Pages 5.2: how to reflow tables

I am preparing a document and have pasted a table from Numbers.
When I add text before the pasted table, the table itslef does not move down with the text.
Does anybody know if there is a way to force a pasted table to reflow with the text?
Thanks!

Select the Table and in the Format Pane, Arrange tab, choose Moves with text.
Jerry

Similar Messages

How to: Print table on first page, use second page (back) for text only

Hi, I am looking for a clear document on how to use pagination and the Odd and Even pages.
We need to print a table over several pages, but only on Odd pages.
On the back of each page we need to print "Terms and Conditions". Is that possible? Can it be done without scripting
We are on ADOBE version 8.1
In the file properties, double sided is switched on, and version set to 8.1 and higher.
I created two Master pages, a FrontPage with ContentArea1and a BackPage with ContentArea2.
FrontPage is used for uneven pages, BackPage is used for the even pages. The masterpages are printed correctly (alternating properly).
Two pages were created for the content area's:
ITEMS: contains item data (table with header and footer). Place is "On Odd Page". After "Goto page BackPage". And if the table needs to be paginated it goes to BackPage with overflow leader "Conditions".
CONDITIONS: contains a textfield (Terms and Conditions). Place is "On Even Page". After "Goto page FrontPage". No overflow.
What should happen is that on the front pages the item table is printed. If there are too many lines it should overflow to page number 3 then 5 etc. All the even pages should display the text.
What actually happens is that the item table also gets printed in the content area for the Condition text...
Also the "Conditions" are not printed on the last back page. But only once before it...
Cheers,
Edwin.

Fixed it... After a lot of creating, deleting, playing around with pagination and the inevitable cursing...
I have created 5 pages:
1. FirstPage
     - Odd/Even: Odd (Front) Pages
     - Placement: First page (In page set)
2. FrontPage (For Odd pages)
     - Odd/Even: Odd/Front Pages
     - Placement: Rest of Pages
3. BackPage (For Even pages)
     - Odd/Even: Even (Back) Pages
     - Placement: Rest of Pages
4. LastPage
     - Odd/Even: No Odd/Even Restrictions
     - Placement: Last page (In page set)
5. DummyPage
     - Odd/Even: Blank pages
The 'Terms and conditions' are located on the BackPage and LastPage (as a text).
The table that is printed is (of course) located on a normal page (flowed subform).
Pagination tab: Placement = Following previous, and After = "Continue filling parent". No overflow... Basically, it's all default.
The table lines will now start on the first page and if there are more lines than can be printed on this page, it will continue in the next content area. That will be on the FrontPage.
The trick is that each master page must have a content area (mandatory). Except for Blank pages, but these cannot be used... Blank pages would only be used once, after the first page.
What I discovered is that you can drag a content area away from the Master page and attach it to a different master page.
Logically, if there is no content area on a page, then data cannot be printed there. So, I created a Dummypage. On this page I dumped the content areas from the LastPage and the BackPage. As a result, content cannot be printed anymore on the back of pages. Only the standard text (a text field) is printed there. When the data from the table is overflowing, it will automatically overflow from the FirstPage to the next content area. Which is located on the FrontPages only.
The DummyPage is NOT used anywhere.
The result is that the records can only be printed on the content areas that exist on the First and Front pages. The back pages are now skipped.
Duplex printing is now working correctly, and the text is printed on the back of all the pages.
Cheers,
Edwin.

How to get table headers in jsp page

hi,
this is praveen, can any one help me to solve this problem.
how to get table headers in a jsp page. whether it is possible using javascript or is there any other way.
pls send rep.
thank u.

Hai ,
I Think This will help ful for u check it ,
File=new FileLog("f:/WebServiceTrace/trace2.%g.log", 800000, 10,                                        new TraceFormatter());
The above code specifies the path for your log file.
Then add this file as a log location and then log the traces. For this you can use the following code like:
Location location=Location.getLocation(className);
          location.addLog(file);
          location.setEffectiveSeverity(Severity.ALL);
          location.entering(methodName);
To Create j2ee apllication
In path new-j2ee-jsp to create JSP's can only be used for J2EE applications.
So as you are using this in Portal Application, this does not work.
You can test this bahavior by creating a new Web Application (New-Project-J2EE-Web Module Project)
In this Web Module Project, try creating JSP, this will work.
So dont use new-j2ee-jsp to create JSP in Portal Application instead use New-File and name the file as jsp.
Regards ,
venkat

How to split table in the report so it shows on the next page?

Hi,
How to split table in the report so it shows on the next page? Im trying to fit long (many columns) table into my report page. It is too long however. I want it to wrap and show the rest on the next page. What I get now is table cut at the page end and rest is not visible.

