Pages '09 and an Epson RX580 printer

I just made the jump to an IMac. I have run into an issue with printing envelopes with my Epson RX580 printer. I downloaded and installed the newest drivers that are available for Leopard from the Epson site for this printer. When I try to print envelopes, either an imported Word doc or one that I created from a template I have 2 problems. The envelope looks fine on the screen but when I print it the first issue is that it has to be rotated 180 degrees from what the printer manual says and my experience with MS Word is. Second of all, the left side of the return address is truncated and it prints lower on the envelope than expected. I have not changed any of the default setting for Pages. I did try playing around with margin settings. I eventually fixed the truncation but the envelope looked bad - text was too far to the right and too low.
If this has been answered, I missed it an do apologize.
Thanks,
Jeff

Sorry, I was away for a couple of days. When I start from a scratch and use an envelope emplate, I am assuming that the margins are being set by the template. When I view the image on the screen it looks correct. When I print the envelope its off by a little (ok enough to be annoying) not by a lot. If I go to inspector/page set up the page attribute setting is #10 envelope (4 1/8 x 9 1/2) which is the correct size for the envelope. Am I missing something?
Thanks,
Jeff

Similar Messages

  • Ihave an ipad and an epson nx430 printer.  I tried to print my airline itinerary  and it printer 4 pages that was mostly ads.  How can i print just the itinerary which fits on oneage?

    I have an ipad2 and an epson nx430 printer.  I tried to print my airline itinerary  and it printer 4 pages ,most ofwhich were ads. How can i focus just on the information that i need?

    Does the website you're using offer a "printer freindly" button or perhaps the faciltiy to email the intenerary to yourself?
    Matt

  • Adding an Epson RX580 printer

    Just got a Mac mini, I had an a PC and the Epson RX580 worked great with it. I set up the Mac mini and it shows it in the printer list but won't let me add it as a printer. I've gone to Epsons website to get the latest mac software down load. It allowed me to finally print but only on a small row on the left side of the paper. Can anyone point me in the right direction of what needs to be done?

    Teknogroovin-
    My guess is that nobody had a good answer for you.
    So what was the solution?
    Luck-
    -DaddyPaycheck

  • Trying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.

    rying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.
    Does anyone know how to fix this?

    What EXACT version of Photoshop CS4 are you running?  You should be on Photoshop CS4 v 11.0.2.
    Also run Apple's software update to see whether it offers you the latest Epson update:
    Printer Driver v9.33
    Epson Stylus Pro 3880, Drivers & Downloads - Technical Support - Epson America, Inc.
    MOST IMPORTANTLY:  have Photoshop re-create its own Preferences:
    To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
    Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.
    Important: If you re-create the preferences by manually deleting the Adobe Photoshop CS6 Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
    Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
    NEW Video! Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here:
    How to Reset Photoshop CS6’s Preferences File | The Complete Picture with Julieanne Kost | Adobe TV
    Mac OS
    Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If  you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

  • How do I get good quality prints using AE and an Epson SPR800 printer

    I need to print best quality A4 colour prints for a friend.
    My Macbook is connected wirelessly to the home network and prints documents usually on the Epson with no problems.
    My questions are:
    1. What settings should I use from Aperture to get the best quality print?
    2. Should I print from Photoshop CS3 or Elements 6 to give a better print and if so what settings should I select.
    3. I have read all about ICC profiles for the printer and paper and have downloaded the latest from the Epson web site and installed but are these being used when I print using the AE. I ask as I seem to remember in the past that to print over the network the settings on the Macbook were saying I had an an Apple Laserwriter P/S driver and not the Epson R800 driver.
    4. Would I be better to connect directly via USB to the Macbook?
    Any advice greatly appreciated.

    Hi, I am also interested in the answer to your question and likewise I am wading through lots of threads with no answers...
    I did come across something that recommended importing straight from iDVD rather than using iMovie to send to iDVD ... something to do with it being encoded twice? Also people seem to think that iMovie HD creates higher quality mpegs compared to iMovie 8.
    But would be good to find a definitive FAQ about all this. There is this site but it is out of date: http://www.danslagle.com/mac/iMovie/index.shtml.

