Pages gets very slow when working on a long table in a document

Hello!
I'm working with a table in pages09. it goes over pages. as soon as i want to write some text in the different fields, or, worse, CHANGE text in the fields, pages gets very very very slow.
why? what can i do?
i tried the wrap/unwrap-function, but it has no influence.besides, if it's not wrapped in the text, i cannot see the whoe table.
do i make some mistake?
thanks for answers, greetings from zürich
kolibri

The code used to drive tables is quite the same than the one used by Numbers.
It is slow in Numbers so, it's logically slow in Pages.
Yvan KOENIG (from FRANCE mardi 24 mars 2009 20:48:40)

Similar Messages

InDesign CC 2014 is very very slow when working with a table.

InDesign CC 2014 is very very slow when working with a table. Every 1/2 - 1 hour it nearly falls back, impossible to work with. While this project must be finshed quite soon..
What the hell is the matter with this Creative Cloud. I havea very fast iMac form 2014. I closed all other programmes, even cannot listen to music now. More people with this problem??
Martien

@Martien – How complex is your table?
How many cells? Merged ones as well?
Complex formatting of texts inside the cells?
Complex formatting rules of table rows and/or columns?
Many images inserted?
If yes, and the table is running through many text frames of many pages, I fear, you can do nothing against slowness.
Nothing but: Greek text, not showing the page contents in the Pages Panel, in short: anything you can do to get better performance in redrawing of the screen.
If you have the chance to break up one big table in several parts, do that and edit its parts one after another isolated. Pehaps in different documents.
Then merge the parts in one table, if you want to flow it from page to page.
Uwe

MacBook Pro gets very slow when Safari is opened

When I open Safari, my computer gets very slow.
If I quit Safari, everything works fine.
How can I re-install Safari?
Could it be my HD? I have already repaired my HD.
Software: Mac OS X Lion 10.7.5 (11G63)

reboot your computer to the recovery partition by restarting and holding the keys:
<COMMAND> + r
Follow the directions here:
http://mac.tutsplus.com/tutorials/os-x/verifying-and-repairing-permissions-in-os -x/
in the section "Working in recovery mode".
After you repair permissions also perform a disk repair then reboot:

Client screen gets very slow when viewing from ARD

I don't think this was a problem - or as much of a problem - with earlier versions (pre-Lion?). But when I observe someone's screen, suddenly they can't move windows easily, the redraws get very stuttery, etc.
This is NOT the case if I use regular Apple screen sharing, whic
Any suggestions?
Using Mac Pros, mostly 2009 Nehalems with dual monitors and Lion 10.7.4. "All Computers" has about 160 systems. I'm up to date with the software.

All ethernet GigE connections to switches (no wifi), switch infrastructure is much faster than that (not sure if fibre or 10Gig E), all Brocade switches I believe. The machines ARE on different subnets, but I don't think that's making a difference. ARD also isn't "refreshing" as well as it used to before Lion (meaning, the "All computers" list frequently doesn't update the computer's status). I feel ARD worked much better on Leopard and Snow Leopard, but I have no proof of that.
It helps only if I drop it down to monochrome (using the resolution fader on the upper-right), but it's very hard to work that way.

Microsoft excel 2013 stops working and getting very slow when I work in one file

I am using windows 8.1 pro in my office and I have excel 2013,
When I'm working on excel generally there is no problem, but I have an excel file which I work on in it's too slow and stops working, I have also tried to open the same file in another computer which is having the same problem.
while I was using Office 2010 it was working very fine, I can also share my file with you if you want in order to be checked and resolved.
I appreciate if you help me,

Hi,
You can share the file with us by sending it to GBSD TN Office Information Collection [email protected] Be sure that you have the private information hidden.
Meanwhile, since it works fine in Office 2010, we can try to open the file in Excel 2010, then go to File > Options > Formulas, check if you have enabled iterative calculation. If so, uncheck the check box and switch the workbook calculation to Manually.
Then, save the changes and then open the modified excel using Excel 2013 to see the result.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Windows Explorer is very slow when working locally on 2008 R2 server

We have 3 file servers in our office. All run Windows 2008 Server R2 X64 Enterprise. File server services are all they do.
One of the servers runs perfectly.
Two of the servers... when an office user uses windows explorer on their own machine to view the folders & files on the file server it is extremely fast. But, if I either log in locally or RDP onto the file server... using windows explorer... it is slow
as molasses. I wold estimate a 5-7 second delay.
Microsoft is blaming Doubletake, a replication software package we use. But... we use Doubletake on all three of these servers... I have found postings suggesting Kaspersky AV is the issue... but again, we have Kaspersky on all 3 servers.
Any ideas??

