Pages: Documents not displaying in Itunes

I have several documents in my Ipad in Pages. But when I sync to Itunes, they are not displaying under the app. I want to shift drafts to my PC from Pages.
Is e-mailing really the only way?
As an aside, it's not a good app - downloading to the iPad, many times whole sections are omitted, for no obvious reasons.

As an aside to your aside .... You have to be using Word on your PC since Pages is not made for Windows. I'm not defending Pages at all - you will have compatibility and formatting issues going from Pages to Word and from Word to Pages. There are issues with Pages on the iPad to Pages on the Mac. I use Pages so I know from first hand experience.
The documents that I am creating are very basic and I don't have big issues, but still there ares some nonetheless.
At some point, you may want to look at an alternative to Pages - maybe Documents to Go.??? I use Pages, but from what I read around here, Docs to Go has better compatibility with Word files than Pages.... Just something to think about.

Similar Messages

Pages documents not displaying on ipad from mac

I'm trying to sync my pages documents between my mac and my ipad. I have verified that the icloud accounts on both are the same visually via prefs > icloud, on the mac, and via settings > icloud, on the ipad. While here I opserved that I had 4.99 GB of storage in icloud and that both devices were set up to sync everything from contacts down to documents and data. I then tested this by creating new notes from both devices and seeing if they synced to the opposite device. However, when I tried this with pages documents they are saved to icloud and can be viewed in my icloud account on my mac but none of them appear on my ipad. The only thing that I can guess is that the ios pages isn't cooperating with it's counterpart because the ios version was purchased under a different apple id.

I finally broke down and rebought ios pages under the current apple id. Problem resolved

Pages Documents not displaying correctly.

When I view Pages docs (via the dropbox app or via iDisk), the bottom of each page in the document is cut off. It doesn't paginate correctly.
In .pdf and .doc formats, the viewing is fine, but I don't want to have to save multiple versions of every doc.
Any solutions?

Figured out that you have to check "Include Preview in Document" to make it display correctly.
For some reason, even though I have "Include Preview in Document by default" checked in my preferences, it doesn't seem to do that.
A little annoying.

ITunesU pages do not display correctly, theme colors are missing ?

Our iTunesU pages do not display correctly, theme colors are missing ?

Having the same problem with our iTunes U page.

Jspx document not displaying in IE 6

Hello all
I am using JDeveloper 10.1.3.0.4 (SU4) to create JSF pages. To do that I use the standard Create Page wizards that popup when double clicking page icons in the faces-config diagram. Following the general advice I created jspx documents instead of JSP pages, but these pages do not display in Internet Explorer.
The error I get is
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
and then a message like
A string literal was expected, but no opening quote character was found. Error processing resource 'http://lxbakalidis:8988...
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" SYSTEM "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd" >
The pages created start like this :
<?xml version='1.0' encoding='ISO-8859-7'?>
<jsp:root xmlns="http://www.w3.org/1999/xhtml" xmlns:jsp="http://java.sun.com/JSP/Page"
version="2.0" xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:af="http://xmlns.oracle.com/adf/faces"
xmlns:afh="http://xmlns.oracle.com/adf/faces/html">
<f:view>
<afh:html>
<jsp:output omit-xml-declaration="false" doctype-root-element="html"
doctype-system="http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"
doctype-public="-//W3C//DTD XHTML 1.0 Strict//EN"/>
<jsp:directive.page contentType="text/html;charset=ISO-8859-7"/>
<afh:head title="About">
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-7"/>
</afh:head>
<afh:body>
<h:form>
Has anybody got any idea what's wrong ? The same pages appear to work just fine in Firefox 1.5 and Opera 9.
Thanks in advance
Thanassis

Hi again David
Looks like you may have misunderstood me. When I said "a
_skin.swf", I simply meant a .SWF that has the same name as your
project, but containing _skin.swf. Basically, the playback control
swf.
Sounds like you are using that file and still seeing the same
result. Oh well... I figured it was a long shot but was indeed
hopeful!
Yeah, it's always been a puzzler to me as to why it works
okay in FireFox but not IE. Go figure. Maybe it's just the way that
browsers work. I always thought it was because when you linked to
the raw .SWF, it all had to load up anyway before playback
commenced.
Hope you find something that works for you! Rick

JSP error page does not displayed on its own, includes in the original JSP

Problem Description: - Exceptions in a Condition cause pages to fail to render.
The actual issue is, the JSP error page does not displayed on its own, included in the original JSP Page when exception occurs.
Problem Cause: As per the JSP specification when jsp content reached the buffer size (default 8KB) the page being flushed (Part of condent displays). The default �autoFlush� value is true.
When the page buffer value is default size (8KB), and if any exception occurs after flushing the part of the content, instead of redirecting into error page, the error page content included in the original page.
If i specify autoFlush="false" and with default buffer size, at the runtime if the buffer size is reached, i am getting stackoverflow error.
To solve the above problem we can make it autoFlush=�false� and buffer=�100KB�. But we can�t predict the actual size of the page.
I found in one of the weblogic forum as no solution for this issue. Ref.
http://support.bea.com/application?namespace=askbea&origin=ask_bea_answer.jsp&event=link.view_answer_page_clfydoc&answerpage=solution&page=wls/S-10309.htm
Please provide me any solution to resolve the problem.

