Pages and Navigation Pages

What's the difference between Pages and Navigation Pages? Can I change a Page to Navigation Page? If yes, how?
Thanks a lot.

The basic problem is that the default page only applies when you haven't yet accessed the book. Once you have accessed it , the last accessed page within the book is what gets displayed. (if the page label specified is the books).
as before, you either must implement your logic in a backing file or you must generate the url to the book correctly (by having the page label of the page you want active) i.e. if your book has a pagelabel b1 and your pages have labels p1 and p2 and you always want b1 to goto p2 (the default) , then whenever you want to generate a URL to the book you must use P2 as the label (whether it is custom menu or anywhere else in your site).
The reason the first option is preferable because the logic lives with your book's backing file, in the second case it is spread out (even if you use a helper)
regards
deepak

Similar Messages

  • HT204135 I recently migrated from a 2 year old MacBook Pro to MacBook Pro Retina and now cannot get my LaserJet 3200 to print. I downloaded drivers from HP Support site but printer just prints a line of gibberish per page, and many pages.

    I recently migrated from MacBook Pro to MacBook Pro retina. Now my macbook will not print to my LaserJet3200 printer. I downloaded the drivers but still only prints a line of gibberish per page, and endless pages, when i send printer a print job. Any recommendations on how to correct this so the printer prints properly again?

    Hi
    where can I find the "generic PCL driver" you referred to Greg?
    Also, I searched for a LJ 2100 d4river and found these. should I be working with the HP website? or an apple website? my Apple software update is current.
    Find by product 
    Go
    How do I find my product name / number?
    5 matches found. Please select one below
    HP LaserJet 2100 Printer series
    HP LaserJet 2100 Printer
    HP LaserJet 2100m Printer
    HP LaserJet 2100se Printer
    HP LaserJet 2100tn Printer
    HP LaserJet 2100xi Printer

  • Different Footer on First page and last pages

    Hi
    I am trying to display Continue on first page and middle pages and Total Amount on last page on a multipage PO. I can display different footer page for first page and last page but the middle pages don't have a footer. How to do this if possible. There are so many threads here but not one gives the exact steps.
    first page header footer
    Add Page Break
    2nd page header footer
    Add Section Break => Next Page
    <?start@last-page-first:body?><?end body?>
    last page footer
    Please help
    Thanks

    Did you miss this ?
    http://winrichman.blogspot.com/search/label/different%20page%20header
    http://winrichman.blogspot.com/search/label/element%20in%20header
    http://winrichman.blogspot.com/search/label/diff%20header

  • Differentiate between oa page and iStore page(jsp)

    Hi,
    How to Differentiate between OA page and iStore pages?

    If the URL contains the JSP tag as OA.jsp or RF.jsp, then its an OAF application else if you see some custom jsp, eg, jftchrome.jsp etc, then the application is JTT/JTF based application:
    eg:
    OAF application:
    http://sampledomain.oracle.com:5000/OA_HTML/*OA.jsp*?.......
    http://sampledomain.oracle.com:5000/OA_HTML/*OA.jsp*?.......
    JTT Application
    http://sampledomain.oracle.com:5000/OA_HTML/*jtfchorme.jsp*?.......

  • Previous Page and Next Page functions lost

    The Previous Page and Next Page icons suddenly vanished with only the Reload Page and Add Bookmark icons showing. The only way I am able to return to a previous page is through History. Will I have to reintall Safari? and, if so, can I just install Safari without jeopardizing my data not only in Safari but other applications? I have original OS X 10.2 and 10.3 discs. Can I reintall over the existing Safari app?
    Thanks much.
    TeddyZ
    G4   Mac OS X (10.4.3)  

    Sorry, but this didn't work at all. I think Safari has been corrupted and think I'll have to reinstall.
    Do I deinstall? or can I reinstall over the existing Safari? And can I isolate Safari with my existing OS discs (I have both OS 10.2 and 10.3.5)?
    I have an external hard drive. Could that be helpful in this process?
    (I suspect that all my bookmarks will be lost, but can compensate by printing them out in hard copy).
    G4   Mac OS X (10.4.3)  

  • How do i stop firefox from opening the addons page and the page that tells me what version i am running

    Firefox keeps opening the add ons page and a page telling me what version i am running every time i open it,how do i stop it from doing this
    == This happened ==
    Every time Firefox opened

    try :
    via about:config
    startup.homepage_welcome_url",""
    startup.homepage_override_url",""

  • On myspace home page and inbox page it will not show full page it is in the center,hard to read

    MY MYSPACE HOME PAGE AND INBOX PAGE IS NOT SHOWING FULL PAGE...ALL GONE TO THE CENTER
    == URL of affected sites ==
    http:// www.myspace.com/orangebyrd

    I did control and 0 and it worked,,thanks,thanks,thanks... (first time I did it wrong I hit ctr 1 and 0...)...Oh I am so glad I have it fixed ,cannot thank you enough..........Jean
    WOW, I am so thrilled to get it back to normal...whoever helped me God Bless You...

  • I keep getting this error message and the spinning wheel on all websites, any fix? (Webpages are not responding, so loading cannot be stopped. Do you want to force reload this page and all pages in other tabs and windows?)

    I keep getting this error message and the spinning wheel on all websites, any fix? (Webpages are not responding, so loading cannot be stopped. Do you want to force reload this page and all pages in other tabs and windows?)

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • When I open browser I get my home page and foxtab page; how do stop foxtab from opening

    it started to happen when after installing foxtab compatible version with firefox .when I open the browser I get both my home page and foxtab page; how do I stop foxtab from opening by itself

    FoxTab appears to be a problem, and people mention black pages, so try "Ctrl+Shift+A" to get to addons, and disable FoxTabs.

