Pages 5.1 not responding after updated from AppStore

I've update my Pages app to v.5.1 in my MacBook Pro and I can't open it after updated. When I open it, it still not responding all time. I've replace Pages app with older version and it can open but I can't open my newer version document that I've edited on New iMac. Anybody can help me? I have to use an iCloud beta now. Thank you

In Pages 5 .plists are now stored within the application bundle.
I will resist telling you to trash any because I am not sure if there are consequences doing so. With Pages '09 it was fine, but they weren't part of the application.
You can validate fonts in Font Book:
select all the fonts > Menu > File > Validate Fonts > turn off or remove those that report errors etc
Also try starting PAges holding down the shift key in case it is simply a damaged Pages file.
Peter

Similar Messages

  • Quicktime 7 not responding when updated from QT6

    To any out there who've heard about this problem, please tell me what I'm doing wrong. QT7 looks amazing and I wanted in but I don't seem to have the right setup?!
    After I restart from the download and attempt to play anything from Apple's QT site, QT opens but no window comes up and the dock shows it's active (the little black triangle). I click and hold the QT icon to Force Quit and I notice that at the top of the menu it states "Not responding". I can successfully quit but upon successive restarts and re-attempts to play anything in QT7 it does the same thing. I've tried updating to QT7 three times now with each new update hoping this problem is resolved but to no avail.
    This also seems to affect my iTunes, doing the same thing to that app as well. No other apps seem to be affected and the QT plugin for Safari works. I don't have QT Pro and I'm running a MIDI rig with a MOTU MTP/AV through the Geethree Serial adapter plus a firewire MOTU 896 and ProTools Audiomedia 3 card. Anybody else going through this and found a fix?

    Hi
    Here is a protools/itunes/quicktime solution I found. It worked for me!
    "Basically the problem has been that the new Quicktime freezes, and takes ITunes with it, when you also have Pro Tools loaded on OSX 10.3.9. Some have remedied this by disconnecting their Digidesign hardware, but it's a temp fix only.
    Re-Installing ITunes will not solve this. You must go to your Digidesign Folder and run your Digidesign Core Audio Setup then remove ITunes from the list. At this point quicktime/ITunes should work fine.
    Also Apple has issued a Quicktime 6.5.2 Re-Installer for anyone who's havimg trouble with the Quicktime 7. Here is the link
    http://www.apple.com/support/downloads/quicktime652reinstallerformac.html

  • VPN not working after Update from SLS to MLS

    Hi folks,
    last weekend I updated my Snow Leopard Server following the suggested procedure, installed first Mountain Lion and then OS X Server. Now I have a problem.
    Setup:
    - Macmini Server located  in my private LAN, running SLS as a virtual machine (VMware)
    - connected to the Internet via an AVM FritzBox 7270
    For HTTP (80) and VPN (500, 1701 and 4500) the ports are forwarded to the virtual machine - everything was working well before the update (access to Website & VPN from both internal and external). The VPN connection is used either with an iPhoen or with my Macbook pro.
    The website is still working like expected. VPN service is not working properly anymore. I can access it from internal, but not from external.
    So, to make it clear, nothing but the server OS changed in the setup.
    Any ideas? Changed ports from 10.6 to 10.8?
    Thanks in advance,
    Andre
    (err, and YES, I have a snapshot of 10.6. - if I revert it's working again, but this can't be the solution)

