Pages conversion goofed

Ok, I updated my 09" pages a long time ago. The template I'm using is an 09'. The 13' update isn't letting me delete a single page in a section. I've tried a few ways, converting back to 09' version exporting to word. It's fustrating.... I just need to know how to work within a section or how to make a secton border (yellow line) go away. 

Don't double click, Right click on the file when you open it and open it with Pages '09 not Pages 5.2.
If it tells you that you have to update to open the file then you have saved it as a Pages 5.2 file.
You can Export it back from Pages 5.2:
Menu > File > Export > Pages '09
Just viewing the invisibles is not enough you have to locate whatever is pushing over to the blank page and delete it. It is there, maybe under something else.
Nevertheless Pages '09 is the better option. Pages 5.2 is a real PiTA.
Peter

Similar Messages

  • HTTP-Receiver: Code page conversion error from UTF-8 to ISO-8859-1

    Hello experts,
    In one of our interfaces we are using the payload manipulation of the HTTP receiver channel to change the payload code page from UTF-8 to ISO-8859-1. And from time to time we are facing the following error:
    u201CCode page conversion error UTF-8 from system code page to code page ISO-8859-1u201D
    Iu2019m quite sure that this error occurs because of non-ISO-8859-1 characters in the processed message. And here comes my question:
    Is it possible to change the error behaviour of the code page converter, so that the error will be ignored?
    Perhaps the converter could replace the disruptive character with e.g. u201C#u201D?
    Thank you in advance.
    Best regards,
    Thomas

    Hello.
    I'm not 100% sure if this will help, but it's a good Reading material on the subject (:
    [How to Work with Character Encodings in Process Integration (NW7.0)|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42]
    The part of the XSLT / Java mapping might come in handy in your situation.
    you can check for problematic chars in the code.
    Good luck,
    Imanuel Rahamim.

  • Regarding code page conversions

    Hi ,
    I have a query on code pages in unicode evironment.
    first of all sorry for big mail on my question
    There were a couple of issues when we have upgraded from 4.7 to 6.0 . These issues were mainly in the code page conversions from one code page xxxx to yyyy and the dataset transfers.
    the problem which im facing is trying to understand  exactly what is this code page doing in the back ground  and these multilingual conversions all about .
    there is a custom code page that my client has made in his landscape and now in majority of the interfaces we need to handle the code based on this code page .
    for ex in the open dataset statement we add legacy text mode code page p_code ignoring conversion errors message lv_message .
    i see some of  the characters especially scandinivian korean chinese and japanese giving some major problem during the file transfers to unix and ftp environment .
    case 1.
    now we are referring to a custom code page 9xxx . now take a character as ä  , now when i write a transfer statement
    with referene to this code page it is displaying as #  in unix path.
    now taking the hexa decimal value of this character if i search in the custom code page (tcode scp with the hexa value of such characters )  there is a value already present  in this code page  9xxx, now when i have a value maintained why am i gettina a #  in the unix server .. how to check the consistency /validity of this code page 
    case 2.
    some hungarian characters like o with a tilt on top cause conversion error dumps during the transfer . again the code page has this hexa value in it .
    why in this case  the conversion from 4102(basically utf-16)
    to code page 9xxx is failing . why it is calling 4102 in this case ?
    ignoring conversion error bypasses this strange chars (cxsycodepage*dump)  but how to hold the correct value at any point of time in the desired server i mean at last i need to transfer o with a tilt instead of a # .
    Please give some in depth  work around solution instead of some vague answers .
    Will appreciate your effort and time for this .
    Thnx much .
    Br,
    Vijay.

    hi
    I am facing same problem when reading the file from application server.It gives me short dump.Can u tell me how can i resolve the code page error issue.In dump analysis i am getting error "NOt able to covert code page '4110' to '4102'

  • Code page conversion

    Hi
    I have requirement to pick up UTF 7 files. In sender FCC i have used code page conversion bean. But the adapter is not accepting UTF 7 format. What could be another option.
    I am using a 3rd party adapter (XLink adapter) and the error is occurring here itself.
    Thanks

    Hi pratichi,
    You can develop a module which converts the file content from UTF-7 to UTF-8 o other enconding which be valid for your adapter.
    This module must called before the your adapter module.
    Regards
    Ivan

  • Basis Code Page Conversion

    Hi everybody,
    Can anyone know that any training program on "Basis Code Page Conversion for Upgarding SAP using AS/400" is going to be held. If u know regardting this, please help me in attending the training.
    Please help on this.
    Thank you

    Hi Cristian,
    Take a look to f.m. TRANSLATE_CODEPAGE_IN.
    It uses class cl_abap_conv_in_ce. I don't know how it works, maybe you can find any idea useful for your pourpose.
    Regards.
    Andrea

  • MS Word to Pages Conversion Issues

    Hello, I recently added the MS Office software (PowerPoint, Word, etc), and I'm having issues with converting back from MS Word to Pages. The document will convert from Word to Pages, but when I open it in Pages the font has changed and there are weird symbols in place of words. I actually prefer using Pages to write and edit my documents....
    Please help! Thank you!

