Pages in offline reading list not available after powering off iPad

Try this on your iPad:
1. In safari, save a few web pages to your reading list
2. Set the iPad to airplane mode
3. Power off your iPad
4. Power it back on
5. Try reading the pages in your reading list
This is what I did when going on a flight. Most of the pages I had saved could not be displayed once in the air. Some pages could be displayed, but only once. Once I left the page, I could it not bring back up a second time.
Does anyone experience the same? In my case, the trigger of the problem seems to be powering off the iPad (which is what you are supposed to do during airplane take off).
Any ideas how I can resolve the issue, other than not powering the iPad off?
Thank you!

I could not reproduce the behavior that you are experiencing in Safari. I have no problems at all using the Reading List in Airplane mode after turning the iPad off and on again. You can try some basic housekeeping stuff with Safari and the iPad.
Clear the Safari cache and see if that helps, reboot the iPad and see if that helps. You can also try closing Safari before you power off so that you are launching Safari all over again rather than just activating it from the inactive state in the task bar.
Go to Settings>Safari>Clear History, Cookies and Data. Clearing history is not a necessity.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit the app completely and relaunch after start up. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad and launch Safari again.

Similar Messages

  • Background Refresh App Not Available After Turn off it

    I've been turn off an app from background refresh list and the app is not more available on it.
    I tried to remove the app and re-install, but the app doesn't appear on the list.
    Anyone have the same problem?

    I read somewhere in the forum, that the recovery mode can be entered by turning the tablet on while pressing power on and volume-up at the same time (and leaving pressed). If that doesn't work try it with power-on and volume-down.

  • Mac mini bluetooth not available after updrading to OSX 10.8

    The bluetooth module is not available  after upgrading to OSX 10.8 on a mac mini late 2009, anyone with this issue?
    Message was edited by: Magnusum

    I have an issue where I get Bluetooth mouse/keyboard at the login screen, but once it goes to the desktop they are both dead. This only happens when I have my Drobos plugged up via FireWire. If I boot without those devices plugged in, it works.
    Anything like that for you?

  • I am able to save pages to my reading list and the list opens when I tap on it but no page show, just a gray screen.  How do I get the reading list to show?

    I am able to save pages to my reading list and the list opens when I when I tap on the icon, but all I get is a gray area and not pages to read.  What am I doing wrong?

    See this - http://kb.mozillazine.org/Sorting_bookmarks_alphabetically

  • Reading list not updating for ipad 2, 6.0

    I had saved a few webpages to my reading list (ones that would usually work) and when I went back to my reading list, the page wasn't listed and all of the pages I had saved to my reading list after I updated to iOS 6 weren't listed. Instead, the saved pages on my reading list I had saved prior to the update were there. Any tips/solutions? Thanks, I appreciate your help!

    It sounds like the iPad was restored from an older backup at the end of the update process. Did you backup the iPad just before you updated the iOS software?

  • Email address for offline reading list

    Where would one send suggestions for apple developers?
    I love the safari offline reading list for my ipad and iphone, but unfortunately I am not always on those devices when I see something I'd like to flag to read later.
    I wonder if they could create an email address where you could send the url for the article/website and it would then appear in your reading list the next time you use your device.  I am often on a work computer which doesn't have safari (and I can't install it).  Would others use this too?

    Hi !
    Just check .......
    Distribution List" data is stored in Table SOOD
    email data is stored for the distribution list in Table SOID
    By email data if you are asking for email address then check below -
    1. There are 2 tables:
    ADR6
    USR21
    2. From Usr21
    Get PERSNUMBER
    ADDRNUMBER
    For BNAME = username
    3. Then
    From ADR6
    Get TEL_NUMBER , etc.
    For Above
    ADDRNUMBER and
    PERSNUMBER
    ~ From Forum.
    Other wise check for tables with SO* in SE11.
    Regds
    Abhishek

  • I deleted a page from my reading list. Is there an "Undo" feature?

