Pages feature request concerning Thesaurus

I do wish in Pages when you open the Dictionary and Thesaurus after highlighting a word in your document that you could then click an alternative word listed in the Thesaurus to replace the word highlighted. Every other word processing program out there, even Open Office, has this ability. Why is it still not Pages?

Nobody in the forums can tell you why some feature you want is not yet present.  For Apple to see your request, report it at
http://www.apple.com/feedback/pages_ios.html

Similar Messages

  • Where to submit a feature request concerning an application (Mail) that doesn't appear in the feedback section?

    Hello.
    I (and I suppose many others) have a very, very obvious and needed feature to request about Mail.app. As far as I understand, usually such requests go into the feedback section (http://www.apple.com/feedback/). But while even iCal appears on that page, Mail.app doesn't—a fact as bizarre and incomprehensible as the lack of the feature to request. (Namely: Mail allows to set rules for outgoing messages, but it doesn't execute them (obviously a coding error, one that persists since the very first version of Mail. If Mail isn't supposed to allow rules concerning outgoing messages, then it's a mistake to make setting such rules possible; but can anyone think of a sensible reason to disallow such rules?). This is very, very annoying, and it's equally annoying that apple fails to include this application into the feedback page. It's almost like they don't want us to use it.)
    Well. Anybody any idea how to get this through to them?
    Thanks.

    You can submit feedback for the application to the operating system feedback as a start, that is, submit to the Mac OS X that you are using.
    One does wonder why there is not a separate category for something as heavily used as mail, but...

  • Pages feature request

    I mainly work on an iMac at home and I take my iPad to meetings. Keynote works really well.
    I also love OmniGraffle - with those 3 apps I can pitch a project from my iPad, revise on the run and pitch again.
    I really love Pages even if the OS X app is a bit flakey in Outline mode,  but I have a problem.
    I might have 2 meetings with 2 clients and if I am plugged into a video projector I don't want then to see all the documents I have for the other client or the fact that I have all my song lyrics and chord charts for the gig I'll do later that night. Sometime you don't want to tell a bnak you're a  rocker!
    So Apple, PLEASE give us folders in Pages and Keynote. It's not so I can work exclusively on the iPad. It's just so I don't have to scroll through hundreds of the wrong documents in front of my clients in meetings.
    Maybe there's an app that does it but I can't find it! Why can I save MS files in folders and not Apple files? It's just wrong.

    You're only "speaking" to other users here. For Apple to "hear" you you need to leave feedback. You can find it under the Pages menu > Provide Pages Feedback. That takes you to the same page as this link. The same applies to the other apps.
    As for folders, you can create your own sub-folders for templates in Pages. Unfortunately, it doesn't work for Numbers & I don't use Keynote.

  • Feature Request: reopen each PDF at the last open page

    I love many things about Reader for Android, but I read many books at the same time, so for me it is missing one crucial feature: please enhance Reader to reopen each PDF at the last open page.  Currently if I switch from one PDF to another, when I return to the first, it forgets what page I was on, so there's no way to use Reader for my real reading of PDF books.
    Everything else about Reader is fantastic,  so I really hope you can make this improvement.
      Thanks
      Jim

    Thanks Jim , for appreciating Adobe Reader and  for the feature request on remembering last opened page for a pdf . It is one of the top few priorities for us. We would try to include this at earliest in  our next major update.
    Thanks again.
    Regards,
    -vaibhav

  • Feature Request: Reopen PDF at last open page

    1...........................
    At work, I often have to deal with PDF files (of several hundred pages each) and have to keep shifting from one PDF to another. If I leave a PDF file on page 372, open another file, and return to the first file, I am sent to page 1. Why on Earth do I have to find my position in the PDF file manually each time I return to the PDF?
    Please make Adobe Reader remember our last view settings (page position and Continuous/SinglePage mode) for every file. Please consider this as an urgent feature request, which I believe shouldn't take too long to provide, considering that this feature has been available on the desktop versions for ages.
    And could you please give us an estimate of when this feature might be included?
    2.........................
    In addition to the current List View of documents, a thumbnail view would be a huge bonus, specially when trying to pinpoint a particular file from a series of similarly named files (eg. 01.pdf, 02.pdf, 03.pdf....).

    I too would absolutely love to have this feature! Our views match perfectly!! I too have to deal with many files which often have 300-400 pages and then finding my way back in them can get really tedious.
    You can try iBooks if you want as it does have this feature, but I personally prefer the continuous Reading mode that this Adobe Reader app offers! Plus this app is really fast in opening and scrolling through those huge PDFs I have to deal with all the time.
    I hope someone is reading this! (you posted in December and still no reply!!!)

  • PDF Page Flip Feature Request

    Flip books have become popular over the past years and I would like to see the ability to flip through pdf's with a page turn option.  This could be a view with a one page or two page layout.  This functionality would not have to have the robust rendering that a true Flash page flip book has but just an animated quick flip, much like you see on common book readers.  I know this is a small thing but it makes a big difference in perception when one is scrolling through a PDF verses reading through it like a book.  Is this feature a current consideration?
    Thank you,
    Brandon Buie

    +1 For that Feature Request . Everybody will be happy to see pdf contents in ''page flip" mode (except Adobe programmers).

  • Broken link at top of PS feature request page

    Should be this?
    http://blogs.adobe.com/jnack/2009/06/instant_turnaround_feature_requests.html

    Google also has the bad link in their listings:
    http://www.google.com/search?hl=en&q=photoshop+common+feature+requests+nack&aq=f&aqi=&aql= &oq=&gs_rfai=

  • Feature Request: Shortcut files to web pages should show the website's favicon

    If I'm viewing a website, and I drag it's favicon in the address bar onto the desktop, then a shortcut is created to the website. But, the shortcut always has the generic "@" icon. The feature request is to change the icon to include the favicon which I dragged, so for example, if I drag the Apple favicon, I would end up with a shortcut which looks like a document with the Apple logo on it.

