Pager Settings in sap

Hi experts,
I am using ECC 6.0 with Sql Server 2005,
I have to create pager settings on my ecc 6.0 to receive messages on mobile phone through SAP.
Can anyone giude me. how to do that?
thanks in advance
Regards
Akshit sharma

Hi,
There will be two domains on for inbound and one for outbound.
If u want to send message from system to mobile sending domain should be default domainn set in SAPconnect and recieving domain should be your service provider to whom message will be sent.
For Detailed go through this:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80df3810-957d-2b10-e496-f73551c51582?QuickLink=index&overridelayout=true

Similar Messages

Changing default printer settings in SAP Portal

Hi,
When i am trying to print the report in SAP Portal, the default page setting is A3 , i need to change it to 8.5 * 11 inches.
Is it possible??
Thanks
Janc

Hi,
You can change the Page Settings in your Internet Explorer.
File --> Page Setup.
Try doing this.
Are you on BI 3.5 or 7.0?
Also, you are using the Query Designer or WAD ?
In WAD7.0 you can Export the Template with the Query and set the size as A4 or 8.5 x 11 inches.
While viewing the Query designer output also, you select the size. Default is A4.

Discoverer viewer -- export to pdf doesn't retain page settings.

Hi,
The report output in discoverer viewer is much different from that of plus. I am concerned abt the report headers. In discoverer plus, the headers are left, center and right aligned.
But in viewer, every thing is aligned center. How can I get the report o/p (same as that of plus) in viewer??
Thanks
Message was edited by:
boyz

Hi there
did you fix it in Viewer?
I am also getting the same issue, I have made my page setting in Discoverer Plus , when I go use Discoverer Viewer use the Printable page to get the PDF file, the layout does not shows the same page settings what I did in Discoverer Plus.
Thanks
ASIM

Export to PDF doesn't retain page settings

Create a report with lots of columns and then change the page settings to be landscape and shrink to fit. Now run the report and print the report as a PDF. It works as expected.
Now export this same report as a PDF. The export will not retain the page settings. Instead, it will export the PDF in portrait and it will not shrink to fit.
If you email the report to someone, it also doesn't retain the page settings.
I opened a TAR on this issue and I was told this was not a current feature of Discoverer. Exporting does not retain page settings by design and it would be an enhancement request to get this new functionality.
We build a lot of custom Oracle Reports right now so that users can drill from one level to another. With OracleBI Discoverer, I can now do this with linking to sheets. With Oracle Reports, I can render the report in PDF format which is a business requirement. With OracleBI Discoverer, I can do this too except I can't export the PDF because it doesn't fit on the page correctly.
Anyone else need this functionality?
On another "enhancement request" note, I would like to be able to schedule exports. OracleBI Discoverer is getting close to providing an alternative to Oracle Reports which is great because it is faster to build and deploy reports and it is licensed by the CPU so I don't have to worry about buying Report Builder licenses. Lastly, business users can build their own reports rather than someone in IT doing it.

ok, here's what I have found out (thanks to our Viewer guru, Matthew):
The print/PDF preferences are currently not saved, so you are right when you say you have to re-apply those settings.
However, there is a way to persist these changes within a session (note that since these changes are session-resident only, you will lose them once you exit Viewer).
The short one line explanation of the workaround is to make the changes using the 'Printable Page' link, generate a 'Preview' or the entire PDF report, and then use the worksheet breadcrumb link to return to the worksheet. This ensures that the PDF changes you made are available during the sesion to the worksheet. You can always undo these settings by clicking the 'Revert to saved' link.
I have posted the same information, but with screenshots, to http://oraclebi.blogspot.com/2005/12/pdf-settings-in-viewer.html
Thanks
Abhinav
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
Discoverer: http://www.oracle.com/technology/products/discoverer/
BI Beans: http://www.oracle.com/technology/products/bib/
BI Software: http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples: http://www.oracle.com/technology/products/bi/samples/
OTN Forum: Discoverer
Blog: http://oraclebi.blogspot.com/