    Hi all,
    to point out the difference, this is what the logs say....
    Connecting from internal, VPN success:
    21.06.13 18:12:13,880
    racoon[226]
    IPSec Phase1 started (Initiated by peer).
    21.06.13 18:12:13,882
    racoon[226]
    IKE Packet: receive success. (Responder, Main-Mode message 1).
    21.06.13 18:12:13,883
    racoon[226]
    IKE Packet: transmit success. (Responder, Main-Mode message 2).
    21.06.13 18:12:13,921
    racoon[226]
    IKE Packet: receive success. (Responder, Main-Mode message 3).
    21.06.13 18:12:13,942
    racoon[226]
    IKE Packet: transmit success. (Responder, Main-Mode message 4).
    21.06.13 18:12:13,969
    racoon[226]
    IKEv1 Phase1 AUTH: success. (Responder, Main-Mode Message 5).
    21.06.13 18:12:13,969
    racoon[226]
    IKE Packet: receive success. (Responder, Main-Mode message 5).
    21.06.13 18:12:13,970
    racoon[226]
    IKEv1 Phase1 Responder: success. (Responder, Main-Mode).
    21.06.13 18:12:13,970
    racoon[226]
    IKE Packet: transmit success. (Responder, Main-Mode message 6).
    21.06.13 18:12:13,970
    racoon[226]
    IPSec Phase1 established (Initiated by peer).
    21.06.13 18:12:14,881
    racoon[226]
    IPSec Phase2 started (Initiated by peer).
    21.06.13 18:12:14,881
    racoon[226]
    IKE Packet: receive success. (Responder, Quick-Mode message 1).
    21.06.13 18:12:14,881
    racoon[226]
    IKE Packet: transmit success. (Responder, Quick-Mode message 2).
    21.06.13 18:12:14,885
    racoon[226]
    IKE Packet: receive success. (Responder, Quick-Mode message 3).
    21.06.13 18:12:14,886
    racoon[226]
    IKEv1 Phase2 Responder: success. (Responder, Quick-Mode).
    21.06.13 18:12:14,886
    racoon[226]
    IPSec Phase2 established (Initiated by peer).
    21.06.13 18:12:14,890
    vpnd[1210]
    Incoming call... Address given to client = 192.168.0.203
    21.06.13 18:12:14,918
    pppd[1371]
    pppd 2.4.2 (Apple version 596.13) started by root, uid 0
    21.06.13 18:12:14,923
    pppd[1371]
    L2TP incoming call in progress from '192.168.0.117'...
    21.06.13 18:12:14,931
    pppd[1371]
    L2TP connection established.
    21.06.13 18:12:14,935
    pppd[1371]
    Connect: ppp1 <--> socket[34:18]
    21.06.13 18:12:14,944
    UserEventAgent[17]
    Captive: [mySCCopyWiFiDevices:162] WiFi Device Name == NULL
    21.06.13 18:12:15,036
    pppd[1371]
    CHAP peer authentication succeeded for <username>
    21.06.13 18:12:15,042
    pppd[1371]
    DSAccessControl plugin: User '<username>' authorized for access
    21.06.13 18:12:15,052
    pppd[1371]
    Unsupported protocol 0x8057 received
    21.06.13 18:12:15,058
    pppd[1256]
    l2tp_wait_input: Address added. previous interface setting (name: en0, address: 192.168.0.103), current interface setting (name: ppp1, family: PPP, address: 192.168.0.103, subnet: 255.255.255.0, destination: 192.168.0.203).
    21.06.13 18:12:15,058
    pppd[1371]
    local  IP address 192.168.0.103
    21.06.13 18:12:15,059
    pppd[1371]
    remote IP address 192.168.0.203
    21.06.13 18:12:15,061
    pppd[1371]
    l2tp_wait_input: Address added. previous interface setting (name: en0, address: 192.168.0.103), current interface setting (name: ppp1, family: PPP, address: 192.168.0.103, subnet: 255.255.255.0, destination: 192.168.0.203).
    21.06.13 18:12:15,068
    configd[21]
    network changed: v4(en0:192.168.0.103, ppp0, ppp1+:192.168.0.103) DNS* Proxy SMB
    21.06.13 18:12:17,102
    apsd[466]
    Certificate not yet generated
    21.06.13 18:12:18,103
    apsd[466]
    Certificate not yet generated
    21.06.13 18:12:19,004
    apsd[466]
    Couldn't find cert in response dict
    21.06.13 18:12:19,006
    apsd[466]
    Failed to get client cert on attempt 11, will retry in 900 seconds
    21.06.13 18:12:19,066
    racoon[226]
    IKE Packet: transmit success. (Information message).
    21.06.13 18:12:19,067
    racoon[226]
    IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA).
    21.06.13 18:12:19,120
    apsd[466]
    Certificate not yet generated
    21.06.13 18:12:21,802
    pppd[1256]
    l2tp_wait_input: Address deleted. previous interface setting (name: en0, address: 192.168.0.103), deleted interface setting (name: ppp1, family: PPP, address: 192.168.0.103, subnet: 255.255.255.0, destination: 192.168.0.203).
    21.06.13 18:12:21,817
    pppd[1371]
    l2tp_wait_input: Address deleted. previous interface setting (name: en0, address: 192.168.0.103), deleted interface setting (name: ppp1, family: PPP, address: 192.168.0.103, subnet: 255.255.255.0, destination: 192.168.0.203).
    21.06.13 18:12:21,822
    configd[21]
    network changed: v4(en0:192.168.0.103, ppp0, ppp1-:192.168.0.103) DNS* Proxy SMB
    21.06.13 18:12:21,981
    pppd[1371]
    Fatal signal 6
    21.06.13 18:12:21,982
    racoon[226]
    IKE Packet: receive success. (Information message).
    21.06.13 18:12:22,011
    vpnd[1210]
       --> Client with address = 192.168.0.203 has hungup
    21.06.13 18:12:22,022
    UserEventAgent[17]
    Captive: [mySCCopyWiFiDevices:162] WiFi Device Name == NULL
    21.06.13 18:12:23,837
    apsd[466]
    Certificate not yet generated
    21.06.13 18:12:23,839
    apsd[466]
    Certificate not yet generated
    21.06.13 18:12:25,148
    apsd[466]
    Couldn't find cert in response dict
    21.06.13 18:12:25,148
    apsd[466]
    Failed to get client cert on attempt 12, will retry in 900 seconds
    21.06.13 18:12:25,845
    apsd[466]
    Certificate not yet generated
    Connecting from external, VPN fail:
    21.06.13 18:10:52,533
    racoon[226]
    Connecting.
    21.06.13 18:10:52,533
    racoon[226]
    IPSec Phase1 started (Initiated by peer).
    21.06.13 18:10:52,535
    racoon[226]
    IKE Packet: receive success. (Responder, Main-Mode message 1).
    21.06.13 18:10:52,536
    racoon[226]
    IKE Packet: transmit success. (Responder, Main-Mode message 2).
    21.06.13 18:10:52,692
    racoon[226]
    IKE Packet: receive success. (Responder, Main-Mode message 3).
    21.06.13 18:10:52,713
    racoon[226]
    IKE Packet: transmit success. (Responder, Main-Mode message 4).
    21.06.13 18:10:52,882
    racoon[226]
    IKEv1 Phase1 AUTH: success. (Responder, Main-Mode Message 5).
    21.06.13 18:10:52,882
    racoon[226]
    IKE Packet: receive success. (Responder, Main-Mode message 5).
    21.06.13 18:10:52,882
    racoon[226]
    IKEv1 Phase1 Responder: success. (Responder, Main-Mode).
    21.06.13 18:10:52,883
    racoon[226]
    IKE Packet: transmit success. (Responder, Main-Mode message 6).
    21.06.13 18:10:52,883
    racoon[226]
    IPSec Phase1 established (Initiated by peer).
    21.06.13 18:10:53,412
    racoon[226]
    Connecting.
    21.06.13 18:10:53,413
    racoon[226]
    IPSec Phase2 started (Initiated by peer).
    21.06.13 18:10:53,413
    racoon[226]
    IKE Packet: receive success. (Responder, Quick-Mode message 1).
    21.06.13 18:10:53,414
    racoon[226]
    IKE Packet: transmit success. (Responder, Quick-Mode message 2).
    21.06.13 18:10:53,531
    racoon[226]
    IKE Packet: receive success. (Responder, Quick-Mode message 3).
    21.06.13 18:10:53,532
    racoon[226]
    IKEv1 Phase2 Responder: success. (Responder, Quick-Mode).
    21.06.13 18:10:53,532
    racoon[226]
    IPSec Phase2 established (Initiated by peer).
    21.06.13 18:11:13,643
    racoon[226]
    IKE Packet: receive success. (Information message).
    21.06.13 18:11:13,671
    racoon[226]
    IKE Packet: receive success. (Information message).
    Hope you see more than me and can help... :-(

