Page w/3 Iviews will not display all iviews thru Portal Role?

Hello All,
I am having a problem with getting 2 of 3 iviews to display through my portal role(s). 1 of the iviews is a copy (generated thru the wizard with same properties) of the SAP Bank information iview and the other 2 I created in the KM content (1 is an image and the other is html). If I preview the page, I see all 3 of my iviews with no problem.
Just a little history, I created a new area page called payments which I tied Bank Information and w-4 to via config in the back end. I z copied all my resources and tied the correct PCD to them.
It almost seems that it is still calling the SAP delivered Bank information? But, I checked all my config and nothing that is configured is pointing to there iview/page?
Any suggestions would be greatly appreciated.
ESS 1.0 - EP7.0
Thanks,
Mike

Hello Priya,
Thank you for getting back to me so quickly on this. I did create a z copy of the bank information service and called it z_employee_bank_us_serv05. I created the iview with application name 'per_bank_us' and as for the 'Application Parameters', I did not fill anything in which leads me to my next question.
I know when I create a new area, that I need to fill in the application parameters of the path to the 'Area group pages'
(Example: sap.xss.menuarea=Z_EMPLOYEE_BENEFITPAY_ERP2005&sap.xss.menuargrp=Z_SAPDEFAULTESS_ERP2005&sap.xss.menuhdr=SAPDEFAULT),
What would the verbage that would need to be added to the application parameters for this just to point to the service?
THX

Similar Messages

  • I wanted to know if others were having difficulties getting All Day Events appear in the Notification Center in iOS 7.   Currently my Calendar in the notification center will show events that are at certain times, but they will not display All Day Events.

    I wanted to know if others were having difficulties getting All Day Events appear in the Notification Center in iOS 7.
    Currently my Calendar in the notification center will show events that are at certain times, but they will not display All Day Events.

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • HT1430 My inbox will not display all messages

    My inbox will not display all messages

    Close the mail app and reboot the iPad.
    Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the mail icon. Tap the home button twice.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Drop downm menu will not display all options

    On certain websites the full drop-down menu will not appear when a tab is clicked on, as if blocked by images on the current webpage. Same problem on internet explorer! I cannot access the drop-down options that I need...

    If you are experiencing the same issue on another browser then it's not a Firefox issue and the support we can provide to solve this may be minimal.
    Hello,
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!
    Thank you.

  • One of the pages in my website will not display the Amazon links to books I sell. Only one book, wiich is not on Amazon displays on the page. On Internet Explorer, all my books display. why?

    Ever since converting my website to WordPress the "Recommended Reading" page doesn't display the book I listed that link to Amazon. Only one book linked to another website displays, but not of the Amazon Books.
    This does not happen on Internet Explorer. I have asked this question last week but have not received a response.
    Can you help? Go to: www.transitionexecs.com and click on "recommended reading" to see what I mean.

    Do you have any ad-blocking software?
    Those links have ad in the url that might trigger such software.
    See:
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Photoshop CS3 will not display all available actions in Actions folder

    Windows XP Pro - CS3 Extended
    I have appprox 400 actions. When I open the actions palet, then go to the actions options (clicking on the small downward pointing triangle in the upper right corner) I can see my options for actions, placed in a vertical column at the left hand side of the screen. There are 5 additional columns displaying the actions I hae, in alphabetical order. The 5th column ends in the "F's" even though I have actions starting with letters of the alphabet going all the way through the alphabet.
    If I chose to 'Load Actions' a dialogue box pops up showing the actions folder (the one contained in the presets folder), but no actions appear. If I view the folder from Windows file explorer, I can see all of the actions.
    Is there a limit to the number of actions CS3 will display? Why do I not see any actions shown in the Load Actions dialogue box?
    I use a plug-in manager to limit the number of plugins CS3 loads on startup. Is there something similar for actions?
    I appreciate all comment and help.
    Thanks very much.
    [email protected]

    http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/is-there-a-com mon-step-to-repair-windows-installer/136da4c2-0261-e011-8dfc-68b599b31bf5

  • The Google sign-in page appears garbled and will not display. I have tried clearing cookies, the cache, uninstalling and reinstalling flash...

    and uninstalling and reinstalling firefox, all to no avail. I have included a screenshot of the issue. Thank you for your help!
    http://i.imgur.com/TLM2p.jpg

    You can check the network.http.* prefs on the about:config page and reset all bold user set network.http prefs to the default value via the right-click context menu -> Reset.
    Check at least:
    * network.http.accept-encoding: gzip,deflate
    If you do not keep changes after a restart then see:
    *http://kb.mozillazine.org/Preferences_not_saved
    *https://support.mozilla.org/kb/Preferences+are+not+saved

  • Content Query Web Part will not display all fields.

