Pagefile for SAP Erp2005 and Solution Manager 4.0

Hi all,
I've installed SAP ERP2005 and Solution Manager 4.0 on the same server with Windows 2003 Standard 32bit.
The RAM on this server is 3325MB.
How many paging file I must configure???
At the moment I configured the pagefile size as defined in the installation guide:
1 RAM + 8GB that is 12285MB.
Is it correct????
For both instance I set the PHYS_MEM parameter to 2328 (70% of the RAM)...is it correct??
P.S. How to calculate the [BE] parameters??
[BE] = maximum possible number of user calculated from the size of physical main memory
Thanks in advanced
Moreno

I agree with Yaroslav,
you should NOT set those values:
em/initial_size_MB |----    [PM] |----    [PM]   |Mbyte     |
|---    em/max_size_MB |---    20000 |---   100000   |Mbyte     |
| em/address_space_MB |-----    512 |-----   4096   |Mbyte     |
|---- ztta/roll_first |-------    1 |-------    1   |Byte      |
|---    ztta/roll_area |--- 2000000 |--- 3000000   |Byte      |
| ztta/roll_extension | 2000000000 | 2000000000   |Byte      |
|    abap/heap_area_dia | 2000000000 |           2000000000   |Byte     |
| abap/heap_area_nondia | 2000000000 |           0 |Byte      |
| abap/heap_area_total | 2000000000 |[PM]*1048576   |Byte      |
|-    rdisp/ROLL_MAXFS | [BE] * 100   | [BE] * 100   |8KB Block |
|---    rdisp/ROLL_SHM | [BE] * 100   | [BE] * 100   |8KB Block |
|---    rdisp/PG_MAXFS |---    32768 |---    32768   |8KB Block |
|-----    rdisp/PG_SHM |
so... that [BE] value is not to be used.

Similar Messages

Start Of Ramp-Up for SAP Portfolio and Project Management 5.0

Start Of Ramp-Up for SAP Portfolio and Project Management 5.0
Starting with this new release, the application SAP Portfolio and Project Management 5.0
replaces both the SAP Resource and Portfolio Management (SAP RPM) application and the
Collaboration Projects (cProjects) application.
Start of ramp-up for SAP Portfolio and Project Management is 19th of April, 2010. The end
of ramp-up is currently scheduled for 19th of October, 2010.
Functional Innovations And New Features
A detailed description of all new and/or enhanced functional innovations and features can
be found in the Release Notes:
[http://service.sap.com/releasenotes |http://service.sap.com/releasenotes]
-> SAP Solutions
    -> Release Notes SAP Portfolio and Project Management
There are some SAP Notes which are in general very important for SAP Portfolio and Project
Management 5.0 and which also serve as central points of entry to find import information:
SAP Note [1377104|https://service.sap.com/sap/support/notes/1377104]      FAQs - SAP Portfolio and Project Management 5.0
SAP Note [1402912|https://service.sap.com/sap/support/notes/1402912]      PPM 5.0: Supported Browsers, Java versions, etc.
SAP Note [1411953|https://service.sap.com/sap/support/notes/1411953]      PPM 5.0: Configuration Content
SAP Note [1436778|https://service.sap.com/sap/support/notes/1436778]      SAP Portfolio and Project Management 5.0: Restrictions
Kind regards,
   Florian

Thanks very much for taking the time to post the info Florian. I will update this thread as well if I run into any new information.
Do we have any idea on SAP's direction for Product Definition? PD is still version 2.0 and I heard that PD functionality will be incorporated into PPM 5.0 which does make a lot of sense. I very briefly went through the notes and config doc in this post and did not get the impression that PPM has any idea and concept management capabilities.

