Pages - how to make a template?

I need to print in two colums, landscape, on both sides of the paper. So far, no problem as my Kyocera 6950 does it automatically. BUT the paper I use has a printed logo on one side (let's call it page nr 1/3/5/7 etc) and I need obviously not to print on that logo which is at the right bottom corner.
Question: do you know someone who can help me do this? I have scanned in the paper, I can attach to an email how I do it at the moment and I want to import from an rtf file the text to be printed (some 200 pages). I don t see any way I can post on this forum the actual papers -
As you guessed: I am a mac user, not a designer :-) and completely lost ...
Mark

Open your home page... create any areas that are going to be 'editable', meaning areas that you are going to change on any child pages created from the template eg: main content area. All other areas will be marked as non-editable. You will not be able to change these areas in the child pages... this would be areas like the header, the menu bar, the footer.
Save as a template. A new folder will be created named Templates, and the file ( with an extension of dwt will be created inside this folder - all done automatically).
When you want to create a new 'child' page from this template...
FILE>New>Create from Template
you'll see a list of templates that you can choose from, the one you save (as above) should be on the list.
More details here:
Using DW Templates:
http://www.adobe.com/devnet/dreamweaver/templates.html
http://www.adobe.com/devnet/dreamweaver/articles/dw_templates.html
However, with a 50 page site you may want to consider using Server Side Includes (SSIs).,
A bit more about SSIs here:
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f 693f21-7b6ca.htm
http://bignosebird.com/ssi.shtml
One major difference between using Templates and SSIs?
When you make a change to a template page, you will need to re-upload all the pages to the server that were changed - may become very tedious if it is a very large site.
With using SSI, you make a change to one file and only have to upload the one file and all pages on the server will be update accordingly.
Nadia
Adobe® Community Expert : Dreamweaver
http://www.perrelink.com.au
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
http://twitter.com/nadiap

Similar Messages

How to make a template in Photoshop CS5?

How to make a template in Photoshop CS5?

That would probably depend on what you mean exactly.
A template for what, which structure, …?

How to make the templates in PAL to 1920 x 1080 ?

Hi there,
I did FILE > OPEN TEMPLATE.
When I was doing projects in Std Def, I select PAL, and there were a lot of templates available in PAL.
But now doing projects in HD, these templates in PAL are too small to superimpose onto the HD videos (in 1920 x 1080).
How to make these templates in 1920 x 1080 ?
Thank you

Ian R. Brown wrote:
I think you are making a big issue of something very simple as it took me less than a minute to test it out.
Make your template or whatever in LT and then select File>Render Movie and make sure that the "Render Background" box is ticked.
Put resulting file in FCE and stretch it as I described earlier.
That's it!
If you don't want your text stretching, you can leave it off the LT movie and add it from FCE's Text functions . . . . . or you could make just the text in LT and add it on a track above the template in FCE.
You need to do some quick experiments (tests) to see how it works for you.
Incidentally, are these third party templates?
If so, you should contact the supplier to see if they have included some HD versions somewhere.
Thanks Ian,
The reason I am asking is bcos I cannot experiment with it as I am not at home. I don't have a Mac with me.
I was hoping that FCE can import as ipr so that I do not have to render each time I make changes.
These templates are extension packs from 12 inch. Dont think they have HD version
Cheers

How to make collage template myself pse8

I would like to be able to make a template with
rows of rectangles, squares or circles for collage work. Are there any tutorials
or can someone point me in the right direction? Thanks

Malloww,
There are several ways to do this. Here is one:
http://www.pixentral.com/show.php?picture=1NmVcTyaLz9i6V7cLOoH4fMslMKr0
Open blank , new file. I used background color=white, but you can use any color. The resolution should be about the same as that of the pictures which you will display, ultimately.
Duplicate background layer, work on background copy layer, and shut off visibility of background layer by clicking on its eye icon in the layers palette
Access the rectangular marquee tool, and in the tool's option bar enter mode>fixed size, and the dimensions for height & width. Drag out the rectangle.
Open a blank layer. This should be at the top in the layers palette
Go to Edit>stroke>inside.. I chose color=red. Make the stroke a good sized width. You can select any color.
Repeat steps 3 & 5 for each position. I have 4 for the purpose of demonstration. Use elliptical marquee tool for circle and ellipse. Hold down shift key as you drag out to get the circle
Go to Layer>merge down (CTRL+E).
Access the magic wand tool, and in the tool's option bar "contiguous" should be checked. Click inside the 4 stroke boundaries, sequentially, each time hitting delete on the keyboard. This will punch a hole in each location. The checkered pattern denotes transparency
Copy, then paste your picture between the background layer and the background copy layer. I did this once here for demonstation
Use the move tool to position the picture
Let us know how you make out.