  • Mail not responding after update to 10.10.3

    I am having problems with the mail and its not responding? any ideas?
    I tried deleting com.apple.mail.savedState method and it didn't work at all.

    Back up all data before proceeding.
    Step 1
    If Mail crashes or freezes immediately on launch, try the steps suggested on this page. Sometimes a corrupt message on a mail server can be deleted by logging in to the server through its web page. If Mail still won't launch, skip to Step 3.
    Step 2
    Select all your mailboxes, and then select
              Mailbox ▹ Export Mailbox...
    from the Mail menu bar. Export the mailboxes to the Desktop folder.
    Make a note of the settings for all your Mail accounts – everything you'd need to reconstruct the settings from scratch.
    Quit Mail.
    Step 3
    In the Finder, hold down the option key and select
              Go ▹ Library
    from the menu bar. Move the following items (some may not exist) from the folder that opens to the Desktop:
              Application Support/AddressBook/MailRecents-v4.abcdmr
              Containers/com.apple.corerecents.recentsd
              Containers/com.apple.mail
              Containers/com.apple.MailServiceAgent
              Mail
    Note: you are not moving the Mail application. You’re moving a folder named “Mail.”
    Launch Mail. It will behave as if you were setting it up for the first time. Go through the setup process with one of your accounts, using the information you noted earlier. Test. If Mail works now, recreate the rest of your settings.
    If there’s no improvement, quit Mail and put back the items you moved to the Desktop, replacing any newer ones that may have been created in their place. Stop here and post your results.
    Step 4
    This step should not be necessary with IMAP or Exchange mailboxes, because they synchronize automatically with the server. Nevertheless, if the mailboxes are very large, importing them may spare you the need for a long download.
    If you took Step 2, import the mailboxes you exported:
              File ▹ Import Mailbox...
    Select Apple Mail as the data type.
    If you skipped Step 2, look inside the Mail folder on the Desktop for a subfolder Mail/V2/Mailboxes. Import the mailboxes it contains.
    Test. If Mail is still working, delete the items you moved to the Desktop in Step 3.

