Pages: I can't cut and paste sections because selecting a section inactivates the "cut" and "paste" command. Likewise, I can't select adjacent sections because, even with "Shift" key depressed or dragging, the second DESLECTS the first.

I've got a MacBook Pro with iOS Yosemite 10.10.1 with recently updated Pages word processor software that doesn't allow me to select multiple sections; delete a single selected section, cut, copy or paste a section. When I try to select multiple adjacent sections by shift/clicking or by dragging beside the thumbnails, the first section becomes deselected when I hit the second one.
Is my software corrupted?
Should I make an appointment at the "Genius Bar"?

No. Just use Pages '09 if you still have it.
Pages 5 is just missing a lot of features.
Peter

Similar Messages

Why i am unable to select between 2 anchor points with in a object while dragging with direct select

why i am unable to select between 2 anchor points with in a object while dragging with direct selection tool instead it moves

Another option is to temporarily change your view to outline mode, when your done switch back to preview mode. Ctrl-Y or View>Outline {View>Preview} The menu option will change depending on which mode you are in.
And another option, double click on the object in question to place it in Isolation mode. You can now edit to your hearts content. When done, click on the gray border at top of document.
So as you can see there are multiple ways of accomplishing the same thing.

Help!Can't access iCloud (pics apps) even with correct password. Won't download my stored info on my new phone

Help!Can't access iCloud (pics apps) even with correct password. Won't download my stored info on my new phone

That happens because photo stream photos only remain in iCloud for 30 days, even though your last 1000 photo stream photos remain on your devices until deleted. When you enabled photo stream on your iPod 4, you only received photo stream photos from the last 30 days as older photos are no longer in iCloud. If you want to stream these older photos to your new iPod, you will have to create a shared photo stream on your old one that contains these photos (requires iOS 6 or higher) and invite yourself as a subscriber, as explained here: http://help.apple.com/icloud/#/mmc0cd7e99.

My iPhone 4 just turned off... Can't turn it back on even with it on charger. What do I need to do?

My iPhone 4 just turned off... Can't turn it back on even with it on charger. What do I need to do?

Let it charge for about 20 minutes, then do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Unique data record means you can't update a record from ECC with same key.

Unique data record means you can't update a record from ECC with same key fileds right?
Details: For example i have two requests Req1 and Req2 in DSO with unique data record setting checked. on day one Req1 has a filed quantity with value 10 in Active data table. On day two Req1 can not be overwitten from ECC with Req2 with the same key fields but different value 20 in the filed quantity because of the Unique data record settings. finally the delta load fails from ECC going to DSO because of this setting. is it right?
I think we can only use unique record setting going from DSO to cube right?
Please give me a simple scenario in which we can use this setting.
I already search the threads and will assign points only to valuable information.
Thanks in advance.
York

Hi Les,
Unique Data Records:
With the Unique Data Records indicator, you determine whether only unique data records are to be updated to the ODS object. This means that you cannot load a data record into the ODS object the key combination for which already exists in the system otherwise a termination occurs. Only use this setting when you are sure that only unique data records are to be loaded into the ODS object (for example, single documents). A typical application of this is in the loading of mass data. It improves the load performance.
Hope it Helps
Srini

Hp15-r006tu can not increse or decrese bright ness with hot key

sir ..
i purchased a new hp notebook 15-r006tu
some problem are ----------
1 .
i have installed graphics driver but i can not change led display bright ness with hot key ( fn + bright change key ) .
although adaptive bright ness is off ????
2 .
when i want to stop ( wifi and bluetooth ) using hot key fn + network botton button then only bluetooth is off
but wifi is still run .
what is hot key ??? or how i stop wifi ???

Hi pravt_hpr006tu,
I understand that after installing a Graphics card you can no longer adjust that screen brightness or turn off the WiFi with the function keys. I will try my best to help you with this.
For the WiFi, I suggest that you download and install the HP Wireless Button Driver, then follow the steps in this document for Airplane Mode (Windows 8) to make sure this has not been turned on.
For the screen brightness, follow the steps in this document for Resolving Problems with the Brightness of the Display and here is one for Fix : Stuck brightness controls / hotkeys not working in Windows 8 , 7 , Vista & XP for updating drivers. This should help with your brightness issue.
I hope this information helps, please let me know how it goes.
Good luck and have a great day!
I worked on behalf of HP.