How to delete a template in pages, how to delete a template in pages

Have looked on forums... 1. Cannot find "Go" on finder menu. 2. No library found. 3 Cannot delete nor can I drag old templates into the trash.
My templates folder is pages is cluttered with old templates. Are they here forever? Or, can they be removed?

Simpler version of deleting templates using Pages:
Utilizing v. 5.5.2
Go to Pages and select New
Select My Templates
If you don't have the right click enabled on your trackpad, click control and select the template you want to delete which gives you the option to Rename or Delete the file.
Hope this helps

How to make a template from an existing document on my ipad Air 2 using word

I want to know if it's possible to make make a template from an existing document on my ipad Air 2 using the free microsoft word app.
Thank you

RAW import is not yet supported. Just guessing that this is what you were trying . - Guido

How to make a template in Pages that wraps to next page

I almost always use my Pages '09 in Layout mode. I have a long document that I supply to vacationers on Cape Cod of all the gluten free restaurants and food stores. It's 17 Pages long. Because places open or close I am doing adding and subtracting of listings all the time so this document is in word processing mode so it automatically reshuffles when I add new places.
I want to brand it a little bit more and each page is going to have a small graphic and one line on the edge that is horizontal (at bottom of page) and one line that is verticle at the left side of the page.
I can't figure out how to do this in Word Processing mode. I can't move the graphics around like I can in Layout mode. I can put them in text boxes and move them that way to the desired locations.
However, if I add text boxes the text isn't wrapping from one page to the next.
I really love Layout mode is there a way to get it to take the over flow of text from page one and put it in the text box on the next page automatically?
I'm not sure how to do this project and I hope someone can give me a quick answer!
Thank you so much ahead of time!
Susan

PF,
If you give us a sample problem, we can suggest an approach.
Jerry

3 column page - how to make each full height of page, with variable content in each?

Hi everyone. . . I'm a relatively unsophisticated page designer, and I appreciate if you excuse my lack of experience. I'm putting together a page for a business. The page has three columns, one of which would be considered to be the main body of the page. . . the one with all the important content. The column on the left is for a navbar and some affiliate badges, and the column on the right will be for an image that describes for the viewer which page they're on.
The question I have is how to, when the content of the center column is very long, make the left and right column divtags extend all the way to the footer, with their borders and background colors, to make a clean page. When the content of the center column is short, like a paragraph or two, the left divtag will have a minimum height due to the presence of the badges, but the right divtag is quite short.
I uploaded a test page here: http://www.thermalifegroup.com/test/about_us.html
Nevermind the visual appearance of the page. . . the spry widget is all over the place, but that's just because I uploaded a few files onto the server. On my pc it's all copacetic and not an issue. The code source is up there, so is the stylesheet.
I'm hoping I can just add a few attributes to the columns so that they automatically reach down to the bottom extents of the page. Thanks for any advice you can throw my way.
Keith

manliusvalerius wrote:
Hi everyone. . . I'm a relatively unsophisticated page designer, and I appreciate if you excuse my lack of experience. I'm putting together a page for a business. The page has three columns, one of which would be considered to be the main body of the page. . . the one with all the important content. The column on the left is for a navbar and some affiliate badges, and the column on the right will be for an image that describes for the viewer which page they're on.
The question I have is how to, when the content of the center column is very long, make the left and right column divtags extend all the way to the footer, with their borders and background colors, to make a clean page. When the content of the center column is short, like a paragraph or two, the left divtag will have a minimum height due to the presence of the badges, but the right divtag is quite short.
I uploaded a test page here: http://www.thermalifegroup.com/test/about_us.html
Nevermind the visual appearance of the page. . . the spry widget is all over the place, but that's just because I uploaded a few files onto the server. On my pc it's all copacetic and not an issue. The code source is up there, so is the stylesheet.
I'm hoping I can just add a few attributes to the columns so that they automatically reach down to the bottom extents of the page. Thanks for any advice you can throw my way.
Keith
in your #main css style add following attributes
float:left
background-color:#eeeeee
u can change ur color
try

Spry Collapsible Panel at bottom of page - how to make the browser scrolldown automatically

The question is -
i have a collapsible panel at the bottom of my page that I'm using as a footer menu.
It is 200px tall. The visitor clicks on "FIND OUT MORE", then the panel opens 200px tall.
I want the viewing area of browser to focus on the content of this panel, and automatically scroll down 200px to accomodate the new real estate at the bottom of the page.
Now they click on it, but then have to manually scroll down.
How can I do this? What do I add to the Spry Collapsible Panel js scripts?
I tried using a tag at the bottom of the 200px but can't get it to work correctly.
Dreamweaver CS5.
thanks

I have been closing IE and reopening it for 7 months now. I don't of any other way to reload an applet.
Jason

IWork Pages - How to make sentences begin with a capital letter?