    Where to send product feedback to Apple:
    http://www.apple.com/feedback/

  • Feature Request: Setting App page title to something other than "Eloqua 10"

    Hello everyone,
    Long-time lurker, first-time poster. As someone who has been using Eloqua for over 3 years, when working in the application, I will usually end up with upwards of half-a-dozen tabs open in Firefox, all of which say "Eloqua 10". Because of this, I'll usually try to strategically organize my tabs, but often times I end up having to click through multiple tabs to find the one I'm looking for, which can sometimes lead to Firefox freezing. I'm sure I'm not alone in this.
    So to alleviate this, I'd like to make the following feature request: Can we have the tabs/windows named by Asset Type & Asset Name? Perhaps in the following Format:
    [Asset Type]: [Asset Name] - Eloqua 10
    Note how I have "Eloqua 10" at the end of the string. An example of a title would be: "Campaigns: Nurture_Campaign_1 - Eloqua 10"
    Could this please be implemented?
    Thank you,
    Sean

    Here is a snippet of code that I wrote and use without any problem:
       public void ppPrint() {
          if (printJob==null) initPrintJob();
          try {
             if (!printJob.printDialog(aset)) return;
          } catch (Throwable e) {
       public void initPrintJob() {
          aset=new HashPrintRequestAttributeSet();
          aset.add(new JobName("AOKabc",null));
          aset.add(new MediaPrintableArea(.75f,.25f,7.5f,10.5f,MediaPrintableArea.INCH));
          printJob=PrinterJob.getPrinterJob();      
    /* locate a print service that can handle the request */
          PrintService[] services=PrinterJob.lookupPrintServices();
          if (services.length==0) System.out.println("Warning: No printer detected!");
          else {
             try {
                printJob.setPrintService(services[0]);
             } catch (Throwable pe) { }
          pageFormat=printJob.defaultPage();
          Paper paper=new Paper();
          paper.setImageableArea(54,18,540,756);
          pageFormat.setPaper(paper);
          printJob.setPrintable(Preview.this);
       };o)
    V.V.