    Yes, but the issue is that as long as I have Word on my computer, the documents that were once Pages documents are now in Word. Even when I reset the 'default' back to Pages, what the documents were orginally created in, the documents don't properly convert back to Pages. So, I'm wondering if I remove/uninstall MS Word all together if that will look after the problem...

  • Word doc with excel table to pages conversion

    Help!
    Im a new Mac user and am trying to convert a word doc to pages.  The stumbling block is that the word doc has an excel spreadsheet in it and pages converts this to a text box rather than a table.

    .cwk (Claris Works) covers several types of documents, now openable by several applications so I do not think you can do that automatically, you must export them in Claris/AppleWorks, then import them in apps of the younger generation. Pages can open, I think, only cwk files created as word processing in AW 6.x.x

  • Code Page Conversion Error

    Hi,
    I have a problem while downloading a file which is generated by a standard report program. The R/3 server runs on UNIX and the target system for the file download is Windows XP. When i try to download the file an error is displayed - 'Individual characters could not be converted from code page 4102 to Code P.1100'
    Also when i see the file contents using the display option, all the characters are non-english characters (>> >>>>>>>>>††† etc)
    Could some one help?
    Thanks in advance,
    Sandeep Joseph

    Hi,
    I set a parameter(DCP(Default Code Page)) in the system and gave the value as 4102 and now it works fine. Can anyone tell the reason why it was going wrong?
    Thanks,
    Sandeep

  • Code Page Conversion from 4110 to 4103

    Hi,
    I'm getting a short dump at the execution of the statement READ DATASET. The short dump says a character was found that cannot be displayed in one of the two codepages.
    I have used a standard SAP Program which converts the code pages ( RSCP_CONVERT_FILE ). Unfortunately this program also short dumps when i specify the source as 4110 Target 4104 and the filename on application server.
    I've tried using NON UNICODE addition but have realised that it's not the proper way of doing it in a Unicode System.
    The Problem is with one special symbol " in the flat file. This symbol is not get recognised by the program and this is getting identified as # when i see it during debugging.
    Please help me in this regard.
    Kindly do not send me the documentation on OPEN DATASET and READ DATASET i have read that several times.
    Thanks,
    Sai

    Sorry for posting in the wrong forum

  • IE and ActiveX solution - Page conversion tool for Flash

    To all Web Developers,
    We have written a handy web based tool to automatically
    convert your web pages so they no longer display "Click To Activate
    And Use This Control" over Flash content.
    Please visit
    http://www.microsoft-activex-solutions.co.uk
    We hope you find it usefull. Any feedback is welcome.

    I can't belive the amout of hassel that Microsofts change has
    caused us web developers. This Tool is the BEST SOLUTION to the
    problem short of Microsoft making there browsers to work like the
    rest do.
    This tool will save hours of work going through every page.
    Please contribute a donation to the this tools development.
    Thanx

  • Any Word to Pages conversion apps?

    Finally made the switch to iWork.
    Are there any apps I can use to quickly and easily convert hundreds of old Word docs into Pages docs?
    Thanks.

    I tried it, not so lucky.  To answer Csound1-- I have both pages 09 & the newest version loaded.  I tried to open from within both versions

  • Code page conversion for chinese characters

    Hi,
    we receive an XML via JMS sender adapter where the code page in the Sending MQ system is cp850.
    One tag we receive contain chinese characters but are encoded as below
    <FAPIAO><Title>马么</Title><Remark>*æ¤，波特肉*</Remark></FAPIAO>
    We have tried the messageTransformBean in the sender JMS adapter to convert into UTF-8, but that gives no change.
    If we use some other code page, BIG5 some of the characters are converted to chinese characters, but we need to have it as UTF-8.
    Is this possible or do we have to use some other codepage?
    Best Regards
    Olof

    Olof Trönnberg wrote:
    Hi,
    we receive an XML via JMS sender adapter where the code page in the Sending MQ system is cp850.
    One tag we receive contain chinese characters but are encoded as below
    <FAPIAO><Title>马么</Title><Remark>*æ¤，波特肉*</Remark></FAPIAO>
    XML has to be transported as binary always.
    Remove the encoding parameter in comm. channel.
    Besides: obviously this is UTF-8, so how can you say, the code page of the sending system is cp850?
    It seems, that you have a wrong information.