After loading Mavericks I updated my PAGES app to Version 5.0.
Cannot figure out how to start each sentence with the first letter capitalized automatically.

If 'dropped' that would be a real bummer!
I really would like to purge Microsoft Word 4 from all my Macs. I was really hoping Pages has matured into a modern robust word processor. The opposite seems the case....it seems more basic than the Mac word processors of the late 1980's. Thanks for your input........not good news if true.......but I'm afraid you are right.

I enlarge text size and it goes back to small when I change page,how doI make it permanent?

windows 7: when I enlarge text or font size to my preference it goes back to original when I change a page, I want to set it and forget it thanks.

You can use one of these extensions to set a default font size and page zoom on web pages:
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
*http://kb.mozillazine.org/Zoom_text_of_web_pages

How to make Project Template in MS Project Pro 2013

Dear All,
is there any method by which Standard Template can be build in MS Project Pro 2013 as Global Calendar etc?
As far as i know, we can do this in PWA once we made EPT but looking something by which if project manager wants to create any project then he can choose such template in MS project Pro 2013 itself?
Is there any way?

Just to add on to Guillarme's reply, this might help, if you want to create projects and templates directly in Project Pro 2013, this might help:
http://epmainc.com/blog/creating-project-templates-microsoft-project-2013
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

How to make a custom template the default for Apple Mail (10.7.5)?

Hi,
I'm OK with making a new custom template in Apple Mail. It shows up fine once under "custom" in the stationary pane (and once I take off signature in a new email). But... that's a lot of trouble to go through everytime I want to send an email.
So the question is: can I make my custom template my default for all my emails, unless I want to manually change it? Seems like this should be possible but I can't figure it out and haven't run into any solutions (only on how to make a template).
Do I really have to select it each time?
Best,
Joel

As an FYI: I just solved the problem by going the "low road." I'll be a bit laborious in case someone else wants a solution at a later date (I know I Googled the topic and found nothing). I experimented by simply:
Opening a new email message
Selecting my custom template
Copying the custom signature (Select All)
Opening another new email message
Selecting Edit on the Signature pulldown menu
Hitting the plus symbol to create/add a new signature in the pane
Pasting into the new signature
Naming it
Selecting "Choose signature" at the bottom of the signatures pane
And violà!!
It now appears as a possible selection *and* as the default.
Better yet - it is now my default and will work as a reply to an email.
I think I got it all right in the list above.
OK, granted, this is a pretty simply signature - a list of my website, SoundCloud, twitter etc with those names in bold and a graphic of my color logo - but... it works! YMMV.
Give it to Apple to make it so simple that any fool could do it (that would be me), you wouldn't need a "specialized" app, and - of course - there wouldn't even be instructions on how to do it!
Best,
Joel

How to make a web template as standard template

hi,
we are trying to make the custom web template as the standard template. So, that it would be the basic template when we create a new template.
could anyone let me know how to make the template as default template
Thanks,
raghavendra pothula

Hi:
Try that one in SPRO.
here are steps if u need them.
SPRO
SAP Reference IMG
From here, open tree:
SAP Netweaver
SAP Buss Info Warehouse
Reporting Relevant Settings
BEx Web
Set Standard Web Templates.
Here add for Adhoc analysis and others if needed.
Ram Chamarty
Message was edited by: Ram Chamarthy

How can I change the margin settings in the pages inspector to make them more specific for label templates. I need margins that can be set to hundreths of a centimetre not just tenths.

How can I change the margin settings in the pages inspector to make them more specific for label templates. I need margins that can be set to hundreths of a centimetre not just tenths.

I doubt you need hundreths as you would not even be able to measure that and the printer doesn't hold the paper to those tolerances.
fruhulda is right. Pages accepts higher measure but rounds it in the measure field.
If you want absolute accuarcy you need to set your measures to points. Everything else is being recalculated.
Peter

Pages - how to make a template?

Similar Messages

Maybe you are looking for