Pages, how to divide endnotes by chapter?

My endnotes need to be at the end of the document, but I need to divide them by chapter, and have the notes for each chapter be numbered starting at 1.
I tried to insert a section break after the first catch of notes for Chapter 1, but it wouldn't me do that. So how do I divide them??
Help!

Try the helpful resources listed her or post in the iOS iWorks forum
https://discussions.apple.com/community/app_store/iwork_for_ios

Similar Messages

  • When I copy and paste a chapter from MS Word into Pages my tables and equations are trashed.  But importing them results in no control over my template How do I get my chapter into my template without copying

    When I copy and paste a chapter from MS Word into Pages my tables and equations are trashed.  But importing them results in no control over my template How do I get my chapter into my template without copying?

    Try just Opening the Word .doc from within Pages and see if that gets closer to what you want, then copy the chapter you want from the Pages version.
    Peter

  • How to divide record per page (20 record per page).

    How to divide record per page (20 record per page).
    I try word (limit) example
    "select * from table1 where [ some_condition]
    limit [start], [end] "
    , but it error.

    Tom Kyte has a rather extensive discussion of paging techniques here: http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:127412348064
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • TS3587 How do you uninstall the Pages add in for Endnote?

    How do you uninstall the Pages add in for Endnote?

    How did you install it?
    It is created by Apple and faulty according to EndNote's support for Pages 5 so I have never tried installing it.
    Peter

  • Pages 5.2 with EndNote Plugin - Slow/laggy/delayed typing

    Pages 5.2
    OSX 10.9
    Apple Pages EndNote plugin 2.0
    EndNote 7.1
    Pages documents without EndNote are fine, but using the Apple EndNote plugin after 2-3 pages with a few references typing gets extremely laggy (up to 1s per character) and seems to get worse as the document gets larger.
    EndNote is 3rd party, but the plugin is developed by Apple and they direct us to Apple support.
    I'm interested in seeing if anyone else using Pages 5.2 and Endnote 7.1 is experiencing anything similar? At the moment support from EndNote on this issue has not been very forthcoming.
    Appreciate any comments if this is occurring for you as well, thanks.

    Definitely, it's like everytime you press a key it's analysing what you are typing. I'm not sure if it is some more advanced feature which could be disabled (there were hits on something similar happening with Word on MacOSX but the tips provided to work-around this didn't apply to Pages, see here - http://community.thomsonreuters.com/t5/EndNote-General/EN-X6-is-slow-as-molasses /m-p/58770#M10513).
    FYI on the different sections, I can say my experience is similar, however not as bad. For me it seemed to get worse the longer the document got. Reproducing it I could easily see from around the 2-3 page with some dummy references the lag was apparent and after 3-4 pages it got even worse.
    Mine is just a college essay, barely 10 pages with around 2-5 references per page, but by the time I got to the end the lag was driving me insane. It's incredibly distracting typing out a sentance and then waiting 5-10s for it to 'appear'.
    I did notice for example that when I inserted a page break at the start, and edited the title page (with no citations) that there was zero lag, but then on other pages which had no citations (abstract) there was still lag. I also found it seemed to especially kick in when spell-checking or attempting to auto-correct words, it would change a slightly incorrect word to something complete garbage (and I think this is part of whatever EndNote is doing I never noticed the Pages spellchecker to be so dysfunctional before).
    Well, we'll see how TR goes. I'm not quite sure if they are actually fixing the issue or just trying to fob me off, I've asked some more direct questions to try and get an indication of if they have actually identified the issue or not. I found it so easy to reproduce without (what I think) any 'custom' thing on my laptop being an issue that hopefully they were able to reproduce just as easily and can investigate a fix.
    Here's hoping they find a fix before I have to write another essay :-)
    I will update if TR comes back with anything concrete.
    And in the mean time if anyone else is facing this same issue please let us know :-)

  • Who knows: How to divide the request.getInputStream()?

