Pages froze while working on a document and doesn't respond anymore. What can I do to reopen it ?

Pages froze while working on a document and doesn't open anymore. What can I do ?

Is this in Pages 5?
Sometimes it helps told press the Shift key when one tries to open Pages. It will also stop opening a lot of documents that isn't closed before quitting Pages.

Similar Messages

I have an Iphone 5s with an account icloud that isn't an iCloud id, why? I cannot remove and the mail that names id doesn't exist anymore; what can I do?

I have an Iphone 5s with an account icloud that isn't an iCloud id, why? I cannot remove and the mail that names id doesn't exist anymore; what can I do?

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
You will need to show patience with the procedure and be prepared to demonstrate without question that the account belongs to you. Don’t expect access to be restored immediately and if you aren’t the owner of the Apple ID registered to the device the account won’t be reset.
This is answer is provided from my own database of boilerplate responses and the content was last reviewed and/or tested on: 2014/12/18

My Ipad2 is always restarting, but only appears the apple symbol and doesn't starts. What can I do?

My Ipad2 is always restarting, but only appears the apple symbol and doesn't starts. What can I do?

Thank you for your reply.
I don't think it's paired with another device, as the Apple TV (3rd Gen) is the only device I have from Apple, that uses this remote (unless my iPhone or iPod can pair with it) ..or maybe the remote pairs with other than Apple products ? (Can it) ?
I have tried to press the menu and right - left - up- down - middle - play/pause simultaneously without anything happening.
All I'm left with now, is a brick with a flash on it.
I never connected it to my laptop before it broke down (as it only was 2-3 days old) can that be a problem for resetting it ?

I cant remember my passcode to my ipad, its disabled and i have tried everthing to sync back to my computor but it doesn't respond. What can I do? All my personal and business info on my ipad.

My grandkids put a passcode on my ipad while playing games. I have tried everything posted but it still does not respond. What can I do?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Battery died while working on a document, and now most of it is gone.

I was working on some class notes and my battery gave out. This has happened before, usually when I get back, everything is still there.
But not this time.
Is there any possible way that i can recover my work?

For the future:
Learn to go +command s+ whenever you feel the work justifies it and:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=8&mforum=iworktipsnt rick
Peter

My computer turned off while working on a document and it wasn;t saved!! It closed it?

help!!

Which operating system were you running ?
Lion is fair enough to AutoSave, even when a sister plays the fool but to activate the AutoSave feature, you must save at least once.
Typing 2000 words without saving at least once is playing with matches.
Now, at least, you know that doing that may burn fingers
Yvan KOENIG (VALLAURIS, France) samedi 24 décembre 2011 19:40:27
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

My ipod touch 4th gen froze! blank white screen and doesn't respond when turned off, or connected to my laptop

my ipod touch 4th gen froze! only blank white screen and doesn't respond when turned off or connected to my laptop!

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?

Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
Thanks for your assistance.

If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

My iphone 4 randomly froze while i was face timing and now its just a black screen with thin grey lines on it. it wount turn on even if i press the lockscreen or home screen button. ive tried chargingit but that wont work either.

my iphone 4 randomly froze while i was face timing and now its just a black screen with thin grey lines on it. it wount turn on even if i press the lockscreen or home screen button. ive tried chargingit but that wont work either. It's been like this for about two hours now.

Hold down the Home and Power button for 20 seconds. And try to update again.
Also read and follow this:
http://www.apple.com/support/iphone/assistant/restore/

My MBP mid 2010 display blackout and froze while working but my keyboard light will still light up. Won't be able to retrieve it and have to hard shutdown. Sometimes it happens a lot. Wether it connected to power or not, it will blackout on and off. Pleas

My MBP mid 2010 display blackout and froze while working but my keyboard light will still light up. Won't be able to retrieve it and have to hard shutdown. Sometimes it happens a lot. Wether it connected to power or not, it will blackout on and off. Please advice what shall I do.

