Pages cannot read or save files to MobileMe?

I find it bizarre that Pages-iPad does not allow to share data with
iDisk.
Is it just me or is this a missing feature?
Regards

http://support.apple.com/kb/HT406
You can tell Apple how you want Pages improved here:
http://www.apple.com/feedback/pages_ipad.html

Similar Messages

UPDATE : Toshiba Recovery Wizard 'cannot read from source file or disk' error (satellite L500)

UPDATE 2: Phoned Toshiba tech support again, guided by techie to begin the recovery again. Just before phoning I was able to go into recovery options and view the drive setup and all the files that couldn't be read are on the CD so I've no idea why the error kept occuring, and neither did the techie. Fingers crossed it works this time but I'm not overly hopefully given that we've just done exactly the same as I did before. UPDATE 1: I got into the BIOS and reset everything back to defaults and yay, my toshiba recovery wizard now starts! :-D On the down side, when trying to do a factory default software / out of the box recovery I continually get error messages with regards to copying the files, for example
cannot read from source file or disk
7z.dll
Type application extension
size 585kb
date modified 7/14/2009 10.26pm
other read / copy errors include PREINST6.SWM, BOOT_32, BOOTPRIORITY, CHECKMAXPTSIZE, CHGBOOT, CPU, CPUCHECK, CREATEPARTITION, CTRLDRVINFO, DISKWIPE, DMI, DPINST32, EBLIB.DLL, ERRORDIALOG, EW3BOOTSEQ, FWLINK, FWLINK.SYS, GETHDDINFO, GETKEYSTATE, IMAGEX, INFILED, INITRECAREA, KRAIADAPI.DLL ..... at which point I decided to 'skip all' :-/
Any explanations as to what's going on and how I might be able to fix it would be very much appreciated! :-) Thank you!
I have a two and half year old satellite L500 with an Intel i-3 and 4 gigs of RAM, on which I was running Windows 7.
Admittedly it’s had rather a hard life (I ran some very demanding CAD / graphics software on it) but it had always performed well until just recently, when after suffering several BSOD (which had never happened before), the hard drive failed.
I partitioned and formatted a brand new hard drive (which is perfectly fine and functions normally when hooked up to another laptop with a SATA to USB cable) and obtained system recovery discs from Toshiba. Unfortunately, when I try and run the first disc, windows starts to load files but then generates an error screen with the message Error F3-F100-0003 and a request to turn the computer off.
When I use the windows Memory Diagnostic to get into the Windows Boot Manager Screen I get the following;
Windows failed to start. A recent hardware / software change might be the case.
To fix the problem
Insert your windows installation disc and restart your computer
Choose your language settings and click ‘next’
Click ‘repair your computer’
File: \boot\memtest.exe
Status: 0xc000000f
Info: the selected entry could not be loaded because the application is missing or corrupt.
I can also use F8 on startup to get into the advanced boot options but selecting any of them simply results in the F3-F100-0003 error message. I’ve run a memory test using the UBCD, which tells me the memory is fine, and tried another hard drive (which also works perfectly well in another laptop) but no joy. On phoning Toshiba support the techie said my hard drive had failed, but as I say, both hard drives are perfectly fine / usable when hooked up to another laptop. I’m now completely stuck as to what the problem is and how I might resolve it – any advice / suggestions would be most gratefully received! Thank you in advance :-)

Satellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry

Recovery Disk Error : cannot read from source file or disk HOW TO FIX ISSUE

I have had my satellite L655-S5096 for some time now.. I had to switch out hard-drives the other day and installed windows 7 home on it from my own disk. I tried to download all the drivers needed, but the graphics and wifi drivers never worked, so I pulled out the old toshiba disks to start from new with this harddrive.. It gets to asking me for the second disc, then the second disc gives me the the "cannot read from source file or disk PREINST8.SWM" This is from the "out of the box" setting, which is recommended. I do not know how to fix this issue besides reinstalling windows 7 from my disc and trying to get the drivers to work again.. however I shouldn't have to since I have the Toshiba recovery disks.. do I need new disks?
Yes, I also had the hard drive drivers and all of that installed.. my toshiba reads the HDD just fine.
~Drew

Satellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry

Cannot Read Entire TXT Files in "Notes" folder

Ihave a 4G iPod nano (red, if relevant... I think it's a 4g?) I cannot read entire text files in the notes folder. I can read part of the file, usually up to about a 2 KB size in standard Unicode format, but I am unable to view the entire text file. For example, I have a copy of Beowulf on my iPod that is about 267KB in size; however, I can only read through 1.87KB of it. The rest shows up in Windows Explorer and is fully functional there, but I Cannot view it from my iPod.
Anyone else have this problem, and know what I can do to fix this (besides breaking it up into about 50 chapters?)
Thanks Much!
intel.ectual
programmer, code-guru, and graphic designer
Compaq Presario Athlon 1.7GHz 64-bit 1GB RAM and a very comepetent user Windows XP Pro
Compaq Presario Athlon 1.7GHz 64-bit 1GB RAM and a very comepetent user Windows XP Pro

