Pages 4.2 Not Working after 10.8.2 ML update

Since updating to the iOS 6 compatibility firmware for Mountain Lion (10.8.2) Pages for me does not work at all. It just jumps up and down until it stops. Then I have to click force quit to actually close the application. I sent the report to Apple.
I have resorted to buying Microsoft Office 2011 ediiton (the contridiction of why I actually bought Pages) I couldn't wait. I'm in university and need a word processor.
Please don't tell me I'm the only one having this issue...

Haven't you posted this question already?
What "iOS6 compatibility firmware"? iOS6 has nothing to do with the Mac.
You don't need to buy MsOffice to get a Word Processor, there are plenty of perfectly good WPs out there, many for free. Even TextEdit opens and saves to Word .doc files.
btw I just upgraded an external hard drive to run Mountain Lion OSX 10.8.2 and Pages 4.2 is running perfectly, so you have another issue but haven't given us any details that would help narrow down what that could be.
Have you by any chance reinstalled Pages from a Time Machine backup? Because that doesn't work.
Peter

Similar Messages

Chat not working after nokia C3-01 software update...

Chat not working after nokia C3-01 software update from 5.65 to nokia 6.00

when is there's gonna this be fixed it has been more than a month
satisfaction level is decreasing with the product

Facetime, iMessage, and Mail not working after iOS 6.1.3 update

I've had my iPod touch 4th generation since Oct 2010 and never updated the iOS until very recently. Before the update, Facetime worked consistently and easily. After I finally got around to updating my iOS a week ago, my iPod has come into severe issues.
99% of the time, I cannot send or receive Facetime calls. If I try to make a call, it doesn't make the dial tone and eventually it just says "Connection Lost". Nothing happens if someone is trying to send me a call. I only Facetime with my boyfriend and his iPod hasn't changed since Facetime was last working. HIs other iPod is also updated with iOS 6.1.3.
I never used iMessage before the iOS update, but because it says on Apple support that it uses push notifications like Facetime does, so I tried it. Most of the time, I cannot send or receive messages. I rarely used Mail before the update, but I never had a problem with it. Now, when I enter my gmail password, it keeps saying my username and password are not correct, even though I haven't changed my credentials.
I only use my iPod for Facetime, iTunes, and Pandora. I don't need iMessage or Mail, but I am testing with those to see if this can help find the root cause of the problem. Pandora works smoothly so I know it's not a wifi connection issue. I have searched for remedies on end and tried:
1. Reset, turn off/restart, turn Facetime on and off, etc.
2. Changing the DNS server address to 8.8.8.8, which made Facetime work normally for one time and never again
3. Updating my Apple ID password online, then signing out and signing back in
4. Creating another Apple ID with my other gmail account. Maybe 1 out of 10 Facetime call attempts, I can generate the dial tone, but when my boyfriend clicks to receive the call, it says that I am unavailable. iMessage has about the same success rate. It seems when I miraculously can send or receive texts through iMessage, I can manage to get the dial tone when I try Facetime, though the call cannot go through.
This is of course extremely frustrating and I highly regret the update now. I was hoping for an improved iPod after the update, and now I have a near-dud! I did make sure to check my location and date and time, and both are correct (US, Central time). Any help would be greatly appreciated. Thank you.

I spoke too soon. I tried Facetime again last night and had the same problems. Another factory reset did not work. I think it may be time to just call Apple support.

Earbuds with Mic and Skip Functions not working after IOS 6.0.1 update?

I have earbuds with a mic and skip buttons functions and noticed that mic and the skip music functions stop working after updating to IOS 6.0.1. Now when I talk on the phone the mic on iPhone itself is working and not the mic on my earbuds. Also when playing music he skip functions has stop working. Has anyone noticed these problems?

Phone restart > if that doesn't work then do a reset of the settings. Full restore would be the last option.

Lighting cables and adapters are not working after the last iOS 7 update.

