Pages Installation problems.

I've purchased Pages but can't get it to install on my computer. Every other app loaded fine. Anyone else with this problem?

I also bought an external hard drive from the local Apple Store to use as a new back up and after bringing it home it wouldn't work with Lion - something about how the new OS wouldn't support PC based applications. I called the store to see if this was the case and if I needed to bring the hard drive back - they replied that it had to be my computer because they hadn't 'heard' of any compatibility issues with this. I also mentioned the Pages problem. That's when they insisted I make a 'Genius' reservation and bring the computer in because it HAD to be the computer's fault. Anyway, cutting to the chase, they couldn't get Pages to load from the App Store and the computer is working fine. They partitioned the computer to allow the new external drive to work and they used a disk to load Pages, which, in turn gave me the whole iWorks suite. So, at least for now I have what I need. As for the support from Pages, that's a lost cause - they haven't contacted me in almost a week.

Similar Messages

Installation problems on Solaris 9

I am having issues installing the base software and can't seen to figure
out how get past this. The error message from the installation log is as
follows:
Accept terms of Software License Agreement? [R] y
pwd: cannot determine current directory!
/tmp/installwnaWXF/checkinstallynaWXF: no home directory
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/tta_inst.log, and then try
again.
Cleaning up temporary files...
# cat /tmp/tta_inst.log
**snip**
Processing package instance <tta> from </tmp/ttainst_1/ttapkg.15978/pkg>
Tarantella Secure Global Desktop Enterprise Edition for SPARC Solaris 2.8+
(SPARC) 4.10.903
Tarantella, Inc.
pkgadd: ERROR: request script did not complete successfully
Installation of <tta> failed.
No changes were made to the system.
Script detail for package <tta>
---> checkinstallynaWXF
Any help from here would be appreciated.
gavin

from the diagnostic details:
Architecture           spso0509
Host           SunOS e220r 5.9 Generic_117171-17 sun4u sparc SUNW,Ultra-60
Package           Tarantella Secure Global Desktop Enterprise Edition for
SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Andrew
Fonts (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Hangul
Fonts (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Platform
Identity Pack for SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Security
Pack for SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Windows
Connectivity Pack for SPARC Solaris 2.8+ (4.10.903)
Bill Weir wrote:
Gavin,
Glad you're sorted. Can you confirm that it is 4.10.903 you are using
(not 4.00.903)? I'm concerned if this installation problem is still
present in the later version.
Bill
Gavin Westermann wrote on 31/08/2005 05:00:
Bill - that seems to have done the trick! the installation is now running.
Thanks so much for this.I am running a pair of Sun Ray 170's on my desk
here at home mated to an E220R. I am hoping to use Tarantella to be able
to access and run apps on a win3k server in the same rack.
Gavin
Bill Weir wrote:
Gavin,
This looks like a known problem with TTA 4.00.903 and some Solaris
patches which were distributed at about the same time. However, you say
you're using 4.10.903, and as far as I know the problem should be fixed
in that version.
You could try the workaround described in
http://www.tarantella.com/documentation/sgd/ee/4.0/install.html - search
for "tta_pkgadd" on that page and follow the instructions given there.
Regards,
Bill Weir, Sun Microsystems Inc.
Gavin Westermann wrote on 30/08/2005 05:06:
I am having issues installing the base software and can't seen to figure
out how get past this. The error message from the installation log is as
follows:
Accept terms of Software License Agreement? [R] y
pwd: cannot determine current directory!
/tmp/installwnaWXF/checkinstallynaWXF: no home directory
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/tta_inst.log, and then try
again.
Cleaning up temporary files...
# cat /tmp/tta_inst.log
**snip**
Processing package instance <tta> from </tmp>
Tarantella Secure Global Desktop Enterprise Edition for SPARC Solaris 2.8+
(SPARC) 4.10.903
Tarantella, Inc.
pkgadd: ERROR: request script did not complete successfully
Installation of <tta> failed.
No changes were made to the system.
Script detail for package <tta>
---> checkinstallynaWXF
Any help from here would be appreciated.
gavin