  • Feature Requests for BlackBerry​10 OS

    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    This thread has been closed and is continued in this new thread here: 
    Feature Requests beyond BlackBerry OS10.3.1
    Please click on that link.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Let's use this thread to list BlackBerry10 OS feature requests. There's nothing official to this thread, but one never knows who might view it and get an idea or two to move foward.
    Please let's keep it to feature requests with simple short statements and comments, in this manner:
    1. Ability to lock the volume keys (since they are so easliy pressed when retrieving from holster)
    2. Personal distribution groups Address Book
    4. Add BBM Group icon to home screen
    **This thread is not for bug reports (i.e., the calendar glitches when I set the date) or for debate or discussion of the worthiness of a feature request.
    So, what would YOU add to BB10?
    What do YOU need to make the OS platform work better for you?
    Here are the collected feature requests as of 04 April 2013. Thanks for Ride_The_Sky for helping collect these from this thread.
    There are listed in no order, just as collected.
    Ability to lock the volume keys (since they are so easily pressed when retrieving from holster)
    Personal distribution groups Address Book
    Add BBM Group icon to home screen
    Way to add line carriage to BBM messages
    Why doesn't the most used name come up first? <- In latest OS, there is another line with most common contacts, but when typing it won't provide most commonly emailed contacts.
    Bring back the option "Send As" or include this option in "Share"
    Enable word wrap when zooming in to emails and messages.
    Import Distribution lists from Outlook on your desktop to your Z10?
    *The option* to always show the hub main screen when opening the hub, so when peeking it always shows the hub even if you leave it in another screen.
    Offer Balance without BES to have two workspaces in device.
    Delete on Server/Device/Both
    Delete on Server but Keep on Device (This is going to be tough since EAS does not work like POP, using POP you can do this by deleting on server after sync)
    Auto power on/off or Auto Do Not Disturb / Scheduled Airplane Mode / Scheduled Silence Mode / Scheduled Custom Profile
    Default Currency Option
    More options to lower data usage in e-mail (Headers Only / Roaming Profiles)
    Snooze a notification/reminder for more than 5 minutes.
    Customized Notifications
    Disable certain accounts to stop receiving email or notifications from them temporarily to avoid data usage.
    Way to delete recent pictures, videos.
    Office Hub customization, sorting, editing, etc., on the fly.
    Select which contact groups to sync, and ability delete all contacts.
    Larger text select tabs
    Add more options to dropbar.
    Improve browser functionality and display, add customization and management of Bookmarks.
    Calendar in Landscape mode
    Option to Disable shutter sounds in camera.
    Auto BCC option
    Multiple appointments in lock screen, not only next one.
    Increase email check frequency, custom minutes (possibly battery concern, most accounts use push nowadays)
    Ability to hide "texting" numbers such as Work, home, etc that aren't able to receive texts
    Ability to have multiple mobile numbers, such as mobile1, mobile2, for people with more than one cellphone
    Ability to have multiple work numbers, home numbers, etc
    Ability to have option for actually creating "custom" names for phone numbers, emails, VOIP,
    Ability to have multiple WORK emails fields for same contact ...
    Ability for a custom note field for each contact, for misc information such as store hours, reference numbers, business account numbers,
    Ability for filter or unselect specific Twitter, LinkedIn, Facebook contacts so they all don't appear
    Ability to "share" contact info with someone else ... like a vcard or the like
    Ability to have custom Individual text and ringtones for each contact set within contacts app
    Vibrate option for Alarm
    Mail Filters for Priority mails.
    Option to block ringtones from music app (i don't see ringtones in my music app, I guess poster refers to custom mp3 files)
    Swipe down to close, up to minimize (but some apps have menus associated with swipe up gesture)
    Swipe half way up the screen to minimize an application to an active tile.
    Swipe it all the way up the screen to close the application.
    Playbook app switching gestures (swipe sideways, I guess this won't work since there are other gestures associated with side-swiping)
    Lock screen with gesture (or maybe they should just add a button on home screen, somewhere on top or bottom)
    Airplane mode on status bar options.
    Option to customize status bar with select Settings/Options.
    Colors for Hub!
    Face recognition for camera, being able to associate contacts with faces or pull info from Facebook, etc.
    Weather info on Lock Screen (if I may add, and constant info on top status bar, simple temp info should be enough)
    We need groups back in contacts please.
    Import text messages in various formats from various systems.
    Sorting and Ordering of the way contacts are displayed depending on account.
    While editing an entry in calendar, notification about a recent call may cause loss of data in that entry.
    Location for Calendar entries and be able to see it on the map with a tap.
    Being able to see multiple pictures from an email by swiping left and right to see next/previous without having to reopen (I must say the same thing is needed for App World, why can't we just scroll through screenshots??)
    Multiple flags or ability to set a flag date, associate with a reminder.
    Move people from TO to CC or BCC easily (If I may add, also ability to backspace to delete a contact without having to tap the X in blue box).
    Option to add favorites to Hub for easy to reach contact management (I think it is same as going to contacts and choosing Favs)
    Being able to answer and make calls when the phone is locked.
    Add more colors to LED notification (I think they are there now, orange, green, red so far, did not see blue, I don't think blue is needed in my opinion)
    Change the way to add date and time for appointment, rollbar is too slow and too sensitive.
    Dismiss and Snooze buttons for Alarm to be different colors, larger, easier to notice.
    Make it easier to order world clocks, instead of the order they are added.
    Alarms based on days/schedule.
    Easier way to get to the bottom of e-mails (I think it scrolls pretty fast, I think poster wants "B" shortcut)
    Easer way to get to the bottom of web pages (same as above, space or B shortcut?)
    Add option to ask if you really want to dial, instead of just dialing right away every time a phone number is clicked/tapped on.
    Ability to resize image before attaching to an e-mail.
    More than 30 days email sync on device, please!
    Make BB boot up slower, so we can actually get to do something else while waiting for it to start!
    SSH client would be nice.
    Another keyboard like Swipe (honestly, I have never typed faster in my life on any other on screen keyboard, Z10 keyboard is awesome!)
    Volume lock/unlock button on demand.
    Auto Run app on device boot up.
    Lock or Pin apps.
    Ability to run background apps (Google Talk is running in the background, or it is tricking me, I don't know but I am getting messages from it when it is shut down on BB10, I hope they do Skype the same way)
    Ability to have multiple documents of same type open at the same time (tabbed docs2go)
    Calendar sharing of BB10 users in the area/company/group.
    PIN Messaging to return.
    Preview e-mails, calendar and other information on lock screen (privacy?)
    Way to clear anything in any "Recent" menu, videos, pictures, etc..
    Ability to hide apps, docs, pics, videos, folders, etc..
    BBM Group Picture notification.
    Support WhatsApp more.
    Another tap for important numbers (Favorites work for this, and on top of speed dial)
    From Call Menu when going into contacts, it should be ready to search with keyboard out.
    Option to customize volume key to act as page up/down, etc depending on app running.
    Red star in app world (means you need to run Updates, just refresh and check by swiping down from top)
    Better headphones with the phone (hey, we didn't even get any!)
    Better night shots in camera (hardware or software improvement?)
    Ability to choose which address book to sync with bluetooth car.
    When app is opened from a folder three or four pages into apps list, we hope the screen can go back to that spot when the app is closed (sadly it uses active frames at the moment)