    I use a form in a web page to update files, the form code is
    <form action="/Mywork/servlet/fileupdate1" method="post" enctype="multipart/form-data">
    <p>
    Please select a file1 to upload: <input type="file" name="foo">
    </p>
    <p>
    Please select a file2 to upload:<input type="file" name="foo1">
    </p>
    <input type="submit" value="Upload File!">
    </form>
    and the "fileupdate1" servlet which the "action" in the form tag refers to will get the inputstream by
    "ServletInputStream servIn = request.getInputStream();", and create new OutputFileStream in the disk. But
    new files which the servlet stored always have some additional codes "
    -----------------------------7d419320202be
    Content-Disposition: form-data; name="foo"; filename="H:\Documents and
    Settings\administrator\desktop\ee.java"
    Content-Type: application/octet-stream
    If I updating two files, each file will has these kinds of codes and the two files only have one inputstream. I don't
    how to remove these additional codes and how to divide the stream into pieces according to the updated-file-size.
    I don't know wether I say it clearly?And
    does anyone know the reasons and can help me?
    Thank you very much.

    Use something like Jakarta Commons FileUpload to process the multipart/form-data request:
    http://jakarta.apache.org/commons/fileupload/

  • How to divide the request.getInputStream()?

    I use a form in a web page to update files, the form code is
    <form action="/Mywork/servlet/fileupdate1" method="post" enctype="multipart/form-data">
    <p>
    Please select a file1 to upload: <input type="file" name="foo">
    </p>
    <p>
    Please select a file2 to upload:<input type="file" name="foo1">
    </p>
    <input type="submit" value="Upload File!">
    </form>
    and the "fileupdate1" servlet which the "action" in the form tag refers to will get the inputstream by
    "ServletInputStream servIn = request.getInputStream();", and create new OutputFileStream in the disk. But
    new files which the servlet stored always have some additional codes "
    -----------------------------7d419320202be
    Content-Disposition: form-data; name="foo"; filename="H:\Documents and
    Settings\administrator\desktop\ee.java"
    Content-Type: application/octet-stream
    If I updating two files, each file will has these kinds of codes and the two files only have one inputstream. I don't
    how to remove these additional codes and how to divide the stream into pieces according to the updated-file-size.
    I don't know wether I say it clearly?And
    does anyone know the reasons and can help me?
    Thank you very much.

    Well, if you know the format, you'd know that the file data starts after the first blank line (\r\n\r\n).
    But why don't you just use Jakarta Commons File Upload or some other existing free package to handle multipart forms and save yourself the trouble.

  • How to divide the iview into frames?

    Hi Experts,
                  Please tell me how to divide the iview into frames.Kindly provide the   steps.Its urgent.
    Regards,
    Nutan

    Hi Nutan,
    Now its clear!!
    If I understand right. You want an overview page full of links to go to your different pages?
    Or maybe you want a link form each page to go to another page?
    In Portal Navigation through hyperlinks is possible.
    You can either do that using EPCM.doNavigate("ROLES://...") {check for EPCM API of help.spa.com}
    Or you could do that by simple
    <a href="http://www.sdn.sap.com/irj/portal/myql">CLICK</a>
    {check for Quicklinks on help.sap.com}
    Either way you'll have to make a small JSP for that.
    Hope this helped
    If so kindly reward with points
    Prem

  • I have been sent a 'word document' in which are a series of boxes about thirty lines long to insure written text. When Pages opens the document it extends these to a whole A4 page how do I get it to retain the original layout

    I have been sent a 'word document' in which are a series of boxes about thirty lines long to insert written text. When Pages opens the document it extends these to a whole A4 page how do I get it to retain the original layout

    You can't change the way Pages import .doc files.
    It was never written that it reproduce exactly the original one.
    From my point of view, as I refuse to give a cent to M...soft, the best way to deal with documents issued by their Office suite is to use the free libreOffice.
    Yvan KOENIG (VALLAURIS, France) jeudi 7 juillet 2011 11:34:19 iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • When I choose a photo to share on face book a drop down box appears with the message, Face book didn't recognise the information you entered for the account this is my Face book login information I use to access my face book page how can I overcome the b

    when I choose a photo to share on face book a drop down box appears with the message, Face book didn't recognise the information you entered for the account this is my Face book login information I use to access my face book page how can I overcome this.

    Delete abd re-enter your Facebook account information jnder the accounts tab in the iPhoto preferences
    You may also want to take a look at the user tip for Facebook problems
    LN

  • How to divide all textFrames in one-character-per-textFrame?

