Pages 5.0 version does not support pictures in header

I recently installed new soft OS X Maverick and along with this also renewed soft for Numbers, Pages, Keynote, and some more apps.
Pages version 5.0 does not support its earlier version pre-set headers and footers. All the logos (picture files) I had inserted for my company template in the header are gone and I cannot re-enter them either. Does anyone can give e a hint on how to use picture files in Pages version 5.0 templates?
This is first time in 2+ years that I prefer to use MsWord over Pages on my Mac, which is a pity.
*I have tried to get used to new soft versions of numbers and pages now for around 3 weeks but it cannot make me to change my opinion that the eralier versions were much better. Unfortunately with OS X Maverick I have to use new versions for these apps, or do I, any hints?
I already deleted once (2 weeks ago) OS X Maverick and switched back to OS X Mountain Lion (I use TM), but then decided after while to still update the op system soft to newest one available, as I've hoped that developers in Apple will come up with their soft improvements and bug fixes soon enough.
Among the other disomforts (like pages, numbers and changed tag system) Safari is much slower than with previous version.
Any hints are appreciated!
Thanks, Paul

https://discussions.apple.com/message/21546508#21546508 check this out

Similar Messages

Using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

Error : software component version does not support this object type.

Hi ,
We are getting error as software component version does not support this object type when we try to create Business Object in PI 7.1 ESR .
How can we solve this error.
Regards,
Syed
Edited by: Umar Syed on Jun 11, 2009 12:01 PM

Hi Srinivas,
We are working on Modelling in SAP PI, but we are unable to create any Business Object.. is there any specific steps need to be followed.
Once we login to our ESR from index page we have this option to choose
Available Profiles :         Process Definition
                                   Service Definition
                                   Unregistered.
We are getting the option of new types (_Business Object_) only if we select Unregistered Profile and not in other Profiles . Is there some settings need to be done.
Regards,
Syed

Error when trying to re-mount a VHDx (the version does not support this version of the file format)

Hi,
I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
it tells me this:
No matter what I try, I can't mount it. Double clicking just says this:
Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start. The data contains the error code.
How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
Thanks for the help
Cheers
Maike

Hi Maike,
Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
In the meantime, check if destination partition is NTFS formatted.
Problem with Attach VHD function: The version does not support this version of the file format
http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Mandy,
I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
So I consider this dealt with ;)
Thanks anyway!

TS1416 It seems the latest itunes version does not support sync functions to ipod classic

I have updated my Itunes to version 11.04 but it seems this version does not support syncing with Ipod classic it seems it only supports the Ipod touch. Does anyone have any solutions for this problem?

Device not recognized. Take note of item 5.
http://support.apple.com/kb/ts1538

Safari version does not support community tool bar

Each time I open Safari 5.1.7 I get message "your browser version does not support community tool bar" does this mean I need to update safari?

That toolbar/ct plugin seems to cause problems for all who install it!
If you are running Tiger or Leopard:
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
If you are running Lion:
From the Finder Menu bar, select Go ▹ Go to Folder, and in the box that opens write:
~/Library/Application Support/Conduit
Delete the second item if it is there.
Now select Go to Folder again and enter /Library
From the folder that opens, delete the following items if they are there (you may need your login password):
Application Support/Conduit
InputManagers/CTLoader
LaunchAgents/com.conduit.loader.agent.plist
ScriptingAdditions/ct_scripting.osax
then close the folder. Now select Go to Folder again and write: /Applications/Toolbars
Delete that item and close the Finder windows you opened. Log out then log back in, and you should be rid of it.
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

How do I tell what version airport express I have? Airport Utility says this version does not support this base station. What to do, how to update?

I tried to add an older airport express to my network that I had not been using. It shows up in Airport Utility but Airport Utility says that this version of Airport Utility Dies not support this base station. I am running airport utility V6.3.4 on a mac mini running OS X 10.10. Not sure which airport express it is, nor how to check. I assume I need a firmware upgrade on the Airport Express, but not sure how to do this without Airport Utility. I tried to download an older version of Airport Utility, but could not install because it does not support OS X 10.10 Any ideas other than throwing a perfectly good airport express away?

Don't throw the AE away. It is still very useful as I have both the old & new each work well (sometimes the sound keeps dropping out but I think that has to do with the wirless settings!!!)
You need Airport Utility 5.6.1 which works in 10.10 - I managed to download a .dmg from the net but not sure how I could get it to you.
The new utility doesn't support the old AEs unfortunately which I have and Apple have no intention of allowing a utility that will cover all
AEs.
Try and get a version 5.6.1.

Safari version does not support community toolbar?

Why am I getting this message with safari 5.1?

The Community Toolbar does not support any version of safari.
That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

I have an older airport express and my computer states that the air port utility version does not support it. Do I need to download an update? My Imac is from SEP of last year, the version with the optical drive

I have an older airport express. My airport utilities states that it does not support this base station. I am try ing to use the airport express in conjunction with a base station to air play my itunes library in another room. I have mountain lion on my Imac (purchased new in SEP of last year. My Imac was the last issued with an internal dvd drive.

Unfortunately, Apple discontinued support of the older AirPort base stations with the introduction of Lion and Mountain Lion.
You might be able to use a somewhat complicated workaround.....not supported by Apple.....if you want to try to use the older AirPort Express.
See this thread for details:
https://discussions.apple.com/message/21397085#21397085
More background info here:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Firefox mac osx version does not support mac-Lion os full screen window mode. When will you bring this?