SAP Portfolio and Project Management: u201CCustomer Connectionu201D

SAP Portfolio and Project Management: u201CCustomer Connectionu201D
SAP Portfolio and Project Management is one of the first focus topics of the [Customer Connection initiative|https://service.sap.com/influence].
The related developments are delivered by SAP Notes and/or by Support Package (SP) only (in case delivery by SAP Note is not possible). Target releases are 5.0 (for all points) and 4.5 (for those points where it is technically possible and reasonable to downport).
[Composite SAP Note 1631964 |https://service.sap.com/sap/support/notes/1631964]collects and links all SAP Notes released for Customer Connection for SAP Portfolio and Project Management. It also includes a PDF file giving an overview of all released Customer Connection PPM developments as well as a PDF file with details about each released Customer Connection PPM development.
An overview about all influence channels for customers can be found under [https://service.sap.com/influence|https://service.sap.com/influence].
Kind regards,
Florian

Hi
Thanks for your Valuable information -Customer connection PPM.
Regards
PP

SAP Incentive and Commission Management (ICM)

Good Morning,
I have the following doubt.
There are is a Business Package for SAP Incentive and Commission Management (ICM) in the portal ESS/MSS?
Kind Regards

Hi,
SAP_BW_0ROLE_0008
This role performs sales and sales support tasks.
This role uses CRM ICM to view their personal sales commission and incentive items. They cannot view items for management or other sales team members.
For more information kindly check the following link
http://help.sap.com/saphelp_sm32/helpdata/en/1e/b60a7c6f2311d695b400b0d027ee3a/frameset.htm

Install both SAP ECC 6.0 EHP 4 and Solution Manager in C drive

Hi, SDN fellows.
I just want to confirm this.
I am trying to install SAP ECC 6.0 EHP 4 and Solution Manager in C drive. Are these OK, since they both will be installed under the C:\usr folder?
What precaution we need to install these two SAP components in the same drive (C)?
I am installing both components in MS Window Server 2008 R2 SP1 with MS SQL Server 2005 SP3.
Thanks,
KC

Hi, Nick.
Sorry, I missed the "IDES". I am installing SAP ECC6.0 EHP4 IDES system for training purpose within the organization.
I am referring to the Installation Guide - SAP ERP 6.0 EHP Ready ABAP on Window MS SQL Server (Based on NW 7.0 incl EHP 1). All downloaded installation files are from: EHP4 for SAP ERP 6.0/NW7.01 --> IDES --> --> Widnows Server --> MS SQL Server.
The OS is installed in C drive.
I have allocated 250GB in C drive and 200GB in D drive from SAN.
For IDES system (I know it is similar to the standard ECC), is it also recommended to install in D drive (separate from the OS)?
In this case, should I install both Solution Manger and IDES in D drive?
Or what is the best combination where I should install these two systems?
Thanks,
KC

How to monitor all SAP Server through solution Manager?

Dear Friends,
How to monitor all SAP Server through solution Manager?
Is it possible if yes then how? Please forward configuration and transaction also.
Please help me as early as possible..
Thanks,
Regards,
Sachin

Hi sachin,
You can monitor your sattilite systems through solution manager.
If you want to monitor systems in solution manager means you need to configure those systems in solution manager.
Before including the systems in solution manager we need to create a solution using tcode DSWP.
After that you can include the systems using tcode SMSY.
For configuring the systems we have lot of phases its very difficult to explain here.
Try to login to service.sap.com and help.sap.com find the helpfull guides.
i hope it will help you.
any issues post it.
kiran kumar.v

Can anyone explain difference b/w Schedule Manager and Solution Manager

Hi,
Is there any difference b/w schedule manager and solution manager or both are same. Plz do reply at the earliest.
thanks,
suresh

Dear Suresh,
Schedule Manager (SCMA):
Schedule Manager automates your routinue task. It facilitate the definition, scheduling, execution, and review of tasks that are executed on a regular basis, such as period-end closing.
Solution Manager - The SAP Solution Manager supports you throughout the entire lifecycle of your solutions, from the Business Blueprint thru configuration to production operation. It provides central access to tools methods and preconfigured content, that you can use during the evaluation, implementation, and productive operation of your systems.
Implementation of the mySAP Business Suite
·        All phases of the implementation project (Business Blueprint, Configuration) are performed centrally in the Solution-Manager system.
·        Central project documentation repository in the Solution Manager
·        Integrated Project Administration allows you to manage planning schedules, human resources and other project data.
Customizing Synchronization
·        The Customizing Scout, with which you can compare customizing in various SAP components, e.g. an ERP system with SAP MDM
·        The Customizing Distribution, with which you can synchronize customizing in various SAP components.
Test
·        You can use the Test Workbench to organize and perform tests at the end of a project phase.
·        Reuse of the project structure for process-oriented tests
Global rollout
Integrated authoring environment, with which customers and partners can create their own templates, which they can reuse in subsidiaries, e.g. in a global rollout
E-Learning management
Creation of training material and learning maps (computer-supported self-tuition courses) to train end users after the implementation of new functions
Solution Monitoring
·        Central system administration
·        Analyze your system landscape with Service Level Reporting
·        System monitoring in real time
·        Business Process Monitoring
Services
Access to programs and Services, which help you to monitor and optimize the performance and availability of your system landscapes, and minimize your operational system risks
Service Desk
Solution support with workflow to create and handle problem messages
Change Management
Management of change requests, with workflow for the monitoring and audit of changes and transports in your system landscape, with the Change Request Management.
Regards,
Naveen.