Error-Page tags work best with an error.html pages. If you have an error.jsp page what I would do, and I have, is wrap my classes and jsp pages in a try catch block where you forward to the error jsp page and display anything you want. YOu can also do this with if else statements. I have used the tomcat error pages before but when I've implemented them I used java.lang.Exception as the error to catch not Throwable. I don't know if this would make a difference or have anything to do with your problem.

CmcApp home.faces page will not display.

We have just completed (?) the installation of BOJ 3.1 XI SP 3 and the BOJ SAP integration kit SP 3. The installation is on SQL Server 2008 and SAP Netweaver 7.01 SP 7.
Each time after logging in the the CmcApp page using Administrator and the Enterprise authentication, the next page does not display. In IE8 a download window opens. In IE7 and Firefox the garbage is displayed. I have seen this thread: Re: CmcApp bug on BOE 3.1 using SAP WAS 7.0 and set *.faces to NEVER COMPRESS without any success. The thread just list is still marked as unanswered after a year.

Hi,
As per my knowledge, we need to do some changes in the application server configurations, in your case it is SAP Netweaver 7.01 SP 7 when BOE is deployed to the SAP NW Java server.
Try the below steps and do verify once again whether it resolves the issue:
1.     Launch the Visual Administrator tool.
2.     Connect to the SAP J2EE Engine by clicking Connect -> Login, select the appropriate connection, and click on the Connect button. Enter the password and click on the Connect button.
3.     Navigate to the HTTP Provider service by going to the Cluster tab, expanding Server, expanding Services, and clicking on HTTP Provider.
4.     On the right side of the screen, click on the Properties tab.
5.     Click on the AlwaysCompressed key. At the bottom of the screen in the Value field, remove "text/html" (without the quotes). Click on Update.
6.     Click on the NeverCompressed key. At the bottom of the screen in the Value field, add "text/html" (without the quotes). Click on Update.
7.     At the top of the screen, click on the Save Properties button.
8.     Restart the NetWeaver server.
-Noor.

Oem web page will not display after O/S dst patch

Hello,
The Grid web page will not display after we DST patch for the o/s.
All below start fine without any errors:
emctl start oms
emctl start iasconsole
opmnctl startall
emctl start agent
The Grid web page is not displaying. What might happened after the o/s dst patch that might cause this? Our GRID is 10204 with a 10104 repository. The 10104 has not yet been dst patch.
What logs should I be looking at to figure why the web page is not displaying? Thank you.

Provide the output of these comands:
$OMS_HOME/bin/emctl status oms
$OMS_HOME/opmn/bin/opmnctl status
$AGENT_HOME/bin/emctl status agent
$DATABASE_HOME/bin/sqlplus "/ as sysdba" << EOF
SELECT STATUS FROM V$INSTANCE;
EOF
$DATABASE_HOME/bin/lsnrctl status LISTENER_NAME
Regards

Some pages do not display correctly ofter install iobit malware

hi
ofter i install iobit anti malware,some page do not display correctly on my browser
i remove all addson of fire fox and reastart firefox but firefox not work true
It seems that the style of some web pages not working correctly
(if i find attach button , i attach web pages that not dispaly correctly)

Ok, then in that case, Try the steps at [[Websites look wrong or appear differently than they should]]

Does not display in iTunes -- How can I restore it?

I have not used my Nano for a while, and I upgraded to Leopard from Tiger since. I just plugged in my Nano and it briefly shows up in iTunes though it gives me a message that it was not properly disconnected and it disappears and in a minute or so it reconnects and disconnects again It keeps doing this.
I want to just restore it, though it does not display in iTunes long enough for me to do so. How can I restore it without being in iTunes?
Thanks.