  • Reader dos not respond after update installation

    My system is Win7 and yesterday after installation of an update for my Reader 10.0 version the program does not respond. I tried to uninstall and reinstall it many times but the result is always the same: when I double click onto the Reader symbole, the icon appears for 5 seconds trying to load the program and then disappears.
    How to proceed?

    Two more things to try...
    Can you open Adobe Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
    It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

  • Firefox not starting after updating from v24 to v32 on centos 6.5

    I have updated my firefox from version 24 to version 32 recently released for Centos 6.5 in the official packs, but after updating now firefox is not at all starting.
    Even the first screen where it checks for add-ons dependency is also not coming up, what I can see is just firefox starts and crashes within seconds without showing any screen.

    I have successfully resolved this issue on my PC by allowing updater.exe through the firewall. This updater.exe is located in the folder where your Mozilla Firefox was installed. The default folder is "C:\Program Files\Mozilla Firefox\updater.exe"
    Happy Browsing.....

  • Safari still not responding after updating to 8.1.2

    My iPad is fully up to date but still does not open the browser every time.  It comes up with Server not responding.  Mac Format suggested changing the DNS settings but why would you do this when the iMac and iPhone are working fine.  An iPad that can't access the internet is not fit for purpose in my view.  Inly a complete restart cures it.
    Any other ideas?
    Kaibil

    Hi Kaibil,
    It sounds like there’s an issue with Safari not launching on your iPad or it’s not loading webpages since updating iOS.
    If the issue is related to launching Safari, try restoring the iPad as shown in the article below.
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    If Safari launches normally and the issue is related to all webpages not loading and other apps not accessing the Internet, try troubleshooting the Wi-Fi connection as shown here:
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    Ciao,
    -Jason

  • Apple tv 2 not responding after update

    I restored with a micro USB cable and still, when I connect to the TV, I'm stuck on the "choose your language" screen, and the unit does not respond to any of my remotes. (Batteries are fine.)

    Hmm, I'd unplug from mains restart and try again.
    If no joy, restore the unit via itunes again.
    If that doesn't fix it I guess it's back to Apple with the unit.
    AC

  • Canon LiDE 100 does not respond after wake from sleep

    I have a Canon LiDE 100 flatbed scanner. I constantly put my iMac to sleep and only ever shut it down once every few weeks.
    When the computer wakes from sleep the scanner does not respond. Image Capture lists the scanner in the device list but reports the following error;
    "An error occurred whilst communicating with the scanner"
    I have to unplug the USB cable and plug it back in for it to work (or restart the computer, both always work).
    Since I only moved to the Macintosh in July I have no idea how to uninstall drivers to give myself a fresh start and the scanner does not come with an uninstall utility.
    Any suggestions on how to fix this little problem?
    Thanks.

    I am going to respond to my self and say I am nuts.
    Canon does not seem to have any uninstaller for this scanner on their site:
    http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDet ailTabAct&fcategoryid=351&modelid=17104
    Which is rather odd since they have installers. this is different from most of their other older scanners. But if you just plugged in our scanner and things worked in OSX, which it should have, then you should be OK.
    However I can confirm that others see this issue (like my dad) and here is the official Canon response to the issue:
    +Dear XXXX:+
    +In some cases, coming out of sleep mode may not properly reinitialize+
    +the USB bus on Macintosh Operating Systems. Unfortunately, the only+
    +work around when this happens is to restart the computer.+
    Of course this in not exactly true as logging out and back in fixes it.

  • IPad not activating after update from iOS 7

    After updating, It said that it cannot contact with the server and the same with iTunes. Help PLEASE!

    Endless countless millions and millions of people are trying to authenticate AFTER downloading the new IOS.
    Download servers and Authentication / Activation servers are slammed right now.
    Give it some time.   
    download servers VS. authentication servers
    ITUNES is also being updated TODAY.........so, youll have to wait a bit

  • Win 8.1 will not load after update from 8.0

    I have a M6-K010dx with win 8. Was fine for 2 years untill updated win 8.1. Now can not access nor recover or re-install win 8. Was purchased at Best Buy but was not given any software or keys. No keys on bottom. When trying to re-install system it says partistion is not there for use. I have tried to call Best Buy and they say I must buy new software and recovery disks. I have tried to boot from USB but will not do it. Have changed in bios for boot order. I do not have a USB DVD but cnan probably get one. If I DL ISO I will not have key to use.
    It would appear that as the screen flashes on and off that it may be a video driver problem but have no way of fixing if it is. Do not think I should have to buy new software as I paid for it at purchase and not sure if I did I could install from USB. Because of the lack of rercover partition not there I would think I was sold a defective system.
    Any help appreciated.