Hi,
Please understand that an issue could be caused by an application in specific environment. Thus we cannot eliminate an application just because it works fine on other systems.
A quick test is to disable an application (Doubletake and Kaspersky in this case) and see if issue still exists. Please make sure it is disabled completely.
A common suggestion to determine if an issue is caused by third party program is to booting the computer into Clean Boot mode. Detailed steps could be found here:
Perform a clean startup to determine whether background programs are interfering with your game or program
http://support.microsoft.com/kb/331796
If issue still exists in Clean Boot Mode, it should not be caused by the third party application which is disabled already. It is still suggested to make sure all third party apps are disabled when you boot into Clean Boot mode.
If you have any feedback on our support, please send to [email protected]

Command execution get very slow when AAA Authorization enable on ASR 1006

Without Authorization , I am able work smoothly with just click on ASR ...., But Once I enable Authorization it takes many secs to move to other command exampe ( If i hit config t or int gi1/0/1 , it take time to move to next command level) ...
These Authorization issue I am facing only on ASR and for Other Cisco Switches and Router its working fine wiith just a click.
Did any one face such issue , and how it is fix ...
See the Show version for ASR
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVIPSERVICESK9-M), Version 15.1(2)S, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 24-Mar-11 23:32 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2011 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
NOITDCRTRCORP01 uptime is 10 weeks, 6 days, 1 hour, 16 minutes
Uptime for this control processor is 10 weeks, 6 days, 1 hour, 19 minutes
System returned to ROM by reload
System restarted at 17:47:32 IST Thu Oct 4 2012
System image file is "bootflash:/asr1000rp1-advipservicesk9.03.03.00.S.151-2.S.bin"
Last reload reason: EHSA standby down
AAA Commands on ASR 1006
aaa new-model
aaa group server tacacs+ tacgroup
server 10.48.128.10
server 10.72.160.10
ip vrf forwarding Mgmt-intf
ip tacacs source-interface GigabitEthernet0
aaa authentication login default group tacgroup local
aaa authentication enable default group tacgroup enable
aaa accounting exec default start-stop group tacgroup
aaa accounting commands 1 default start-stop group tacgroup
aaa accounting commands 15 default start-stop group tacgroup
aaa accounting connection default start-stop group tacgroup
aaa accounting system default start-stop group tacgroup
aaa authorization commands 0 default group tacgroup none
aaa authorization commands 1 default group tacgroup none
aaa authorization commands 15 default group tacgroup none
aaa session-id common
tacacs-server host 10.48.128.10 key 7 13351601181B0B382F04796166
tacacs-server key 7 053B071C325B411B1D25464058

I think your issue maybe related to your tacacs server. If you re-order the two servers (typically a 5 second timer before failover occurs) and see if that improves your performance:
You can try to debug the issue by referring to the command reference guide....i.e. debug tacacs...you can also try to telnet to both ip address to port 49 to see if the connection opens, in order to rule out issues where a firewall or routing to one of the tacacs servers is failing. I also noticed you have the shared secret and tacacs server defined for one of the servers, is the sam present for the other server that is in the server group?
server 10.48.128.10
server 10.72.160.10
to
server 10.72.160.10
server 10.48.128.10
Thanks,
Tarik Admani
*Please rate helpful posts*

IPad gets very slow with large apps installed ?

Hi,
I have a 64GB iPad 3 and I noticed it gets very slow when I install large apps. Apps larger than 1 GB.
I have bought a number of excellent reference apps, but can not keep them on my iPad together.
I have to delete one before I can install the next or else my iPad runs into trouble.
I can have about 5 large apps installed and no more.
It takes forever to boot, restarts, has delays when typing and crashes all the time with my large apps installed.
Is this a limitation of iOS 6, or is it because I have dropped below 10 GB of my 64GB storage.
Does my iPad use the storage for memory?
I bought a 64GB so that I could use my large apps.
Sean

10GB of free space should be adequate. Have you done a Reset?
How much space is your Other using? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
How to Fix a Slow iPad
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-A-Slow-iPad.htm
iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
 Cheers, Tom

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often and while surffing on net it gets very slow ...