  • Mountain Lion and an Epson R3000 printer

    I'm rapidly going nuts - and I'd cheerfully throw them at Epson.
    I have made endless inquiries of Epson's support desk, asking them to confirm what version of of the R3000 printer driver is meant to be installed with 10.8 (my installed Epson driver shows v9.0).  They insist that it is v8.44. But that is not what Mountain Lion installs and it is not what Apple support documents describe as being the current driver - both the Mountain Lion installer and the Apple support docs show it to be v9.0.
    Nor can I manually install Epson's v8.44. The installer appears to go through the process, but fails to install and the driver remains as v9.0. That's not entirely surprising, because more often than not you can't simply install an older version over a newer one.
    Epson are really being quite unhepful. They simply keep refering me to Apple support documents which clearly contradict everything Epson is suggesting.
    Can anyone confirm for me what version of the Epson driver ahould be installed in the Mountain Lion OS - and is it functioning correctly? And if by chance it should be v8.44, what's the trick to installing that version in Mountain Lion?

    The driver for your printer is 9.0. I don't recommend to install an older version because it's for an older OS X and it couldn't be supported in 10.8

  • I am having trouble printing multi-page documents on my Epson printer. 13" Macbook Pro, Adobe InDesign, Epson WF-7520

    I have a multi-page document and I want to print some of the pages, double-sided, to check my work. I can't seem to get the interface to recognise that I want to print a specific range of pages, so it will print just one page [no double-sided] or, I assume, it will print the WHOLE LOT [not good at this stage!] HEEEELLLLPPP!! 
    To explain, the dialogue box which opens when you hit Command+P has an option of 'Pages' or 'Range' but 'Range' gives you only two options:  All Pages or A4V. If I click the 'Printer' button I get another dialogue box with more options and from there I can choose to print 'All' or 'Pages' . . . and you change 1 to 1 to say, 1 to 3 for example. There is also an option to print double-sided. But nothing seems to be working and as soon as you finish with this second dialogue box it seems to forget every parameter you choose there. The summary page on the first dialogue box also seems suspiciously sketchy on details of what, exactly, it is about to print. By the way I have installed the latest driver set from Apple for this printer. Is anyone else having the same problem?

    Thank you so much Eric. I did what you said. I still had the same result, but finally [somehow] I ended up clicking on something which doesn't even look clickable - this is a tiny set of back- and forward arrows in the 'Range' option. Using this feature seems pretty hit-and-miss but I persevered and was able to get it to accept my parameters, i.e. "1 - 2" in range. You have to go into the second ["Printer"] dialogue box each and every time you print, to enable two-sided printing. At last I was able to get it to print pages 1 and 2 of my three-page document. Now maybe I can test-print pages from my 108 page tome! Fingers crossed . . .   

  • After upgrading to 10.3.9, Epson R340 printer won't install

    I was happily using both an Epson C84 and an Epson R340 printer on my old red iMAC on OS 10.2.X. I upgraded to OS10.3.9. The C84 prints properly. The R340 doesn't. When I tried making a photo, I got a "Communication Error" message and found that the Printer was not in the Printer List. I reinstalled the printer driver, both from the latest downloadable version, and from the CD that came with the computer. After getting the "Searching for drivers" message, when the tool bar is set to Epson USB nothing appears. When the tool bar is set to USB, I get a message that the R340 driver is not installed. Curiously, the Epson Printer Utility recognizes the R340 and will perform a nozzle check and print out the sample.
    I have tried uninstalling the driver first, have repaired permissions and the hardrive, rebooted a million times, swapping the USB cords between the C84 and the R340, all to no avail. Any suggestions. Many thanks!!