    Hi @guaranteed , 
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your Windows 8.1 not loading correctly after an update. Windows 8.1 is just an update and would not remove your partition.
    You can reinstall Windows 8 with any Windows 8 disk as long as it is the same version as yours. Windows 8 Home or Windows 8 Professional. It will install and update with no issues.
    You might want to look at this document on some different options.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • App will not open after update from market.

    I have an android app that when I publish an update and the user downloads the update the app will not open.  It opens for a second and then closes.
    This happens even if I do not change anything in the update.
    The only thing I can find is that after downloading the update I clear the cache and it works fine.  My question is does anyone know why this might happen.  Also is there a way to clear the cache at time of update.

    ok i created a hello world app to try a nail down this issue.
    i created the app with version 1.0.0
    uploaded it to my server on the net.
    hit the web address from my phone, downloaded and installed
    then changed the version number to 1.0.1
    uploaded this apk
    downloaded and installed to phone
    app would then open for sec then close
    only fixable by clearing application cache.
    I can't believe the answer to this problem is not available by googling it.
    has no one else encountered this?
    please help, i am scared to release any updates to my programs - massive influx of email from mad users who can not open there apps.

  • Mail not responding after restored from TM

    I restored full data from a MacBook to a brand new MBP today using Time Machine.  Everything looks fine except for Mail.
    It simply doesn't respond.  I already deleted all accounts from System Preferences but when I close and
    open that screen, all accounts are back there, even though I am not syincing with MobileMe.  Any hints?

    I restored full data from a MacBook to a brand new MBP today using Time Machine.  Everything looks fine except for Mail.
    It simply doesn't respond.  I already deleted all accounts from System Preferences but when I close and
    open that screen, all accounts are back there, even though I am not syincing with MobileMe.  Any hints?

  • MDT 2013, D: Wim not applying after update from MDT 2010 to 2013

    Updated MDT from MDT 2010 Update 1 to MDT 2012 Update 1, uninstalled WAIK, Installed MDT 2013, and then ADK, Upgraded all Deployment shares along the way, and now the extra drive (D:) Wim will not apply to Drive, i have tried two different ways to handle
    the said action, the first was using the Unattend.xml, adding the  DataImage Action, the other was using an Imagex command from the MDT task sequence. neither is applying the Wim, before the upgrade this worked. has any one else had this issue? 
    Thank you, 
    Dane Zittritsch
    Thinix Support Manager