The max size for any note that can be read in the notes on ipod is 4kb. That said there is no alternative way of getting around this size. here is a good article about working with ipod notes.
http://www.macworld.com/2004/09/secrets/septgeekfactor/index.php
and on another note from another of your posts.
jsut to make you aware of not doing something stupid adn cursing about it.
DO NOT TRY AND USE IPODLINUX ON YOUR IPOD NANO.
unless you really want to VOID your warranty and also fry your nano to become a expensive PAPERWEIGHT!!
many have stupidly done this and have come here cursing as to why their ipod nano is fried adn not working at all! Just be smart and make note that that hack software doenst even work for the 2g ipod nano!
GFF:)

I recently purchased a Mac 0S X 10.6.6 which was an upgrade from the Mac OS 1.4.1.1 I downloaded the adobe ph otoshop CS2 which I had on my old computer and now it cannot read my NEF files. Which is a RAW file from my Nikon. Can anyone help...please?

I recently purchased a Mac OS X 10.6.6 which was an upgrade from my Mac OS version 10.4.1.1 I downloaded the Adobe Photoshop CS2 which I had on my old computer and now it cannot read my NEF files which is a RAW file from my Nikon D200. I did not have this problem on my old Mac. I always shoot RAW and can't open any photos. Can anyone help me PLEASE?!?

Do you have access to another Mac to see if the disk can be read by it? If it can't then you're pretty sure it's the disk. If it can then there may be issues with your optical drive which might be cleared up by using a cleaning disk on it, one that uses dry brushes (no liquid).
If you have access to another Mac and it can read the iWork disk make a disk image of it so you can move the disk image to your iMac and install from the disk image.
OT

Cannot read from menu file!

Hi All,
When I put the menu property for some form, the form shows this error:
cannot read from menu file
How to solve it?

Make sure the Forms exists in OS PATH if u r calling without the complete path like \\appserver\forms\Myform.fmx
put \\appserver\forms in ur PATH
also check
Check the calling form spelling
Baig,
[My Oracle Blog|http://baigsorcl.blogspot.com/]

Hi, I godt 2 Questions: 1) My Adobe PhotoShop Elements 10.0 for MAC cannot read the RAW files taken with the new Canon 7D Mark II camera. 2) My Photoshop Elements has changed from the danish language to german language, how do I put this back ?

Hi, I godt 2 Questions: 1) My Adobe PhotoShop Elements 10.0 for MAC cannot read the RAW files taken with the new Canon 7D Mark II camera. 2) My Photoshop Elements has changed from the danish language to german language, how do I put this back ?

You're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you want:
https://forums.adobe.com/community/photoshop_elements/content

I just bought the new PowerShot G1X. Aperture cannot read the raw files. Is there a fix for this?

I just bought the new PowerShot G1X. Aperture cannot read the raw files. Is there a fix for this? I am using Aperture 3.2.2 with a MacBook Pro.

I don't know -- sorry. I don't think it matters -- once your camera is supported, you can easily force a re-processing of the Masters. If you can import them as RAW+JPEG pairs, I would. Set the JPG as Master until Aperture can convert the RAWs.
I don't use RAW+JPEG. Can someone who does offer some suggestions .
(Added:)
And _always_ back up your files. In this case, if you have to, you'll be able to re-import them.
Message was edited by: Kirby Krieger

[warn] mod_bonjour: Cannot read template index file '/System/Library/User Template/English.lproj/Sites/index.html'.

Operating System: Lion 10.7.5
I was getting this warn in the logs
[warn] mod_bonjour: Cannot read template index file '/System/Library/User Template/English.lproj/Sites/index.html'.
and looking to the System directory on;
System/Library/User Template
User Template was locked and onwned by the System.
I went to the terminal and type;
sudo mkdir "/System/Library/User Template/English.lproj/Sites/"
sudo touch "/System/Library/User Template/English.lproj/Sites/index.html"
re-started Apache
The warn went away gracefully

I am adding here that this seems to be a permissions bug since the "User Template" is owned by the system and no one else have access to it. The warn went away temporarily because the permissions still wrong in that directory. I changed the permissions on the User Template directory to read and see what is inside and it loops to the user system structure. Most of the directories in the system structure are locked leaving only the public and sites directory with the correct permissions. Inside of the sites folder have a blank index.html file with read access.
So I am not sure if what I did until now will resolve the warn issue.
What I did was to get info on the User Template directory, authenticate as root and change the permission to the admin to read only. That is harmles since not even the admin can change its content. The warn seems to have gone away for now. However, the point here is to find out if the permissions should be read and write for the admin instead of read only or some other conf. More latter!