User synchronization issue between Active Directory and Solution manager.

Requirement:
Synchronize the users between Active directory and solution manager system.
What we did:
1. Created RFC connection (LDAP_RFC) for LDAP connector.
2. Created new LDAP connector that utilize the RFC (LDAP_RFC).
3. Created new logical LDAP Server(CUA).Here we have to maintain the connection
details to the physical directory.
4. We maintained the communication user that is used by the LDAP connector to bind the LDAP Directory Server.
5. In transaction LDAPMAP specific SAP data fields, we mapped to the desired
directory attributes.
6. Testing from LDAP transaction working fine. We are able to see the attributes and
values from Active directory.
Issue:
When executed the program RSLDAPSYNC_USER for user synchronization from t-code se38 with below selection .
LDAP Server = CUA (created earlier)
LDAP Connector = LDAP_RFC (RFC connection created created ealier)
In the tab: (Object that exist both in the directory and in the Database:)
Selected: Compare Time Stamp.
In the tab: (Objects the only exist in the Directory.)
Selected : Create in Database.
In the tab(Objects that only Exist in the Database:
Selected: Ignore Object.
Result from the report shows that connection to LDAP server is fine and 0(zero) objects in Directory.
The program does not create any new user in the Solution Manager system.
Any help on this issue greatly appreciated.
Thanks & Regards,
Harish

where did you see this error ? is there anymore details.
i think the account you are using for Sync does not have Replicate Directory Changes permission in AD. follow below article and give Replicate directory changes permission.
http://technet.microsoft.com/en-us/library/hh296982(v=office.15).aspx
Thanks, Noddy

Sizing for SAP BCM (Business Communication Management)

Hi All
We have to provide a server sizing to be used for SAP BCM (Business Communication Management) module which will be intergrated with SAP CRM and is to be used for call support. As far as we have reached, we require a Windows server and will host MS SQL database with an approx consumer data of 63 lacs consumers.
Please specify the sizing for this server
Thanks in advance
Lokesh

Sorry, forgot to ask how much physical memory you have on each host.
Let's split it to 2 topics.
1. For ECC, since OracleDB and non-unicode page which are the 2 major factors won't be changed, so I would think here we could just do a math, as long as host A has enough memory which is allocated for Oracle and ECC (extended memory) on host B to be added up.
2. For EP, memory tuning size is basically the same for HP JDK and SUN JDK, that each server node is allocated approximately 2.5GB RAM. Besides, 0.8-1GB RAM needs to be left for OS kernel. But in your case, host B is currently holding 200 users which is a big jump for host A(note: only active user quantity matters here).
That's fine if main physical memory is a little short for host A, utilizing multiple less powerful servers as 2nd tier application server to do the load balancing is also a solution with lower TCO.
Regards,
Effan

We have SAP CUA on Solution manager 4.0

Hi,
We have SAP CUA on solution manager 4.0,SAP BASIS component 700. Do you know what is the latest Support pack and version for solution manager and what is netweaver identity management.Which one is better for CUA environment
Thanks and Regards
Yakoob.