Yes, this might be that the amount of data will cause table to grow and exceed 1, 2, 3.. pages. In that case I would probably want to have, lets say , one half of columns on 1st page then the other on the 2nd page and then repeatedly the same sequence down across all pages. Is there a way to achieve this?

I am trying to link to page in my document from the table of contents. How can this be done?

I am trying to link to page in my document from the table of contents. How can this be done?

The Table of Contents picks up selected named Styles in the text like Head 1, 2 etc.
Have you actually applied the styles?
Peter

How to update table styles in the new Pages?

Anyone found out how to update table styles in the new Pages? I see it's done in some of the templates that Apple provided, but I can't find it. Also, the Copy table style command is gone, so I can't make my tables look in a uniform way, unless I use one of the built-in styles.
Thanks.

I'm having the same trouble. Looks like no way to create an overal 'table' style and I cannot access the table paragraph styles either.

How to display table in jsp pages

hi all ,
i want to diaplay the table in jsp page...ie,if i click on some option then i need to get the table in jsp page
wiil u plz help me
thanks in advance
chintu

hi all..
i didnt ask how to design table in jsp...i am asking how to diaplay the table with data already stored in database...i just want to retrive the values in table and display in jsp.....
thanks in advance...
chintu

How to stop table row from being split onto two pages

How do I stop a row of output from being split between two
pages. When the CFDocument loads, sometimes, the last row on a page
"spills" over onto the next. I'd like to figure out who to prevent
these "orphans" from happening, and force the row onto one page or
the other.
Here's my code for the doc... I have a sp that querys the sql
db. Using CFDocument - CF Version 7.02

If you know roughly how many lines of output will fit on a
page (you can test to find out), then you can count result lines
(you should be able to use RecordCount and do some math) and cfif
against your counter and force a page break beforehand if the next
table will be too much to fit on the page. Then just reset the
counter after you page break.

Smartforms how to print Table rows on to the next page automatically

if this question is answered pls point to the the link
SMART forms:
layout : Half of my A4 page is filled with templates, a small portion is footer, the middle portion is Table.
Note: i have set the condition for the footer as (tick the check box) "only after end of main window"
Output:
                   the template is displayed the table is populated on the first page, no footer on 1st page,
                on page 2 the table rows are printed (table rows were a lot) and finally footer got printed every thing as per normal
what i want is:
                 instead of the table lines printed in the middle of page 2 (bcz my main window table is in the middle, top is templates)
                 i want the table lines (after filling the main window table lines in the 1st page) to continue to print from the
                 top of the page on page 2 and immediately after the table rows finish. footer must be printed....
what should i be doing to get this output

dear bob,
yes i have done that already as u said, when i do it......
i created a new page (next page) directed first page to next page
on the next page my layout is like below
removed all the templates dragged the main window to the top of the page......
when i check the result, there is an empty line as the first line in the table (2nd page)
and also the footer (again a template) on the first page, which is ticked as ( print after end of main window) is NOT displaying.

How to create table in bisystem

hi,
how to create table in bi system.
My requirement is such like that i want to store data which is used in the routine.
i want to maintain the data dynamically so that i want to create the table.

Hi.........
Same as ABAP only...........using SE11........
Steps for creating table:.
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
Hope this helps......
Regards,
Debjani..........

Sap script '' how to create table frame in sap script"""

i have some problem in sap script'' how to create table frame in sap script"""

Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar.

How to display Table in Interactive PDF with WD-ABAP

hi All,
I have to display a tablewith 4 rows in Interactive PDF form, and i am using WD ABAP.
These are the steps i have followed.
1. I have created a table line for the required table
2. Dragged the table line from data view to body page.
3. Wrapped the table in subform ,and made it to type "Flowable".
4. Unchecked the check box saying repeat row for each data item for table and for the header row.
Now when i preview it works fine and display 4 rows, but when the same PDF is called through Web Dynpro component, it shows an error that related to SOM Expression of that line type.
Any idea how to get rid of this error..??
If somebody could also let me know if the steps followed to display the table are correct...??
All replies will be appreciated.