SQL Developer Installation Problems

Hi,
We are trying to find a workable alternative to TOAD and have tried to install SQL Developer with not much success.... I think I am just about to give up but hope this last attempt to post for help can create a miracle.
I would appreciate very much if any one knows of a comprehensive document out there that can help trouble shoot the installation problems.
Let me give you the hardware and software versions first and then the problems.
1) SQL Developer tried: sqldeveloper-1.2.1.3213-no-jre and sqldeveloper-1.2.1.3213
2) JRE tried: JRE 1.5 and JRE 6 (C:\Program Files\Java\jre1.6.0_03)
3) Window: XP Professional version 2002 Service pack 2
4) Hardware: Intel Pentium 4 CPU 2.80 GHz, 1.98 GB of RAM
Problems:
1) SQL Developer could not find native JDBC. I don't understand why, despite all the variables set in Oracleclient10g_basic in the registry, SQL Developer did not seem to be able to find a 10g client on a network drive. I have to install 10g client directly onto my pc (C:\oracle\product\10.2.0\client_1) to solve this problem.
2) SQL Developer abruptly disappeared after database login.
I was able to connect and log into an Oralce 10g database with TNS Connect Identifier approach. There were objects (tables, views, etc) showed up briefly on the left hand side of the SQL Developer and then it just completely disappeared without even an error message or a tearful good-bye.
The only thing I can find is this error log about EXCEPTION_ACCESS_VIOLATION. After hours searching through OTN for possible mentioning of this error with SQL Developer, I found nothing so far.
Why is it so difficult to install SQL Developer? Are there a set of un-spoken pre-requisites that has to be satisfied before it can be installed properly? If so, what are they? Path system variable? Registry? Anything else?
Here's the complete EXCEPTION_ACCESS_VIOLATION error log:
# An unexpected error has been detected by Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x2ca5683c, pid=952, tid=2576
# Java VM: Java HotSpot(TM) Client VM (1.6.0_03-b05 mixed mode, sharing)
# Problematic frame:
# C [OraOCIEI10.dll+0x4f683c]
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
--------------- T H R E A D ---------------
Current thread (0x04330400): JavaThread "Init Insight" [_thread_in_native, id=2576]
siginfo: ExceptionCode=0xc0000005, reading address 0x00000000
Registers:
EAX=0x31a28e40, EBX=0x00000000, ECX=0x03231622, EDX=0x00000000
ESP=0x04b0f168, EBP=0x04b0f1a8, ESI=0x00000001, EDI=0x0413ded4
EIP=0x2ca5683c, EFLAGS=0x00010297
Top of Stack: (sp=0x04b0f168)
0x04b0f168: 00000001 00a3fb8e 0000000a 00000001
0x04b0f178: 0413c78c 00000001 02c52aa8 0000000a
0x04b0f188: 00000020 00a4047e 090ea038 0413def4
0x04b0f198: 03231622 6d8a87b3 032325c1 0413c78c
0x04b0f1a8: 04b0f1d8 2ca57072 0413ded4 032325c1
0x04b0f1b8: 00000001 00000000 03231620 03231622
0x04b0f1c8: 00000000 00000000 00000000 00000000
0x04b0f1d8: 04b0f234 2ca56e06 0413c78c 0413ded4
Instructions: (pc=0x2ca5683c)
0x2ca5682c: 5c 00 a1 80 58 b3 31 88 9f c4 00 00 00 8b 14 98
0x2ca5683c: 8b 0a 81 e1 00 80 00 00 89 4d dc 0f 85 90 03 00
Stack: [0x04ac0000,0x04b10000), sp=0x04b0f168, free space=316k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [OraOCIEI10.dll+0x4f683c]
C [OraOCIEI10.dll+0x4f7072]
C [OraOCIEI10.dll+0x4f6e06]
C [OraOCIEI10.dll+0x419685]
C [OCI.dll+0x7333]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j oracle.jdbc.driver.T2CStatement.t2cParseExecuteDescribe(Loracle/jdbc/driver/OracleStatement;JIIIZZZZ[BIBII[SI[B[CII[SII[B[CII[I[S[BIIIIZZ[Loracle/jdbc/driver/Accessor;[[[B[J[BI[CI[SIZ)I+0
j oracle.jdbc.driver.T2CCallableStatement.executeForDescribe()V+271
j oracle.jdbc.driver.T2CCallableStatement.executeForRows(Z)V+41
j oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout()V+275
j oracle.jdbc.driver.OraclePreparedStatement.executeInternal()I+94
j oracle.jdbc.driver.OraclePreparedStatement.execute()Z+17
j oracle.jdbc.driver.OracleCallableStatement.execute()Z+60