    I moved from MDT 2010 to MDT 2013 and its just not working, i have tried a few different methods, the old way we used the
    Unattend.xml and placed a install order and that always worked, but now i am trying to use Imagex and its not applying the wim, when i get in the image the D:\ (Second Drive) is missing files.  Now here is the weird part, if i re-run the task sequence
    the D WIM is applied, but that's counter productive. i will apply my TS.xml information. 
    Ts.xml
    <?xml version="1.0"?>
       -<sequence description="A complete task sequence for deploying a client operating system" name="Standard Client Task Sequence" version="3.00"> -<globalVarList> <variable name="OSGUID" property="OSGUID">{52bb4035-96e5-46f3-9d17-3d2a363895c3}</variable>
          <variable name="DestinationDisk" property="DestinationDisk">0</variable>
          <variable name="DestinationPartition" property="DestinationPartition">2</variable>
         <variable name="DestinationOSVariable" property="DestinationOSVariable">OSDisk</variable>
         <variable name="DestinationOSRefresh" property="DestinationOSRefresh"/>
         <variable name="DestinationOSDriveLetter" property="DestinationOSDriveLetter"/>
         <variable name="DestinationOSInstallType" property="DestinationOSInstallType">ByDiskPartition</variable>
    </globalVarList>
    -<group description="Initialize the TS environment" name="Initialization" expand="true" continueOnError="false" disable="false">
    - <step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly"
    property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action> </step> </group> -<group description="Test"
    name="Validation" expand="true" continueOnError="false" disable="false"> -<condition> -<operator type="or"> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable> <variable
    name="Operator">equals</variable> <variable name="Value">VALIDATION</variable> </expression> </operator> </condition> -<step description="" name="Validate" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="BDD_Validate"> -<defaultVarList> <variable name="ImageSize" property="ImageSize">0</variable> <variable name="ImageProcessorSpeed" property="ImageProcessorSpeed">800</variable> <variable name="ImageMemory" property="ImageMemory">768</variable>
    <variable name="VerifyOS" property="VerifyOS">CLIENT</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIValidate.wsf"</action> </step> -<step description="" name="Check BIOS" continueOnError="false" disable="false"
    startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIBIOSCheck.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    -<step description="" name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> </group> -<group description="" name="State Capture" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
    name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">STATECAPTURE</variable> </expression> </condition> -<step description="" name="Next Phase" continueOnError="false"
    disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    </group> -<group description="" name="Preinstall" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable>
    <variable name="Operator">equals</variable> <variable name="Value">PREINSTALL</variable> </expression> </condition> -<step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action>
    </step> -<group description="" name="New Computer only" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DeploymentType</variable>
    <variable name="Operator">equals</variable> <variable name="Value">NEWCOMPUTER</variable> </expression> </condition> -<step description="" name="Validate" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="BDD_Validate"> -<defaultVarList> <variable name="ImageSize" property="ImageSize">0</variable> <variable name="ImageProcessorSpeed" property="ImageProcessorSpeed">800</variable> <variable name="ImageMemory" property="ImageMemory">768</variable>
    <variable name="VerifyOS" property="VerifyOS">CLIENT</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIValidate.wsf"</action> </step> -<step description="" name="Format and Partition Disk" continueOnError="false"
    disable="true" successCodeList="0 3010" type="SMS_TaskSequence_PartitionDiskAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="OSDDiskIndex" property="DiskIndex">0</variable> <variable name="DONotCreateExtraPartition"
    property="DONotCreateExtraPartition"/> <variable name="OSDPartitions0Type" property="Partitions0Type">Primary</variable> <variable name="OSDPartitions0FileSystem" property="Partitions0FileSystem">NTFS</variable> <variable name="OSDPartitions0Bootable"
    property="Partitions0Bootable">True</variable> <variable name="OSDPartitions0QuickFormat" property="Partitions0QuickFormat">True</variable> <variable name="OSDPartitions0VolumeName" property="Partitions0VolumeName">OSDisk</variable>
    <variable name="OSDPartitions0Size" property="Partitions0Size">100</variable> <variable name="OSDPartitions0SizeUnits" property="Partitions0SizeUnits">%</variable> <variable name="OSDPartitions0VolumeLetterVariable" property="Partitions0VolumeLetterVariable">OSDisk</variable>
    <variable name="OSDPartitions" property="Partitions">1</variable> <variable name="OSDPartitionStyle" property="PartitionStyle">MBR</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDiskpart.wsf"</action>
    </step> -<step description="You can change the size of the partition(s) in the \Scripts\WinRE\DiskConfig.txt file. Make sure your partition is large enough to hold the recovery image if you install alot of software. Current configuration is 160GB
    for recovery, 60 for OS, 10 for scratch" name="Format and Partition Disk [Custom]" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable
    name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010 BETA\Configure-HDD.cmd"</action> </step> -<step
    description="" name="Copy scripts" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTICopyScripts.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> </group> -<step description="" name="Configure" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIConfigure.wsf"</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Inject Drivers" continueOnError="false" disable="false" successCodeList="0 3010" type="BDD_InjectDrivers"
    runIn="WinPEandFullOS"> -<defaultVarList> <variable name="DriverSelectionProfile" property="DriverSelectionProfile">Dell OptiPlex 790</variable> <variable name="DriverInjectionMode" property="DriverInjectionMode">ALL</variable>
    </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action> </step> -<step description="" name="Apply Patches" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_InstallUpdatesOffline">
    <action>cscript.exe "%SCRIPTROOT%\ZTIPatches.wsf"</action> -<defaultVarList> <variable name="PackageSelectionProfile" property="PackageSelectionProfile">All Packages</variable> </defaultVarList> </step> -<step description=""
    name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> </group> -<group description="" name="Install" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
    name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">INSTALL</variable> </expression> </condition> -<step description="" name="[Custom] Apply D Wim " continueOnError="false"
    disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> -<step description="" name="Install Operating System" continueOnError="false" disable="false" successCodeList="0 3010" type="BDD_InstallOS" runIn="WinPEandFullOS">
    -<defaultVarList> <variable name="OSGUID" property="OSGUID">{52bb4035-96e5-46f3-9d17-3d2a363895c3}</variable> <variable name="DestinationDisk" property="DestinationDisk">0</variable> <variable name="DestinationPartition" property="DestinationPartition">2</variable>
    <variable name="DestinationOSDriveLetter" property="DestinationOSDriveLetter"/> <variable name="DestinationOSVariable" property="DestinationOSVariable">OSDisk</variable> <variable name="DestinationOSRefresh" property="DestinationOSRefresh"/>
    <variable name="DestinationOSInstallType" property="DestinationOSInstallType">ByDiskPartition</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\LTIApply.wsf"</action> </step> -<step description="" name="Restart
    computer" continueOnError="false" disable="false" successCodeList="0 3010" type="SMS_TaskSequence_RebootAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="SMSRebootMessage" property="Message"/> <variable name="SMSRebootTimeout"
    property="MessageTimeout">60</variable> <variable name="SMSRebootTarget" property="Target"/> </defaultVarList> <action>smsboot.exe /target:WinPE</action> </step> -<step description="" name="Next Phase" continueOnError="false"
    disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    </group> -<group description="" name="Postinstall" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable>
    <variable name="Operator">equals</variable> <variable name="Value">POSTINSTALL</variable> </expression> </condition> -<step description="" name="Copy Scripts" continueOnError="false" disable="true" startIn="" successCodeList="0
