Page Viewer to have links open a different page

I have a custom HTML page i have created that has links to site pages. I have a page viewer web part on my home page that points to this custom HTML page. I want it so when you click on a link on this html page, it doesn't just take you to the page
within the page viewer, but have the whole page navigate there.
I do not want the link to open a new tab or new window, just navigate from the home page to the page.
Any ideas?
I had it in a content editor before and it worked fine, but for some reason it changed all the hyperlink text to red, even though there is not one line in my css file to have any red text anywhere. Strange.
Thanks.

Hi,
According to your description, my understanding is that you want to redirect a new page directly outside the page view without tag or new window.
It could be achieved setting target attribute to _parent for <a> tag.
<a target="_parent" href="/sites/zhengyuGuo/">Click here to continue</a>
The link above will allow us open the link in the parent page.
More information:
Redirect the parent page from IFrame:
http://stackoverflow.com/questions/2092275/redirect-the-parent-page-from-iframe
Best regards,
Zhengyu Guo
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support

Similar Messages

Can I have links open in a new browser window?

Is it possible to have links to pages outside of my website to open in a new browser window?
I've created a podcast for my students to listen to.
I've also created a kind of fill-in-the-blank activity to go along with that podcast, but that activity requires a different window.
I want my students to listen to the podcast and do the fill-in at the same time.
So, I'd like for the students to open the link to the fill-in and then click on the podcast on the original page.
Advice?

changing podcast links is a bit difficult - but here is a general link of how to open windows in a new window:
http://www.rowan-cottage.co.uk/Site/Target_Blank.html
max

I run windows 7 and have two monitors. I can't find a way to have Firefox open two different websites - one on each monitor. How can I do this?

I like to have Ancestry.ca open on one monitor and cut and paste from an online data base off the other monitor. I can't figure out how to do this.
Many thanks
Sheila

Have you tried to make a new Window ( in "File" menu) and then drag the new window to the other screen?
It's a very simple solution. Unless there is another problem you haven't mentioned.

Social media links opening in the same muse window. I'm trying to find a way to get them to open in new tabs. Anyone know how to fix this problem?

I know that the settings for Muse are supposed to have links open in new windows but that is not happening. I've unlinked and linked them again several times. Actually all of the outside links open in the same Muse window. Help please!! I'm ready to connect the domain but can't bring myself to doing that until I get this fixed.
Thanks
Here's the link - PET PRODUCTS

Please send me the file at [email protected] with my name in subject line along with this forum link.
I will have a look.
Thanks,
Sanjit

How to change a text item to have a link that opens a different page?

Hi,
How to change a text item to have a link that opens a different page?
Thanks,
Guy

Hi Denes,
I understood what the code will do. But it did not work.
...a href="f?p=&APP_ID.:2:&SESSION.">LINK</a...
By default, P5_TASK_NAME displays Task Name which is passed from Page 3.
So I changed your code as follows so that P5_TASK_NAME value may be displayed with a link.
...a href="f?p=&APP_ID.:3:&SESSION.">:P5_TASK_NAME</a...
But P5_TASK_NAME value appears without any link and does not open page 3.
Then I created a new text item (display only) in the same HTML region in page 5 and entered the following code in the default box:
...a href="f?p=&APP_ID.:3:&SESSION.">LINK</a...
When I ran the application, it displayed the whole code as text.
How can I display P5_TASK_NAME value with a link to open page 3?
Would appreciate your help.
... to be replaced with < or >
Could you please let me know how to display link code correctly?
Thanks,
Guy
Edited by: GUY3 on Mar 11, 2009 4:20 PM

Can only open one link at a time; any page in new tab will seem to load but appears blank. I have to open a new browser to go to a new page. Why?

This just began to happen yesterday. I have a MacBook Pro 10.7.5.
I can always get to the first page that I open in a new browser, but any page after that that I try to open in a new tab will seem to load but the page is blank.
This does not just happen with one website I have tried myriad of different sites.. only the first tab loads in a new browser. I am having to open a new browser if i want to go to another link - very frustrating..

Hi - This is Eddie from NTK.
We just released an updated version handling the new Firefox Beta - please grab it from https://addons.mozilla.org/en-us/firefox/addon/new-tab-king/versions/
Apologies for the bad experience. We're working hard to chase the never-ending Mozilla release train...
--eddie

Issue in FF v 3.6.10: I have a page which have more than 20 link, clicking on these link opens up a popup using window.showModalDialog, for the first 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open.

Issue in FF v 3.6.10: I have a web page which have more than 20 link, clicking on each of these link opens up a pop-up using window.showModalDialog, for the first consecutive 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open. This is m problem, the real user on the web page can click on more than 20 link in such a scenario it may create problem, please help

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

When I select a "compose email" from my GoDaddy email page, it opens up another whole Foxfire window. I can't seem to have it open into another tab instead.