j oracle.dbtools.raptor.insight.CompletionInsight.getInsightableOracleDatabase(Loracle/javatools/db/Database;)Loracle/dbtools/raptor/insight/InsightableDatabase;+70
j oracle.dbtools.raptor.insight.CompletionInsight.<init>(Loracle/ide/Context;Loracle/javatools/db/Database;)V+161
j oracle.dbtools.sqlworksheet.sqlview.SqlEditorMainPanel$5.run()V+52
j java.lang.Thread.run()V+11
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
=>0x04330400 JavaThread "Init Insight" [_thread_in_native, id=2576]
0x0416ac00 JavaThread "Timer-4" [_thread_blocked, id=1460]
0x0412cc00 JavaThread "Timer-3" [_thread_blocked, id=2544]
0x04323800 JavaThread "WeakDataReference polling" [_thread_blocked, id=3756]
0x0315cc00 JavaThread "Image Fetcher 3" daemon [_thread_blocked, id=3412]
0x02c17c00 JavaThread "Image Fetcher 2" daemon [_thread_blocked, id=2124]
0x04324800 JavaThread "Image Fetcher 1" daemon [_thread_blocked, id=2088]
0x04321800 JavaThread "Image Fetcher 0" daemon [_thread_blocked, id=276]
0x02ca2c00 JavaThread "WaitCursorTimer" daemon [_thread_blocked, id=2096]
0x00296800 JavaThread "DestroyJavaVM" [_thread_blocked, id=3816]
0x02cb0400 JavaThread "Timer-1" [_thread_blocked, id=2832]
0x02c32000 JavaThread "IconOverlayTracker Timer" [_thread_blocked, id=1204]
0x04060800 JavaThread "Log Page Updater" [_thread_blocked, id=2160]
0x03323800 JavaThread "TimerQueue" daemon [_thread_blocked, id=3996]
0x032d1800 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=4004]
0x032ca400 JavaThread "AWT-Windows" daemon [_thread_in_native, id=1488]
0x032c9800 JavaThread "AWT-Shutdown" [_thread_blocked, id=256]
0x032c8400 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=1064]
0x02c0d000 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=2956]
0x02c08400 JavaThread "CompilerThread0" daemon [_thread_blocked, id=3236]
0x02c07400 JavaThread "Attach Listener" daemon [_thread_blocked, id=3248]
0x02c06800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=3232]
0x02bfe400 JavaThread "Finalizer" daemon [_thread_blocked, id=2328]
0x02bfd400 JavaThread "Reference Handler" daemon [_thread_blocked, id=1668]
Other Threads:
0x02bfc000 VMThread [id=2868]
0x02c0e800 WatcherThread [id=2940]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 1536K, used 500K [0x06960000, 0x06b00000, 0x090c0000)
eden space 1408K, 26% used [0x06960000, 0x069bd3b0, 0x06ac0000)
from space 128K, 100% used [0x06ac0000, 0x06ae0000, 0x06ae0000)
to space 128K, 0% used [0x06ae0000, 0x06ae0000, 0x06b00000)
tenured generation total 19372K, used 12857K [0x090c0000, 0x0a3ab000, 0x26960000)
the space 19372K, 66% used [0x090c0000, 0x09d4e400, 0x09d4e400, 0x0a3ab000)
compacting perm gen total 22272K, used 22205K [0x26960000, 0x27f20000, 0x2a960000)
the space 22272K, 99% used [0x26960000, 0x27f0f780, 0x27f0f800, 0x27f20000)
ro space 8192K, 62% used [0x2a960000, 0x2ae614a8, 0x2ae61600, 0x2b160000)
rw space 12288K, 52% used [0x2b160000, 0x2b7a7278, 0x2b7a7400, 0x2bd60000)
Dynamic libraries:
0x00400000 - 0x00423000      C:\WINDOWS\system32\java.exe
0x7c900000 - 0x7c9b0000      C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f5000      C:\WINDOWS\system32\kernel32.dll
0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f02000      C:\WINDOWS\system32\RPCRT4.dll
0x77fe0000 - 0x77ff1000      C:\WINDOWS\system32\Secur32.dll
0x7c340000 - 0x7c396000      C:\Program Files\Java\jre1.6.0_03\bin\msvcr71.dll
0x6d7c0000 - 0x6da0a000      C:\Program Files\Java\jre1.6.0_03\bin\client\jvm.dll
0x7e410000 - 0x7e4a0000      C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f57000      C:\WINDOWS\system32\GDI32.dll
0x76b40000 - 0x76b6d000      C:\WINDOWS\system32\WINMM.dll
0x6d310000 - 0x6d318000      C:\Program Files\Java\jre1.6.0_03\bin\hpi.dll
0x76bf0000 - 0x76bfb000      C:\WINDOWS\system32\PSAPI.DLL
0x6d770000 - 0x6d77c000      C:\Program Files\Java\jre1.6.0_03\bin\verify.dll
0x6d3b0000 - 0x6d3cf000      C:\Program Files\Java\jre1.6.0_03\bin\java.dll
0x6d7b0000 - 0x6d7bf000      C:\Program Files\Java\jre1.6.0_03\bin\zip.dll
0x6d000000 - 0x6d1c3000      C:\Program Files\Java\jre1.6.0_03\bin\awt.dll
0x73000000 - 0x73026000      C:\WINDOWS\system32\WINSPOOL.DRV
