Pages hanging off display screen

Even with a window minimized as much as possible, my pages hang off the edges of the screen by several inches.
What do I need to do to make the corners of my monitor and the corners of a page the same?
For instance, right now I see the apple Logo top L, the green, red, yellow buttons all off screen to L with this page centered on the screen.
It's been this way a long time, but it may be noteworthy that over TG, hooked it up to hd TV and did mess around with the display in system pref; right now 1920x1080 is checked. But this problem predates that setting.
Advice?
Thanks!
K

what is that little thing on the bottom gray line with the diagonal lines in the right lower corner. sheesh. brain freeze.

Similar Messages

  • In Lion, Safari pages hang in full screen mode.  If you exit full screen mode, the next page you intended to view appears.

    In Lion, Safari pages hang in full screen mode.  If you exit full screen mode, the next page you intended to view appears.
    This happens nearly every time I use Safari.  I will be clicking on links, when it appears to hang.  By exiting full screen mode, upon minimizing the next page I was intending to view appears.  This does not happen on all websites, but many that I visit.

    Here's a stupid question, but I'm sure I'm not the only one - how exactly DO you minimize the safari fullscreen mode??  I keep reading about orange or yellow tabs which don't exist, at least on my 27 iMac. Control m doesn't work either. I wish Apple would have a basic 3 or 4 page instruction manual on this. Unless there are major bugs still.  By the way, this is only one of many problems I'm having with Safari.  Occasionally the tool bar just dissappears. And, don't get me started about how the dock in Lion simply stopped accepting some icons, including Firefox. None of these problems happened when I first installed Lion. Each upgrade seems to have more bugs, not less.

  • In the view of Web Dynpro- "Page cannot be displayed screen"

    Dear All,
    In se80,During ABAP Webdynpro development,in the View "Page cannot be displayed screen" is appearing.....In SICF i have activated almost all services.....can anyone please  help me out,so that i can develop webdynpros plsssss...........
    Regards
    Sajid
    Edited by: shaik sajid on Feb 10, 2009 7:32 AM

    Check Your internet Explorer connection settings Internet Option->Connection->LAN settings.
    Try playing around with it. We had the same problem in the past.
    Greetings
    Prashant
    P.S- Points welcome

  • The firefox page runs off the screen. how to make it fit?

    Firefox runs off my screen (width-wise); how do I make it smaller?

    if you click Ctrl on your Keyboard (Command on the mac) and Mouse Scroll it should zoom out of it

  • Page flew off of screen and I need it back!

    I'm new to Apple (don't judge!) LOL and had a document open and it "flew off the page..." How do I get it back??? Thanks!

    Command + tab keys  will show open apps.  Tab over to the app you want,  or move your mouse to select open app.

  • Best way to clean off display screen

    without harming it.

    Apple recommends a damp piece of microfiber cloth. If you don't have one, you can find one in the optical department at Walmart.
    Good luck!

  • In normal view, half the page disappears off right of screen. in full screen this does not happen. what can be done to correct the screen ratio for normal screen?

    version 5 loaded on windows 7. all went well for a while. one day while using, ratio of normal screen doubled in width; i.e. half the page disappears off the screen to the right (on a wide screen). when full screen mode applied, ratio is fine. it only happens in normal view, which is the usually prefered option. I cannot determine any means within the program to resize the normal screen. nothing else is affected, only mozilla firefox in normal view. not that when program is opened from keyboard the page is correct for a moment, then enlarges the width with 1/2 page dissappearing.

    This issue can be caused by the Babylon Toolbar 1.1.8 extension
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Page cannot be displayed in PI end to end monitoring

    In our production environment we get the 'page cannot be displayed' screen after from end to end monitoring clicking on display.
    We did turn on the monitoring via RWB in 'configuration' on level high for the XIIntergrationServer and XIAdapterFramework and than saved the configuration.
    Our other PI servers work fine.
    Any ideas?
    Already checked not 885405 and 923666

    Hi,
    Please refer http://help.sap.com/saphelp_nwpi71/helpdata/en/98/1ccbed8a233e4ca57d2b938e67c188/frameset.htm
    for the help on configuration of end to end monitoring in RWB. Please note that you have started HTTP services for PMI in SICF or RSXMB_ACTIVATE_ICF_SERVICES.
    As its production system, you can contact your basis team and get check if any system/service user is locked.
    Alternatively , instead of using E2E monitoring we can get most of the PI related information using Message monitoring itsef, i dont use end to end monitoring so often as most info i get from moni trace or message monitoring,component monitoring RWB.
    Best Regards,
    Srinivas

  • Web Query -- Page cannot be displayed

    Hi,
    What parameter controls the time out of a web report.
    I have a query which takes around 16 mins to pull up results when I run it thru RSRT and BEx.
    When the query is run on the web exactly after 13 mins page cannot be displayed screen comes up..
    What parameter controls this time out on the web.
    I have kept icm/keep_alive_timout = 3600..I guess its some other parameter..
    Thanks in advance

    Hi,
    Another setting for HTTP connections is: icm/conn_timeout (value is in milliseconds).
    Some SAP Notes you can refer to on this issue are:
    622130
    192658
    Cheers,
    Rusty

  • Display screen off during phone calls

    Hi Sony, lately my Z1 compact switches off display during phonecalls even when pulled away from my ear thus before setting the power button as an "end calls" option I could not end calls as my display screen is off for close to a minute... What can I do?