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Web pages slow to load with IE11 and the cursor/mouse is very slow to work until after page loads

Web pages are very slow to load, I hve run Norton Eraser and found no issues that would cause this

New HP Pavilion three weeks ago. After several attempts by the 'experts' I finally got a straight answer from a tech in the Philipines yesterday, 01-29-2015. HP and Microsoft are working to resolve the issue of slow pages and a dead cursor until the next page finally loads. You may have discovered that Google Chrome DOES NOT have this issue. Comments about HP would not be allowed here so I will just say, use Chrome until the issue with IE 11 is resolved.

My mac get very hot when I'm working with it is it normal??

my mac get very hot when I'm working with it is it normal??

When posting in Apple Communties/Forums/Message Boards.......It would help us to know which MBP model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
***This will help in providing you with the proper and/or correct solutions.***
============
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.

OAS 4.0.7 on SUSE Linux 6.1 gets very slow or hangs

Hallo out there,
we installed OAS 407 on a SUSE Linux 6.1 system with ORACLE
Server 8.0.5.0.0. After long time solving installation problems,
we are now able to start OAS via the OAS-Manager html page.
And we are able to launch a simple PL/SQL-application, which
produces the output of a system table. Now, the thing is, that we
can start this application once or twice or maybe a few times
more but then the system hangs or gets very slow, so that only a
hard reboot of the server machine works.
We configured the NR_TASKS parameter in tasks.h to get ulimit to
512 for the user processes. System seemed to work better then,
but maybe only a little bit better.
We have also got problems with domain-names and node-names, which
sometimes are just machinename, then machinename.domainname, then
again machinename.badister.(none) .
If there is anyone out there who has got the same problems or
solved them, please tell me.
Ralf
null

I have wasted a lot of time trying to get OAS 4.0.7 to run with
a 2.2 kernel... it doesn't work, even after you've fixed all the
problems like to ps command for example, the listeners hang. I
now have it working on a 2.0 kernel, which is reasonably stable,
although I have to do a reboot every few days!
Michael Seiwert (guest) wrote:
: Hi,
: I have a problem with installing the OAS 4.0.7 on my SuSE 6.2
: System. The 8i Database works fine.
: 1. When I try to start oasctl start & it complains about my ps
: utils ... Threads not shown etc. ..
: 2. What have to be done to run the Database Browser in
: DBUtilities ?
: Logger Tables, PLSQL Catridge ... are installed!
: 3. How could I check with a little PL/SQL Application that
: the OAS works ??
: 4. I've heard about a patch on "oracle-ftp.oracle.com"
: /patchset/internet/linux/oas40701-patch..
: Maybe this patch solves my problems ???
: I hope someone could help me with my problems!!!
: Thank you very much!
: Micha
null

UIX page run very slow on Jboss

hi.. i am using Jdeveloper 10.1.2 to develop my application and my application containing JSP and UIX pages.At last i deploy it onto Jboss 3.2.7.
It work properly, but i found that each time user access/open a page, which never open before, that page(either UIX or JSP page) show very slow. After that when user open it again, it show out as normal.
Now, the problem is, when user close the browser, open it and access that page again, for JSP, it show out fast, but for UIX, it still take time to show out. I dont know what cause this happen. And i wondering that is that any way to configure ADF UIX in order to increase its performance?
Please give me some suggestions and guides. Thanks in advance.

Hi... is there anybody can help me? thanks..

Iphone 3G gets very slow wifi specially on YouTube

Im having a very strange problem - I seem to be getting very slow internet speeds on my iphone when connected thru wifi - m laptop is on the same network and it goes blazingly fast however my iphone takes almost as much time as it does on edge networks - the youtube loading is so slow that its just not watchable from my iphone - however the same video loads at super speed on my laptop
Ive tried changing the setting from b/g to only b - but it still makes no difference.
If anyone has the same problem or if anyone knows how to help please let me know

Also having exactly the same problem, very low speed with Youtube. I'm using my Iphone 3G with Frtitz! box fon wlan 7140 router and have Internet from Inode Austria. When using my Dell laptop, everything works O.K.