    Change acceptance of auto corrected key, instead of space key, make it something else (actually, you can just backspace to un-autocorrect it back to what you typed).
    Ability to load certificates (X 509 S/MIME and/or PGP/MIME) from a computer
    Ability to sign and or encrypt emails (POP3)  before sending (As in MS Office Outlook)
    Ability to receive and recognize signed and or encrypted emails (POP3) (As in MS Office Outlook)
    Add a password/certificate manager that doesn't require manual copy/paste
    Ability to encrypt the memories Device and Media of the Q10 like it is done for the BB9900
    Ability to encrypt selected folders (preferably by Private Key)
    Ability to create Self-Decrypting Archive like in PGP
    Ability to delete email-messages by group as an alternate option to one by one
    Opening Video-chat to non-BBM users (Skype for instance)
    For above encryption request, SecuSmart was suggested...
    Renaming the file without extension can break the file or hide it from pictures list.
    Wallpaper scrolling sideways.
    Standalone e-mail app (not sure how different it is than choosing emails-only for hub)
    Different colors or small tabs in different colors for different accounts in Hub.
    Share webpages with smart tag (I think you can just create it by pasting the URL into create QR)
    Application management (being able to see which app takes up how much space, etc..) CPU/Memory/Battery Usage/Data Usage/Storage Usage in more details
    Custom vibration options.
    Move Send button in BBM to avoid accidental submission of message
    Forward As… SMS, MMS, EMAIL from one to another.
    Send SMS to new numbers (I think you can still do this from call log)
    Single key press to change profiles.
    Insert a picture into an e-mail. (I think he means into the body of email)
    Turning off links of contacts (I think poster did not have multiple accounts, actually BB10 goes ahead and adds all new contacts into all address books in all accounts without user permission.. Create a contact in Hotmail? Gets copied to Gmail.. and then linked, terrible implementation in my opinion)
    Presets for browser bookmarks, faster access to bookmarks. (My suggestion was to create a home screen, select 12 icons 3x4 or 16 icons 4x4 as home screen/start page)
    Being able to allow flash based on website/url/server.
    Ability to adjust different sounds/volumes for different BBM users/groups
    Better Voice Dial and Voice Commands (shorter and easier operation)
    Ability close one or all web pages/tabs, add "Close All" button.
    Call Recording
    Faster way to delete e-mails, such as file icons next to e-mails,  or Swipe to Delete! Swipe to File!?
    Customize email signatures with formatting.
    Phone to stay on screen (dial pad always available in panes)
    More Options for Clock.
    In Playbook we can have a single character password, why not on BB10? "too short" well it is my decision, isn't it?
    There is no way to go next/previous while reading an e-mail. Please add these functions.
    Add to the e-mail client, Next Unread / Previous Unread.
    E-mail or Hub should have more buttons at the bottom in landscape mode. Why keep only three (or four in e-mail view) buttons when you have the real estate. It would be extremely handy if you allowed users to edit which buttons should go at the bottom. Next Previous is really needed while reading an e-mail. For example I would love to add "File" button at the bottom as a shortcut instead of forward, I rarely forward, but I file all the time. Maybe allow users to have two row of keys, add next/previous/unread. Or it could be done with a gesture. How about swiping the account name (top blue bar while reading e-mail) left and right?
    When you create a new contact in BlackBerry, it gets synced to all accounts on the Hub. There is no way to limit the new contact to a specific account.
    Sometimes when you file an e-mail to a folder, it stops and waits few seconds with no message. Even when it files immediately, there is a confirmation message that takes time to appear and disappear, and the folder list does not disappear automatically.
    Messages filed automatically by server using server side filter rules are still showing up on Blackberry hub/inbox. In older BB versions the filtered messages did not show up in the list, filed messages still did.
    When you filter your e-mails using Filter / Unread function, new unread e-mails do not show up until you close the filter and re-open. It won't just keep refreshing your screen with unread e-mails. Can BB add a button to the hub "Unread Hub" so when hub shows 8 or 2, you can actually see unread items easily without having to through so many taps.
    Native BB QR scanner (Smart Tags) does not work with barcodes (it only scans with no way to use the information). There is Open In function but it doesn't work properly.
    We need to add more customs search providers, and be able to add custom search strings/wildcards. For example currently there is Google, Bing, Yahoo, Foursquare, etc..
    I hope BB introduces the ability include more standard & custom searches, IMDB, PriceGrabber, Ebay, Youtube, XYZ Forums, ABC Newspaper, 123 Database, Etc.. Most sites nowadays provide search string in their URL Search=?* etc...
    None of the Battery apps can access system settings to add a battery icon to the top. I wish battery percentage was there.
    There is no way to check carrier/mobile signal strength.
    Blackberry, please add the date and carrier / SSID info to the top. Sometimes we just want to glance at the top to see the date without having to swipe.
    Please bring back keyboard shortcuts. Since we can easily swipe up to bring the keyboard, just add keyboard shortcuts in e-mail, phone (true speed dialing, dialing by word?), and browser, etc.. if possible. I could always call 1800SOMETHING# now I have to look up the number or use dial pad.. Please bring it back.
    Camera zoom function needs to be fixed, also please include option of fixed focus by tapping on the screen to focus. The auto focus in video is focusing in and out to various objects all the time. Stabilization feature also causes tearing/ripples, I guess it is good if you are stationary. Or use Volume Keys to Zoom.
    Please allow more than 12 icons in an icon group/folder, I hated Apple for limiting apps per folder, please fix it.
    Auto ON/OFF feature is not there anymore. BB should consider Auto DND (DoNotDisturb) or Auto Silent/Airplane modes instead.
    Please find a way to stop the music app from automatically starting up every time it connects to bluetooth like car audio. This is very annoying.
    No Panaroma mode in Camera app, why not? It is very easy to incorporate. This could be a nice addition to next release, and easy.
    The text selection grips needs to be a little bigger, sometimes I cannot see where I am moving them, they work better in Playbook, nice big tabs.
    Call Functions, before answering a phone add sideways gesture functions, like swiping right will forward the call, swiping left will answer with a test message, etc..
    Or there should be a way to reject the call without sending it to voice mail, phones had this function a decade ago, I don't know what happened to it.
    We used to be able to see the "History" without having to save the contact. Now I don't see any way to "View History" of a certain phone number, it just keeps adding
    them as individual entries to the log. Now I can't see when was the last time they called me, how many times we spoke which day, etc... I loved this feature in BB5.
    Where is BB Traffic? Where is BB Weather, without having to run an active frame? It will eventually disappear if you run too many apps. I liked a little Icon that shows me what the temp is, instead of running a whole app.
    There is no Skype. This day and age with all other platforms having it, please either get skype (Microsoft) to cooperate, or open up BBM to other platforms. If necessary, pay Skype to develop the app, then charge BB users for the app. Most will gladly pay.
    Can we tap and hold on an active frame to pin it, or can we pin two favorite apps between Call and Search & Search and Camera buttons in the bottom bar? How about Close All running Active Frames app to quickly free up ram?
    I hope next generation devices have two speakers or speaker that is facing forward. When playing games or watching videos in landscape mode, I find my palm muting the speaker. I have to hold it gently with fingers to have a gap in between, something I don't want to do when I am on the subway or bus.
    Blackberry Maps should have a Zoom In/Zoom Out buttons, sometimes using it with one hand, it is impossible to zoom in and out. (Zoom in is OK but we can't zoom back out)
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code
    Solved!
    Go to Solution.

