Page within a Page

In Fireworks, how do I create a Frame that will display a
login page using my current webpage as a "Frame" for the simple
login page ?

showStopper, please!
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"djinn" <[email protected]> wrote in
message
news:g9hcsr$77$[email protected]..
> PJR wrote:
>> LOL, Nah not I. Hell I used to use them, (remember
doublered?) and still
>> maintain if you're on a very slow connection perhaps
they are a
>> solution. But I am now fully aware of the problems
they can cause usually
>> outweigh the problems they solve. Good to hear from
you.
>>
>
> Only pulling your plonker Peter ;-)
>
> doublered - no don't remember it - one of yours? - I do
remember
> showtopper though - it was yours - at least that was the
rumour Pablo put
> out ;-D
>
> I say each to their own regarding construction - but
good to know the
> pitfalls - I don't know if there are more up-to-date
scripts available
> similar to these......
>
>
http://www.dreamweaver-extensions.com/framebuster.htm
>
> .. but if using frames you should have something similar
in place!
>
> Good to see you too Peter.....
>
> --
> chin chin
> Sinclair

Similar Messages

I Would like to create a page within a page feel. How do I do this in CS3?

Hi
I have a basic understanding of dreamweaver however I'm
trying to learn more difficult parts of the software. I'm trying to
build a site which has a layout quite similar to
www.seasicksteve.com/. I want a page within a page feel, but I have
no idea how to do this. Can anyone help me?

It could be accomplishes with DW "Set text of container" (or
layer)"
behavior.
"ktbl83" <[email protected]> wrote in
message
news:go795r$ke7$[email protected]..
> Hi
>
> I have a basic understanding of dreamweaver however I'm
trying to learn
> more
> difficult parts of the software. I'm trying to build a
site which has a
> layout
> quite similar to www.seasicksteve.com/. I want a page
within a page feel,
> but I
> have no idea how to do this. Can anyone help me?
>

Page within another page

We're looking at designing a results page that has several sections. Depending on the type of job (variable passed to that page) we want to show different items, buttons, reports, etc in each section. Some sections may be used for multiple types of jobs. The job types will grow over time.
I know we can use the display criteria for each element to do this but it seems like that will be a lot of work to maintain. What we'd really like is to be able to define "sub" pages and have then programatically display different "sub" pages within the main page.
Define 5 "sub" pages (each contains its own items, buttons, processes, validations.....)
page A
page B
page C
page D
page E
Define main page.
Has 3 areas
section 1 section 2
section 3
If we pass var xxx to main page
section 1 - displays page A
section 2 - displays nothing
section 3 - displays B
If we pass var yyy to main page
section 1 - displays page A
section 2 - displays C
section 3 - displays D
If we pass var zzz to main page
section 1 - displays page E
section 2 - displays B
section 3 - displays D
Is there a way to embed pages with in another page?

Hi
There are a few ways to do this. You could use iFrames to contain another page, you could just use conditional region display, or you could try adapting this...
[http://munkyben.wordpress.com/2009/05/10/flexible-ajax-calls-1/]
Cheers
Ben

Welcome Page within Welcome Page?

I created a Welcome page for each of the colleges in our university off the home page of our iTunesU site just fine. Now for some of the larger colleges, I want to set up departmental pages within that College's Welcome page, but when I use the "Create Page" tool, it won't let me select any Welcome page templates, just course templates. Is there a limit to how many welcome page levels you can have in iTunes U?

Welcome pages can only be used at the first and second tiers; the third tier must always be courses.
So you have:
- Welcome Page (College)
| -- Welcome Page (Department)
|------ Courses
| -- Welcome Page (Department)
|------ Courses
Ken Newquist
Lafayette College

Inserting pages within a Pages file

I have a large Pages file with hundreds of illustrations throughout. I need to insert and add some pages in the middle. When I insert page and section breaks, a new page is created all right, and the text flows appropriately down, but the illustrations do not move. How do I insert a page and have the illustrations move down along with the text?

That is called planning.
Personally I wouldn't do a 250 page book in Pages, but if you are going to do it, check out first whether anybody is going to want it in that form and certainly structure it so it works.
It will take a while but with patience and application you will be able to move all your images inline. It should help your layout if you do it properly.
Peter

How to create pages within a page?

Hello,
I'm still pretty new to Dreamweaver and I'm wondering if someone could point me in a direction to learn to create a specific thing for a website. I want to make something like at the bottom of this website: http://www.andymartin.clara.net/iframes/
He has the window within the main window there, that changes with the three links below it without actually changing the whole page. I was wondering if someone would be kind enough to point me to a tutorial on how this might be done? I'm working with version CS3. Thank you so much!
Jason

Jason
I would stay away from Iframes, they are problematic on a number of different levels. I would suggest that you start to learn html and css and get off on the right foot. Here is where I suggest you start.
http://www.w3schools.com/
Gary

HTML snippet to make a Page within a Page through link

I am trying to create a html snippet the opens within one of my pages each time a link on the left side of the page is selected. It's for a team page - each time a user click on an employees name, I want the content to open in within an iframe on that same page. Does anyone know if this is possible? Is so, if the code needed to make this happen could be provided for me... I would be forever grateful. Thanks.