    3010"> <action>cscript.exe "%SCRIPTROOT%\LTICopyScripts.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
    <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Configure"
    continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIConfigure.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable
    name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> -<step description="Applies the D: wim to System " name="Apply Scratch Drive" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS">
    -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable
    name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"\\thinix-dev1\navyImage$\Tools\x86\imagex.exe" /apply
    "\\thinix-dev1\navyImage$\Operating Systems\navycnic-gen_20131226100000\navycnic-gen_20131226100000_ddrive.wim" 1 D:\</action> </step> -<step description="" name="Inject Drivers" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIdrivers.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
    <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<group description="" name="Custom
    Tasks" expand="true" continueOnError="false" disable="false"> -<step description="Makes sure there is no Boot Config files on C drive and changes them to R drive:" name="Recovery Partition" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\Re-assign
    DriveLetter.cmd"</action> </step> -<step description="" name="[Custom] Apply D Wim " continueOnError="false" disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList>
    <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> -<step description=""
    name="[Custom] TDRBCD" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable
    name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\TDRBCD.exe"</action> </step> -<step description="" name="[Custom] Apply D Wim " continueOnError="false"
    disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> </group> -<step description="" name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Set Phase" continueOnError="false" disable="false" successCodeList="0
    3010" type="SMS_TaskSequence_SetVariableAction"> -<defaultVarList> <variable name="VariableName" property="VariableName">PHASE</variable> <variable name="VariableValue" property="VariableValue">STATERESTORE</variable> </defaultVarList>
    <action>cscript.exe "%SCRIPTROOT%\ZTISetVariable.wsf"</action> </step> </group> -<group description="" name="State Restore" expand="false" continueOnError="false" disable="true"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression">
    <variable name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">STATERESTORE</variable> </expression> </condition> -<step description="" name="Gather local only"
    continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/>
    </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action> </step> -<step description="" name="Post-Apply Cleanup" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\LTIApply.wsf" /post</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Recover From Domain " continueOnError="false" disable="false"
    successCodeList="0 3010" type="BDD_RecoverDomainJoin" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="DomainErrorRecovery" property="DomainErrorRecovery">Auto</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDomainJoin.wsf"
    </action> </step> -<step description="" name="Tattoo" continueOnError="true" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTITatoo.wsf"</action> -<defaultVarList> <variable name="RunAsUser"
    property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile"
    property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Opt In to CEIP and WER" continueOnError="true" disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIOptIn.wsf"
    /CEIP:YES /WER:YES</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Windows Update (Pre-Application Installation)" continueOnError="true"
    disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIWindowsUpdate.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    -<step description="" name="Install Applications" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_InstallApplication"> <action>cscript.exe "%SCRIPTROOT%\ZTIApplications.wsf"</action> -<defaultVarList>
    <variable name="ApplicationGUID" property="ApplicationGUID"/> <variable name="ApplicationSuccessCodes" property="ApplicationSuccessCodes">0 3010</variable> </defaultVarList> </step> -<step description="" name="Windows Update
    (Post-Application Installation)" continueOnError="true" disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIWindowsUpdate.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> <group description="" name="Custom Tasks" expand="true" continueOnError="false" disable="false"/> -<step description="" name="Enable BitLocker" continueOnError="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_EnableBitLockerAction">
    <action>cscript.exe "%SCRIPTROOT%\ZTIBde.wsf"</action> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">BdeInstallSuppress</variable> <variable name="Operator">notEquals</variable>
    <variable name="Value">YES</variable> </expression> </condition> -<defaultVarList> <variable name="OSDBitLockerTargetDrive" property="BdeTargetDriveLetter"/> <variable name="OSDBitLockerMode" property="BdeInstall">TPM</variable>
    <variable name="OSDBitLockerStartupKeyDrive" property="BdeKeyLocation"/> <variable name="OSDBitLockerCreateRecoveryPassword" property="BdeRecoveryPassword">AD</variable> <variable name="OSDBitLockerWaitForEncryption" property="WaitForEncryption">false</variable>
    </defaultVarList> </step> -<step description="" name="Restore User State" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIUserState.wsf" /restore</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Restore Groups" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\ZTIGroups.wsf" /restore</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable
    name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Apply Local GPO Package"
    continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIApplyGPOPack.wsf"</action> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
    name="Variable">ApplyGPOPack</variable> <variable name="Operator">notEquals</variable> <variable name="Value">NO</variable> </expression> </condition> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> -<group description="" name="Imaging" expand="false" continueOnError="false" disable="false"> <action/> -<group description="" name="Prepare Only" expand="false" continueOnError="false" disable="false">
    -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">PREPARE</variable>
    </expression> </condition> -<step description="" name="Copy Sysprep files" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> </group> -<group description="" name="Sysprep Only" expand="false" continueOnError="false" disable="false"> -<condition>
    -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">SYSPREP</variable> </expression>
    </condition> -<step description="" name="Add mass storage drivers to sysprep.inf for XP and 2003" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action>
    -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Execute Sysprep" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> </group> -<group description="" name="Capture Image" expand="false" continueOnError="false"
    disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">YES</variable>
    </expression> </condition> -<step description="" name="Apply Windows PE" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTIApply.wsf" /PE /STAGE</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Add mass storage drivers to sysprep.inf for XP and 2003" continueOnError="false" disable="false" startIn=""
    successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
    <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Execute
    Sysprep" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> -<step description="" name="Apply Windows PE (BCD)" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%_SMSTSMDataPath%\Scripts\LTIApply.wsf" /PE /BCD</action>
    -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">ImageBuild</variable> <variable name="Operator">greaterEqual</variable> <variable name="Value">6</variable>
    </expression> </condition> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Restart computer" continueOnError="false" disable="false"
    successCodeList="0 3010" type="SMS_TaskSequence_RebootAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="Message" property="Message"/> <variable name="MessageTimeout" property="MessageTimeout">60</variable> <variable
    name="Target" property="Target"/> </defaultVarList> <action>smsboot.exe /target:WinPE</action> </step> -<step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"
    type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action>
    </step> -<step description="" name="Create WIM" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIBackup.wsf"</action> -<defaultVarList> <variable name="RunAsUser"
    property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile"
    property="LoadProfile">false</variable> </defaultVarList> </step> </group> </group> </group> </sequence>