    - ability to choose deletion of an email on handset only
    - desktop software working with all older BB's allowing drag and drop type of transferring data, contacts etc. (BB link doesn't recognize my old Storm) 
    - auto power on/off
    - contacts syncing with yahoo & Outlook (almost two weeks trying to work around it and no luck)

  • [Feature Request] DSL line stats & manual IP settings for PPPoE/PPPoA

    After having replaced a Funkwerk R232aw with a Cisco SRP547W I noticed that the software (we're on 1.2.4(003) from Jan 2012) on the Cisco device omits very basic functionality which is even availabe in the cheapest of consumer routers. Therefore I make this feature request in the hope that this may be read by someone from Cisco who could forward this to the development team for consideration for the next software update.
    What's missing:
    - There are only very basic DSL line stats available, and no DSL line uptime. Only if the URL is changed manually to https://[router ip]/dsldiag.asp then a hidden config page with full line stats including framing errors (unfortunately still without uptime!) becomes available. It is not described in the documentation how to find this page, and I only found out by coincidence. Full DSL line stats including error counter data and line uptime are crucial when diagnosing performance and reliability problems on the ADSL side, and really *NEED* to be available from the menue! Considering that the page already exists (albeit hidden), it shouldn't be too dificult for Cisco to include it into the menue structure and add line uptime information.
    - PPPoE and PPPoA apparently are DHCP only. This is a major problem for someone with a static IP and a provider which doesn't do DHCP. It also prevents someone from avoiding using the DHCP-assigned provider DNS servers if the SRP should remain as DNS proxy. As with DSL line stats, being able to set the IP config manually for PPPoE and PPPoA is a very basic functionality that really should also be available in the SRP.
    I am also aware that Cisco aims the SRP (Services Ready Platforms) Series at service providers which then give them to their customers preconfigured, and them the lack of the aforementioned functions may indeed be of no concern. However, fact is that the SRP is also sold as an individual product on the open market, to be used with any ISP. And in this environment this functionality is really important. Therefore it would be great if Cisco could include them into the next firmware release for the SRP500 series.
    What else:
    - Password Complexity Settings: doesn't say what is meant by "complexity" (even if disabled short passwords are not allowed). When clicking on "help" to find out, I get the Troubleshooting FAQ telling me what to do if WiFi doesn't work or there is no dial tone. The help should be fixed to point to the right page, and maybe a small line explaining what is meant by complexity could be added.
    - Log Viewer: would be nice if downloaded logs would come with the .txt ending
    That's all ;-)

    Hello Ben, thanks for the well written post.
    To make a formal feature request, we will need to create a service request (case number). I will be happy to do this for you. If you could please gather documentation for me and make a zip package which contains-
    Firmware version
    When is the last time the unit has been factory reset
    Router config file
    Basic topology
    Who is your ISP
    What service you're using (what kind of dsl)
    Summary of problem description
    Screen shot of where you'd like to see the feature implemented
    Relevant contact info including name, business, telephone, email address
    Any additional information you feel helpful to make your point
    Please send me an email with your Cisco ID and device serial number with this packaged. I will then create a service request and submit for review. My email is [email protected]
    In the mean time, here is a great post
    https://supportforums.cisco.com/message/3717617
    -Tom
    Please rate helpful posts

  • BUGS and FEATURES REQUESTED. Please add to it.