Solved it myself, changes the cardinality to 1:N of the context node

How to handle table selection

In the uix guidelines i found the following example on how to handle table selection:
public static EventResult doSelectionEvent(BajaContext bc, Page page,
PageEvent event)
DataObject tableRows = new PageEventFlattenedDataSet(event, "table1");
int index = SelectionUtils.getSelectedIndex(tableRows);
String name = "Nothing Selected";
// make sure that something was selected:
if (index>=0)
DataObject row = TABLEDATA.getItem(index);
name = row.selectValue(null, "name").toString();
EventResult result = new EventResult(page);
result.setProperty("action", event.getName());
result.setProperty("name", name);
return result;
It is not clear to me what TABLEDATA is.
I read in some other thread that it is a DataObjectList and it represents the 'stored dataObjects'.
I suppose '_TABLE_DATA' is not real code, may i ask for an example with real code to understand what it is?
Thanks.

This code works for me, I hope it is useful.
(NB: i fear you will not read correctly the line
with the getRowAtRangeIndex instruction. It's a problem with the editor).
Mauro
package view;
import javax.servlet.http.HttpServletRequest;
import oracle.adf.controller.struts.actions.DataActionContext;
import oracle.adf.controller.struts.actions.DataForwardAction;
import oracle.cabo.ui.beans.table.SelectionUtils;
import oracle.cabo.ui.data.ServletRequestDataSet;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Row;
import oracle.jbo.ViewObject;
public class GestEsAction extends DataForwardAction
// To handle an event named "yourname" add a method:
// public void onYourname(DataActionContext ctx)
public void onValida(DataActionContext ctx)
ServletRequestDataSet ds = new ServletRequestDataSet(req,"ReEsamiRichView12");
int[] indices = SelectionUtils.getSelectedIndices(ds);
ApplicationModule am = ctx.getBindingContainer().
getApplicationModule();
ViewObject vo = am.findViewObject("ReEsamiRichView1");
int len = indices.length;
String idEsameRich, currStato;
for(int i=0; i<len; i++)
Row row = vo.getRowAtRangeIndex(indices);
idEsameRich = row.getAttribute("IdEsameRich").toString();
currStato = row.getAttribute("Stato").toString();
if (currStato.equals("E"))
row.setAttribute("Stato","V");
am.getTransaction().commit();
// To override a method of the lifecycle, go to
// the main menu "Tools/Override Methods...".

How to handle Table control in BDC

How to handle Table control in BDC

HI,
Table Control in BDC
HI,
Refer the link:
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
The concept is easy: it has to indicate the index of the table control in the field name, so if you have to populate the first record of table control:
BDC-FIELDNAME = <FIELDNAME>(01).
If you fill the second row:
BDC-FIELDNAME = <FIELDNAME>(02).
and so....
Now the problem is usually on how many records you have to load, because u can fill only the rows of table control available in the screen, If you have more records than it can be displayed yuo have to simulate the command to go next page.
The number of recod can be displayed can depend on pc resolution and many program haven't command to go to next page (in this case it could be impossible create a BDC program9.
A way to create a bdc program resolution indipendent is to work on the first and second row.
- Place the first hit in the first row of bdc;
- Place the second insert in the second row of bdc;
- Place the last hit to the top of table control;
- Place the next hit in the second row;
- Place the last hit to the top of table control;
- Place the next hit in the second row;
- .... and so
For more info: Search in SDN with TABLE CONTROL IN BDC.
Will get a lot of related links.
<b>Reward points if this Helps.
Manish</b>

How to Draw table in SAPscript ???

Hi all Guru of SAPScript!
I want to draw a table with column and row in SAPscript. Who can help me step by step?
Thanks!
Edited by: kathy a on May 6, 2008 11:53 AM

Hi,
Use BOx Syantax How to Draw table in SAPscript ??? Pls Read the description
Syntax:
1. /: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
2. /: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
3. /: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each parameter (XPOS, YPOS, WIDTH, HEIGHT and FRAME), both a measurement and a unit of measure must be specified. The INTENSITY parameter should be entered as a percentage between 0 and 100.
XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH: Width of the box.
Default: WIDTH value of the SIZE command.
HEIGHT: Height of the box.
Default: HEIGHT value of the SIZE command.
FRAME: Thickness of frame.
Default: 0 (no frame).
INTENSITY: Grayscale of box contents as %.
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP/4 numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measure: The following units of measure may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
Examples:
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION
Syntax:
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words as a value which specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN: Origin of the coordinate system.
WINDOW: Sets the values for the left and upper edges to be the same of those of the current window (default setting).
PAGE: Sets the values for the left and upper edges to be the same as those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
Examples:
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE
Syntax:
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT: Dimensions of the rectangle or line.
WINDOW: Sets the values for the width and height to the values of the current window (default setting).
PAGE: Sets the values for the width and height to the values of the current output page.
Examples:
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
Reward Helpfull Answers
Regards
Fareedas

Pages 5.2: how to reflow tables

Similar Messages

Maybe you are looking for