0x77c10000 - 0x77c68000      C:\WINDOWS\system32\msvcrt.dll
0x76390000 - 0x763ad000      C:\WINDOWS\system32\IMM32.dll
0x774e0000 - 0x7761d000      C:\WINDOWS\system32\ole32.dll
0x5ad70000 - 0x5ada8000      C:\WINDOWS\system32\uxtheme.dll
0x73760000 - 0x737a9000      C:\WINDOWS\system32\ddraw.dll
0x73bc0000 - 0x73bc6000      C:\WINDOWS\system32\DCIMAN32.dll
0x6d2b0000 - 0x6d303000      C:\Program Files\Java\jre1.6.0_03\bin\fontmanager.dll
0x74720000 - 0x7476b000      C:\WINDOWS\system32\MSCTF.dll
0x7c9c0000 - 0x7d1d7000      C:\WINDOWS\system32\shell32.dll
0x77f60000 - 0x77fd6000      C:\WINDOWS\system32\SHLWAPI.dll
0x773d0000 - 0x774d3000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2982_x-ww_ac3f9c03\comctl32.dll
0x5d090000 - 0x5d12a000      C:\WINDOWS\system32\comctl32.dll
0x77b40000 - 0x77b62000      C:\WINDOWS\system32\Apphelp.dll
0x77c00000 - 0x77c08000      C:\WINDOWS\system32\VERSION.dll
0x03850000 - 0x0386a000      C:\sqldeveloper-1.2.1.3213-no-jre\sqldeveloper\ide\lib\idenative.dll
0x77120000 - 0x771ab000      C:\WINDOWS\system32\OLEAUT32.dll
0x6d570000 - 0x6d583000      C:\Program Files\Java\jre1.6.0_03\bin\net.dll
0x71ab0000 - 0x71ac7000      C:\WINDOWS\system32\WS2_32.dll
0x71aa0000 - 0x71aa8000      C:\WINDOWS\system32\WS2HELP.dll
0x6d590000 - 0x6d599000      C:\Program Files\Java\jre1.6.0_03\bin\nio.dll
0x605d0000 - 0x605d9000      C:\WINDOWS\system32\mslbui.dll
0x6d220000 - 0x6d243000      C:\Program Files\Java\jre1.6.0_03\bin\dcpr.dll
0x71a50000 - 0x71a8f000      C:\WINDOWS\System32\mswsock.dll
0x76f20000 - 0x76f47000      C:\WINDOWS\system32\DNSAPI.dll
0x76fb0000 - 0x76fb8000      C:\WINDOWS\System32\winrnr.dll
0x76f60000 - 0x76f8c000      C:\WINDOWS\system32\WLDAP32.dll
0x66210000 - 0x66219000      C:\WINDOWS\system32\netware\NWWS2NDS.DLL
0x50d50000 - 0x50d98000      C:\WINDOWS\system32\NETWIN32.DLL
0x50d00000 - 0x50d15000      C:\WINDOWS\system32\CLNWIN32.DLL
0x50df0000 - 0x50e10000      C:\WINDOWS\system32\LOCWIN32.DLL
0x50db0000 - 0x50ddc000      C:\WINDOWS\system32\NCPWIN32.dll
0x71ad0000 - 0x71ad9000      C:\WINDOWS\system32\WSOCK32.dll
0x66220000 - 0x6622c000      C:\WINDOWS\system32\netware\NWWS2SLP.DLL
0x66250000 - 0x66257000      C:\WINDOWS\system32\NWSRVLOC.dll
0x76fc0000 - 0x76fc6000      C:\WINDOWS\system32\rasadhlp.dll
0x662b0000 - 0x66308000      C:\WINDOWS\system32\hnetcfg.dll
0x71a90000 - 0x71a98000      C:\WINDOWS\System32\wshtcpip.dll
0x6d560000 - 0x6d569000      C:\Program Files\Java\jre1.6.0_03\bin\management.dll
0x62f00000 - 0x62f13000      C:\oracle\product\10.2.0\client_1\ocijdbc10.dll
0x03e50000 - 0x03ea7000      C:\oracle\product\10.2.0\client_1\OCI.dll
0x2c560000 - 0x31bf6000      C:\oracle\product\10.2.0\client_1\OraOCIEI10.dll
0x77a80000 - 0x77b14000      C:\WINDOWS\system32\CRYPT32.dll
0x77b20000 - 0x77b32000      C:\WINDOWS\system32\MSASN1.dll
VM Arguments:
jvm_args: -Xmx512M -Xverify:none -XX:JavaPriority10_To_OSPriority=10 -XX:JavaPriority9_To_OSPriority=9 -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG=true -Dsun.java2d.ddoffscreen=false -Dwindows.shell.font.languages= -Dide.conf=sqldeveloper.conf -Dide.home.dir.name=.sqldeveloper
java_command: oracle.ide.boot.Launcher
Launcher Type: SUN_STANDARD
Environment Variables:
PATH=C:\oracle\product\10.2.0\client_1;X:\oracle10g\product\10.2.0\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Intel\DMIX;C:\WINDOWS\system32\nls;C:\WINDOWS\system32\nls\ENGLISH;C:\Program Files\IDM Computer Solutions\UltraEdit-32
USERNAME=leexx255
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 2 Stepping 9, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 2
CPU:total 1 (1 cores per cpu, 1 threads per core) family 15 model 2 stepping 9, cmov, cx8, fxsr, mmx, sse, sse2
Memory: 4k page, physical 2079468k(1385300k free), swap 4021668k(3516444k free)
vm_info: Java HotSpot(TM) Client VM (1.6.0_03-b05) for windows-x86, built on Sep 24 2007 22:24:33 by "java_re" with unknown MS VC++:1310
Is this a java problem? SQL Developer problem? Or something else?
Thanks in advance,
a TOAD lover