    I've been using the z10 for the past couple weeks and wanted to start a thread of comprehensive Bugs and Features Requested.
    I've labeled Bugs by letters (A,B,C...) and Features Requested by numbers (1, 2, 3...) so that others can add sequentially.
    BUGS
    (Not listed in any particular order)
    (A.) Contact App adds current date as birthday. When I edit my contact, the current date gets listed as the birthday in local contact.
    (B.) Duplicate telephone numbers listed. Telephone numbers show up twice in my Contacts (e.g.., if I have the contact's cell saved in (000) 123-4567 format and the person has the number listed in Facebook, I get a duplicate entry of +10001234567).
    (C.) Telephone numbers and emails are not actionable in Web pages. In webpages, I can't click on telephone number to call (e.g., I look up a phone number for a restaurant). I should be able to easily call or copy into the Phone App or E-mail App.
    (D.) Auto capitulation for words on the word substitution list is wrong. For example, when the word substitution contains more than one word. I have "ru" change to "are you" but if the first letter is capitalized (R) then both words become capitalized words (Are You). I used to have shortcuts like "mysig" to create email signatures with legal disclaimers but I can't do that now.
    (E.) Backspace delete doesn't work consistently. The Shift+Delete function seems only to work after moving the cursor. This feature is the Alt+Del action to delete words after the cursor.
    (F.) All Emoticons do not list. Emoticons do not all fit on the the two screens (lists) of emoticons. I.e., two columns are missing from view and can be seen when sliding (swiping) between the lists. Also, sometimes when I select an emoticon, it doesn't correspond with the picture of the one I intended. I believe this error is related. As a separate note, there should be a way to see the underlying symbols of the emoticon. (Often times, other people don't have BlackBerrys so I'd like to know what symbols would be sent--my prior 9800 would show the characters as i scrolled through them).
    (G.) BlackBerry keyboard doesn't always work in input fields. E.g., certain Web pages. (I found a work around; two finger swipe up from the bottom makes the keyboard appear)
    (H.) Sent messages stay unread. This seems to be an issue when an app sends an email (e.g., share article). The email with the sent indicator (checkmark) stays bold and I have listed 1 unread email. I can't mark as read/unread but if I delete the sent email, my unread message gets cleared.
    (I.) Contact already added but I get the option to add instead of view contact. For some contacts, I get the option to add to contacts in the action menu cascade when that person is already in my address book. This bug is for emails and text messages.
    (J.) Cannot call from text message. When I hold a text message and select call under the action menu cascade, the OS opens up the phone app but doesn't call.
    (K.) Composing messages by name. When composting messages, the input must be by first, middle and last name. It should be, instead, by string and include nickname. E.g., if the person's name is "Andrew B. Cameron" I must type the name in as such. I can't type in "Andrew Cameron" or "Andy Cameron."
    Features Requested and Suggestions for Improved User Experience
    (In no particular order)
    1)      Option to reply in different ways from the Call List. Be able to select a name in a call list and have options to call, text or email the person. The action menu allows calls to other numbers but I can't choose to text or email the contact instead. Sometimes, I missed a call and want to reply via text because I’m not able to talk. (Long hold on the Torch 9800 trackpad button brought up the action menu allowing me to call, text, view history, add to speed dial, e-mail, delete, etc.)
    2)      Option to reply in different ways from the Hub. Related to above, when selecting an item in the hub, have the option to contact the sender or caller with multiple different ways.
    3)      Only show number once in contacts application. Tap on the number to bring up the "action" cascade menu with options to call or text the number. Why is the same number listed twice (once to call and below again to text it)?
    4)      Timestamps for individual text messages. I can't tell exact time on individual text message if it comes in near the time of another text. All messages are in one "bubble."
    5)      Ability to select MMS or text for a message. Sometimes I write a text longer than 160 characters and I prefer it to be sent in one message (i.e., MMS mode) rather than being broken into one or more standard text messages. I had this ability with my 9800.
    6)      Send button should be moved for text messages!!! Why the heck is it right underneath the delete button?!? Or next to the period button? I often times have accidentally hit send when composing text. It's very annoying and embarrassing. (Also, what happened to the ability to hit enter for a return carriage to next line?)
    7)      Bigger magnifying glass. My finger is often over the area I need to place the cursor. I find it difficult and erratic to place the cursor.
    8)      Select all option. Add the option to select all text in action menu cascade.
    9)      E-mail recipients and message headers. Difficult to tell if you are one of many email recipients. Can we have a way to pull the email down to see the list of recipients rather than have to click to expand the header info? I know this request is a little picky, but that's how it was done in the previous BlackBerry OS which I preferred; it is easier and faster to pull the e-mail down and 'peek' to see which e-mail box received the message, message status, from and to fields. This change would be consistent with BB's flow/peek rather than click.
    10)   Browser navigation. Hold down back arrow to get a list of recently visited websites similar to a desktop browser.
    11)   Dark/Night mode. A night mode (maybe in the drop down menu) to change all the white and bright backgrounds to black or dark which would be helpful when reading/viewing things at night in bed/etc.
    12)   Number of contacts. Ability to see how many contacts I have.
    13)   What happened to groups or categories? I'd like to have back the ability to filter or see categories and also a way to contact everyone in a category. E.g., family or friends or coworkers, etc.
    14)   Shutter sound mute. I was at a wedding and wanted to take pictures during the ceremony but the shutter would was too loud.
    15)   East Asian Language Input. I bought my parents two Samsung Galaxy S3 phones over the weekend because they need Korean input (and the Kakao talk app). (BTW, S3 is a great phone but I prefer the Z10 after having the weekend to use the Android phones).
    16)   Ability to freely place icons on the homesreen. Currently, icons are forced top left-right-to-bottom. I prefer to space my icons out.
    17)   Add a contact to the homescreen. I'd like to place a shortcut (similar to a Webpage) to the homescreen for a contact which will open up the contact. Android allows this feature and so did my previous 9800.
    18)   Search Contacts by nickname. The contacts app doesn't allow me to search by, e.g., Andy, even if I have that as my contact's nickname. The previous OS allowed this type of search which was very helpful.
    Finally, as a note, I've been using the BlackBerry Z10 for the past 2 weeks and it's a great platform. I just bought two Samsung Galaxy S3 phones over the weekend for my parents so they could use the Korean language input and related features so I spent a lot of time with the Android platform, setting it up and teaching them how to use it. The S3 is a great phone too.
    I prefer, however, the way BlackBerry has done their OS 10 and the integrated management of messages.
    It's too bad that BB doesn't have Korean input and apps like Kakao Talk or I would have considered it for them.
    The BlackBerry 10 is a great platform and I look forward to the continual improvements that will only make the experience better.

    This is a great post.
    I couldn't have written it myself better.
    I'm also in dying need of Korean input as I can't communicate with my Korean friends.
    But I second every point.
    I hope the tech teams are reading this.

  • FAQ: How do I submit a bug report or feature request or otherwise give feedback about Premiere Pro?