    I would navigate to Mac OS X disk/Library/Printers/EPSON/ and trash the driver(s) that are there for the R340. Disconnect the R340 from the computer and then download and install only the driver from the EPSON site since the one on the CD might be obsolete. Repair Disk Permissions and restart the computer. Attach the R340 and see if Printer Setup Utility sees it.

  • HT4356 I'm using my iPod and an Epson XP-810 printer to print pages from websites and emails and etc.  How do I print just 1 page out of 14 pages .  I don't see any settings on my iPod and can't find settings on the printer .   Can someone help with this

    I'm using my iPod and an Epson XP-810 printer to print pages from websites and emails and etc. 
    How do I print just 1 page out of 14 pages . 
    I don't see any settings on my iPod and can't find settings on the printer .  
    Can someone help with this problem

    Google show that you have to cut what you want to print and then paste it into a new app and print from that app.
    http://www.ipadforums.net/new-member-introductions-site-assistance/63145-printin g-one-page-ipad-2-a.html

  • I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. There are no page sizes, paper types, appearsto be locked on a 13x19 size but It.

    Hi to the Mac Folks,
    I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. This is regardless of either printer selected.
    I primarily print photos from Photoshop CS5.  The term Page Set-up has gone missing in the file pull down menu. Can't make any choices  There are no page sizes, paper types, appearsto be locked on a 13x19 size paper format. Either being too large or too small.
    Saw a 2008 locked issue about this however none of the help fit my situation, options discussed are not available to me.
    Preview has no "Page Setup" - or does it?
    Does the constant struggle with computer compatability weirdness issues ever end or is it a enslavement scheme?
    Woody

    Hey,
    if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders.  You can then navigate all the contents as normal.
    HTH,
    S.

  • Print quality with Aperture and Epson RX580

    Hi all,
    I feel like I've tried everything, but I just can't get Aperture (the latest version with all the updates) to print from my MacBook Pro on my Epson photo printer the way I could from other photo software on my old PCs.  On my old PCs, when I would print a photo from Canon DPP or Capture One, or even the Windows photo management software, I get a rich menu of dialogue boxes for the Epson printer offering different qualities of prints, different papers to choose from, "photo enhancement," and lots of other options.  Prints came out sharp, colorful, and just great.
    When I print from Aperture, I get none of these options (I get color management and resolution, and that's about it).
    When I print from Aperture, I get vertical lines in the prints, visible dots, and pixellation.  So what I do is email the "exported" versions to my daughter's PC laptop and print from there -- and get good results.  Boy, that's a pain.
    Surely Aperture can do better than this.  So what am I missing?  Any ideas for what I should be doing?
    Thank you.

    Canon MP990 and Macbook pro (os X snow lep.. and Lion) - Lines in prints in Aperture.
    While a bit vague I got there and found the distinction between the printer driver managing it and the printer managing the photo quality causing the issues. 
    I could only transfer the pic's to iphoto and print for ( admitedly about the same time of more than a year).
    The FIX
    in the first window after selecting print scroll down to rendering and select printer managed.
    Select all the other settings you need then select print on the right bottom of this window.
    This next dialogue box at the bottom is a show details button then a new set of menus are present (initial is layout in a pull down menu)  select color matching then automatic ( you can change this but it worked so if it is not broken I'll play later ).
    You should have clear prints with no lines...

  • Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from l

    Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?

    In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.

  • Epson Artisan 810 issues - can scan and communicate but not print!

    I just purchased a new Macbook Pro (13") - my first ever Mac - and am trying to get it to print with my Epson Artisan 810. Like many others I am having problems but none of the posted solutions work for me.
    I installed it fresh initially with the drivers from the Epson website, I selected the Bonjour option, I was even able to download whatever update was out there through the Software Update feature, but still the same issue. The printer scans w/o a problem, it can tell me the ink levels and access the maintenance page w/o problems, but cannot print.
    Whenever I print SOME message must make it to the printer because as soon as I hit print the printer starts making noise as if it is going to load paper and print, but then almost immediately it cancels the print. The printer log ALWAYS give the same error no matter what document or program I try to print from:
    Error: /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpll.app/Contents/MacOS /rastertoescpll failed
    I have tried uninstalling and reinstalling the printer over and over and I keep getting this same error and immediate print job cancellation. What the heck is the problem here?

