Page Width in INDESIGN

Hi,
I'm trying to create a banner in Indesign but I need to excede the maximum page width of 5486mm...is there a way of pasting 2 pages together? It's to make a PDF...
Thanks!

Scale it down and keep in mind that PDF has a limit of 200 inches (which
is less than InDesign 216 inches). I'm in the middle of a project like
that myself and I'm using a 25% scale for the graphics.
Bob

Similar Messages

Setting different pages widths in different sections - Pages 5.2

In Pages 5.2, how does one set different page widths (margins) in different sections?

You can't. Margins apply to the entire document.
What you can do is set the margins to their max width and then use left and right indents for the sections you want narrower.
Peter

How can I make a page transparent in InDesign CS4?

Hello and thank you all for your help in advance!
I would like to make a page transparent in InDesign.
When the magazine is printed it will be an overlay page with font printed on it where you can still see the image underneath. I was wondering if this is possible.
I'm not quite sure if it has a technical name to it or not so I uploaded a picture of what I'm speaking about to Tinypic.
http://i46.tinypic.com/29m1vk3.jpg
(routes and lines on top on the semi-transparent page, map on next)
Thanks for your help!
Nora

will these subjects actually be printed on separate pages or do you want to overlay some images on one page with type on the same page?
If the former, add and use layers; if the latter design one page and save it as a pdf. Place that pdf on a lower level layer, lock the layer, and work on a higher layer.

Control the page height and page width of pdf report using pasta_pdf.cfg

Hi All,
I've followed the note: 338990.1 (how to print publisher PDF reports via the concurrent manager) in metalink to print a PDF REPORT. Everything work fine except the page height and page width is used as default (8X11). Is there anyway that i can custom page height and page width size such as: legal (8.5X14).
current set up in pasta_pdf.cfg
[DEFAULT]
%% ============== Preprocessing Command ==================== %%
% Pasta can use a preprocessing command to invoke any executable
% that supports an input file and an output file (a filter program).
% You can use redirection. Pasta will invoke the filter program
% to preprocess the Pasta output before passing it to the printing
% command. By using the preprocess option, you can generate output
% formats other than the formats Pasta currently supports. For
% example, you can generate PCL output.
% You can use {infile} and {outfile} in this option.
% {infile} is the output file generated by Pasta. You can use
% it as input for the preprocessing command. It is a temporary
% file and will be deleted after being passed to the
% preprocessing command. {outfile} is the output file generated
% by the preprocessing command. Pasta names it temporarily and
% it will be deleted after being passed to the printing command.
% If you want to keep it, you can name it by using the '-o'
% command line option. Pasta will copy {outfile} to the file you
% specify.
% Preprocess for PDF output
% This is an example for PDF output to print.
; Xpdf
preprocess=/usr/local/bin/pdftops {infile} {outfile}
; Ghost Script
; preprocess=pdf2ps {infile} {outfile}
; Acrobat
; preprocess=acroread -toPostScript -pairs {infile} {outfile}
%% ============== Printing Command ========================= %%
% You can specify the printing command and options you want
% to use to print your report. Pasta will pass the final output
% to this command. {printername} will be replaced by the
% actual printer name passed through the command line option
% (-pn), so in most cases you don't have to change these
% options.
% for UNIX platform
printCommand=lp -c -d{printername}
% for Windows platform
ntPrintCommand=print /D:{printername}
%% ============== Error Log File =========================== %%
% This tells Pasta to create a log file. The default error
% output is stderr.
;errorlogfile=pasta.log
NOTE: pasta version 3.0.4
form server 6.0.8.27.0
third party tool is pdftops
Thanks
Kevin

i think that can be down from the printing direver/styles/prt files when you added the printer at your apps system check the follwoign for more info.
( How to Implement Printing for Oracle Applications: Getting Started )
Note:269129.1
(Step By Step Guide to Set Up a Printer in Oracle Applications)
( Note:60936.1)
fadi
http://oracle-magic.blogspot.com

Auto adjustment of page orientation causes printing issues with documents that have a page width greater than its page height.

Hi,
Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
documents that have a page width greater than its page height.
In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
This behaviour causes printing problems: the page prints out 90° rotated.
I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
Word 2010 seems to force the page orientation settings.
Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
This is very annoying, since we have to print official documents of a municipality (driver's licences).
Is there a workaround for this issue?
Regards,
Laurent Grandgaignage
Sysadmin Gemeentebestuur Stabroek, Belgium

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can follow these steps to test this issue
Step 1: Repair Office 2010
1.
Click
Start, and then click Control Panel.
2.
Click
Programs and Features.
3.
Click the
Office 2010 program that you want to repair, and then click
Change.
4.
Click
Repair, and then click Continue. You might need to restart your computer after the repair is complete.
Step 2:
Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
Windows Vista and Windows 7
a)
Exit Word 2010
b)
Click
Start.
c)
In the
Start Search box, type the following text, and then press
ENTER:
1.
%userprofile%\appdata\roaming\microsoft\templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
Microsoft Windows XP
a)
Exit Word 2010
b)
Click
Start, and then click Run.
c)
In the
Open box, type the following text, and then press ENTER:
%userprofile%\Application Data\Microsoft\Templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
f)
Close Windows Explorer.
How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
http://support.microsoft.com/kb/826845
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

How do I set Page Width to Multiple Pages?