MacBook stuck with shift key enabled and numbers not working - even the keyboard app in languages wont type lowercase nor numbers?! Anyone know whats up? no spillage...cant understand why the keyboard app wont do anything.

Anyone have a clue? I can understand the keyboard being broke / shift key being stuck but why in the world would I not be able to type the numbers on the language keyboard app on the operating system? Numbers show up on the app but when I press them I still get the special characters like #^&#* and it wont type lower case. Nothing has ever been spilt, just stopped working one day. Rebooted from Time Capsule restore dated a month ago and its still doing it. (problem started two weeks ago). Only way to get lower case or numbers to actually show up is the copy and paste.
Any help would be amazing!
Details on computer: 13 inch MacBook6, 1 (Late 2009) / Intel Core 2 DUO / 2.26GHZ / 2GB / Memory running Mac OS X Lion 10.7.5

If you can afford it, I would recommend replacing the topcase and keyboard as Apple suggests. If like me, you can't afford it or are open to a hack fix, then read on.
The problem
Yesterday, a little water spilt on my 13" MBP keyboard. I turned it around immediately, drained out the water and used tissue to suck it all up but the keyboard was still acting funny. I turned it off and left it out in the sun for a couple of hours and turned it on again but problems remained. Like Rickdubya, my warranty had run out just a month ago and I knew Apple would not cover this under warranty. I tried to clean the shift keys and left it overnight with some rice on them with hopes that the moisture might get sucked out. Nothing worked. (The rice bit is an urban legend that seems to work with some electronics). Went to the Apple Store this morning and was told that they wouldn't even take out the key and clean it, and that the entire top case would have to be replaced. A total bill of 156 Euros which I cannot afford. I had a USB keyboard that would let me use the Mac for the moment so I decided to try to work out a fix.
Symptoms
- Boots in safe mode everytime (which I later found out was because the shift key is pressed)
- Cannot login because password is in lower case or has numbers
- Cannot boot in super user mode and try to disable keys or override password as some commands won't work in uppercase (I wouldn't recommend this anyway because its super user mode)
- All text is in caps and numbers are symbols as though shift key is always pressed
- Audio doesn't work
- Keyboard viewer would not always show the shift key pressed. The key seemed to get pressed at random
Fix
1. Hold the Option button down on boot to bypass the Safe Mode ensure a normal boot
2. At the login screen, plug in a USB keyboard and enter your password to login
3. Change your password to one that uses all caps and no numbers
4. Download and install KeyRemap4MacBook .
5. Use a combination of the functionalities of the Keyboard Viewer and KeyRemap4MacBook to figure out which shift key is the problem. In my case, I found out that it was only my left shift key.
6. Disable the left/right shift key on KeyRemap4MacBook and click on the 'Reload XML' button to make that take effect.
If only one shift key was the problem, then you are done. If both shift keys were shorted, then its likely other keys are too. In which case you should probably just replace the entire thing. If you think other keys are not affected, then you can use KeyRemap4MacBook itself to remap the shift functionality to a lesser used key like the Left Option key.
7. Under System Preferences > Users & Groups > Login Items , add KeyRemap4MacBook as an application that should start on login. This will ensure that your disable/remap of the shift key is active everytime you login.
Usage change/Things to remember
1. Remember to hold down the Option key everytime the computer boots or reboots to bypass safe mode. The fix above is at the software level. The key is physically still shorted at the hardware level and will affect boot.
2. Remember that at the login screen, the disable/remap is not active. So your password now has to be all caps and only letters.
As soon as I can save some money, I will get my topcase and keyboard replaced but until then this solution works great with minimal change. Hope this helps!

TS3742 I have a kernel panic that doesn't respond to booting up with the shift key depressed.any suggrestions

I have A kernAl panic thAt isn't responding to the shift key being depressed during boot. Any suggestions?

Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. What external devices do you have connected? When trying to troubleshoot problems on a laptop, disconnect all external devices. Do you experience the same problems?
To eliminate RAM being the problem, Look at this link: Testing RAM @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
Do you have an Apple Hardware Test disc (the AHT is on the Install/Restore DVD that came with your Mac)? Running the Apple Hardware Test in Loop Mode is an excellent troubleshooting step for finding intermittent hardware problems. It is especially useful when troubleshooting intermittent kernel panics. If Loop Mode is supported by the version of the Apple Hardware Test you are using, you run the Extended Test in Loop Mode by pressing Control-L before starting the test. Looping On should appear in the right window. Then click the Extended Test button.The test will run continuously until a problem is found. If a problem is found, the test will cease to loop, indicating the problem it found. If the test fails, be sure to write down the exact message associated with the failure.In some cases, RAM problems did not show up until nearly 40 loops, so give it a good run.
May be a solution on one of these links.
http://docs.info.apple.com/article.html?artnum=106227 What's a "kernel panic"? (Mac OS X)
http://www.macmaps.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.index-site.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.thexlab.com/faqs/kernelpanics.html Resolving Kernel Panics
http://www.macfixit.com/article.php?story=20060911080447777 Avoiding and eliminating Kernel panics
http://macosg.com/group/viewtopic.php?t=800 12-Step Program to Isolate Freezes and/or Kernel Panics
 Cheers, Tom

See the changes with shift key

In iPhoto it was possible to see the result of the different effects or changes applied to a photo by pressing the shift key, is it possible to still do it in Photos OXS?

In Edit mode, press the M (for Master) key.

Can't select multiple items with shift key os 10.7

I can use command A to select all, and I can select multiple items with command and individually clicking each one, but not using Shift and clicking on the first and last items. Any ideas?

You need to display the window in column or list view. Shift-clicking items won't do that in icon view.
(64793)

I have My Firefox Sync Key , how can install all my data wich came with that Key?

I need your help I have My Firefox Sync Key Code or Key . how can I add to my new computer ?

Check the Sync options when you have used Sync before and want to keep previously stored data on the Sync server.
* click the "Sync Options" button at the bottom to select what to sync (Sync Options only affect the first sync)
Select this choice if you want to restore data from the Sync server:
* "Replace all data on this device with my Sync data"

The menu bar and task bar are missing. I tried opening in safe mode like instructed but there is no firefox button and I tried opening with shift key down but it doesn't open in safe mode.

all that is showing is bookmark tabs. I can't search or open my home page. I don't have a fire fox button at the top to click on to open in safe mode.

# Maybe you are in ''Full screen'' mode. Use the '''F11''' key to enter or exit this mode.
# Press the '''Alt''' key and while keeping it pressed, press these keys: '''V T M'''. Do you see the menu bar now?

I have many duplicates of contacts on my iphone and can't seem to erase them even with icloud.

I can't seem to erase the duplicate contacts on my phone. When I try I get another one.

http://support.apple.com/kb/HT4083

PS CS2 can't open D80 Raw files even with correct plug-in

I am on a PC running Photoshop CS2. I cannot open RAW images from my Nikon D80. I have installed the Camera RAW plug-in (3.6) as instructed. The files still won't open. I'm very frustrated.

No, you are not doing things correctly yet. The DNG converter is a separate, stand-alone program. It does not require Photoshop or any other program other than your operating system to run. You use it to convert your raw images to the Digital negative (DNG) format, and then you would open those DNG files with Photoshop CS and the correctly installed Camera Raw 2.4. The DNG files still contain all of the raw data, and you can achieve the same results from those files as you can the original raw files from your camera. If you are not willing or able to update your version of Photoshop, then this is the route you will have to go in order to work on your raw images.
Added later: since the DNG converter is a separate program, it can be placed anywhere on your computer. I find it easy to simply leave it on the desktop so that I can drag the images from my camera (via card reader) onto the DNG converter. Then all you have to do is follow the prompts in the DNG converter to configure the conversion the way you want it.

How can I use NSDictionaryControllers for 2 dicts with common key?

I have two dictionaries, both with the same key. Using Interface Builder I can build for each dictionary a two-column table, but I did not find out how to connect their keys so that selecting a line in one table automatically selects the corresponding line in the other table.
Does there exist a binding between the two controllers that solves the problem? If so, how can it be established?
(First I tried to use only ONE table - with 3 columns:. This appeared to me the best way. But again I could not establish the appropriate binding.)

I assume you are using a UITableView to show your data. Remember that the table view does not store your data, only shows a few rows of your collection.
I would detect a selection in one table, then programatically select the row with the same key in the second table. There would be no connection in IB to do that.
Mobile table programming guide:
Table View Programming Guide for iOS
General programming guide:
Table View Programming guide
Jason

Pages: I can't cut and paste sections because selecting a section inactivates the "cut" and "paste" command. Likewise, I can't select adjacent sections because, even with "Shift" key depressed or dragging, the second DESLECTS the first.

Similar Messages

Maybe you are looking for