In macbook pro with lion os apple gives a full-screen-mode icon in the top right corner of the window, which will be used to open that view in different window. But firefox does not support this. Even chrome supports it.
When will you bring this feature to firefox?. Currently I am in firefox 8.0.1

No answers, but Mozilla is aware of the new release of Lion, and hopefully are working on solving some of the known issues. There are some rather formal technical discussions and reports, as mentioned in this contributors thread: [/forums/contributors/707160]

64 bit version does not support exporting to CD/DVD

The ability to burn a cd directly from LR is an extremely important feature which is not supported in the 64 bit version. Please add it to the 64 bit version to work as it does in the 32 bit version. Thanks

Lee Jay wrote:
....Anyway, opticals are largely obsolete.
How do you supply your work to your clients Lee Jay?
What a sweeping and personal comment.
I get through about 100 DVD's a month, putting out GB's of images to clients, providing proofs and originals to clients. Not one has asked me to provide the images on a flash disk or to FTP 4 Gb of high resolution TIFFS, I do FTP on occasion, but 80% of my clients dont want to chow bandwidth, and would prefer a disk or 2.
Maybe you are not a professional phtographer who supplies high resolution images to clients, but my clients dont want to FTP huge images, and won't pay for images to be supplied on flash disks.
Lee Jay wrote:
Apparently, it's an OS driver limitation, as has been discussed in the past.
This is a little more help.
If, as Lee Jay mentions that its an OS limitation which has been discussed ( somehere, but not provided a link), then you will just have to export all the photos to a folder and then burn to a disk.
I export all my photos to a folder and then I put my terms and conditions as a PDF on the disk as well as a jpeg of my card and contact details.At least the disk has information about the shoot, the photographer and T&C's.
These things should be on any disk supplied to clients, so they the images get passed around with your details on, so its not a bad thing that LR can't burn to a DVD.

Camera Raw's latest version does not support Nikon D800

Camera Raw doesn't recognize Nikon D800 - I loaded latest version, but still not reading it.

The answer is all there: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html. Note that your camera is not yet supported, but is on the to-do list.
Mylenium

Can I revert back to my older version 3.6? This 4.0 Version does not support McAfee Site Advisor & I think it sucks!!!

I should have been warned that McAfee Site Adviser would no longer be available with this new version, especially since I paid '''hard earned''' money to McAfee to have this feature. I would not have downloaded this new version had I known ahead of time.
Can I revert back to 3.6?

Use WOT (web of trust):
https://addons.mozilla.org/en-US/firefox/addon/wot-safe-browsing-tool/
Its a way better alternative to McAfee site advisor simply because its open to everyone and supports every browser. Trust me downgrading to 3 is not worth the benefits of McAfee.
WOT user

CR in CS6 Released version does not support the 5D Mark III

Subject says it all.

Canon 5D3 CR2 Part2
FYI, These steps are done on a Windows 7 AZZA (brand) machine. I had my previous version of Photoshop to open TIFF files in the Camera Raw preprocessor..
Chronologically.
I traded my 5D2 and some money for a 5D3 (fro the better focus).
My Photoshop CR4 (PS4) wouldn’t open the 5D3 Raw files (expected)
I downloaded a trial version of PS5.1 extended. It wouldn’t open the 5D3 files either. With the help of photonet I downloaded a copy of Camera Raw 6.1 provisional. It worked.
I purchased a upgrade copy of PS6. It appeared to install normally and ran OK. I did NOT try to open a CR2 file, I then closed PP6, then deleted PS4 from my machine.
I reopen PP6 and It wouldn’t accept the 5D3 CR2s. That was not expected.
I made several attempts to load Camera Raw 6.1 and Camera Raw 7 into PS6. After each trial I made several attempts to open a 5D3 CR2 file. None of the attempts would work.
In desperation, I created a TIF file in Photomatrix 4.1.4 (32 bit) using the JPEGs from the 5D3. (I was preparing for a small show.) This version of Photomatrix won’t open 5D3 Cr2s either.
When I loaded this TIFF file into PS6 it opened the Camera Raw 7.0 preprocessor (PP). With the Raw PP still active I dragged and dropped the CR2 file into it, the PP refused to open it. I then double clicked on the CR2 file, and the PP refused that action too. I completed modifying the TIFF file and closed PP6.
Now I’m trying this and hope I can get some suggestions which will help me to understand why this is happening.
Thanks for any assistance you can provide.

IOS version does not support functions

When I create a document on a mac with certain functions, the document will not sync with ios devices. At first it will if it is a simple document, but then it disappears the moment you insert a funtion like-TODAY.
Is this right?

Brett,
I've never encountered any incompatibilities with formulas between Numbers for the Mac and Numbers for iOS. All very smooth.
Could you post of screenshot of your spreadsheet showing the cell with the offending formula? I'll try to duplicate the problem here.
Also does the same thing happen when you start a new document? Or does it only happen with one particular existing document?
On the Mac you can post a screenshot this way:
1. shift-command-4
2. holding mouse down drag crosshairs across the area you want to capture, and release
3. a file named something like Screen Shot 2014-01-29 at 7.27.28 AM.png will be placed on desktop
4. in editor here click camera icon, 'Choose File', navigate to the file on the Desktop and click, click 'Choose', click 'Insert Image'
Sometimes the "camera" doesn't work the first time, so you just redo the steps in 4.
SG

Pages 5.0 version does not support pictures in header

Similar Messages

Maybe you are looking for