    I would love some assistance on this.  When I choose fields to display in the Web Part they do not appear.  And I should say the the article "How to: Display Custom Fields in a Content Query Web Part" on the Developer Network is
    a great start but it is only applicable to '07 and '10.  Where is the detailed info for SP 2013??

    Hi,
    According to your description, my understanding is that you want to display custom columns in Content Query web part in SharePoint 2013.
    Per my knowledge, the method for SharePoint 2013 to display custom columns in Content Query web part is the same with SharePoint 2010.
    The method in the link below is also can be used for SharePoint 2013:
    http://msdn.microsoft.com/en-us/library/ms497457(v=office.14).ASPX
    Do you encounter any issue when customizing in in a Content Query Web Part?
    Here are some links about customizing the ItemStyle.xsl to display custom columns in Content Query web part in SharePoint 2013 for you to take a look:
    http://prafulgoyal.blogspot.in/2013/04/sharepoint-content-query-webpart-oob.html
    http://social.msdn.microsoft.com/Forums/en-US/49739730-47c1-43df-9d0e-ad506e6ca31b/display-multiple-columns-in-content-query-webpart
    http://social.msdn.microsoft.com/Forums/en-US/1484df2b-0fb9-4b58-b833-a75019db88c7/content-query-display-multiple-columns?forum=sharepointgeneral
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Updated to the latest revision. Firefox will not display my chosen home page without clicking on home icon.

    Since latest update...Firefox will not allow a new page to be opened from a link in a current page. It will allow a new tab to be opened (with tabbed browsing checked) but i prefer a new page. Even in tabbed browsing links to things like a pdf will not work at all.
    Firefox WILL NOT close. X-ing out will close the window but I can not get back to Firefox without closing it in task manager.
    Firefox will not display my chosen home page without clicking on home icon.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Cross References Will Not Display Page Number

    Got some documents created in InDesign CS3 (MAC). When bringing them into CS4 (Windows) and trying to create a paragraph cross-reference the page numbers will not display. All the other text in the cross reference ("paragraph", the word "page", etc.) displays correctly. Even the cross reference under the "hyperlinks" toolbar shows nothing (instead of the usual # indicating a page number).
    However If I copy some of the same pages into a new document and create a cross reference in it the page number displays correctly. But since it's over 300 pages I really would hate to have to do that!
    Any ideas?

    Is it maybe because CS3 does not include the cross references function (not a feature until CS4)?
    That's a real problem if we use an outside source to create a lot of our documents and they're working in a previous version.

  • Adobe PDF files will not display when called via a link in page (FF 4.01)

    adobe PDF files will not display when called via a link in page.
    This happens when testing new web page from DWeaver CS5 - all other browser tests are OK (IE9, Safari5.05, Chrome etc.)

    [moved to the Adobe Reader (desktop) forum]

  • Oem web page will not display after O/S dst patch

    Hello,
    The Grid web page will not display after we DST patch for the o/s.
    All below start fine without any errors:
    emctl start oms
    emctl start iasconsole
    opmnctl startall
    emctl start agent
    The Grid web page is not displaying. What might happened after the o/s dst patch that might cause this? Our GRID is 10204 with a 10104 repository. The 10104 has not yet been dst patch.
    What logs should I be looking at to figure why the web page is not displaying? Thank you.

    Provide the output of these comands:
    $OMS_HOME/bin/emctl status oms
    $OMS_HOME/opmn/bin/opmnctl status
    $AGENT_HOME/bin/emctl status agent
    $DATABASE_HOME/bin/sqlplus "/ as sysdba" << EOF
    SELECT STATUS FROM V$INSTANCE;
    EOF
    $DATABASE_HOME/bin/lsnrctl status LISTENER_NAME
    Regards

  • Page will not display properly with inline Frames

    I have a html page that will not display properly in Dreamweaver. I have a basic understanding of html and want to be able to edit a website in Dreamweaver that was given to me. It looks fine in a browser, but in Dreamweaver some of the content is missing and displays the following message, "Your browser does not support inline frames or is currently configured not to display inline Frames". I was able to open it without any problems using Microsoft Front Page, so is it possible to view and edit it in Dreamweaver?

