ideas??? thanks and aloha, UP
I tried image processor in bridge to make them PS files and got the following error message.
I tried to load one of the CR files from the finder dirretly and got the following error message.
Any help would be appreciated. If the post goes inanswered I will call tech support again. aloha UP

HI, I managed to fix the trouble by reinsatalling once again and running updates BEFORE opening bridge. It seemed that if I ran the update AFTER opening bridge I would get either an up to date status when checking for updates or I would get an install failure notice on all 4 updates that were trying to install. The updates were for camera raw, bridge and PS. I can't explain why but that helped a little. I also changed permissions on my whole user accnt to include read/write for all users. I can't say if this helped or not. I also had to go into my camera B/U files on a sepate HD and replace some of the CR folders I was using o nthe desktop. Still the CR files would not show a thumb nor a preview till I then went to each individual file inside that folder and purged the cashe for that file so it could repopulate the cashe yet again. This has been the strangest few days in PSCS6 history! Well my personal history. I will report back here if more quirks emerge. I would prefer quarks though....aloha, U

Since the update loaded on my computer my web pages will not load and i get invalid url message

Ever since firefox updated to 17, my web pages will not load. When I type in the search bar and hit the enter button, the address switches to https and i get a message stating that my page is an invalid url and the following message
Reference #9.1db78443.1354339468.3c70717c
I have cleared my histories and cookies and restarted my computer but cant get it to work.
I can type in www.google and go directly to the google page and then gain access to my pages, just not through the firefox address bar.

'''Try the Firefox SafeMode''' to see how it works there. 
''A troubleshooting mode, which disables most Add-ons.'' 
[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
When in Safe Mode... 
* The status of plug-ins is not affected.
* Custom preferences are not affected.
* All extensions are disabled.
* The default theme is used, without a persona.
* userChrome.css and userContent.css are ignored.
* The default toolbar layout is used.
* The JIT Javascript compiler is disabled.
* Hardware acceleration is disabled.
* You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

CDC Error (JOURNALIZED DATA is not loading into tartet database)

HI,
I have enabled source database for CDC and got green mark on source database model tables.
while inserting data into source, J$ tables updating JRN_SUBSCRIBER and other filed.
when I run the package/ interface JOURNALIZED DATA is not loading into target database.
i have implemented cdc for 7 source table.
and using JKM MSSQL Simple
and enable JOURNALIZED DATA in interface level.
and
source database is : MSSQL Server
Target Database : Oralce 11g.
please advice me.
thanks in advance.
Zakeer Hussain

Zakeer look into this link , -http://odiexperts.com/?p=1096 . Hope this helps.
also before running Can you right click on the Source Datastore and click on Journal Data and can you see the data ? and if still the data is not passing through ,in that case make temporary objects t- yes in LKM , IKM and debug and see at which step data is not flowing through and look if there is any filter or condition which is stopping it .
Still not able to figure out please tell us which step the data is not flowing through we will try to guide you.

I wanted to send a push notification, unfortunately it does not work. The page will not load. Anyone know why?

I wanted to send a push notification, unfortunately it does not work. The page will not load. Anyone know why?

Push notifications, I believe, is only for iOS.
If it is for iOS, take a look at Using Apple push notifications with Digital Publishing Suite | Adobe Developer Connection

Some web pages are not loading on my Macbook pro, Safari,firefox,chrome,opera! Some web pages are loading pictures like thumbnails. Pls i need helpppppppppp!

Some web pages are not loading on my Macbook pro, Safari,firefox,chrome,opera! Some web pages are loading pictures like thumbnails. Pls i need helpppppppppp!

It would help us help you if you provided a link to a non working page.

Why won't Canon Raw images in IPad air photoroll NOT load into LightRoom Mobile ?

Why won't Canon Raw images in IPad air photoroll NOT load into LightRoom Mobile ?
I can import Canon Raw images from my s120 into the iPad Air's photo roll but then the import from photoroll into LightRoom Mobile collections fails.
Any ideas on how to get this working ?
Thanks,

Raw import is not yet supported by Lr Mobile. You can vote for this feature request Lightroom mobile: Ability to import raw files

On Firefox, I select one of my usual sites on the URL dropdown menu but the page does not load. Please help!

I click on the Firefox icon on the bottom of my toolbar screen. I go to the URL dropdown menu for my usual sites; I select one but the page will not load and the URL field is blank. It is a hassle to press the up and down arrows to select the site. Please help!

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I have a slideshow I made in iPhoto and it is showing in iTunes movies but when I select it and click 'sync' it does not load into my phone. I have made sure it is a mobile version of the slideshow

I have a slideshow I made in iPhoto and it is showing in iTunes movies but when I select it and click 'sync' it does not load into my phone. I have made sure it is a mobile version of the slideshow. How do I load it onto my phone? Or also, how do I play it from iPhoto or iTunes through Apple TV

Was the iPod setup via iTunes on this computer?
Setup via wifi?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method

Page template not loading into BC

Similar Messages

Maybe you are looking for