    The best way to submit a bug report or feature request is to use the bug-report/feature-request form.
    The Premiere Pro team doesn’t  necessarily see and record every post on every forum and social network, but we do see, record, and track every entry  through the the official feature-request/bug-report form.
    It also helps a lot if you opt into the Product Improvement Program.
    Also, be sure to use the crash reporter.
    We really do read all of the bug reports and feature  requests, and the software really does get a lot of benefit from  detailed crash reports.
    Don’t forget about contacting Adobe Technical Support or Customer  Service, too. For information on how to contact Adobe Technical Support,  see this page. (Note that you must register your product before you can open a technical support case for it.)
    If you have tried to get help from our support staff, but the service  was inadequate, I can help you to escalate your issue if you send me  your case number at kopriva at adobe dot com. You must provide me  a case number. I am not offering to solve your problem myself; rather, I  am willing to forward your information to someone if you have already  hit a dead end with our Technical Support or Customer Service.
    If you have feedback about the content of the Premiere Pro Help document,  then please add a comment at the bottom of the relevant page. You can  add comments to add information, to add links, to make corrections, or  to ask for clarification.
    If you want to keep up with the Premiere Pro team, then you can follow our blogs, Facebook page, and Twitter feed and so on.
    Oh, and I can’t resist this opportunity to remind you to update to  the most recent version of the application. Don’t be surprised when the  first thing that you hear back from us is that you need to install the  latest updates. We fix a lot of things in updates, and we don’t want to go chasing bugs that we’ve already fixed. We’ll keep you posted on our blogs, Facebook page, and Twitter feed about updates as they become available.

    Hi qwerty,
    Dun tink that creative customer support sucks cos I had been dealing with them in the past and I can say that their service are quite gd and fast. If you wanted a refund, I tink you need to contact the store that sells you the product. Dun tink creative will refund you though.

  • Lost & Found iPhone with Find My iPhone - Feature Request

    Yes I found the lost phone and I'm very very grateful for the existing feature which works flawlessly once you get a hold of it but from a real life use case, there are things that can be improved that will make it more efficient and effective. This is a summary of feature requests that I figure from the real-life use case of Find My iPhone.
    Earlier this week my friend dropped his iPhone on a cab and realize at the end of the day (he initially thought he left it at home) that it must have fell off his pocket in the cab where he can hardly remember the color of the cab let alone the license plate. Having said that I asked him if he had iCloud turned on (basically Find My iPhone in recent iOS) and so we checked. So here is where all the difficulties begin and please keep in mind that in a situation like this we're always in a hurry if not panicking.....
    1. You typically have more than 1 mobile phones:
    a.) Where its most likely different brand, model, or OS (you don't buy two identical phones) so in this case he has a Samsung Android where iCloud page can not be rendered - it throws an error. So this didn't work
    b.) You need to borrow your friend's "iPhone" to find it and not many people find it obvious that you need to download the Find my iPhone app in addition to just activating iCloud to track a phone. Thats another long step considering in some countries u have a really crappy 3G or sometimes on Edge
    c.) If you are lucky your friend have an iPhone or an iPad, you go to www.icloud.com it doesn't do anything except tell you "how to turn on icloud", download Find my Friends, and Find my iPhone.....you need a laptop browser to be able to use the tracking feature....why????? I understand that it won't work with other brands of mobile phones but these are both Apple's!!!
    2. When you realize that you have lost your phone, you don't always have your laptop or an iPad - but you always have mobile phones let it be your secondary one or your friend's. Moreover, your laptop rarely have cellular connection so even if you have it, aside from the fact that it takes you 15 minutes to boot up your laptop, you also have to find yet ANOTHER phone to tether or find a 3G card to plug in to it so it can use cellular as oppose to just wifi, and then walk around with a laptop looking for the lost phone. And laptop don't have GPS, you don't know where you are relative to your lost phone.
    3. You are trying to look for your iPhone from another iPhone (the most convenient way) but you only see ONE dot that shows your lost iPhone but not "you" who are walking around looking for it so you have to:
    1.) Open the Find My Iphone app and then see where your phone is located
    2.) Open up Google Map (sad but true, Google map is currently the preferable map) to find where you are. Why Google map? In a less developed country, google maps works a lot better in detail.
    3.) Try to find where you are relative to where the lost phone is across 2 maps and 2 different apps. But even if it was Apple map, its still 2 different apps switching back and forth.
    Yes, the idealistic case which would disregard all this is that you have 2 Apple devices logged on to the same iCloud account then you can see 2 dots but not everyone have enough of that to make it useful :-)
    4. You use to have a send message button, lock the phone, make noise, and erase the phone. Now you need to first lock the phone before you can send a message. Understand that you should always lock the phone first but when you're panicking, making the feature obvious would help
    5. Would be nice to know the "percentage" of the battery and being able to shut down all the apps, dim the screen, and etc. to maximize the battery time before the phone goes dead might be helpful.
    It was almost a miracle to get the phone back in a place like this where people tend to immediately shut down your phone and throw away the sim card once they get a hold of it. My friend was very lucky that the phone was in silent and fell into the crack of the backseat and the cab was parked outside the garage so the GPS location was absolutely precise.
    Having mentioned that, iOS7 new security feature that requires your Apple login credentials to erase or turn off Find my iPhone. My question here being it says, find my iphone can continue to display message even after erased - if that is the case will I still be able to track it as well? What if I'm the person who erased it remotely, will I still be able to display message as well as track it?

    This is a user to user community, Apple are unlikely to read your comments, if you have any suggestions that you think might enhance iCloud you can send Apple your feedback here.
    We also can't speculate on what exactly iOS 7's new security features will actually do, all that's available is what has been said so far by Apple, anyone using a developer version is forbidden to discuss it anywhere but in the developers community.

