Pages doesn't show any page content.

I have pages 4.0.1, and it doesn't show any page content. How can I solve this?
Thanks

Pages 4.0.1 is very old & is likely the cause of your problem. You should be using Pages 4.0.4 in Snow Leopard. iWork '09 installed from the retail disk or from the downloaded trial must be updated through Software Update. If you're not running the latest versions of the iWork apps installed from a retail box or the downloaded trial & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. If you installed from the downloaded trial or the retail box, they must be in the iWork '09 folder in Applications. That iWork folder must be named iWork '09. If it doesn't have the '09 Software Update won't find them & the updaters won't work.

Similar Messages

Firefox Support forum web page doesn't show any text

All other web pages load perfectly except Firefox Support Forum. It shows only search box and some tag words. When I type into search box, nothing shows but when I hit enter I get only tag words that I typed. I've tried reinstalling FF and started in safe mode. Nothing fixes it. I've been trying to figure this out for months. I've tried Chrome and IE8. Evidently its not a browser problem. I'm using Vista Home Premium SP2. I'm sending this from my XP, no problem with it.

cor-el
fixed, thanks for your help with this.
Please advise if there is there any reason to be concerned about changing this from the default setting.

Aftre installing the update, fire fox doesn't open any pages.

aftre installing the update, fire fox doesn't open any pages.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Firefox doesn't load any page after a while.

I'm having problem with firefox while surfing after a while. For example at first 15 minutes , there is no problem , after a while firefox doesnt load any page , i have to close it and reopen it again to make it work. While firefox is not loading , i can use other browsers as normal. It just doesn't load any page at all but the program itself responds so I can close it with X button.What could be the problem , I'm using latest firefox.

The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
Try to decrease the value of the pref <b>network.http.max-connections</b> from 256 to 30 as used in Firefox 3 versions.
*https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites
See also:
*http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

Template splash page doesn't show up

This is a new installation of iWEB on my 17" iMac and the template page doesn't show up. I am unable to add a page or create a new site from this point. I have a 24" iMac and when I start iWEB the templates page displays OK. I have reinstalled the software on the 17" and the templates still do not show up.

Well, if you haven't installed iWeb 1.1.2 yet, don't just yet. What has solved this problem for people in the past is to actually download the full iWeb 1.1.1 updater image from Apple here...
http://www.apple.com/support/downloads/iweb111.html
Then install it right over the current installation. If you have already updated to 1.1.2, I don't believe you will be able to do this.
If you have already updated to 1.1.2, I think your only choice right now (until Apple releases a full updater image) is to delete your current iWeb installation and then reinstall from the recovery disks that came with the computer.
Let me know what your situation is and I can talk you through things more fully.

When I try to access my emails the screen opens but doesn't show any emails

When I try to access my emails the screen opens but doesn't show any emails

Tap to open a new tab and Private will be at the bottom left of the page. If it is active, tap to turn it off.

IPS MC: It doesn´t show any signature.

Hi.
I had IPS MC 2.1.0 (Build 123) functioning fine. I installed the idsmdc2.1.0-win-CSCsc336961.tar file in order to solve the CSCsc33696 bug. Next, I installed an update signature for IPS version 5 (But I didn´t has any IPS sensor version 5, I just was checking), but the update didn´t work. Afther it, I noted that I have a big issue: When I try to modify any signature, in the Settings->IOS IPS, it shows:
Object loading failed. Errors occurred while loading the Signatures. Not all signatures may have been loaded.
It doesn´t show any signature.
I erased all the sensors, including the IOS IPS. Then I import one of the IOS IPS and follow the instruction for the CSCsc33696 bug. I reimported the device, deployed configuration, disabled the IPS feature in the router and enabled the feature in order to load the signature configuration, but the issue persist. Then, I installed the newest signature update to IDS sensor version 4 (it includes IOS IPS update) and it installed without problems, but the problem in the sigature page perisist.
I reinstalled the IPS MC, but the problem persist. I uninstalled the IDS MC, and installed again without save the database. It shows the application IDS MC and Security Monitor without configuration, like a new installation, but the issue persist!!!
Someone had this problem? Someone know how can I solve it?
Thanks.