    This is not about typing, but undo an action I performed. I deleted the wrong page from the reading list. Can I undo that?

    No. There is no undo for that.

  • Everytime I tried to click something on my computer screen, this thing would jump over to the reading list. Then, after awhile, my computer was running really slow. So, I decided to shut down my computer. Then, I turned it back on, and when I tried to sig

    Everytime I tried to click something on my computer screen, this thing would jump over to the reading list. Then, after awhile, my computer was running really slow. So, I decided to shut down my computer. Then, I turned it back on. When I tried to log on, everything was on caps. But, my keyboard was not on caps lock. I thought that it might work, but then I had to put a dot. And instead it gave me a >, as if I was holding down the shift key, and I wasn't. So, I can't get on my computer, and I need it for school tomorrow. Thanks so much.

    1. Startup in Safe Mode   http://support.apple.com/kb/PH14204
    2. Reset PRAM.  http://support.apple.com/kb/PH4405
    3. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".

  • The page you requested is currently not available. Please try again later .

    The message occurs, when I try to view a message from my PC. On other PCs the problem does NOT occur.
    Original message:
    " The page you requested is currently not available. Please try again later ...
    If you have questions, please send email to [email protected]
    For more information on the Oracle Collaboration Suite features, please refer to Oracle Technology Network"
    Pls help.
    Borys Lubera

    is this related to collab suite. if ys pls post in collab suite forum. this is reports forum

  • Content Server Explorer is not available after sucessful installation of Plumtree Portal

    Content Server Explorer is not available after sucessful installation of Plumtree Portal.
    Please reply us.

    To clarify, do you have the User Profile Service (including MySite Host) up and running on this environment? That's subtley different to the full MySite experience which is clearly not applicable...
    Interesting question - thanks for that. Until now I didn't realise there was a difference.
    The User Profile Service is up and running, but no MySite Host is set. (I don't believe MySite will be available anywhere here. I guess that means there's no valid MySite Host for me to use.)
    Many thanks,
        Geoff

  • DataSource not available after restart

    Hi,
    I have created a new JDBC driver for MS SQL Server 2005 and a custom data source that is using the JDBC driver and that is connecting to my database. Upon creation of the data source, the data source is shown as available (green) and works fine.
    However, when I restart my system, the data source is still there, but is not available (red). When I delete the data source and create it again, it works fine.
    Does anybody know why the data source might be not available after the restart of the server? Any help would be highly appreciated.
    Best regards
    Holger

    I don't know what I should change in the MS SQL Server. And as the DataSource works correctly once I have deleted and recreated it, I would have thought that the problem is somewhere with the application server.
    A colleague of mine is using the same application and is having the same problem, although he independently created his system.
    Best regards
    Holger

  • Is there any way to turn off the download function in safari offline reading list?

    Is there any way to turn off the download function in safari offline reading list?

    Don't think so.  The point of the offline reading list is to allow you to read it later without going online.  It has to download the content to make this possible.

  • Save pages for offline reading in Lumia520 default...

    pages for offline reading in Lumia520 default browser....pls make this option.... in default browser....

    The browser is under Microsofts control, please request that feature from them using the link I gave you on your other post.

  • After updating my ipad through i tunes all my games are not opening, After updating my ipad through i tunes all my games are not opening

    After updating my ipad through i tunes all my games are not opening, After updating my ipad through i tunes all my games are not opening

    This seems to be most common with lower resolution pictures.  You can go into settings > general > accessibility and turn reduce motion motion off and then try to rescale.  Or user a higher resolution picture, which works better with the new OS.

  • After powering off, printer must be reinstalled to work

    HP Photosmart eStation C51; Windows 7 64-bit, received replacement printer in Dec.; replacement Zeen this week. After powering off computer, or power failure, printer is no longer "found" and must be reinstalled. Tried to use "fix" found in Trouble Shooting page. Downloaded "fix", then received message that it did not apply to any product installed on my computer.

    Hi there,
    Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Maybe you are looking for