How to add a page in the SAP Scripts

Hi All,
I want to know how to add a page in the sap scripts. there is already sap script developed by some other person.
Now I have to add a page in front of that and have to add some more data.I added a page in page windows but thats not at all working.
Please help me out in this.
Thanks,
Praveen

new page will create in sap scripts using new page command.
you have to set condition like after some number of records displayed in page new page has to be trigger.
ex:YOU HAVE SO MANY RECORDS FOR PRINTING BUT YOU WANT TO DISPLAY 100 RECORDS IN FIRST PAGE REMAINING IN SECOND PAGE LIKE THAT.
Here you can use NEW PAGE COMMAND .
IT IS OPPOSITE PURPOSE OF PROTECT AND ENDPOTECT.
Reward if useful.

How to change page settings trying to print 4 photos in 8/11 sheet

Using my I pad wirelessly to hp envy 4500, I don't have the option to change my page settings, any help

Hello Julianoadel,
Welcome to the HP Support Forums!
I see that you are looking to print four pictures onto a 8.5x11 page from your iPad to the ENVY 4500. When printing with an iPad you have very little options to change / adjust when printing, this is caused buy the limitation of AirPrint.
I do now know if this will give you the option to print the four pictures on one page, but it will provide more features and settings for printing, install and use HP ePrint App on the iPad.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How to put Page break in SAP Script

Hi Experts,
Please tell me how to put page break in SAP Script. or give some sample code
looking forward for your reply..
Regards,
Kali Pramod

Hi,
NEW-PAGE is used to insert a page break ,
it can be conditional if used between IF..ENDIF
e.g. /:IF &KNA1-NAME1& = 'XYZname'
/:NEW-PAGE
/:ENDIF
If u want to Page break after displaying certain records or after some condition you use NEW-PAGE
reward if useful.

Acrobat 9 Pro PDF is not retaining original page settings from Word doc

The document I am trying to put into PDF format (from Word 2000, using Acrobat 9 Pro (trial version)) drops my original Word page settings (5.5" x 8.5") and defaults to 8.5" x 11" in the PDF. Using "Crop Pages" does not remedy the situation - the doc just stays at the larger size in Acrobat/PDF. Can anyone tell me what I might be doing wrong?

Change the paper size in the printer properties before creating the PDF. This is the same as putting the proper paper in a physical printer.

Need to add a new page in the SAP Script as last page

Hello,
I need to add a new page in the SAP Script as last page.
Currently I have three pages in the form(FIRST,NEXT,LAST). For this I created one more page END.
FIRST page next page is NEXT
NEXT page next page is NEXT
LAST page next page is LAST
END page next page is END.
I used NEW-PAGE END in the main window but it is not working and also I trired with CONTROL_FORM this also not working.
Thanks,
Ravi.

Hello,
I need to add a new page in the SAP Script as last page.
Currently I have three pages in the form(FIRST,NEXT,LAST). For this I created one more page END.
FIRST page next page is NEXT
NEXT page next page is NEXT
LAST page next page is LAST
END page next page is END.
Create the text element in the main wondow of your form
/E           ENDPAGE
/:           NEW-PAGE END
and call the element from your print program by using write_form, where you want the END page in your print.
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      element = 'ENDPAGE'
    EXCEPTIONS
      element = 1
      window = 2.
Thanks,
Ravi.