Hi,
Netweaver Identity Management (IdM) should replace SAP Central user administration (CUA) somewhere in the future. As far as I know SAP still supports CUA but doesn't develop further enhancements for it, because they see IDM as the new product. So when you still want to work with CUA then you can create a new one on your new SolMan and you have to move the administration to this one.
Regards, Basti

Search & Install SAP Notes using Solution Manager

Does anyone have specific documentation on how to search and install SAP notes using Solution Manager. I have read numerous times about this capability but have not found any success finding specific info on how this is done.
Can someone please share their experience? Can you also provide some documentation?
Thank you

Dear Ramesh,
Like what Rajeev has mentioned, you can use transaction tab in your message/ticket for searching for note or even deploying to satellite system.
for this in solman you need to maintain these 2 enties, so that it takes you to service market place.
trxn: dno_cust04
Field Name                             Seq                   Field Val
URL_DISPLAY_NOTE             1              http://service.sap.com/sap/bc/bsp/spn/sapnotes/index2.htm?numm={&1}&nlang=EN
URL_SEARCH_NOTE              1              http://service.sap.com/notes
Regards,
Shyam.

An advanced solution for sending email from Solution Manager (or CRM)

Hi all,
did anyone use blog "An advanced solution for sending email from Solution Manager (or CRM)"
<a href="/people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm:///people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm
I´ve got some problems:
I tried to implement your solution in our SAP system. I´m new to ABAP and so it´s a little bit try and error for me.
I´ve got some errors:
In method EXEC_SMART_FORM_WITH_TEXT (from note 935670) :
- method string_to_soli does not exist. There is a method xstring_to_solix.
When I change to method xstring_to_solix
- "L_STRING" is not type-compatibly to "IP_XSTRING".
In method ZSM_ATTACH_PHIO_DOCU:
- field DOCUMENT is unknown
Regadrs
Andy

Hi all,
did anyone use blog "An advanced solution for sending email from Solution Manager (or CRM)"
<a href="/people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm:///people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm
I´ve got some problems:
I tried to implement your solution in our SAP system. I´m new to ABAP and so it´s a little bit try and error for me.
I´ve got some errors:
In method EXEC_SMART_FORM_WITH_TEXT (from note 935670) :
- method string_to_soli does not exist. There is a method xstring_to_solix.
When I change to method xstring_to_solix
- "L_STRING" is not type-compatibly to "IP_XSTRING".
In method ZSM_ATTACH_PHIO_DOCU:
- field DOCUMENT is unknown
Regadrs
Andy

Urgent need for the creation of solution manager key please

Hello
Can i please ask you to create a solution manager key for me ?
i am stuck in my test installation of ECC6.
Here are my details :
       Instance name : sapdb1
       Instance number : 01
       Computer name : ap-hp1
Kind regards
Christophe

Hi Chris,
I understand the urgency. There are only two ways you can get a solution manager key. One by yourself. Otherwise, please create a message with SAP requesting a solution manager key temproarily. Unfortunately, even though we can create a solution manager key, it is not advisable to distribute the key in forums.
Hope this helps.
Thank you.

System Monitoring for Satellite System in Solution Manager

Hi,
I configured satellite system in solution manager through SMSY,and i created solution in dswp.I want to configure system monitoring through ccms agent,how to install ccms agent,how to configure system monitoring for satellite system in solution manager .Please guide me.
Thanku

Hi,
In Solution manager I did below steps. :
1) Activated background dispatching in Rz21 (Client : 000).
2) Created CSMREG user (In RZ21)
3) Generated the configuration file for agent (CSMCONF).
I down loaded the ccmagent_35-20001346.sar file.
What are the steps i have to do in satellite system.
Thanku

SAP Product and Portfolio Management Upgrade(PPM)

HI Everyone, A warm reagrds! W e are planning to upgrade our current SAP Product and Portfolio Management 4.0 to 5.0.While doing the Upgrade analysis I have come across below these questions..Has anyone earlier in this forum have come across
1.What are the side effects of this upgrade on existing system?
2. We have 21 client environment on top of the 3 standard clients provided by SAP. What can be the best approach for upgrading the systems? Some of these clients are used by project teams for prototype development , how would the upgrade affect their working (they are not working on this package)?
3. Our team is working on this package in one of the client and have created scenarios in the system. What will be the effect of this upgrade ? (this question can be seen as an extension to question 1)
4. How much effort would be required to carry out this upgrade and what will be the down time for the system?
I have check the service market place and help.sap but at present not getting much info..
Thanks for your time to read.. Please help!1

Hi,
it is an own separate NW AddOn, see SAP Note 1377104 (FAQs - SAP Portfolio and Project Management 5.0).
Kind regards,
Florian

Pagefile for SAP Erp2005 and Solution Manager 4.0

Similar Messages

Maybe you are looking for