You might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Patrick

Page is not displaying correctly on mobile

Hey. Can anyone help me to see why my page is not displaying correctly on mobile.
www.highestgoodclothing.com/phone/videos.html
The page displays correctly on a desktop.
On mobile there is a right margin that I do not want there. All of my other mobile pages seem to be working just fine. How do I fix this? Thanks

Hi,
I think it may be <div class="html5gallery-viral-0"> (contains the social media buttons) // screencasteu.worldsecuresystems.com/AP/2013-08-01_1033.png
It's the only element that isn't in sync with the other elements on page, when compared to home.html for example.
Kind Regards,
Alex Pavelescu

My ipad not recognized and not displayed in iTunes

Hello,
i have a problem with my ipad 1 16 GB Wi-Fi,
when i try to connect my ipad to my laptop, it nothing happend. its not displayed in itunes, nowhere. its not also beeping.
I also have problem to charge my ipad, when i plug it in to the electric connector, its showing that ipad is not charging (but i can see that is charging slowly)
but
i rty a diagnostic via itunes -> no connected devices found
i try to connect to another computer -> still same problem
i try to change a docking cable -> still same problem
i try restart all settings -> still same problem
i try to go to recovery mode to detect via itunes -> still same problem
now when I deleted all data in ipad, i can see only "connect to itunes)
what i can do now ? is there some apple diagnostic tool, or some special usb mode to get it work ?
please help me :-)
thanks Matt

I too have a problem with my ipad 1 16 GB Wi-Fi, when i try to connect my ipad to my laptop, I get devise not reconized and its not displayed in itunes, (no beeping). I try to connect to a mac pro and get nothing, I try to change a docking cable, still same problem, same problem with all pc's.
When I connect an ipod it is found and restored no problem.
I also have had a problem charging my iPad, when i plug it in to the an electrical outlet, its showing that iPad is not charging (but it does charge very slowly).
Problem is before I new I had a problem I restored the iPad, now all I have is a paper weight with "connect to itunes.
Is there any help ANYWHERE what i can do now ? is there some apple diagnostic tool, or some special usb mode to get it work ?

Notification Detail Page is not displaying

Hi All,
I have a requirement of creating a read only workflow admin responsibility. For that I have followed the below steps.
1. Set 'Workflow Administrator Web Applications' as the Workflow Administrator from administration tab.
2. Create a grant with the below details.
Grantee Type: All Users
Responsibility: Workflow Administrator Web (New)
Object: Workflow Items
Data Context Type: All Rows
Permission Set: Business workflow item permission set
I have done this for viewing the workflow owned by all users and followed the ID 1328447.1 for doing this.
Now everything is working fine, but Notification Detail page is not displaying. It is loading for a long time and
giving the errors, ('The connection was reset' in Mozilla and 'Page Cannot be Displayed' in IE).
Notification detail page will come when I remove this Grant, but it will display only the workflows owned by
that particular user. So this grant is a mandatory component for me.
The issue is there even for the admin responsibility(Workflow Administrator Web Applications) when assigning
this grant.
Can anyone help me on this to resolve this issue.
Thanks & Regards,
Charls

Hi Helios,
Thanks alot for replying. Below are the answers to your queries.
1. EBS Version : 11.5.10.2
Client Version: 11.2.0.1.0
2. Browser version:
IE: 7.0.5730.13
Mozilla: 14.0.1
3. I have tried it in different machines(4 machines). There also I am facing the same issue.
Hoping for your valuable comments.
Thanks & Regards,
Charls

Web certificates are unrecognized. Web pages do not display correctly.

Web certificates are unrecognized. Web pages do not display correctly.
Web pages post as mostly text but links do not work. for example youtube.com
Upload
Change
Creator Studio
Add account Sign out
Search
What to Watch
My Subscriptions
Music
What to Watch
My Channel
My Subscriptions 5
History
Watch Later 27
Playlists
More
Cars
Favorites
Bob 2
Robin
Liked videos
Subscriptions
Benz lu
This Connection is Untrusted
You have asked Firefox to connect securely to smf.crm.red.com, but we can't confirm that your connection is secure.
Same problem in Firefox.
Normally, when you try to connect securely, sites will present trusted identification to prove that you are going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to this site without problems, this error could mean that someone is trying to impersonate the site, and you shouldn't continue.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Facebook social plugin of fan page feed not displaying correctly after upgrading to Firefox 17

Facebook fan page feed not displaying correctly since upgrading to Firefox 17. Code hasn't changed, and it still displays correctly in Internet Explorer. In Firefox 17, the background has gone grey so that the text is no longer visible, and photos of fans are no longer displayed at the bottom. (Issues occur on both my Dell PC/Windows Vista and my MacBook Pro.) Please advise.
**Issue seems to have resolved itself; I guess plugin developers caught up with Firefox update.**

Facebook fan page feed not displaying correctly since upgrading to Firefox 17. Code hasn't changed, and it still displays correctly in Internet Explorer. In Firefox 17, the background has gone grey so that the text is no longer visible, and photos of fans are no longer displayed at the bottom. (Issues occur on both my Dell PC/Windows Vista and my MacBook Pro.) Please advise.
**Issue seems to have resolved itself; I guess plugin developers caught up with Firefox update.**

Pages: Documents not displaying in Itunes

Similar Messages

Maybe you are looking for