Pages doesnt let print or save documents on Mac newest version

My Mac just dont save, print, or share pages at all

Just letting us know?
Or is there something else to this?
Peter

Similar Messages

How can I print out a document on an '05 version of iLife (iWorkPages) es)

How can I print out a document on an '05 version of iLife that includes iWork? I want to make a document in Pages and print it. It tells me that I have to buy Pages, but doesn't tell me where to go to do that.

Assuminh your profile is correct that you are running OS X 10.5.8, you need the version of Pages from iWork 09.
Try to find the CD for it on eBay
Allan

Auto adjustment of page orientation causes printing issues with documents that have a page width greater than its page height.

Hi,
Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
documents that have a page width greater than its page height.
In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
This behaviour causes printing problems: the page prints out 90° rotated.
I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
Word 2010 seems to force the page orientation settings.
Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
This is very annoying, since we have to print official documents of a municipality (driver's licences).
Is there a workaround for this issue?
Regards,
Laurent Grandgaignage
Sysadmin Gemeentebestuur Stabroek, Belgium

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can follow these steps to test this issue
Step 1: Repair Office 2010
1.
Click
Start, and then click Control Panel.
2.
Click
Programs and Features.
3.
Click the
Office 2010 program that you want to repair, and then click
Change.
4.
Click
Repair, and then click Continue. You might need to restart your computer after the repair is complete.
Step 2:
Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
Windows Vista and Windows 7
a)
Exit Word 2010
b)
Click
Start.
c)
In the
Start Search box, type the following text, and then press
ENTER:
1.
%userprofile%\appdata\roaming\microsoft\templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
Microsoft Windows XP
a)
Exit Word 2010
b)
Click
Start, and then click Run.
c)
In the
Open box, type the following text, and then press ENTER:
%userprofile%\Application Data\Microsoft\Templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
f)
Close Windows Explorer.
How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
http://support.microsoft.com/kb/826845
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

Pages V5 COULDN'T AUTO-SAVE DOCUMENT error message

Why am I getting this error message when I attempt to save a document, duplicate a document, move a document--"Couldn't Auto-Save Document" I cannot save the document. I originally opened this document from the server computer to my laptop, made changes on the laptop at remote office and now I cannot save it, even to a new location on the laptop.

Hi.
I was just now suddenly afflicted by this problem.
Have new macbook pro retina - iOS X 10.9.2.
Everything is up to date.
Even Pages is up to date. checked it (of course), as soon as I started getting the error message every time I tried to save. Even tried saving or 'exporting' to Word, PDF...still same message.
Now...I recall that any time an app is 'acting up' (i.e. not responding the way it should)...it usually means that it either needs updating, or it has some sort of 'bug' to it.
If it needs updating...then simply update it. I checked that option...and got message that Pages is indeed up to date.
So...opted to simply 'force quit' pages (as well as quit many other still-open apps that I wasn't using at the moment...to try to cut down on excess memory being used...thinking that may be part of the problem.
Also...thought that maybe my hard disk was getting rather full...so opted also to move all my music, movies & pictures to an external hard disk to free up internal storage space (by eventually deleting all after first backing up to external hard disk)...and then of course finally freeing up all space by emptying the trash.
Then...after force quitting pages (and all other non-used apps at the time)...and still before completing the transfer of all those heavy files to an external hard disk...then I re-opened pages to test it...and 'WHOALA!"...it worked just fine!!!
So...it seems that this was the solution...at least for me at this moment...to simply force quit the renegade app, and then re-start it.
If that didn't work, I was going to simply shut down the computer...and do a complete re-start. That is another option that often times gives a new look to life for apps which are acting up.
OK...just thought to put in my two cents-worth here.
Hope this helps someone else.
Regards,
Balqees Mohammed.

Solution for printing of Purchasing Documents in SAP with version managemen

Hi experts,
We found that the standard solution does not meet the following requirements for purchasing document
1)     The print for the latest version of the document does not contain items unaffected by change. It requires printing of whole document with all items, but with version number and highlighted changes.
2)     The standard solution cannot highlight some of the changes which are not captured by version management like text changes, target value and Contact (Purchasing Group) in header, text changes at item level, etc.
3)     The standard solution can be used to reprint the whole PO without version management but that cannot highlight the changes specific to the version for which it is printed.
If any solution which can meet the requirements specified above, please let us know <removed by moderator>.
Thanks in advance.
Edited by: Thomas Zloch on Mar 30, 2011 9:39 AM

Ok.
I have already done with SPRO configuration.
MM->Purchasing->Version management->
It has implemented ECC 6.0. The version management has been activated for Purchasing documents. The standard printing solution for printing of these documents (PO, Outline Agreements and RFQ) print these documents with changes made in the latest version. Any item which is not changed in the latest version does not get printed.

Pages 5.0 will not save documents created in Pages 09

I have hundreds of important documents I created and saved in Pages 09. I got a new Mac Mini running Mavericks 10.9.5 with the new Pages 5.0. The new Pages will not save my Pages 09 documents. Pages 09 will not save them either. Help!