  • FEATURE REQUEST: Enhanced Texture Options in FW

    Recently, a forum user was asking how to change the color of a texture in Fireworks to red or blue. In particular, he/she was struggling with attempting to apply a texture to a white object, and it wasn't showing up.
    http://forums.adobe.com/thread/1006694?tstart=0
    The question got me thinking about textures, how they're created and how they're applied. Textures are a unique and distinctive feature of Fireworks. On the one hand, the interface for textures is very simple to use and almost magical; on the other hand, it's surprisingly limited. The concept is great, but the implementation seems only half-baked.
    With this in mind, I'd like to suggest a few simple ways that textures could be made more fluid and versatile in Fireworks.
    First, a little background...
    WHAT IS A TEXTURE?
    In the world of Fireworks, a texture is basically a type of pattern that's applied to an object. However, unlike a pattern fill, textures include transparency and integrate with the existing fill content (color, gradient or pattern). They're suggestive of textures in the real world, which are often tactile and defined visually by light and shadow.
    Texture graphics are most commonly grayscale ("black and white") in GIF or PNG format. Applied within the application, the graphics are converted "on the fly" to white-on-transparency. If the Transparent option is checked, the graphic is converted into a sort of mask, making the "textured" areas invisible instead of white.
    And that's about it.
    So what if you'd like to apply a dark texture to a white object? Sorry, it can't be done. What if you'd like to apply a texture in color? It can't be done. What if you'd like to reverse or invert the pattern of the texture? Can't be done.
    Well, in fact, these things can be done, but not directly. They require workarounds such as cloning the object and placing the clone above or beneath the original, applying textures as pattern fills (instead of as textures) and adding effects like Color Fill, Invert, and Convert to Alpha, or editing the texture file directly, saving out a new copy, etc. In short, there are unintuitive ways to accomplish these goals that lead to bloated effects lists and layers or that require extra time and care.
    HOW CAN TEXTURES BE IMPROVED?
    First of all, does it make any sense that textures are applied exclusively in white? Not really. In the real world, a texture can be defined not just by light but by shadow. And even shadows can have color. This means that, at minimum, it would make sense to allow for the application of a texture in black, and, at maximum, in any chosen color.
    Secondly, textures are relative. They represent change to an existing surface. Sometimes, it might make sense to highlight the texture itself; other times, the surface around the texture. This means that being able to quickly reverse the figure-ground relationship of a texture would be a very handy feature.
    With the above concerns in mind, I've devised three 'user interface' scenarios, presented here in order of most conservative to most extreme. The first scenario is the least powerful but still doubles the number of possible outcomes (compared to the existing interface). The second scenario may be the most logical of the bunch and represents a modest evolution of the existing interface, while increasing the number of potential outcomes even further. The third scenario allows for the application of any color to a texture but also represents the biggest change to the existing interface; that said, it's also quite compact.
    Scenario 1: Invert option
    The idea here is simply to add an Invert checkbox to the existing options. Checking this option would convert white to black, allowing for the application of dark textures to white or light-colored objects. In "Transparent" mode, this option would invert or reverse the figure-ground relationship of the existing texture.
    Scenario 2: Dropdown menu plus Reverse option
    Here, the Transparent checkbox is replaced by a dropdown menu that includes 3 mutually exclusive options: White, Black, or Transparent. Checking the "Reverse" option would invert the figure-ground relationship of the texture. This scenario allows for 6 possible outcomes in place of the existing 2, and is actually more logical than the first scenario, which conflates two options.
    Scenario 3: Color picker plus Reverse option
    Here, the Transparent checkbox is removed, and in its place, a color chip/palette is added to allow for the selection of any color to be applied to a texture. (Choosing Fill: None would create Transparency.) Again, a "Reverse" option would invert the figure-ground relationship of the texture. This scenario differs most from the existing interface but is quite compact and allows for the greatest number of outcomes.
    SO WHAT CAN YOU DO?
    I've submitted a feature request to Adobe's official site:
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    When it comes to bugs and/or feature requests, every vote counts. If you care about this issue, I encourage you to submit your own feature request to the above URL, referencing this post if desired. Feel free to copy and paste the feature request below or write your own. (Be aware that there is a 2,000 character limit to the "issue description" of a bug report or feature request, and the following report is very close to that maximum.)
    FEATURE REQUEST
    Product name: Fireworks
    Product Version: 12.0.0.236
    Product language: English
    *******Enhancement / FMR*********
    Brief title for your desired feature: Enhanced texture controls, including the ability to apply textures in black and/or color (instead of white), and the ability to reverse or invert texture.
    How would you like the feature to work? Three possible implementations have been outlined in this forum posting:
    http://forums.adobe.com/thread/1042206?tstart=0
    The basic scenarios are as follows:
    SCENARIO 1: An additional "Invert" option. Checking this option would convert white to black, allowing for the application of dark textures to white or light-colored objects. In "Transparent" mode, this option would invert or reverse the figure-ground relationship of the existing texture. This scenario would allow for 4 options in place of the existing 2.
    SCENARIO 2: Replace Transparent checkbox with a dropdown menu (White-Black-Transparent) and a "Reverse" checkbox. The dropdown menu offers 3 mutually exclusive options, while "Reverse" inverts the figure-ground relationship of the texture in each case. This scenario would allow for 6 options in place of the existing 2.
    SCENARIO 3: Replace Transparent checkbox with a color chip/palette and a "Reverse" checkbox. The color palette would allow for the application of a texture in any color, while choosing Fill: None would create Transparency. This scenario would allow for the greatest number of options.
    Why is this feature important to you? Textures are unique to Fireworks and potentially very useful, but their implementation is incomplete. The use of 'white only' means that textures cannot be applied to a white object. Inverting a texture or applying a texture in color requires advanced workarounds and can lead to bloat. The suggested options would make the feature exponentially more powerful and intuitive.

    Thanks, Jim! It is a very blog-like post. (I still haven't gotten around to starting a blog but keep thinking I should.)
    I figured the clearer and more thought-out the presentation, the greater the likelihood it might get implemented. Also, I was originally stuck on Scenario 1 as a solution, and writing this helped me see other options.

Maybe you are looking for