ALSA: snd-via82xx - No sound but system gets very slow

Hello!
I'm using the Onboard sound chip on my Fujitsu-Siemens D1607 mainboard. It' A Sigmatel STAC9758/59 Chip and runs with snd_via82xx module (worked with SuSE 9.1 so far, at least stereo-out but no LineIn). Now when i load the module as discribed in the ALSA howto an unmute Master and PCM i still get no sound, but my system gets very slow (applications start ten times slower, loading websites also takes much more time). But snd_via82xx seems to load without errors.
ArchLinux is uptodate and i'm using a custom Kernel 2.6.7 because i need some special settings for my AVM Fritz!Card DSL.
Does anybody have any hint?
CU ActionNews

Hmm ... is tried it at root only . Strange is that even CD doesn't work. No sound. Unfortunally this config works perfectly under WindowsXP so speakers should work so far. Realy strange .... this is was amixer says:
amixer
Simple mixer control 'Master',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on]
Front Right: Playback 31 [100%] [on]
Simple mixer control 'Master Mono',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off]
Front Right: Playback 0 [0%] [off]
Simple mixer control 'Headphone +3dB Boost',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Headphone Amp',0
Capabilities:
Mono:
Simple mixer control '3D Control - Switch',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control '3D Control Sigmatel - Depth',0
Capabilities: volume volume-joined
Playback channels: Mono
Limits: 0 - 3
Mono: 0 [0%]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on]
Front Right: Playback 31 [100%] [on]
Simple mixer control 'PCM Out Path & Mute',0
Capabilities:
Mono:
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off]
Front Right: Playback 0 [0%] [off]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [off]
Simple mixer control 'Center/LFE Jack',0
Capabilities:
Mono:
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [off]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on] Capture [on]
Front Right: Playback 31 [100%] [on] Capture [on]
Simple mixer control 'Line Input Source',0
Capabilities:
Mono:
Simple mixer control 'LineIn Jack',0
Capabilities:
Mono:
Simple mixer control 'CD',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on] Capture [off]
Front Right: Playback 31 [100%] [on] Capture [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [off]
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mic Boost (+20dB)',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Mic Input Source',0
Capabilities:
Mono:
Simple mixer control 'Mic Select',0
Capabilities:
Mono:
Simple mixer control 'Mic1 Jack',0
Capabilities:
Mono:
Simple mixer control 'Video',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off] Capture [off]
Front Right: Playback 0 [0%] [off] Capture [off]
Simple mixer control 'Phone',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [off]
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Output',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Playback AC97-SPSA',0
Capabilities: volume volume-joined
Playback channels: Mono
Limits: 0 - 3
Mono: 3 [100%]
Simple mixer control 'PC Speaker',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 15
Mono: Playback 0 [0%] [off]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off] Capture [off]
Front Right: Playback 0 [0%] [off] Capture [off]
Simple mixer control 'Mono Output Select',0
Capabilities:
Mono:
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 15 [100%] [on]
Front Right: Capture 15 [100%] [on]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mix Mono',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Exchange Center/LFE',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'External Amplifier',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Front Jack',0
Capabilities:
Mono:
Simple mixer control 'Input Source Select',0
Capabilities:
Mono:
Simple mixer control 'Input Source Select',1
Capabilities:
Mono:
Simple mixer control 'Rear Jack',0
Capabilities:
Mono:
Simple mixer control 'Sigmatel 4-Speaker Stereo',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Sigmatel Surround Phase Inversion Playback ',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'VIA DXS',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 30 [97%]
Front Right: Playback 30 [97%]
Simple mixer control 'VIA DXS',1
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%]
Front Right: Playback 31 [100%]
Simple mixer control 'VIA DXS',2
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%]
Front Right: Playback 31 [100%]
Simple mixer control 'VIA DXS',3
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%]
Front Right: Playback 31 [100%]
Should be ok, but perhaps you guys find something wrong.
in dmesg and /var/log/messages i do not find anything uncommon. Most of the messages are status messages from pppd .
CU ActionNews

Pages gets very slow when working on a long table in a document

Similar Messages

Maybe you are looking for