The problem you are seeing (the EXCEPTION_ACCESS_VIOLATION) is a result of a version mismatch between the JDBC driver being used by SQL Developer and the Oracle client that is found on the path.
This issue only occurs when trying to use the OCI version of the JDBC driver. The simplest fix is to switch to using the basic connection type and thus using the thin (all Java) JDBC driver. As no Oracle client is required in this case, the version mismatch won't be an issue.
However, the connection approach you are using should work, and if you wish to try to sort out the problems there, we should be able to further diagnose the underlying cause of the version mismatch.
To do this, I would need to see what SQL Developer thinks are the potential Oracle client installs, as well as which install it ends up picking. Can you copy/paste the output in the Log Window (Logging Page) that is present after SQL Developer starts (but before you attempt to connect to any database)? There should be a whole series of entries like 'Checking for ORACLE_HOME environment variable' and 'Checking JDBC driver at <some path>'
These log entries are output by SQL Developer as it tries to sort out the various bits of information about Oracle client installs and thus give a peek at the selection logic being used.
Oh, and also - the value of your PATH variable would be useful as well. It may be that there is an Oracle client install on the PATH that supersedes the install SQL Developer is finding via the registry or ORACLE_HOME variable.
- John McGinnis
SQL Developer Team

Adobe Reader XI Installation Problem

I just performed a fresh reload of Windows XP SP3 on one of my computers. After downloading and running the installer for Adobe Reader XI I get the following error pop up:
Internet Explorer Script Error
An Error has occurred in the script on this page.
Line:     1
Char:    10570
Error:    'ActionLaunchReader' is undefined.
Code:    0
URL:     http://127.0.0.1:2469/app/_js/adobe.js
Again I am running Windows XP SP3 with all the patches applied, JRE 7u10 (set as the default for both IE and Firefox), and scripting is enabled in Internet Explorer. I get the exact same error when trying to install the latest version of Adobe Flash Player as well, however, Adobe Shockwave installed just fine.
I am new to this forum, so forgive me if this problem has been posted before. I did not find anything similar in a search. Any help would be greatly appreciated!
Message was edited by: fd2849 Corrected spelling errors.