KDE pager settings resets on every boot

For some strange reason (after yesterday's KDE update) the Pager Settings gets reset every time I reboot my system to "Desktop 1", "Desktop 2", etc.... VERY ANNOYING
I've even deleted the .kde4 folder but to no avail ... it does the same thing !!
Does anyone else have the same problem? It this a bug?
Is there a way to edit some file to make it stick?
Thanks.
R.
Last edited by ralvez (2011-05-10 12:44:12)

OK. Today I updated another system in my office and has the same problem; upon reboot the pager sets itself to "Desktop 1", "Desktop 2" ...
I'm inclined to think,now, that this is a bug.
Any one out there with some ideas to work around the problem?
R.
Last edited by ralvez (2011-05-10 12:44:44)

Function module converts sy-datum to date according to user settings in SAP

Hi experts,
I need such a function module which converts sy-datum to a date format
according to user settings in SAP.
Thanks,
Yogesh

Use these function modules.
CONVERSION_EXIT_PDATE_OUTPUT
CONVERT_DATE_TO_EXTERNAL
Please mark points if the solution was useful.
Regards,
Manoj

Printed page smaller than page settings

Hi. Not sure if anyone's got experience with this, but for some reason in Office 2008, Word seems to have reduced the size of the page layout settings by about 30%. In other words, with page layout set to A4 sized paper, the print preview and actual printed page both act as if the print area is smaller than the actual page. The font is reduced, the space between lines, everything. So, although the font is set to 12 point, it comes out much smaller. I've checked page settings on both the printer and Word preferences (both are set to A4), updated the printer driver, and everything else I can think of. When I go back to my previous version of Word, no problem. Can anyone comment? Thanks.

Have you checked the default setup in like TextEdit under Page Setup, or made a new Default Page Size?

Adding additional pages to the universal driver's special pages settings

Hi.
Ok I have a 3 tray HP laserjet 4050 printer that we use for printing works orders.
I have it set up so that page 1 will print from say tray 3 and then page 2 will print from tray 1 etc but I really need to beable to get the printer to print pages 3 and 4 from a different tray also.
I am using the HP universal 5.5 driver as the 4050 does not support special page printing. Problem is the Special Page settings (through driver 5.5)only seem to support first and second page printing.
Is there a way to get it to add a 3rd and 4th page to this section?
this issue is now becoming a serious problem for me work wise.

He is using the blog template to create a blog.
The photo on the main page has been highlighted and then selected as a link to the "entry".
Select "iWeb help" form the "help" drop down menu and you will find information about making a blog.
Then go to the section on "working with text and adding links".
If you are really new to this I would recommend you watch the video tutorials that can be accessed from the iWeb "help" menu.

Saving 1 page changes another page settings

I know that there is an easy solution to my issue. I have a copy of a website that I wanted to duplicate its features.
I have a copy of another website (A) locally that I want to copy. In CS4, I defined a new site, opened a document which I named index. Then I opened a page from site A, copied all the “Style and Layout” settings as well as the code from site A page to my index page. I displayed correctly and I went about changing stuff and once done, I saved the index page with success. Looks good with my changes and I’m happy.
I then created page 2 for my site, and opened a 2nd page from site A that I wanted to create my second page equal too, copied all the above files from 2nd page of site A to my second page for my site. I made all the changes to my page and saved page 2 for my sight.
However, when I opened my index page, my 1st page, the settings that I saved from the 2nd page that I created, changed the settings to my 1st page.
Now, I know that is directly associated with the style and layout css, but, how do I go about saving a page settings without affecting another page settings successfully? I figure it’s a easy step, but, I’m not in the mood after many hours of work.
Thanks for your help if you know the solution to my issue.

All work is local.
OK.
Unfortunately you'll have to make do with the hit-and-miss guesswork already evident in this thread.

How to make language settings in sap crm

i want to make LANGUAGE settings in sap crm..for ex: my client want Hindi as
as a language in his dropdown list..pls let me know asap..
thanks and regards,
SAPCRM

Hi,
When you log into CRM system you have option of specifying the language.
But for the same, you need to consult SAP to get the language code and the text repository.
Install the language repository.
Please contact your Basis consultant for the same.
Best Regards,
Pratik Patel
<b>
Reward with Points!</b>

Pager Settings in sap

Similar Messages

Maybe you are looking for