The Cisco IOS IPS feature restructures the existing Cisco IOS Intrusion Detection System (IDS), allowing customers to choose to load the default, built-in signatures or to load a Signature Definition File (SDF) called attack-drop.sdf onto the router. The attack-drop.sdf file contains 118 high-fidelity Intrusion Prevention System (IPS) signatures, providing customers with the latest available detection of security threats. For more information refer to following url:
http://www.cisco.com/en/US/products/ps5854/prod_configuration_guide09186a00802c9587.html

I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded

Here is a ticket regarding our current client web application ( Image data add, edit , delete in folder with form data in MSSQL Database) that using code c#, web form, ajax, VS2008, MSSQL Server2008 , it appears that there is an error where the HTTP
503 error occurs.
. Below is a conversation with Host Server support assistant.Can you take a look at it?
Ben (support) - Hi
Customer - We're having an issue with our windows host
Ben (support) - What's the issue?
Customer - 503 errors
Ben (support) - I am not getting any 503 errors on your site, is there a specific url to duplicate the error?
Customer - no, it comes and goes without any change Customer - could you have access to any logs ?
Ben (support) - Error logs are only available on Linux shared hosting, however with this error it may be related to you reaching your concurrent connections
Ben (support) - You can review more about this at the link \
Customer - probably yes - how can we troubleshoot ?
Ben (support) - http://support.godaddy.com/help/article/3206/how-many-visitors-can-view-my-site-at-once
Ben (support) - This is something you need to review your code and databases to make sure they are closing the connections in a timely manner
Customer - we're low traffic, this is an image DB to show our product details to our customers
Customer - ahhhh, so we could have straying sessions ?
Ben (support) - Correct Customer - any way you could check if it's the case ?
Customer - because it was working previously
Ben (support) - We already know that's the case as you stated the 503 errors don't happen all the time if it were issue on the server the the 503 would stay.
Customer - so our 2/3 max concurrent users can max out the 200 sessions
Customer - correct ?
Customer - is there a timeout ?
Ben (support) - no that's not a time out concurrent connections are a little different then sessions and or connections. Lets say for an example you have 5 images on your site and 5 7 users come to your site this is not 7 concurrent connections but 35. They
do close after awhile hence why the 503 error comes and goes. You can have these connections close sooner using code but this is something you have to research using your favorite search engine
Customer - thank you so much
Customer - I'm surprised that this just started a few weeks ago when we haven't changed anything for months
Customer - any changes from your side ? lowering of the value maybe ?
Customer - I'm trying to understand what I can report as a significant change
Ben (support) - We haven't touched that limit in years
Ben (support) - This could just be more users to your site than normal or even more images
Customer - I was thinking that could be it indeed
Customer - so I need to research how to quickly close connections when not needed
Ben (support) - Correctly
Ben (support) - correct
Customer - thanks !!
Ben (support) - Your welcome
Analysis :
The link provided tells us : All Plesk accounts are limited to 200 simultaneous visitors.
From what Ben (support) says and a little extra research, if those aren't visitors but connections then it's quite easy to max out, especially if the connections aren't closed when finished using. I'd suggest forwarding this to Kasem to see what he thinks.
Cheers,
Customer

Hi Md,
Thank you for posting in the MSDN forum.
>>
I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded.
Since
Visual Studio General Forum which discuss VS IDE issue, I am afraid that you post the issue in an incorrect forum.
To help you find the correct forum, would you mind letting us know more information about this issue? Which kind of web app you develop using C# language? Is it an ASP.NET Web Application?
If yes, I suggest you could post the issue directly on
ASP.NET forum, it would better support your issue.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Apple loops for garageband pack doesn't show the folder content (loops, files...) in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

apple loops for garageband pack doesn't show the folder content (loops, files...) in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

Thanks Barney, I tried that but all that comes up in Spotlight are the log files that show the file paths! I don't know how Steam works. Are all the files held by Steam on their server perhaps?

HT1688 I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content.

I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content. Any Suggestions?

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

BPEL Console doesn't show any instances created

Hi,
We are using file protocol to read the files from trading partner into B2B. File is successfully processes by B2B. I can see that in reports.
Then I have defined a BPEL process to Dequeue the messages from B2B using AQ Adapter, transforms and places the files in the local file system.
The BPEL process is simple flow with one receive , transform and invoke activity.
I have configured AQ adapter using WSIF browser. I can see the deployed document definition in browser.
I have the TP agreement deployed, BPEL process deployed, but I don't see the 850 file processed. BPEL Console doesn't show any instances created. How would I know where what went wrong?
Please help.