    John, I deleted the printer and deleted those folders and reinstalled the printer using the printer menu. When I tried the apple software update it said my software was up to date and didn't offer an option to get updated print drivers. I tried printing again and the same thing happened.
    Syd,
    I am trying to print from the Macbook to the Artisan entirely over a wireless network. The Macbook has not been plugged directly into the printer or to the router at any point in this. I did try what you suggested, resetting the printing system, and as earlier it did not offer any software updates when I looked for one. I tried printing again and the same result.
    I dug around some more directories and found some more files with the epson name in there and deleted those and then attempted to reinstall using the printer setup page, and then again tried a software update and again it didn't find any new drivers, and of course the same printing error occurred again.
    It sure appears that the MacOS is holding onto drivers somewhere that I cannot discover because when I reinstall the printer it takes it all of 3-4 seconds to install, and when I try to do the software update it is not finding any new drivers anywhere.
    Syd, I agree that there seems to be something specifically corrupted about the printer driver itself, however, but is there another way to remove drivers?
    Should I try uninstalling everything and attempting a USB installation to see if prints that way?

  • Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened an

    Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."  Even after closing and reopening the program, the print command is greyed out so I cannot select any printer. This also happens with a Brother laser printer. Both printers will produce a test page out side of the Adobe product. Help!

    I cannot get any help either.  I get the message "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."  I have reinstalled all drivers, powered off/on all printers (2 of them - a Brother HL - 4040cn and an Epson Stylus Pro 7890 - which all worked fine until this morning).  There appears to be no path to a solution.  I have read all the forums and tried about 20 different suggestions all to no avail.  Reboots, changing cables, reinstalling printers and drivers and Photoshop CS6 - ALL TO NO AVAIL.  On a macbook pro retina with 10.10.3.  This issue is out there and some get solutions - but not all - that's my crowd...the not all crowd.  I have yet to be able to print from CS6 any more.  This is a show stopper and my patience is wearing thin.  And I'm tired of stupid questions like "is your printer powered on?" give me a break.  This appears to be an adobe photoshop cs6 problem - as I can print from every other application.  Anyone have any ideas?  Adobe should have something?... Adobe system  info below:
    Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
    Operating System: Mac OS 10.10.3
    System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 2300 MHz
    Built-in memory: 8192 MB
    Free memory: 4665 MB
    Memory available to Photoshop: 7059 MB
    Memory used by Photoshop: 70 %
    Image tile size: 1024K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
    OpenCL Version:
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
    Display: 2
    Display Depth:= 32
    Display Bounds:=  top: 1072, left: 140, bottom: 1950, right: 1580
    Video Renderer ID: 16918311
    Video Card Memory: 1024 MB
    Video Rect Texture Size: 16384
    OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
    OpenCL Version: 1.2 (Feb 27 2015 01:29:10)
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
    Display: 1
    Main Display
    Display Depth:= 32
    Display Bounds:=  top: 0, left: 0, bottom: 1050, right: 1680
    Video Renderer ID: 16918311
    Video Card Memory: 1024 MB
    Video Rect Texture Size: 16384
    Serial number: 92629107631240972642
    Application folder: KerrysHD:Applications:Adobe Photoshop CS6:
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      KerrysHD, 232.6G, 19.7G free
    Required Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
    Primary Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Plug-ins:
    Additional Plug-ins folder: not set
    Installed components:
       adbeape.framework   adbeape   3.3.8.19346   66.1025012
       AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
       adobe_caps.framework   adobe_caps   6.0.29.0   1.276181
       AdobeACE.framework   AdobeACE   2.19.18.19243   66.492997
       AdobeAGM.framework   AdobeAGM   4.26.17.19243   66.492997
       AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
       AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
       AdobeBIB.framework   AdobeBIB   1.2.02.19243   66.492997
       AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.492997
       AdobeCoolType.framework   AdobeCoolType   5.10.31.19243   66.492997
       AdobeCrashReporter.framework.framework   AdobeCrashReporter   6.0.20120201  
       AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
       AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
       AdobeLinguistic.framework      17206  
       AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
       AdobeOwl.framework   AdobeOwl   4.0.93   66.496052
       AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
       AdobePDFSettings.framework   AdobePDFSettings   1.4  
       AdobePIP.framework   AdobePIP   6.0.0.1654  
       AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
       AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
       AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
       AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
       AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
       ahclient.framework   ahclient   1.7.0.56  
       aif_core.framework   AdobeAIF   3.0.00   62.490293
       aif_ocl.framework   AdobeAIF   3.0.00   62.490293
       aif_ogl.framework   AdobeAIF   3.0.00   62.490293
       AlignmentLib.framework   xcode   1.0.0.1  
       amtlib.framework   amtlib   6.0.0.75  
       boost_date_time.framework   boost_date_time   6.0.0.0  
       boost_signals.framework   boost_signals   6.0.0.0  
       boost_system.framework   boost_system   6.0.0.0  
       boost_threads.framework   boost_threads   6.0.0.0  
       Cg.framework   NVIDIA Cg     
       CIT.framework   CIT   2.0.5.19287   145486
       data_flow.framework   AdobeAIF   3.0.00   62.490293
       dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0  
       dvacore.framework   dvacore   6.0.0.0  
       dvamarshal.framework   dvamarshal   6.0.0.0  
       dvamediatypes.framework   dvamediatypes   6.0.0.0  
       dvaplayer.framework   dvaplayer   6.0.0.0  
       dvatransport.framework   dvatransport   6.0.0.0  
       dvaunittesting.framework   dvaunittesting   6.0.0.0  
       dynamiclink.framework   dynamiclink   6.0.0.0  
       FileInfo.framework   FileInfo   66.145433   66.145433
       filter_graph.framework   AdobeAIF   3.0.00   62.490293
       hydra_filters.framework   AdobeAIF   3.0.00   62.490293
       ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
       ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
       image_compiler.framework   AdobeAIF   3.0.00   62.490293
       image_flow.framework   AdobeAIF   3.0.00   62.490293
       image_runtime.framework   AdobeAIF   3.0.00   62.490293
       LogSession.framework   LogSession   2.1.2.1652  
       mediacoreif.framework   mediacoreif   6.0.0.0  
       PlugPlug.framework   PlugPlug   3.0.0.383  
       UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
       wrservices.framework        
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

  • Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?

    Seeking help with PS Elements 11 which does not work with Epson r2000 printer.  Epson tech support could not fix, said it is PS e11 problem.  Receive prompt on PS e11 screen when I try to print stating "not compatible or settings are not correct.  Have set PS to manage color and printer manages color to off.  Would appreciate any suggestions.  Thank you.

    Hi,
    Sincerely appreciate your help.  Running Windows 7 on a  Dell XPS420.  System has been very stable for years.  Before purchasing the Epson r2000, I owned an r1800 which was an excellent printer but after seven years started to exhibit paper feed problems.  The r1800 worked with all applications and I was well satisfied with the saturation, contrast, etc. printing mostly 8x10 and 11x17 prints. 
    Thank you for the information about the # of installs for PS E11, will try uninstall/reinstall this morning.
    Will let you know how things go.
    Richard
    Date: Thu, 12 Sep 2013 19:47:38 -0700
    From: [email protected]
    To: [email protected]
    Subject: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
        Re: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
        created by Barbara B. in Photoshop Elements - View the full discussion
    What operating system are you using?
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5678022#5678022
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5678022#5678022
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5678022#5678022. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for