Suddenly my Nikon Coolpix will not upload onto my 09 iphoto it takes for ever then it just shows blank squares no pics and a message that states it cannot read the JPEG files. Can anyone help me, please.

Suddenly my Nikon Coolpix will not upload on to my 09 iphoto it takes for ever then it just shows blank squares no pics and a message that states it cannot read the JPEG files. Can anyone help me, please. I have never had this problem before.

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
You could also try reformat the Card with your camera
Regards
TD

WARNING: Cannot "Read or Write" files on iPod

My iPod has been behaving very curiosly as of late. For the past month a wanring has flashed up on my iTunes screen when attempting to sync music files. The warning says *"Cannot read the disk 'iPod'. Unable to read or write files"*. Despite this warning my iPod has been able to update daily podcasts without issue. However, when I recently purchased new music I could not get it to sync to my iPod. I have no problem listening to this new album in my iTunes library, but it just will not sync to my iPod. I created a playlist for it and attempted to add it, but I discovered that the iPod was not syncing the playlists either!
In a recent attempt to remedy the problem I selected only to sync the playlist that had the new album. What happened was frightening. All my music was no longer on the iPod, with the exception of my podcasts! I tried altering the settings to return all the music, but now I am unable to add any of my music from the library.
I am wondering if anyone has experienced this difficulty before, and if so, if they have any trouble shooting techniques. I have already been ti Apple's support page and completed the 5 recommended steps, to no avail. Any suggestions or thoughts as to what might be occuring.

Luckily, backing up your itunes library is easy. Just duplicate the folder(s) with your music in it. (Most likely, it's user/Music/ITunes.) Once the copy is made, you might want to move it to a different part of your hard drive.
Now, restoring your ipod WILL wipe the device. If there's anything on your ipod that isn't in your itunes library (unlikely but possible), you want to make sure you've got a copy of it somewhere before restoring.
Before restoring, check to see if there is an update to the ipod's firmware that needs to be installed. This is a "longshot" but might help. Just click the "check for update" button on the ipod's "Summary" pane in itunes. (Current version is 1.2.3, I think).

WSIL-Servlet cannot read existing WSDL-Files

I've posted this question before in the adapters-forum, but the longer i think over it, i am sure that it belongs to this forum. So i'd like to apologize for cross-posting this one.
I've installed SoaSuite 10.1.3.3 and OracleAdapters 10.1.3.1 with the SAP/mySAP-Adapter. I configured a jca-Connection to an existing SAP-Applicationserver. I was able to publish BAPI_COMPANYCODE_GETLIST as a webservice. Executing it using http://hostname/iwafjca/service.jsp also worked fine. I was also able to configure a BPEL-Process in jdeveloper with an invocation of the Service and deploy it to the SoaSuite-Applicationserver. I also was able to execute that process with the desired result.
But since i restarted the SoaSuite the execution within the BPEL-Engine no longer works. The same is with the Service-Explorer inside jdeveloper: When i open the according Adapter-Services-Node and go down to <connection-name> > adapters > applications i only find "Exception: No services found". The iwafjca-URL still works. I've searched through some Logfiles and found the following Lines in $ORACLE_HOME/opmn/default_group~home~default_group~1.log:
2007-12-10 14:52:22,098> <INFO> <collaxa> <ServerManager::loadProcesses> Done loading processes for all domains
<2007-12-10 14:53:25,638> <DEBUG> <default.collaxa.cube.ws> IN X WSIL Registry the url /adapters/applications/BAPI_COMPANYCODE_GETLIST_invoke.wsdl
<2007-12-10 14:53:25,638> <DEBUG> <default.collaxa.cube.ws> string processing url /adapters/applications/BAPI_COMPANYCODE_GETLIST_invoke.wsdl
<2007-12-10 14:53:25,638> <DEBUG> <default.collaxa.cube.ws> the start key 0the end key 9
<2007-12-10 14:53:25,638> <DEBUG> <default.collaxa.cube.ws> Delegating to the browser with key adapters with url /applications/BAPI_COMPANYCODE_GETLIST_invoke.wsdl
<2007-12-10 14:53:25,638> <DEBUG> <default.collaxa.cube.ws> IN X WSIL Registry the url /applications/BAPI_COMPANYCODE_GETLIST_invoke.wsdl
<2007-12-10 14:53:25,638> <DEBUG> <default.collaxa.cube.ws> string processing url /applications/BAPI_COMPANYCODE_GETLIST_invoke.wsdl
<2007-12-10 14:53:25,638> <DEBUG> <default.collaxa.cube.ws> the start key 0the end key 13
<2007-12-10 14:53:25,638> <DEBUG> <default.collaxa.cube.ws> Delegating to the browser with key applications with url /BAPI_COMPANYCODE_GETLIST_invoke.wsdl
<2007-12-10 14:53:25,638> <DEBUG> <default.collaxa.cube.ws> string processing url /BAPI_COMPANYCODE_GETLIST_invoke.wsdl
<2007-12-10 14:53:25,638> <DEBUG> <default.collaxa.cube.ws> the start key 0the end key -1
<2007-12-10 14:53:25,638> <DEBUG> <default.collaxa.cube.ws> Sub dir null
<2007-12-10 14:53:25,638> <DEBUG> <default.collaxa.cube.ws> processURL BAPI_COMPANYCODE_GETLIST_invoke.wsdl
<2007-12-10 14:53:25,638> <DEBUG> <default.collaxa.cube.ws> >>>>><<<<<<<< Fiel name BAPI_COMPANYCODE_GETLIST_invoke.wsdl
<2007-12-10 14:53:25,638> <DEBUG> <default.collaxa.cube.ws> >>>>><<<<<<<< Trying to read the wsdl file stored at:null\BAPI_COMPANYCODE_GETLIST_invoke.wsdl
07/12/10 14:53:25 java.io.FileNotFoundException: null\BAPI_COMPANYCODE_GETLIST_invoke.wsdl (Das System kann den angegebenen Pfad nicht finden) (on english something like: System cannot find the Path specified)
07/12/10 14:53:25 at java.io.FileInputStream.open(Native Method)
Apparently the URL, which the WSIL-Servlet uses is null instead of something like http://servername/.../.
Does anyone know about this error and can point me out what to do to 'persist' the WSDLs within the WSIL-Servlet?
Thank you very much
Magnus