When I select a "compose email" from my GoDaddy email web page, it opens up another whole new Foxfire window. I can't seem to have it open into the existing Foxfire window but just another tab instead.

Firefox diverts most new windows to tabs, but there is an exception when a website uses a script to specify the window's dimensions or removes some toolbars. To remove the exception, you can make a change under the covers. This could be awkward for genuine dialog windows that don't make sense to view in a separate tab, but if you find it more annoying than useful, you can easily switch back.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(3) Confirm that the '''browser.link.open_newwindow''' preference is set to its default value of 3 (divert new windows to a tab instead), or right-click > Reset to get that value
(4) Double-click the '''browser.link.open_newwindow.restriction''' preference and change the value from 2 to 0 (that's a zero) and click OK
Any luck?
For future reference, the possible values for the window/tab preferences are:
(A) browser.link.open_newwindow
3 = divert new window to a new tab (default) (checked*)
2 = allow link to open a new window (unchecked*)
1 = force new window into same tab
* First checkbox in Options > Tabs
(B) browser.link.open_newwindow.restriction - for links in Firefox tabs
0 = apply the setting under (A) to ALL new windows (even script windows)
2 = apply the setting under (A) to normal windows, but NOT to script windows with features (default)
1 = override the setting under (A) and always use new windows
(C) browser.link.open_newwindow.override.external - for links in other programs
-1 = apply the setting under (A) to external links (default)
3 = open external links in a new tab in the last active window
2 = open external links in a new window
1 = open external links in the last active tab replacing the current page

Need links to open in different window

Please forgive my outrageous ignorance with respect to
webpage design/development and especially Dreamweaver CS3. I
created a very basic website in Microsoft Office Publisher 2003 and
I have it up and running (www.ftembroidery.com). It is my very
first attempt at making a website.
The purpose of this page is not so much to make sales over
the internet, although some of our repeat customers do contact us
and order via the internet. The purpose of our page is to be able
to talk with our customers on the telelphone and guide them to
various products in the catalogs we have linked. Basically we're
handing them a stack of "electronic" catalogs from a handfull of
our suppliers so they can decide what to purchase.
I would like these "catalogs" (links) to return to OUR
website if the viewer closes the page. Currently, they do not. If
you close the window of one of the catalogs, you shut down
everything. I believe that means the catalog links need to open in
a new window. If I am correct in that belief, how do I
change/correct my webpage to do that?
Once I have done that, I will have time to learn more about
webpage design/development and how to use the Dreamweaver CS3 that
I just purchased.
Thanks in advance for your help, remembering please to be
very clear and specific because of my lack of knowledge and
experience.
Nick

Check out this site - WWW.ITKONG.COM.
Focused solely on the community of IT specialists, web
developers, technological experts, companies and individuals alike.
Currently we are up and running in our beta phase, taking
care of final minor bugs tightening loose screws and slowly getting
the word out about our existence.
I hope it is of some help and we welcome your feedback.
Team ITkong

How can i close the preview in Adobe Viewer when the LINK ist fullscreen on my eMag? It will always go to URL and i can't open the summary.

How can i close the preview in Adobe Viewer when the LINK ist fullscreen on my eMag? It will always go to URL and i can't open the summary.

You have to change your page design so the link doesn't occupy the full screen of your content.
Neil

One more reason to put my iMAC at the curb. I can open and view Picasa photo links when I sign in via Google, but if I'm in Mail and click on the Picasa image link (my own or one someone esle sends me I can't view the images. Thye are all blank white squa

One more reason to put my iMAC at the curb. I can open and view Picasa photo links when I sign in via Google, but if I'm in Mail and click on the Picasa image link (my own or one someone else sends me) I can't view the images. They are all blank white squares. This started a few weeks ago. Why can't I view Picasa link images through Mail?

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

How can I click on a bookmark and have it open a new page? When I click a bookmark it always opens right in the sidebar, all my bookmarks disappear and I am left with two seperate pages?

I keep my bookmarks open at all times in the sidebar. If I want to go to a site, say Google, I must do a right click on the bookmark and then click on "Open In A New Tab" then the google page opens in a new tab.
I want to skip the second click. I want to be able to simply left click the google booknark in the sidebar and have google open in a new tab.
the way things are now, when I simply do a left click on the google bookmark the new google tab opens in tne sidebar itself. My bookmarks disappear from the sidebar and the google page is opened in the sidebar. So at this point I have two active page open at the same time.
Is there a way to simply left click the bookmark in the sidebar and have the bookmark open as a regular page?
Please pardon my clumsiness as I have only today used FireFox for the first time.