Looking for some help from Apple here. After the last iOS 7 update, some of my lightning cables and adapters have stopped working.
I have an iPhone 5 funning iOS 7.0.2.
I have a car charger/FM RF transmitter that has worked like a charm for years. Because none of these have been made with a lighting connector, I've had a genuine Apple adapter on it since I bought my iPhone 5 a year ago. Never had a problem until the last iOS update. Now when I plug it in, not connection is registered. I've verified the charger is working by removing the adapter and plugging the old iPhone connecting into an iPhone 4 running iOS 6. I've also verified the adapter is working by plugging the charger with adapter into an iPad mini running iOS 6.
I also have a Belkin USB car charger. This came with a black lighting cable. Also worked like a charm until the last update. Now, half the file when I plug it in, no conncetion is registered. The other half of the time, it says this cable is not supported but does not connect my phone or charge it. I've also verified that the cable is working by plugging it into an iPad mini running iOS 6.

I had the same bug. Powering off the phone and back on resolved the issue

Links to shortcuts not working after applying 8.2.4 update

After the 8.2.4 update was installed on my Vista computer, I can’t invoke links in my PDFs that specify an UNC\\pathname\shortcut.lnk. The hyperlink was originally created in Microsoft Office 2007. The file was then converted to PDF using the Adobe Acrobat add-in “Create PDF”. The error I’m getting is something like “Windows cannot find ‘shortcut.lnk’ could not open file ‘/UNC/pathname/shortcut.lnk’. Please note that these links work as expected on 8.2.3 and lower. Were new registry keys added? Was a bug introduced into the update? I’m lost…

A lot of people have been reporting broken links with the latest update, and it appears to be a bug that Adobe is reported to be working on.

Port Forwarding not working after 7.7.1 Firmware update

I bought the new 6th generation Airport Extreme today, and after I set it up, everything worked great. I have a VoIP phone that needs to have traffic on port 5060 forwarded to it, and that worked just fine as well.
However, I then updated to the 7.7.1 firmware, and the port forwarding stopped working. I tried a hard reset of the Airport and re-entered all the settings, but it still didn't work. I spent about 30 minutes on the phone with 2 Apple support people who tried hard, but couldn't help. They also couldn't find a way to download the 7.7 firmware, so there was no way to downgrade. They suggested I go back to the store and exchange it for another one, which I did, and now it all works again.
Has anyone else had issues with port forwarding on 7.7.1? I'm just wondering how I'll ever be able to update the firmware, since failure means having to get a new Airport.

Huh,
turns out the problem went away with another restart of the Mac Mini. I'm still uneasy about it though, as I do not understand how it went from working to not-working over night in the first place. But, at least for now, the problem seems gone.
Thanks for commenting.
Cheers
Niels Olof

Sound not working after 10.9.4 Mavericks Update - HELP!

My sound does not seem to be working following the latest update to Mavericks (10.9.4). I am running a 2012 Retina Macbook Pro. Sound does not work with speakers, headphones or built-in sounds. Before anyone asks, no its not on mute, I have checked the Audio Midi setup and Sound settings and everything is as they were prior to the update, so the sound should still be working.
I have tried resetting the SMC and PRAM, no luck yet. Also tried re-installing the update but did not work.
Any help is greatly appreciated!

So I had the same problem; Actually other problems occurred after upgrade 10.9.2 (Thunderbolt related issues) and now after upgrading to 10.9.4 my internal sound disappeared.
The solutions described above made it worse; Sorry sykosoft .. but your solutions is even dangerous ;
I spend almost a Day finding out how to restore my internal audio devices ..
So what I discovered, this is a software issue;
Update on update on update without any clean install resulted in some filty .plist files
com.apple.audio.DevicesSettings.plist
com.apple.audio.SystemSettings.plist
looking in those files I discovered some settings pointing towards RabbitEars .. perhaps I tried it once in a previous life but now I do believe the upgrade took by incident the wrong 'device' as standard ..
So I looked up and the only thing I could do was finding .kext and other related stuff .. only able to remove it commando wise = terminal
after rebooting for the 722th time performing a SMC and PRAM for the 666th time the result was ... NO STANDARD devices detected
THe only solution working is :
A recovery install;
https://www.apple.com/osx/recovery/
In my case I encountered a problem; My recovery failed (reboot press and hold CMD+R, selecting install fresh OS X)
I find out it was due to my FileVault encrypted HD; So first I uncrypted (switched off FileVault) my HD, and even created a USB recovery disk (not needed)
Tadaaaa 45 minutes later all problems solved, without loosing data or reinstalling all programs ..
*feeling relieved* I thought sharing my pain and solution would save you hours finding out how to repair, hoping PRAM and SMC reset would solve it ..