Try using java oracle.tip.adapter.b2b.data.IPDequeue to dequeue the message and see if you can dequeue
Then you'l be able to pin point if the issue is with your BPEL or with B2B Queue's
Kalyan

"Dependecies" tab doesn't show any information for a selected table version 4.0

Hello,
I work with SQL Developer 4.0.0.13. I can see 20 tables in the list. When I select one table, in the tabs on the right side I can see information for "columns" and "data" and "constraints" and "indexes"... but the tab "Dependencies" doesn't show any information about references between this table and other tables in the schema.
Oracle database is v11.2
Can you please tell me what do I need to do in order to see information on "Dependencies" tab for a table?
Thank you,
Milan

Hi, here is my example of XML extension showing referencing tables:
Save the following XML to a file.
<items>
<item type="editor" objectType="TABLE">
    <title><![CDATA[*Referencing Tables]]></title>
      <query>
        <sql><![CDATA[SELECT
cfk.owner "OWNER",
cfk.table_name "TABLE NAME",
cols.column_name "COLUMN",
cfk.constraint_name "CONSTRAINT NAME",
cfk.delete_rule "DELETE RULE",
'SQLDEV:LINK:' || cfk.owner || ':TABLE:' || cfk.table_name ||
':oracle.dbtools.raptor.controls.grid.DefaultDrillLink' "LINK"
FROM
sys.all_constraints cpk,
sys.all_constraints cfk,
sys.all_cons_columns cols
WHERE
cpk.owner = :OBJECT_OWNER AND
cpk.table_name = :OBJECT_NAME AND
SUBSTR(cpk.table_name, 1, 4) != 'BIN$' AND
SUBSTR(cpk.table_name, 1, 3) != 'DR$' AND
cpk.constraint_type in ('P', 'U') AND
cfk.r_owner = cpk.owner AND
cfk.r_constraint_name = cpk.constraint_name AND
cfk.constraint_type = 'R' AND
cols.owner = cfk.owner AND
cols.constraint_name = cfk.constraint_name
ORDER BY
cfk.owner, cfk.table_name, cfk.constraint_name,
cols.column_name]]>
      </sql>
    </query>
</item>
</items>
In SQLDeveloper select Preferences -> Database -> User Defined Extensions and click <Add Row>.
In the "Type" field enter "EDITOR" and in the "Location" field enter the path to the file with XML.
After restarting SQLDeveloper You should see a new tab "*Referencing Tables" for tables.

IPhoto app doesn't show any photos from my photos app

I just upgraded my new iPad to iOS 6 beta. Maybe that's the problem but suddenly my iPhoto app doesn't show any photos at all. All the tabs (albums, photos, events, etc) are empty. When I open the app it says "updating photo library" briefly, but that's it. I tried rebooting, deleting the app and reinstalling it, basically everything I could. Is this a known iOs6 bug?

Ok, I have the release and I have the issue, photos are just boxes w no pictures, is there a way to remove library and reload? The photo app works fine and all pictures are there.

Tools sync now doesn't show any progress bar???

I have created sync module for firefox.
But when i click on : Tools > sync now
Why it doesn't show any progress bar???
Firexfox team should look into this matter.
I love firefox.
Best Regards,
Jason Malaysia

Yup Okay..
But i'm now wondering, if it run background:-
Where does it update sync to?
Is it into my firefox account?
Where i can see my backup bookmarks?
Best Regards,
Jason Malaysia

Running Sync BPEL process doesn't show any HTML form /XML source for input

Hi
I designed,compiled and deployed SYNC BPEL process on to server
but when I opened console and try to run the process, it doesn't show any form for input
Actually it has to take input
Where I am doing wrong...?
Thanks for any help...

Hi Praveen,
That is correct, you're not doing anything wrong. The BPEL Console doesn't show any forms for testing the services if the service is synchronous.
I test my synchronous webservices with Eviware SoapUI. This is a freeware tool. Check: http://www.soapui.org/
Just create a new project in soapUI, create a new request from WSDL, copy and paste the WSDL in soapUI. It will generate a default request for you, which you can edit and execute.
HTH,
Bas

Pages doesn't show any page content.

Similar Messages

Maybe you are looking for