  • Device not working after updating from 8 to 8.1: SMK Ehome Infrared Transceiver and remote control (usb)

    Hi all,
    An excellent 2015 to you all. 
    I wonder whether it's possible to get my (USB) SMK Ehome Infrared transceiver (which serves to connect my PC to a remote control)  to work again. It functioned okay under Windows 8, but when I upgraded my system to Windows 8.1 it didn't respond anymore.
    How's that possible? And do you have any ideas how I can resolve this?
    I use the remote control to start and stop videos and to adjust the sound volume.
    What I have done already:
    -disabled and enabled the consumer IR devices under 'HID devices' in device management.
    -disabled and enabled the USB controller for the Ehome Infrared Receiver.
    No luck so far. Anybody knows what to do?
    Cheers,
    Peter

    Hi,
    What is the driver status in device manager? Have you tried to manually download the right version driver for Windows 8.1 from the transceiver's manufacture website and install it in your system?
    Meanwhile, please run services.msc to launch services manager, then scroll down to "Human Interface Device Access service", make sure the service is "started" to "manual" or "automatic", test the issue again.
    Yolanda Zhu
    TechNet Community Support
    Thanks, Yolanda Zhu. There is no driver on the manufacturer's website, but the driver is included from  Windows versions XP to 8 and the device responds as expected under these OS Versions. In Windows 8.1 it seems also to be included, and device manager
    indicates under Human Interface Devices that the 'Microsoft eHome infra transceiver' driver  functions correctly and under
    Universal Serial Bus controllers that 'eHome infrared receiver' (USBCIR) functions correctly as well.  But when I press the remote, the red LED blinks, but nothing else happens.
    The "Human Interface Device Service" is set to automatic and is being executed.
    Can it be that the mapping ('action on remote' to 'action on PC') is lost somehow?
    Cheers,
    Peter AKA Django

Maybe you are looking for