How do I set Page Width to Multiple Pages?
I notice when Cross Tabs are used, the report spans over several pages in width. Can I set this option without using a cross-tab? Since I am having trouble finding a paper width that is 100 inches wide, I was thinking of just using multiple pages.
Thanks,
Linda

Hi Linda,
Try inserting an OLEDB object and select a bitmap and insert a blank bitmap in report header. Now go to preview and right click on OLEDB Object go to format graphic>picture>change the width of the picture
If the width exceeds more than the width of the page then it create virtual pages.
Hope this helps!
Raghavendra

How do I move a page or delete a single page in CS6 indesign are keep format?

I created a 75 page book in InDesign CS6. The template had double-sided right and left facing pages, each with a black border and page number in the center bottom of the page.
As an experienced InDesign user, I had very few challenges putting the document together. Once completed, I edited the images and attempted to rearrange some. I traded some even numbered pages with odd numbered ones. I added a few pages and deleted others. Then I discovered that many of the pages were not formatted correctly. Numbers were no longer in the center. Borders framed only 2/3 of pages, shifting right or left onto the pasteboard.
After careful study, I discovered that everytime a single page was moved, all the subsequent pages were formatted incorrectly. If two successive pages were moved together, formatting remained appropriate.
I called Adobe for support. I called over and over again. The first level of support required me to describe the problem. The low level support was repeatedly stumped. After considerable time on the phone, they escalated the case and told me someone at the next level would call me back within 72 hours. This happened 3 times. I was never called back within 72 hours. I was called back a week after my third call when I was several hundred miles from my computer and the nearest WiFi. I was given yet another 72 hour window in which I was supposed to sit by my phone and wait for a call. Again no one called.
I called again and again. I explained my problem over and over. At this point, after being cutoff three times this afternoon and once this morning, I have come to the conclusion that not only does Adobe have no way to solve this problem, they lack the courtesy to tell me so.
I am using a Macbook Pro, previously with 10.7+ and now with system 10.8+. The error is clearly in the program. I have a clumpsy way to do what I want but I can only put in page numbers page by page.

https://www.dropbox.com/s/74iqzfbqj8r01v7/indesign%20problems%202-3.jpeg
This link shows the document as it originally was.
Next I switched page 2 with page 3. (so 3 comes first).
https://www.dropbox.com/s/pvicu6zvr87j5tz/indesign%20problems%203-2.jpeg
This link shows a page from a longer document and the misplacement of Master page set-up. Note that some pages have correct border and number placement while others do not. The border extends beyond the page onto the pasteboard.
https://www.dropbox.com/s/ade4580gx0lleyd/document%20with%20several%20incorrectly%20format ed%20pages.jpg

How to Add a page Item in Indesign Library Panel

Hi All,
I am trying to add page Item in Indesign Library Panel using
ILibraryCmdUtils::ProcessLibraryAddItemCmd()
But it shows the message of Heap corrupt while processing the commmand.
Can any one help me out with some code snippet ?
Pete. M. Mitchel

Hi,
Iwas also suffering fro the same problem.
Better to use "ILibrarySuite::DoAddToLibrary()" method.
Hope it will help you.

How can I import text produced in Pages into Adobe inDesign?

How can I import text produced in Pages into Adobe inDesign?

Menu > File > Export > Word .doc/x
I doubt it will do graphics and layout, but maybe, depending on your version of Indesign you may hit lucky (but probably not).
Peter

I also have a .csv file with the name of a jpeg in one column and a text description of each jpeg in a second column. Is there a way to automatically insert one jpeg (photo) and its corresponding text, each pair on one page, into a Indesign document?

I also have a .csv file with the name of a jpeg in one column and a text description of each jpeg in a second column. Is there a way to automatically insert one jpeg (photo) and its corresponding text, each pair on one page, into a Indesign document?

I would also recommend to write the description into the meta data. This would allow to place a text frame above the image and it is possible to add meta information and file name automatically together with the image, when you place it or even in a prepared template.
Meta data information can be written easily in Bridge in the Meta File Workspace.

Copying a page from one InDesign document to another

I have a page in an InDesign document (which contains graphics) that I would like to copy to another InDesign document, but Copy / Past does not work.

Have both files open...
In the source file open the pages panel and select the page(s) you want to copy, from the panel menu choose move page(s), and select the destination file and specify a position.

Move group of pages from one InDesign file to another InDesign File using VB.Script

Dear team,
I am trying to move group of InDesign pages from one indesign file to another indesign file using vb.script.
I have written the code like
Dim Pages=IndDoc.Pages
Dim Mytype=TypeName(Pages)
Pages.Move(InDesign.idLocationOptions.idBefore,IndDoc1.Pages.LastItem)
but it is giving an error as method Move is not a member of Pages
please give mme the solution to move the Multiple pages or a group of page from one Indd to another Indd.