    @252293 - If you have a case or screen protector attached, please remove it and tell me if the problem continues.
    @Robertnaples - In your case I can only advise you to speak with your local  Xperia Care team as your handset may require further assessment.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen.  How can I get adobe reader to just display on one screen?

    adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen.  How can I get adobe reader to just display on one screen?
    I want the capability of adobe reader to just run on one screen.

    I had the same problem.
    Try this.
    https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

  • My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working.

    My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.

    Hello Kierasully,
    I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/en-us/ts2570
    Regards,
    -Norm G. 

  • My new version of Firefox (downloaded automatically) on my Mac displays long paragraphs in emails as a single line, so the end of the paragraph is off the screen. How can I make it automatically wrap to fit the screen?

    Long paragraphs in incoming emails display as a single line, with the end of the paragraph running off the screen. I want to make it wrap automatically to fit the screen.

    For the browser window, just drag it to the top left of the screen (click and hold on the top bar with the traffic lights to drag), then in the bottom right of the window you'll see a rectangle with diagonal hatching. Click and hold on that and drag the window to the size you want.
    Clicking on the green dot at top left will expand the window to fit the screen, clicking it again will shrink it back to where it was (this doesn't work in Finder windows quite the same).
    The menu bar size is set in the bowels of the OS, though there may be third-party applications which can alter it.
    As it's size is relative to the screen resolution, you could try reducing the resolution in System Preferences > Displays to see if that would suit you better.

  • HT201263 After updating to the ios6 my ipod was going on and off displaying the apple icon and then had a white screen that had multi colors on it. Then it had a blue screen.plz help me

    I was updating my iPod touch 4g to the ios6 and it told me to hook it up to the iTunes and so I did. After doing that the computer told me to restore I tried and it didn't work. My ipod then was Turing on and off displaying the apple icon then my screen turned white with rainbow colors going down the screen then at some point my ipod had a multi colored blue screen. The screen was no longer blue after I let it die. Plz help I can't find any solutions.

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • I created thirty pages using ipages and my web manager is having difficulty placing them on my website, some change color, some slide off the screen.  Is there a place for problem solving for ipages and website?

    Hi, I thoroughly enjoy the ipage program and prefer it to the similar one offered by Word.  But my web manager is having countless difficulties.  I converted everything to PDF's for him but several of the ipages are loading with a different backround color.  He says he has to meta tag each page since this cannot happen automatically.  On my Mac, the pages are loading after the navigation bar is selected, and it takes about three to four seconds.  On my iphone, however, each page takes at least eight seconds to load and then it slides right off the screen before it can be read.  I really want to continue using ipages to update my website but I am a rookie and do not understand why each ipage cannot simply open when someone goes to my website.  It would be great to do away with the loading of each page and I would like to also minimize any of my margins.  Thanks for any help on this strange matter.  Mary

    Converting pages to pdf is not the usual way make a website.  You may want to try some other app where you can directly create the html which is the customary format for the web.

Maybe you are looking for

  • Restore iMac MA589B/A to original settings

    I want to restore the iMac to its original software. I have misplaced the discs that came with the computer.

  • Measures in the fact table

    Hello, Can i have measures in the fact table in business layer? I am using obiee 11g. like i have a fact table where i have a user i applied aggregation rule of count distinct. Now i would like to add a lower function to it like count (distinct(lower

  • Unable to view planned order from exceptional summary window

    Hello All, I have ran ASCP plan and it details out the exceptions and recommendations, but I am unable to view planned order from exceptional summary window>recommendations>cilck discrete jobs, no planned orders visible. This issue also shows up for

  • HCM EHP5 pre-configured client

    Hello, I need to build ERP EHP5 and load HCM pre-configured client, have been hunting for information with no success, if anyone has done this, can you please share some documentation/links and high level steps ? Thanks...Patrick

  • Having problems with my Broadband and BT will not ...

    Hi For the last TWO years I have had problems with my broadband. The problem is that my hub keeps re-synic it self. Yes I know that this supposed to happen but surly not up to 10 times a day, (some times 6 times in one hour) Every Day. I have no exte