    Hello:
    How to divide all textFrames in one-character-per-textFrame?
    Example: the textFrame "Letters" will be divided in 7 textFrames: "L", "e", "t", "t", "e", "r", "s".
    Help, please.

    Hi Paul, try this one
    #target Illustrator
    //  script.name = splitSelectedFramesIntoWords2.0.jsx;
    //  script.description = splits selected texFrames into separate words;
    //  script.required = select point text textFrames before running;
    //  script.parent = CarlosCanto;  // 10/14/11
    //  script.elegant = false;
    var idoc = app.activeDocument;
    var sel = idoc.selection; // get selection
    var selCount = sel.length; // count items
    var tFrames = []; // to hold the textFrames
    for (j=selCount ; j>0 ; j--) // loop thru selection & get textFrames backwards
                        tFrames[j-1] = sel[j-1];
    for (k = 0 ; k<tFrames.length ; k++) // loop thru textFrames
                        var xpos = tFrames[k].position[0]; // get x
                        var ypos = tFrames[k].position[1]; // get y
                        var words = tFrames[k].contents.split(/\s/g); // get all words into an array
                        //$.writeln(words);
                        var space = tFrames[k].duplicate(); // dup to get width of a space
                        space.contents = " ";
                        var sw = space.width;
                        space.contents = words[0]; // replace space with first word
                        var w = space.width;
                        var wordCount = words.length; // count words
                        for (i=1; i<wordCount ; i++) // loop thru words
                                            xpos2 = xpos+w+sw; // next words position = previous word pos+width+space
                                            var iword = space.duplicate(); // duplicate previous word
                                            iword.contents = words[i]; // add next word
                                            iword.position = [xpos2,ypos]; // position the character = original position + new width
                                            w = iword.width; // get words width
                                            xpos = iword.position[0]; // get words position
                        tFrames[k].remove(); // remove textFrame

  • How do I change the chapter order in itunes 11.0.4?

    How do I change the chapter order in itunes 11.0.4? The book chapters used to look like the playlists in music. You could ;change how it was sorted by the name time, artist etc. Now there isn't a catagory label and the background is the same color as the background of the book photo.

    Trent o
    Someone else in the forum told me how to do this.  If you have Onyx on your system then select Parameters, iTunes and turn off high contrast mode.  If you don't have Onyx, I'd suggest getting it.  It is freeware and used to help maintain your system.  Good luck
    Paul

  • How can I use a pic from iPhoto as a background for a page, How can I use a pic as a background for a page

    How can I use a pic from iPhoto as a background for a page, How can I use a pic as a background for a page

    cd,
    Insert the picture and position it as you desire
    Make sure the picture is set to Floating in the Wrap Inspector
    Arrange > Send Objects to Background
    Regards,

  • How to print envelopes in pages, How to print envelopes in pages

    How to print envelopes in pages, How to print envelopes in pages

    I presume you are using the Pages application, is that correct?
    So start off by launching Pages and choose one of the regular envelope styles. Traditional works well for me.
    Next go to the File menu and select Page setup. From the menu that says Paper Size select Manage Custom Sizes. In the resulting dialog, there should be a button on the left labeled "+". Click it. In the Paper Size area, select Width 5 in and Height 7 in. Name the size (where it says "untitled" something descriptive like "5 x 7 envelope". Click the OK button. The Paper Size menu here should now say the description you gave it. Click OK again. Your work area should now be a 5 x 7 envelope.
    Best of luck.
    PS If you are using Word or some other program, the process is probably the same or very similar.

  • Office 365 - sharepoint: In Advanced search Page, How to add custom column under property restrictions

     In Advanced search Page, How to add custom column under property restrictions?

    Hi,
    The Navigation control can be added into your HTML page in the Snippet Gallery:
    The two links below about how to create HTML master page and adding snippets needed into it for your reference:
    http://borderingdotnet.blogspot.jp/2012/12/how-to-create-html-masterpage-for.html
    http://msdn.microsoft.com/en-us/library/office/jj822370(v=office.15).aspx
    Feel free to reply if there still any question.
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

Maybe you are looking for