GE60 0NC-006US Webcam not working after Win8 upgrade or BIOS update

So, I upgraded my GE60 to Windows 8 a couple of weeks back and decided to install Skype this past weekend. Upon opening Skype, I was told that no webcam could be found. I checked Device Manager and sure enough, no instance of a webcam or driverless device was detected. Now, I did apply the newest BIOS just before upgrading so I assume that could have broken it as well. I followed the BIOS directions given by the instructions provided on the driver page and everything else works. Furthermore, Live Update says I have the most current version. I am wondering what to do next. Should I reapply the BIOS or how can I find out if the laptop even detects the webcam? I mean, not being in Device Manager and even the Devices window, reverting back to 7 probably wouldn't help since Device Manager shows no instance, correct?

Quote from: Svet on 12-September-12, 23:16:19
yes update EC too, and do ec reset when its done:
https://forum-en.msi.com/faq/article/how-to-reset-the-ec-embedded-controller
Thank you Svet for all of your help. I relayed my issue/resolution here at work and they're all getting a luagh out of it.

Mac mail not working after OS 10.9.5 update

I have the same problem as other users.
Since last update of the OS to 10.9.5, the MAIL app does not send email.
It just does a few times a day, on and off.
I tried to take all accounts offline and then take all accounts online again, so many times, does not work.
I tried to reboot; does not work.
I tried deleting my accounts and creating them again, does not work.
I started to like that app, makes me sad to see how bad it got this week.
Does anyone know what is going on??
MacBook Air, OS X Mavericks (10.9.5)
HELP!
Re: Mail app drives me crazy, does not sync since last update 10.9.5

On and Off, that's the reason I am 100% convinced it is a software update issue.
It seems that Mail does not connect to servers as it used to.
Sometimes it would work great for a while, and turn back down again for no reason.
Apple will not read those comments as it is a place for mac users only. The only thing we can do is send 1 email per day, that's what i am doing, to "Provide Mail Feedback" in Mail on the bar to complain so they hear about the problem and try to solve it.
Any mac user of the community could help, apart from saying just do not use this app anymore?

Black ink not working after my computer did an update (2 new cartridges put in)

Black ink stopped working suddenly. Tried 2 new cartridges and they did not work. Since the day before their was an automatic 'updates' on my computer I thought it was that, but making copies doesn't work either. I already cleaned the print heads with still not even a hint of black ink coming out.
Usually, when the ink gets low it will be light at first or streaky . . . not just none at all. Could the update been a problem?

The update is likely not related. I would suggest going through the troubleshooting steps in the document here. Be sure especially to check the vents as shown in solution six. If the steps there do not resolve the issue soaking the printhead as shown in the post here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

USB ports not working after OSX 10.9.1 update

I have a late 2011 MBA 13".
The 2 USB ports stopped working as soon as I updated to 10.9.1.
I tried zapping PRAM and resetting the SMC.
I even turned the thing off for hours and still nothing.
Any idea how to fix?
Everything was fine until I did the update.
Thanks.

This is not a known bug affecting 2011 MBA computers with 10.9.1 so there is something wrong with your installation. Since zapping PRAM and resetting the SMC did not work I suggest that you try one of two things but first make sure you have backed up your computer.
1) download Mavericks and reinstall it. Sometimes an update goes awry and a reinstall fixes it. Since doing this won't disturb any of your data or applications it would be my first choice. You'll be downloading 10.9.1 so you won't have to perform any updates.
2) boot into the recovery mode, erase the hard drive and then download and install Mavericks. Once Mavericks is finished installing you'll be asked if you'd like to migrate data and applications from a backup. Say yes and if your backup drive isn't already connect it, do so. Select your applications folder and account folders from the list and let the Setup Manager do its magic.
BTW - this is why one of my several backup hard drives is a cloned backup using Carbon Copy Cloner (SuperDuper! Is another good choice). I can boot up my computer using this backup and download the newest version of Mavericks on it if I haven't already done so. I always quit the installer first and make a copy of it because the installer program deletes itself once it is finished which is something of a pain. It gives me more options including being able to boot my computer with it, erase the computer and copy the installer to the computer rather than having to perform the download all over again if step 1 fails. Since I always download a new copy of the OS when Apple releases an update this computer will have the newest version of the installer so I also can skip the download step of option 1 and just copy it over and install on the computer.