Hey Peter, if I wan to move several page that part of Auto Flow text, I checked the "delete page after moving" but the content still there, not deleted.
Is there any way to delete it automatically, just to make sure I have moved that autoflowed page?

Reporting Services - Horizontal Scrollbar not scrolling sometimes fields exceed page width

We have a landscape report with lots of fields, causing report to span in width, more than page width. We don't print the report, just view it. Problem is that sometimes when previewing the report, the horizontal scroll bar opens to a size of the whole report
window and there's no actual scrolling functionality to have the report show what's to the right of the data shown.
We checked this with IE8, IE9, and as it seems there are entries on the internet about such problem, but we haven't encounted an entry with solution / bypass to this problem, when relating to preview within report builder / VS / Reporting Services in
IE (they relate there only to reportviewer control if at all).
We did find that in this event, manually zooming the IE window where the report result is shown, helps the horizontal scroll bar go back to what it should be, and work, e.g. zooming down to 75% and returning in zoom up to 100%....
Can you please advise ? Thank u

Hi moital,
Just as you said, I still think the issue is caused by Internet Explorer. We can try to
run IE in
compatibility mode or
disable third party add-ons
of Internet Explorer (IE) to check the issue again. If this issue
is still existed, I suggestion you post the question in the following forum:http://social.technet.microsoft.com/Forums/ie/en-US/home?category=internetexplorer.
It is appropriate and more experts will assist you.
Thank you for your understanding and support.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Cannot adjust page width to fit to screen size on some PCs with IE

Hello friends, I am using APEX 4.0 and IE9 on different Windows 7 PCs . The page will go way off the screen to the right on one PC, and fits nicely inside the screen on another PC. This problem does not occur in Firefox on any PC. I have used Firebug to try to isolate the template or css settings. Using Theme_4, I have a breadcrumb region and 4 reports regions. One of the reports regions is in column 1 and 3 regions are in column 2. Display point is Page Template Body (3. Items above region content) for all the reports regions. The CSS is #themes/theme_4/css/theme_4_0.css. The template is One Level Tabs (Right Sidebar/Table Based). I tried various width="" using px and % under Edit Page Template-Definition-Body (see below). I tried style="width:800px" within the <div> tags. I have tried various other changes to theme_4_0.css and apex_4_0.css with no visible change to the page width on the obstinate PCs. I reset IE setting and deleted all personal settings on both PCs with no changes to either one, one fits on the screen and the other does not. The issue is that most of our users use IE so most of them will have to live with using the horizontal scroll bar to see the regions in column 2, unless we switch them all to Firefox (not a bad option, except that option works for our users only, we have no control over external browsers). I have tried suggestions from many discussion threads, as this problem has bothered us for quite some time. I know this is an IE problem, but any help is appreciated. Thank you.
"|" represents screen size and "-" is the regions/content for the "bad" PCs.
|----------|----------
The "good" PCs look like this:
|----------|
Peter
<div id="body">
<table class="tbl-body" cellspacing="0" cellpadding="0" border="0" summary="">
<tbody>
<tr>
<td class="tbl-main" width="100%">#REGION_POSITION_02##BOX_BODY#</td>
<td class="tbl-sidebar">#REGION_POSITION_03#</td>
</tr>
</tbody>
</table>
</div>

BD...
I think your concerns are very reasonable. But I want to sort of refocus things a little bit for you here... it's not really a PC vs Mac issue... Rather, it's specifically an Internet Explorer issue. And you might say that this is synonymous...still 98% of the world uses IE, and you would be correct. Hopefully when the final version of IE7 comes out, it will finally embrace some of the modern day OPEN web standards without trying to make too many standards of its own (this is Microsoft, though).
Anyways, in the meantime, I guess we all try to make the best of it. It's very easy to conclude that iWeb is not a viable tool for you, as long as you have something else to "fall back" on. With my limited knowledge of all things HTML, I have no such luxury. Instead, I have put up a notice on my site for IE users only that the site might not look its best on IE....this notice also encourages IE users to use FireFox, which is very much like Safari and will in 99% of cases display your iWeb pages just like you expect. You can see how I've done this here (but you have to surf from IE)... http://blog.dirtdoog.com
I think many people in the PC world understand the limitations of IE. Certainly many don't, but you have to consider your likely audience, I guess. I believe that your website content is king. If your content is compelling enough to your intended audience, they will jump through hoops to see it in its full glory....but you have to make them aware of the problem. That's why I have chosen to take the path that I have taken.
Let me know what you think.

Will pages created in Indesign 5 on a mac open on a PC to be edited?

Will pages created in Indesign 5 on a mac open on a PC to be edited?

Mac/Windows INDD files are totally compatible. It’s the version number you need to be aware of, not the platform.
Speaking of which, InDesign 5 is CS3 and INDD files are not backward compatible.
Bob

Page Width in INDESIGN

Similar Messages

Maybe you are looking for