1. Is it possible you installed from a demo installer and your 30 day trial period is up, when it goes into Read Only mode?
2. Where and what was your purchased disk?
3. Where are you saving to?
4. Have you tried saving somewhere else eg an external hard drive and see what happens then?
5. The auto-saving issue with Pages 5.2.2 could be problems with iCloud and online access.
Peter

Cannot get Pages to let printer manage the color

This is actually a Pages '06 issue, but the Pages'06 discussion is closed so I could not post this question there.
I am leaving out a lot of hsitory to be as brief as possible, but I will say this much. I did have Leopard installed, but this OS X had an issue with Painter X so I removed Leopard and re-installed Tiger. There is a documented conflict with Painter X that Apple and Corel have not been able to rectify. I use Painter to put beans on the table, so I had no choice but to re-install Tiger. Whether this is the cause of my problem, I do not know. Here is my current dilemma.
All of my Pages prints use to print perfectly. Now, no matter what I do, they are flat and dull. I would like to use my ICC Color Profiles to manage my color rather than allow Pages to color manange.
To be clear all of my ink cartridges are fresh and all printer nozzles are clear. Many tests have been run on my Epson R2400 and none have shown any problems whatsoever.
What I believe may be the problem here is that in the Print / ColorSync /Color Conversion pull-down menu, 'Standard' is my only choice. 'In Printer' is the only other option, but it is grayed out, unselectable. The Pages manual states that:
'Standard: Uses the default settings in Pages ...
'In Printer: Lets the printer ... control color management ...
Does anyone know what may be a solution to making 'In Printer' selectable?? Am I overlooking something? I could almost print in Pages with my eyes closed and get perfect prints every time. But that has all changed for some reason.
Pages'08 does not even have a ColorSync option in its print menu which gives me pause to wonder, but if anyone has a suggestion about using Pages'08 and my problem, then I all ears. In addition, the Pages'08 manual does not even have printing instrctions, so this was no help either.
Any help or suggestions will be greatly appreciated.

There is a documented conflict with Painter X that Apple and Corel have not been able to rectify. I use Painter to put beans on the table, so I had no choice but to re-install Tiger.
OK, if you are using the ICC architecture for a living, and if you have a problem with a file format / application, you need to talk to the Apple ColorSync Users List.
What I believe may be the problem here is that in the Print / ColorSync /Color Conversion pull-down menu, 'Standard' is my only choice. 'In Printer' is the only other option, but it is grayed out, unselectable. The Pages manual states that:
'Standard: Uses the default settings in Pages ...
'In Printer: Lets the printer ... control color management ...
This is incorrect. The correct interface information is, "In Printer: Lets the PostScript interpreter control colour management". You do not have a printer with a built-in PostScript interpreter, so the system computes the colourant conversion. Hence, In Printer is grayed out.
Does anyone know what may be a solution to making 'In Printer' selectable?? Am I overlooking something?
Sure, buy an Adobe CPSI (Configureable PostScript Software Interpreter) running on a Mac server or Windows server, or but one that comes as an embedded controller in a colour printer, and you can use the command 'In Printer'.
Pages'08 does not even have a ColorSync option in its print menu which gives me pause to wonder,
Thankfully, since Pages should not have its own ICC API, but should be a client of the system in general and the ColorSync Utility in particular. What Pages does not have is object-level ICC source profile assignment, and object-level rendering intent settings.
You can get this, but if you make a mistake, you kill your colours. For instance, if you select Absolute Colorimetric as rendering intent, you match the white point of the source colour space into the graybalance and clip the lightness linearly to the lightness of the printing condition.
By hiding rendering intent settings, you get a fairly foolproof situation.
In addition, the Pages'08 manual does not even have printing instrctions, so this was no help either.
Printing instructions are the property of the printer manufacturer who plugs a printer driver into the system. What you can argue, and many would agree, is that configuration of the ColorSync Utility and the Display control panel is underdocumented. But that in itself is a bit of a job.
/hh

Why does pages suddenly deny permission to save documents?

Pages worked beautifuly for several months, but suddenly began denying permission to save either text documents or texts w/attachments. I have not changed any settings or programs and therefore do not know how to remedy the situation that suddenly developed.

Have you done any system updates lately? Using Disk Utility to repair permissions after system & software updates is a good practice. Deleting the Pages preference file is a good troubleshooting step. Go to (your account) > Library > Preferences & delete the com.apple.iwork.pages.plist & restart Pages. The door to the user's Library is hidden in Lion but it is easy to open. In Finder, hold down the Option key while clicking on the Go menu & your users Library will appear about halfway down the list.
To make it easier for others to help, please include your profile with OS X version with your posts. It also helps to include the version of specific software if that's what your question is about.

I can't select just one page number to print from a document. It prints the whole document.

how do i print one page out of several pages?