  • Pages conversions unreadable i some machines

    I like Pages very much and have been using it as my only word processor for several months. I recenty started a new job which requires me to send documents to some 85 people, all using PCs. I send them either PDF or DOC files converted from Pages. Some people can't open one or the other, or neither. According to them, the files arrive with the extesions .pdft or .doct. Can someone suggest a fix?
    I would tell them to associate these files with Adobe Reader and Word, but most would not know how to do it. It would be much better to get rid of the "t".
    Thanks for your help!
    JAMM

    Hello
    I don't thought to someone but to something, a wrong interpretation of the doc ID.
    Often I received documents with AppleWorks identifier which in fact where Stuffit ones and, as I was the sender, I am sur that I sent Stuffit files.
    My guess is that you asked Pages and/or the Finder to not add the extension name which force the system of your correspondant to add the ext by itself doing that wrongly.
    If I am right, ask Pages to add the extension (which is for sure the preferred setting).
    Yvan KOENIG (from FRANCE dimanche 17 février 2008 11:44:23)

  • Add'l Front Page conversion help

    I have read the discussions concerning the steps needed to
    convert a Front Page website to Dreamweaver 8 website, especially
    the one from "ACE". After going through the tutorials though I have
    defined the remote server where the front page site resides and
    also a folder or place holder on my PC's hard drive to hold it. How
    is it (the website) copied? I see that dreamweaver has touched the
    front page site in that in a viewer mode "slideshow" works.
    I tried exporting the site to an area but in looking at the
    size I realize that the whole site was NOT exported. In reviewing
    the article from ACE he suggests downloading the whole site which I
    have done.
    Can someone give me some guidance. Many Thanks

    In DW, connect to the remote site. Expand the Files panel.
    Select all the
    files in the Remote site and GET them.
    You now have the whole site in the local folder and can edit
    them in DW.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "masnee" <[email protected]> wrote in
    message
    news:f2btlc$m01$[email protected]..
    >I have read the discussions concerning the steps needed
    to convert a Front
    >Page
    > website to Dreamweaver 8 website, especially the one
    from "ACE". After
    > going
    > through the tutorials though I have defined the remote
    server where the
    > front
    > page site resides and also a folder or place holder on
    my PC's hard drive
    > to
    > hold it. How is it (the website) copied? I see that
    dreamweaver has
    > touched
    > the front page site in that in a viewer mode "slideshow"
    works.
    >
    > I tried exporting the site to an area but in looking at
    the size I realize
    > that the whole site was NOT exported. In reviewing the
    article from ACE
    > he
    > suggests downloading the whole site which I have done.
    >
    > Can someone give me some guidance. Many Thanks
    >

  • Pages conversion problem

    I converted a Pages document to Word and sent it to a Gmail address. It was received as a DAT file which couldn't be opened. Can anyone suggest a solution?

    Thank you for your reply. Did you look at your received email using Outlook or did you log in to your Googlemail account?
    I did exactly the same as you and sent the email with attached .docx document to my Gmail address on my laptop. It arrived in my inbox with the attachment as a DAT file that I couldn't open or save. When I sent it back to the iPad it was received as the .docx file. I then logged in to my Gmail account on the laptop and had a .docx attachment on the email. It looks like it could possibly be an issue with Gmail and Outlook and the handling of .docx files. I have looked everywhere for an answer to the problem but couldn't find anything.

Maybe you are looking for

  • Can I activate the ethernet ports (routing) of Time Capsule "joining" an existing non-Apple wireless network ?

    Hello, I have a DSL modem that is also a WIFI router as my main WIFI network from room A. In room B, I have a TC wirelessly joining the existing WIFI network (not creating a new one). That works fine, I have one SSID, and I can wirelessly access the

  • IMac no video, fans and cd drive work?

    A friend asked me to take a look at his computer. It is an iMac, 24" display, model MA878LL. I plug the iMac in and press the power button. The fans run and I can insert and eject CDs but there is no video. I tried pulling the memory and resetting it

  • J_security_check question

    Hello, I am using form based authentication with j_security_check and everything works fine as expected. But, in my web application i have different different roles. How do i specify the success url for these different roles? I have only one login pa

  • TV Remote Control

    I'v been a loyal customer since 2011. I've payed probably over $1000 in equipment rental fees alone. And you want to charge me $15 to replace a 4-year old worn out remote?  That seems ludicrous.

  • SSL certificate error when installing

    Hi, We are getting error when installing the SSL certificate on our web dispatcher. Please see screenshot attached. Kindly assist us on this. Thank you! Regards, AJ