Dreamweaver CS5 ftp does not work after my host server was updated

I'm on an iMac running Mavericks.
I'm using Dreamweaver CS 5.5 from the creative suite.
Suddenly the FTP function in Dreamweaver does not work.
My website host stated that they were forced to upgrade their server software for FTP and the Dreamweaver was not compatible.
Will there be an upgrade soon to resolve the problem? I'm having to use Filezilla to upload/download files from my site and it's a real pain compared to just using Dreamweaver.
Please help ASAP! Thanks.
Marcus

DWCS5.5 hasn't received an update in years and is no longer supported by Adobe. The chances of there being an update for any new compatibility issue is pretty much slim to none.
If (and it's a big if) your hosting company actually did something that made DW itself incompatible with the server, you would just have to use some other FTP program, like the free Filezilla client, to do your uploads.
Not a big deal, just a small extra step.

HDMI output not working after 1.0.8.6067 update on sharp LCD TV's

Have three TV's two of which are Sharps Aquos and the other is a Samsung. After updating to 1.0.8.6067 the Playbook cannot detect the two Sharps(each different model #'s) . I have three different cables that worked fine before the update and all three cables still work perfectly with the Samsung TV. This issue has been giving me trouble from when i got the device. I even sent the unit back to RIM and of course it was no fault found. About a month ago it suddenly started to work on the Sharps. i've been using the playbook daily on these TV's without incident until the latest software update. It now only works on the Samsung. Obviously something is going on with the playbook HDMI software driver. RIM support was unable to get it working reliable during my 3 month support window. Of course it started to work on the last day of my support but the recent update has put me back to square one. Any suggestions?
Tony

I have not had any issue with any brand TV yet
I dont remember if I tried a sharp on not. I do know that teh several Samasung ones worked fine.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

IPhone5 rear-facing camera and flashlight not working after iOs 7.0.3 update

This is my first time posting here so do forgive me if I leave anything out.
Problem 1
I updated my iPhone 5 to iOs 7.0.3 (on 10/22 when it released). Since then, my rear-facing camera has stopped working. When I open up the camera, it's just a black screen and I cannot take a picture or video, but the other elements on the screen are still functional: changing flash from auto/on/off, turning HDR on/off, switching from video/photo/square/pano, but still the screen remains black. When I switch to the front-facing camera though, it works fine. I can take pictures and video through that view.
Problem 2
The second problem that's happened as well is the flashlight in the control center is greyed out, can't click it at all.
Attempt to Fix
I brought my iPhone 5 to a Genius Bar. Guy took it to the back to open it up and check if there were any physical problems with the phone and camera. He came back, found nothing. Unfortunately my phone was no longer under the one-year warranty, so in order to fully replace the phone with a new or refurbished one, I would've had to dish out $200 something and I wasn't trying to do that just yet. So we decided to just wipe it clean and restore. After we did that, everything was working, the rear-facing camera, the flashlight, things were perfect. I left the Apple store, got on the train to head home. I opened up the camera to take a picture and long behold, it stopped working again. I got home and did the exact same thing the guy did, wiped my phone and restored. Everything was working again. I held my breath though... 1/2 hour later, same problems with the rear-facing camera and flashlight came back.
Just as a note, not sure if it helps, when I use third-party camera apps/photo editors, when I try to use the camera within those apps, it freezes and closes.
I don't know what else to do. It seems the only fix is restoring my phone and having the camera and flashlight work for a few minutes only to go back to the same problems. The Genius Bar didn't help. I'm not trying to give up $200 something when this is something that happened clearly because of the iOs 7.0.3 update. It was working perfectly fine before that.
Any help is appreciated! Thanks!

WORKAROUND FOUND ! Download and install "Awesome Camera" app and take a picture with that app. After 1-2 seconds of standby, it will work. Then you can go back to default Camera app which would work again.Please let me know

Pages 4.2 Not Working after 10.8.2 ML update

Similar Messages

Maybe you are looking for