Do you have a 15" mid-2010? If so then your problem is surely...
Mid-2010 15" MacBook Pros - the bad NVIDIA GPU
If you're having frequent kernel panics with your 15" mid-2010, or intermittent screen problems, the problem is, more than likely, the faulty NVIDIA GPU found in a number of those machines.
Here's just a sample of a kernel panic log that points to the faulty NVIDIA card:
Kernel Extensions in backtrace (with dependencies):
         com.apple.GeForce(6.4.0)@0x82ac4000->0x82b7afff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
         com.apple.nvidia.nv50hal(6.4.0)@0x83c05000->0x84019fff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
         com.apple.NVDAResman(6.4.0)@0x834a0000->0x8378dfff
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
Here's the "official" Apple take on the issue - but the very real kernel panics need not be preceded by 'Intermittent black screen or loss of video'... in fact, you might not experience any video problems at all. Although video problems can certainly be a portent of things to come…
So what can you do? Print out a copy of your kernel panic and a copy of the Knowledge Base article and take them, along with your machine, to your local Apple Store or an Apple Authorized Service Provider. The unfortunate thing is that many people have passed the “three years from date of purchase” now and Apple is not honoring the free logic board replacement for many users. Some dealers seem to be making some exceptions for those past the three year mark, but don’t count on it…
Good luck,
Clinton

While working with Google Documents Safari Version 7.1 on OS X 10.9.4 crahses all the time

While working with Google Documents Safari Version 7.1 on OS X 10.9.4 crahses all the time
Now I am working with FireFox
Today I have noticed that FireFox had this Google Talk pop-up
Maybe this pop-up Google Talk is what is causing Safari 7.1 to crash Attached JING of Google Talk pop-up on FireFox
So, back to SAFARI 7.1..how to stop this pop-up from crashing Safari 7.1

You downloaded a beta copy of 7.1 because the current version is 7.0.5. There was a mixup yesterday and 7.1 was accidentally made available for downloading. Do you have a backup you can restore from to get 7.0.5?
You can also try running the combo update to see if it will restore it.
10.9.4 Combo Update

HT3386 How do you remove part of a file. My thumbnail attach themselves then refuse to allow editing without deleting my complete work. I even scan in jpegs of my documents and it incessantly adds blanks I can't remove.

How do you remove part of a file. My thumbnail attach themselves then refuse to allow editing without deleting my complete work. I even scan in jpegs of my documents and it incessantly adds blanks I can't remove.

Pages documents are organized in sections. When you click on the thumbnail for a page, the section containing that page is selected. The Delete command applies to the selection, so if you press delete at this point, the selected section is deleted.
You can separate a section into two or more sections by inserting a section break at the end of the page before the page you want ot be the first in the new section, then inseritng a second section break where you want the second section to end. Click on the thumbnail for any page in the new section, thenpress delete and the new section will be deleted.
If desired, you can then reconnect the two remaining sections into one by deleting the section break between them.
An alternate is to select any floating objects on the pages you want to delete, then press delete. After that, select the text on the pages you want to delete, then press delete.
If all objects on these pages (and al objects on pages following these pages) have been placed as Inline objects, this deletion may be done in a single step. Floating objects placed below the deleted material will maintain their position relative to the top left corner of the first page of the section,m and will not be in the same place within the text as they were before the deletion.
"I even scan in jpegs of my documents and it incessantly adds blanks I can't remove."
If your jpegs are inserted as inline objects, each will be treated as a single, large character in the text. You will see the same space left and right of the object as you would create by increasing the height of one character in the line of text to the same size as the height of the jpeg image.
If they are inserted as floating objects, then depending on the Wrap settings, they may force text out of the space to the left, right, or both sdes of the object, as well as forcing a small gap above and below the object. If the scan includes excess white space around the graphic, this white space will be included as part of the object
Regards,
Barry.

One of the pages I am working on is blocked and I cannot delete/change items displayed there

One of the pages I am working on is blocked and I cannot delete/change items displayed there. I have unlocked all the layers but still cannot access the content on that page. Thoughts?

I'm using version 9.2.1. on a mac
I'm helping edit some maps for the company I work for. The pages are regular A3
The map part is not blocked, but the second page with the descriptions/text will not let me make any changes to it. I cannot select anything on the page including the images.
I am trying to edit the text provided and rearrange the page layout accordingly.
I thought this was a "layer" problem, but this does not seem to be the case.

My pc froze while attempting to sync iphone4 and now cant turn it off? any ideas on what to do next??

my pc froze while attempting to sync iphone4 and now cant turn the phone off? any ideas on what to do next??

Try the following:
1. Reset: Hold the Sleep/Wake and Home button down for about 10 seconds until you see the Apple Logo.
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808

I have purchased the new apple earpods a while ago (few months). And I was wondering if I can use my warranty cause one earpod doesn't work anymore

I have purchased the new apple earpods a while ago (few months). And I was wondering if I can use my warranty cause one earpod doesn't work anymore.
So please help!

See this: Using iPad or iPod with multiple computers, http://support.apple.com/kb/HT1202

Pages froze while working on a document and doesn't respond anymore. What can I do to reopen it ?

Similar Messages

Maybe you are looking for