    Without seeing your page, I'm guessing that your page contains server-side includes, iframes and  scripts to other files on the server that populate page with content on the server's end.  You can't see it in DW because you don't have all the files in your DW local site folder.  You said this views fine in FP.  Was your page created in FP with FP proprietary tools?
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb

  • Flash will not display on cfm page

    For some reason my coldfusion server will not display any
    Flash (including Flash Forms) If I change the page to html it
    displays fine, also there are no issues with my dev machine, both
    machines are running cf8. Any ideas?
    Thanks in advanced
    Cavan

    this is the typical answer that everybody asks check he CFIDE
    folder, but guess what, the folder is accessable and all the script
    files can be loaded by the browser but still ... no cfform flash
    displayed.
    need more support for this issue, i can use all the cfform
    features accept when trying to enable the format=flash and this is
    what isnt processing correctly,
    the developement server works fine but production server
    doesn't and the CFIDE directory has the right file permissions and
    is assessable to the browser.

  • My apple TV will not display anything although it [the TV] meets all of the requirements. It worked for about four or five days and than stopped yesterday, but when i brought it to the apple store, it connected fine to their tv. Any help or suggestion?

    My apple TV will not display anything although it [the TV] meets all of the requirements. It worked for about four or five days and than stopped yesterday, but when i brought it to the apple store, it connected fine to their tv. Any help or suggestion?

    mrdctaylor wrote:
    Since I updated to the latest/greatest version of the software I can no longer put my Apple TV to sleep by holding down the middle button.
    Thanks!
    Apple have changed this setting with the Apple TV Software Update 5.1:
    About Apple TV (2nd and 3rd generation) software updates
    Feature
    Summary
    Shared Photo Streams
    Accept invitations for Shared Photo Streams, browse photos and comments, and receive notifications of new content.
    AirPlay
    Send audio content from Apple TV to AirPlay-enabled speakers and devices (including AirPort Express and other Apple TVs). Also includes the ability to require an onscreen code to use AirPlay with your Apple TV.
    iTunes account switching
    Save multiple iTunes accounts and switch quickly between them.
    Trailers
    Search movie trailers. In the United States, see show times for local theaters.
    Screen savers
    New Cascade, Shrinking Tiles, and Sliding Panels screen savers.
    Main menu
    Reorder icons on the second page by holding down the select button on the remote.
    Subtitles
    SDH support for the deaf and hard-of-hearing as well as improvements to viewing and selecting subtitles.
    Network configuration
    Support for setting up advanced network options using configuration profiles. Seehttp://support.apple.com/kb/HT5437 for more information.
    Stability and performance
    Includes general performance and stability improvements.
    If you don't like this, you can leave feedback here: Apple Feedback

Maybe you are looking for

  • Photomail in PSE 7 and/ or 9 - need help

    Somehow I no longer can add text in my photomails (both in PSE 7 and 9 (trial version), where I could do this before. Has someone any ideas on how to fix this for this is one of the features I really like in PSE and also was the reason to install PSE

  • How to change author and producer name in garageband?

    I would like to change the author name and producer name completely in my garageband.

  • Leopard iCal Server, iPhone & MobileMe - best way to set up?

    Hi there, hoping someone can help with this scenario: In our office (approx. 30 people running Leopard), we connect to an iCal Server in order to have a shared CalDAV diary. Currently, everyone logs in as the same CalDAV account. Within this account

  • XI and PI differences

    I just have a few simple questions. I took BIT400 class and had things basically figured out, and then my new company upgraded to PI 7.1 and now there are things either missing, or named differently. What happened to sender agreement, receiver agreem

  • Restricing CO11N confirmations for TECO orders

    For production orders with partial confirmations and TECOed say  TECO & PCNF, PDLV  how to restrict further confirmation happening in CO11N Thanks & Regards Manikandan .J