Did you try to redeploy all your projects. somehow some files from your project are missing. ( at this moment I haven't got an explanation for this ).

Cannot read certain PDF files....

Hi
I have downloaded some bus timetables (only a few pages each and some just one page) and they can be read easily by my Samsung phone and my home PC
But in the Playbook I just get a black screen
The Playbook however seems to read other PDF files easily
So what am I doing wrong ....?
I would appreciate any thoughts / advice please
Thanks !
Peter

Thanks for that.
Tried that and I got the following message in of the open pdf files
ERROR undefined
OFFENDING COMMAND eexec
STACK
/quit
-dictionary-
-mark-
On another file it was a grey screen and it could not be swiped to the next page
Does that mean anything to you ?
Thanks !
Peter

TS3697 iTunes 10.6.3.25 cannot read certain TIF files

I was forced to upgrade to the latest version of iTunes because I bought a new iPod Touch 4g. I also own an iPod Touch 2g, which did not require the latest version of iTunes to sync.
About half of my photos could not be synced in the latest version of iTunes, although the previous version had no trouble reading and syncing the same files to my old Touch.
I contacted Apple support, which not only did not help, but failed to call me back as promised after suggesting a procedure that would take at least 45 minutes to complete.
I wound up solving my own problem eventually. What I discovered was that for unknown reasons, this version of iTunes could no longer read certain TIF files created in Paint Shop Pro. The solution was to resave all the files using Photo Shop Elements. I made no changes to the files and saved in the same format, but suddenly iTunes was able to read them and sync to my iPod Touch. (As suggested elsewhere on these forums, I did have to remove the photo cache to get this to work. However, just removing the photo cache did not work; I had to resave the files first.)
Beware, apparently a TIF is not necessarily a TIF! I have no idea what the difference is between the Paint Shop Pro TIF and the Elements TIF. Elements did not have any trouble reading them. Maybe Apple could address this problem in an iTunes update? It is very inconvenient to have to change my workflow to get my Touch to sync my photos.

Not in a Public forum
If you have access th Beta then you should be in the Developer Forum and posting there not here

Audit Vault agent on another server cannot read OS audit files on source

We have very highly secured database running on node1, we don't want to install agent on that server, so we installed it on node2. We want to use OSAUD collector to audit sys operations. But OSAUD collector is failing because it cannot read audit_trail_dest folder on the source database, network admins don't want to enable SSH from node2/oracle to node1.
Please suggest what are the options I have in this case.
I appreciate your help.

Thanks for the clarification on versions and architecture. In the future do not use the term "node" unless you are referring to RAC as it will cause very substantial confusion. You don't have two nodes ... you have two servers.
Throw it back at management. Ultimately they need to decide whether enabling secure communications makes sense in an environment where they wish to implement Audit Vault's very considerable capabilities.
I think your network admins need to be sent off to a re-education camp. One that reminds them that their purpose is to support the organization. I doubt your business model shows substantial revenue generation from network administration.

Pages cannot read or save files to MobileMe?

Similar Messages

Maybe you are looking for