I tried putting "page2.html" in a folder within the MainSite Folder, naming the folder "page1", but all the pictures, formatting, etc. doesn't work for "page2.html".
Try putting page2.html in a folder named "page1" within the MainSite Folder (hint - make sure you use DW's Files panel to move this file into that folder). Alternatively just save it there! In other words, if what you did isn't working then you did something wrong.

Open one page within a page

Hello I have a BSP page and a push Button on this screen.
However on the hit of this Push Button some code would trigger and then I want to open another web page.
Any Suggestions...
Thanks,
Ster

Hi Friend,
Within the ontest method,write the below coding for navigating from one page to another.
navigation->next_page( 'TONEXT' ).
TONEXT is a userdefined name.
Following that you should do the following procedures.
Double click on the application name and proceed with steps below
specify the name of the current page under start ,
specify the 'TONEXT' variable under navigationrequest and
finally specify the target page name under target
With Regards,
SHARMILA BRINDHA.M

Open a page within a page?

What I want to have happen: There is a main page for my site. There is a big rectangle in the middle of that page. Clicking on a link on this page does not move to another page, as such, it just changes what is displayed in this rectangle. How does one go about this?
Thank you for your time!

Have a look here....
http://iwebfaq.org/site/iWeb_iframe.html

How to make a page within a page in the URL address bar?

I have seen a lot of sites where the URL is something like this:
http://www.MainSiteName.com/page1/page2.html
How do you get that?
All I can do is:
http://www.MainSiteName.com/page1
I tried putting "page2.html" in a folder within the MainSite Folder, naming the folder "page1", but all the pictures, formatting, etc. doesn't work for "page2.html".
Any thoughts?

I tried putting "page2.html" in a folder within the MainSite Folder, naming the folder "page1", but all the pictures, formatting, etc. doesn't work for "page2.html".
Try putting page2.html in a folder named "page1" within the MainSite Folder (hint - make sure you use DW's Files panel to move this file into that folder). Alternatively just save it there! In other words, if what you did isn't working then you did something wrong.

Indesign CC 2014 crashes when duplicated pages within pages panel

running InDesign CC 2014 - mavericks 10.9.3. If I have content on say page one and within the pages panel I click and drag page one to the new page icon (something I do all the time to duplicate a page and it's content) it crashes InDesign. This is happening when I have copy pasted gradient mesh objects from illustrator to indesign. they paste in just fine, and I can copy paste those objects around, but not the whole page within the page panel

Hello march67,
Thanks for the test file. We could reproduce the crash.
We've identified the reason for the crash in your file. The problematic object is the RSS feed icon at the top right of the spread.
We've determined a fix for the crash and it should be available to all users in one of the upcoming patches. In the meanwhile, to prevent the crash, you could use the following workaround : Cut this object onto the clipboard. Duplicate the spread. Then paste the icon back in its place (Edit > Paste in Place).
Sorry for the trouble.
Thanks,
Ravi Kiran
Adobe InDesign team

How to cascade page skins throughout page groups ...

Is there a way to apply the same HTML Page Skin throughout all the pages within a page group without having to apply it to each page individually?
Is there a way to do this programmatically?

Hi,
You can achieve this using the templates available in page groups.
I never done using programatically. Sorry. :)
Regards,
Vijay.B

Simple button action that goes to a page within the same doc

I can't figure this out. I have a button I want to use that takes a person back to the first, or second page of the same doc. It's a catalog section with a table of contents. I need to make links for the pdf that takes people to certain pages within the same document.
In the Buttons panel, I see how to make the button, but when I assign an action, the only choice that makes sense is "Go To Destination", but I don't get or see any way to choose "page 2" of the document, or another selection method.
I did this before a few years ago on hundreds of pages, and when I open those old documents up to copy/paste the same buttons, they don't even appear to have actions on them anymore, as if it never happened.
So, what's the secret? Certainly there's a way to link to another page in the same ID file, no?

Finally figured it out. I do NOT use the button panel at all. No buttons needed. Just select the grouped object that I want for my button, and hit the "add hyperlink" button in the Hyperlink panel. Then choose "Page" from the menu that opens up and be on my way. What was throwing me for a bad loop, was that I had copied and pasted the button graphic form another document. Well, since the link made previously was broken now, I had the red flag in the Hyperlinks panel...and thus, the "new hyperlink" button was greyed out, sending me in circles. The minute I deleted the old hyperlink it carried over from the old document, the new hyperlink button worked again and all was well.
Thanks.

How to merge pages within the same document?

Can I merge pages within the same pdf document? I have two large maps, an east and west, can I put the two pages together to make one map?

How different are the layouts?
You can vary the left and right pages:
+Inspector > Layout > Section > Configuration > Left and right pages are different+
But the position of the headers, footers and margins will be the same.
You could make different designs and capture those but each would have to be its own section. This sort of thing works better in Layout mode, where every page is a different section, but you won't get automatic text flow nor TOC, footnotes etc.
Pages rapidly gets very clumsy when you try to do detail layout to this extent.
Peter

Using a different default component state within each page state

I am using a custom component in multiple page states but would like to have a different default state (for the same custom component) within each page state.
Is there anyway to use a different default component state within each page state .
When I change the default state at a component level it seems to go across all my page states. Any solutions?
Thank you

I guess I can just add that interaction for that component!
I think my brain is just catching up

Page within a Page

Similar Messages

Maybe you are looking for