  • Default to single page and fit page

    Each time I export to PDF from Indesign CS4 I have to then go to Properties/initial view/then set single page and fit page. Is there any way to change the default so that it defaults to these views in Acrobat 9?
    Thanks
    Ian

    It should only be overridden if the properties are set in the PDF. You might check for the properties being set by ID. As I have read, ID generally does it's own export of a PDF and does not use Acrobat.

  • Difference between Body pages and Master Pages in Adobe forms?

    Hi SAP Gurus,
    Please can any one tell me the difference between the Body pages and Master Pages in Adobe Forms?
    In what scenarios we use Body pages and Master pages?
    And also please tell me what is Boiler plates? When these used?
    Thanks and Regards
    Abinava Siri..

    Hi,
    Master Pages:
    Does not included in the content area
    Master page we will design logo,company address and header information
    Here we can desing footer information
    whatever you desing in the master page it will show for all the body pages
    Body pages:
    Included in the content area
    Where we can design table data, it should repeat for line times.
    Regards
    Ramakrishna Pathi

  • ADE 2.0 does not have functions of divided page and single page- like ADE 1.7?

    I have a question for specification between ADE 1.7 and ADE 2.0.
    ADE 2.0 does not have icon buttons for "divided two-page" and "single page" like ADE 1.7? Since ADE 1.8 Preview version was temporarily available to download, there has been disappeared such functions....

    There are lots of bugs in ADE2.0 (and 2.0.1).  Try replacing ADE2.0 with the older but more reliable v1.7.2.
    (You can have them both installed at once if you like.)
    Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
    http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
    The forum software is sometimes corrupting the link above.  There shouldn't be a blank in 'editio ns.html'.  The following redirects to the same page: http://tinyurl.com/diged172
    Some people have found ADE trying to upgrade automatically. 
    It appears (not 100% sure) that if you install ADE2.0 as a new install (not as an upgrade) that your 1.7.2 will continue to run.
    Probably best to say no if 2.0.x installation asks if you want to migrate your library.

  • Adobe reader has buttons next page and previous page, why not also top of current page and bottom of

    Adobe reader has buttons "next page" and "previous page",
    why not alson "bottom of current page" and "top of current page" ,
    these would be very useful if the page is increase to the maximum left and right

    This is a user forum; if you have any product enhancement requests, do it here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Animatioin get distbub while navigation from previous page and next page

    animatioin get distbub while navigation from previous page and next page

    To get the value from dropdown list:
    For example:
    <b>In Layout</b>
           <htmlb:dropdownListBox id                = "country"
                                   nameOfKeyColumn   = "land1"
                                   nameOfValueColumn = "landx"
                                   selection         = "<%=country%>"
                                   onSelect          = "displayregion"
                                   table             = "<%=iland%>" />
    <b>Oninputprocessing:</b>
            CALL METHOD REQUEST->GET_FORM_FIELD
              EXPORTING
                NAME  = 'country'
              RECEIVING
                VALUE = country.
    <i>*Reward each useful answer</i>
    Raja T

  • How can i deploy a silverlight application when it contains an aspx page (And Aspx page content is a DevExpress Scheduler)

    I have a silverlight application. It has containing many navigation pages in it. One of this pages is containing an .aspx page and i have used devexpress scheduler on there. It is working perfect on development machine but on production machine when client
    logged and navigate to the scheduler page there is a message top of the page saying
    webbrowser is enabled only for out-of-browser applications running with elevated permissions in Internet Explorer.
    And i have found something like that
    https://msdn.microsoft.com/en-us/library/gg192793(v=vs.95)
    But I think my problem is not that in my project properties i always checked the require permission checkbox. i couldnt understand this behavior and how can i solve. I tryed to use .pfx file by adding in project properties signing tub. Even i couldnt understand
    how why are we using this certificate and is it interesting with it
    Also now i seen in my development machine when i opened this page a popup window come up this message:
    the current webpage is trying to open a site in your trusted sites list. Do you want to allow this?
    current site: res/npctrUI.dll
    Trusted site: localhost
    warning allowing this can expose your computer to security risk. If you dont trust the current page, choose no.
    regards
    Hamit YILDIRIM

    Things that require elevated trust will always work in visual studio.
    You need elevated trust to use the webbrowser inside a Silverlight page on a user's machine.
    That means purchasing a security certificate.
    https://msdn.microsoft.com/en-us/library/gg192793(v=vs.95)
    You can open up any old web page in another tab from Silverlight and I would suggest you consider that instead of using a webbrowser control inside a Silverlight page.
    Hope that helps.
    Technet articles: Uneventful MVVM;
    All my Technet Articles

Maybe you are looking for

  • Some fields are getting hidden in contract..

    Hi All, I have a problem while creating contract in ME31K. Start of Validity period validity period end fields are getting hidden in ME31k. Field selection group for the contract document type is WKK and these fields in this group are 'required entri

  • SAP Smartforms

    Hi All, In My Smart Form i want to print the date and Amount As per the Ship To Country , i use the SET COUNTRY command but i am not getting that as Per the Country , So please tell me how can i do that . Thanks Himanshu Sharma

  • Material column is empty in VF04

    Hi, In the material field of VF04 is not showing anything. What i have done is i goto SE11 -> put VKDFI under database table. Then under component tab, i put in a component MATNR and activate it Goto VF04 -> execute. In the maintain billing due list,

  • Sun directory server 6.3.1 admin conlsole

    Hi In my sun directory server 6.3.1 admin conlsole and Applications view I have the following: Server Group Server Group (2) Administration Server Identity Synchronization If I click on the Directory Server I get the following error: This server comp

  • Recovered files in my trash

    Well although I didn't delete folder named Recovered files once in week that folder is in my trash. Is that normal process or something is wrong?