Opening in the Sidebar is the default action for bookmarks that are created via a "Bookmark this Page" link or button on a website. Make sure you use the many "Bookmark this Page" methods that are in Firefox instead.
Right-click that bookmark and select '''Properties''', then un-check the preference for '''Load this bookmark in the sidebar''', and then click Save.

Setup for Discoverer to have multiple sessions opening in different browser

What is the setup for Discoverer or Windows 6 browser to have multiple discoverer sessions opening in different browser windows at the same time in Discoverer 10g Plus?
We have implemented Discoverer 10g Plus just to be used as an extract tool. We have some workbooks retrieving 200,000 or more rows from an Oracle database. It is taking 30 to 45 minutes to download. Some users are able to open multiple sessions in different browsers to download more then one worksheet at the time, but we have other users who get an error message that they can only open one session at the time. What is the setup to allow users to open more than one Discoverer session?

Additional research in Metalink found the following:
Hdr: 7261918 10.2 USER_JAV 10.1.2.54.25 PRODID-964 PORTID-46
Abstract: ALLOW ABILITY TO LAUNCH TWO DISCOPLUS SESSIONS FROM SAME BROWSER CONNECTION PAGE
*** 07/17/08 07:31 am REQUEST TEXT ***
Please refer to bug 6656139. Need to get Discoverer Plus certified to
support launching two plus sessions from same browser connections page when
using SUN JRE 1.5/1.6 or higher.
As per bug 6656139 it appears to be JVM 1.5.x limitation, because same
actions work fine when using SUN JRE 1.4.2_xx.
*** 07/17/08 07:31 am BUSINESS NEED ***
Impossible to run reports against two different databases simultaniously
using same Discoverer instace, or just several reports at the same time,
which would save much time instead of running reports one by one.
*** 07/19/09 11:57 pm *** (CHG: Sta->97)
*** 07/19/09 11:57 pm RESPONSE ***
ALSO SEE THIS FROM SUPPORT
Error 'Unable To Connect Discoverer Server: Null' When Opening A Second Plus Session From The Same Browser [ID 790187.1]
Cause
Bug 6656139, JVM 1.5 : RUNNING TWO PLUS SESSIONS ERRORS WITH UNABLE TO CONNECT: NULL
The Java Console reports the following error:
Error: java.lang.StackOverflowError
java.lang.StackOverflowError
at java.awt.DefaultFocusTraversalPolicy.accept(Unknown Source)
at java.awt.ContainerOrderFocusTraversalPolicy.getFirstComponent(Unknown Source)
at java.awt.ContainerOrderFocusTraversalPolicy.getFirstComponent(Unknown Source)
at javax.swing.DefaultFocusManager.getFirstComponent(Unknown Source)
Per Bug 6656139 this problem is a limitation/bug with current Sun JRE 1.5
and higher and needs to be addressed by Sun.
Solution
Currently launching two Discoverer Plus sessions from the same browser connection page is not supported/certified.
Enhancement Request :
Bug 7261918, ALLOW ABILITY TO LAUNCH TWO DISCOPLUS SESSIONS FROM SAME BROWSER CONNECTION PAGE
has been logged for this issue but is still waiting on a Sun Java fix.
Use the following workaround:
Use JRE 1.4.2_xx until the ER is implemented and the SUN JRE bug is fixed.

"View in iTunes Store" opens iTunes but does not link to the item.

When I click on a "View in iTunes" link, it redirects and iTunes opens, but only on my Album page. The links do not go to the item mentioned.

Here's a link to a thread that solved the problem for me:
http://discussions.apple.com/thread.jspa?messageID=12552345&#12552345
The culprit was that the Flash plugin needed updating for FF. That was it.
Go to Firefox; Preferences; General (tab); Add-ons; Manage Add-ons; Plugins.
I clicked on Find Updates and immediately updated the Flash plugin.
Hope this helps others.

I have 2? How do I sync selected photos from my IPad to my IMac w/o losing all photos on my IPad and getting the phoos o my IMac. ou see I have two IMacs with different sets of photos. Also want to convert all Apple works docs to pages docs on my IMac.

I have 2? How do I sync selected photos from my IPad to my IMac w/o losing all photos on my IPad which will be replaced with the photos on my IMac.You see I have two IMacs with different sets of photos. Also want to convert all Apple works docs to pages docs on my IMac. Is there and app available to do the former. many thanks. b

The iPad and related software is designed to sync with only one computer. I suggest transferring the photos from one of your iMacs to the other so that all photos are on one Mac. Same for all other files you want to sync over.
To get those AppleWorks files to the iPad you'll have to determine if Pages will open them. If it will then use the file sharing feature of iTunes to copy them to Pages on your pad.
If Pages will not open the AppleWorks files directly you'll have to save them in some format that Pages will read. These include but may not be limited to Pages and Word formats.

Page Viewer to have links open a different page

Similar Messages

Maybe you are looking for