If the PDF page content is an image (for text that'd by the image that any scanner provides) then it is an image that exports to Word.
Regardless, Adobe Reader cannot export PDF page content, cannot create PDF and cannot manipulate PDF page content.
Adobe Reader is a PDF viewer only.
Perhaps you have a subscription to one of Adobe's online subscription services.
(ExportPDF, PDF Pack, etc.)
Each of the online subscription services have their own dedicated user-2-user forums.
Easy find as there here in Adobe's Forums. Hmmm, just dumping somewhere means ... Ah well, won't go there. Miss Manners would not approve eh.
Resources for getting into a dialog with Adobe:
(other than the user-2-user forums)
~~~~~~~~~
To contact support for acrobat.com subscription services:
https://www.acrobat.com/misc/en/contact-support.html
Other links to support:
http://helpx.adobe.com/contact.html
http://helpx.adobe.com/support.html
contact Adobe Customer Care on Twitter @AdobeCare.
Phone support (for a fee - have credit card ready)
800-833-6687, Mon - Fri, 5AM - 7PM PT
Be well...

Is there an "AppleWorks" application that opens Appleworks documents on Mac OSX Version 10.8?

Ciao All,
Does anyone know of a "Appleworks" application I can download that will open all of my old Appleworks documents on my new OS X 10.8 computer? How about "Word" Documents.
Thanks,
Danny Mac

Appleworks 6.2.9 running in Snow Leopard Server installed into Parallels 8 for use in Lion or Mt. Lion:
[click on image to enlarge]
Apple is now selling Snow Leopard Server for $19.99 + sales tax & shipping costs at 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only).

Prints too dark - Aperture and Lion (newest versions)

Hi - relatively new to Macs and Aperture (Windows/Lightroom user).
I have been trying to get decent (meaning not so dark) prints. I have calibrated the iMac 21.5" using a ColorMunki Display and print to an Epson Artison 835 using the Epson ICC profiles.
And no matter what I print from (Aperture, iPhoto and Photoshop Elements 10) all the prints are dark - like they are underexposed by 1-2 stops.
First I thought it was an Aperture problem but then saw almost the same results from the othe two programs.
I then did the monitor calibration using ColorMunki Display - and to be honest there was not a big difference in the brightness, a slight difference in the color cast.
But the prints are still coming out dark.
Any suggestions please????
Steve

This comes up frequently, regardless of equipment or software. Since you have the same result outside of Aperture as inside Aperture, the problem is not being caused by Aperture.
There are many things to check for. This post will give some ideas. After confirming that all software (including drivers) is up-to-date, the first things I'd look at are your luminance setting for the calibration (I use 85, but this -- like almost everything -- dependent on your work environment), and the display preferences for your monitor. See also this post.

Can't Print or Save in Adobe Acobat Reader DC

I was using an older version of Acrobat reader and deleted it because it wasn't updating since 2012. I loaded the Adobe Acobat Reader and it will not print or save. Using Mac OS 10.10.2.

Hi Ben,
This could happen due to an Adobe Acrobat Reader DC installation file corruption. I will recommend you to uninstall Adobe Acrobat Reader DC, restart your system & reinstall Adobe Acrobat Reader DC using this link Adobe Acrobat Reader DC Install for all versions.
You can also refer to this KB doc. for help Troubleshoot PDF printing | Acrobat, Reader
Let me know if the issue persist.
Regards,
Aadesh

2-sided print in Microsoft Word for Mac 2011

How do I turn ON 2-sided print in Microsoft Word for Mac 2011 version 14.3.5?

Depending on what year Microsoft you have. If you have 2011, go to File + Print or Command P. Where you see copies & pages, click on the drop down box. Select Layout. Click box next to 2 sided.

I have a Macbook pro thats prints fine to my HP printer, but when I try and print from my iMac it doesnt see the pages and just prints two blank pages. Even thou the document is a number of pages

I have a HP Officejet Pro 8500A and I had no problems printing to it from my Mac or Macbook pro. The macbook is wifi and the Mac is cable, I have recently had the printer replaced with an exact model. Since doing that I can only print from the macbook pro, when I try and print from teh mac it doesnt see the pages. It could be a 10 page document and it will just show two blank pages. I have googled the question and have tried deleating the printer and reinstalling without any luck. When I got the new printer I insalled all the latest drivers thats the only thing different.
Could you please help
Michelle

Right click the printer in System Prefences - Print & Scan and use Reset Printing System... and then reinstall the printer, should take less than 5 minutes. Here is a photo showing how to Reset Printing System....

Trying to print a document from Pages, when I go to print it won't let me select the document. It is grey and I can't click it. What should I do?

Trying to print a document from Pages, when I go to print it won't let me select the document. It is grey and I can't click it. What should I do?

I'm not clear on how you're trying to print. When you select Print from the file menu in Pages the current document is already selected. Perhaps you need to show the details in the print dialog. The first screenshot is from Mountain Lion the second from an earlier OS where you click the blue down-facing triangle button (sorry, I can't remember which one).

Pages doesnt let print or save documents on Mac newest version

Similar Messages

Maybe you are looking for