Yes: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header

WINDOWS INSTALLER PROBLEM WITH DESKTOP MANAGER

Please help!! I am a user of the Blackberry Desk Top Manager, running under Windows XP Service Pack 4.5. I recently downloaded the latest version of Desk Top Manager and I am getting the following error: - Flashing intermittently, whilst running the newly downloaded Desktop Manager - "Windows Installer Preparing to Install". I have removed the programme, downloaded it again from Blackberry's website and run my Windows updates to no available. I have now been advised that I must format my entire computer and reload Windows, which seems to be a rather onerous solution, as I have been using Blackberry's Synchronisation Programme for over a year successfully before this took place. I should appreciate it if you would let me know how this problem on my IBM Think Pad Laptop can be cured.

halimsujanto wrote:
Hi all..
I am having the same problem with desktop software 6, but my problem is more like this..
http://www.blackberry.com/btsc/KB19300
The Windows Installer pop-up during installation and cannot continue, it seems that windows installer 4.5 is the cause, but I cannot uninstall windows installer 4.5 because many of my programs were using this..
In this knowledge base solution it says to run BlackBerry Desktop Software.msi, but on BlackBerry Desktop Software 6, it need to run from setup.exe and cannot continue.. so I cannot install desktop software 6 on my computer, but I am able to install older version desktop software ie. version 4.2 to version 5.
I think that I am gonna reply here instead of making new thread about windows installer 4.5 and Desktop Software 6, please move if I did wrong.
PS. Bifocals..
The link you provided is missing. Or it just back to BlackBerry Technical Solution Center page and I tried searching the KB13781 with no success.
Please if there is other link that may be good for my problem.
Thank you very much.
Hi ihalimsujanto and welcome to the forums!
My first concern is that you do have a version of desktop manager that you can maintain your device and PIM data with, do you?
Please post back with as much detail as possible regarding your hardware and software setup.
Also post what steps you have taken to resolve the issue. The more detail we have the better we can help you. I'll reread KB 19300 and find what happened to my broken link.
Thanks.
Bifocals
EDIT:
ihalimsujanto,
Please review this Microsoft Knowledgebase Article ID: 555175
How to resolve Common "Windows Installer" Problems
Methods 3 and 4 may be pertinent.
Let us know how it goes!
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Dreamweaver Installation Problem

Hi
I have started to download Dreamweaver and shortly after the serial no is accepted the message comes up to close Adobe Bridge CS5 ( Bridge.exe ) - I do not have Bridge open but can remember getting a similar message when I installed PS5 a couple of years ago. Unfortunately I did not note down the solution which was given to me at the time - I think this is also hindering me downloading Bridge updates.
Can any one help ?
Regards
Martin

Thankyou - that worked. Just as a matter of interest why does the process show even if the application has been closed down ?
Date: Thu, 29 Mar 2012 23:46:10 -0600
From: [email protected]
To: [email protected]
Subject: Dreamweaver Installation Problem
    Re: Dreamweaver Installation Problem
    created by Mylenium in Downloading, Installing, Setting Up - View the full discussion
Task Manager --> Processes tab --> Bridge.exe --> right-click --> terminate Mylenium
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4301698#4301698
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4301698#4301698. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

PowerBook installation problems...

Anyone have any ideas on this G4 PowerBook installation problem. I haven't seen anything in any other threads about this...
I purchased a Leopard family pack a week and a half ago and the installation went without a hitch on my Intel Mac Mini. I thought I would give it a try on my G4 PowerBook... A week and a half later I am still trying...
Everytime I try the installation I get about a 1/4 of the way through and if I am lucky (?) a yellow triangle pops up and states that some of the system files were unable to copy onto the Macintosh HD (usually the system just freezes though. I have let it sit for 8+ hours and the progress bar does not move). I have read through the installation log and it has pages and pages of the same error "Unable to locate DB Handler 1". I have tried other installation methods thinking that the system did not like the "Upgrade" option. I have tried "archive and install" and "erase and install" and still nothing. I have even tried putting the Mac Mini in "Target Disc Mode" and installing via Firewire (thought maybe I had a finicky DVD drive in the PowerBook) but I get the same error everytime.
I called Apple that day after purchasing Leopard and after hours of being on hold I was told that the Leopard DVD I purchased is defective (kind of odd since the installation went perfect on the Mac Mini). Apple is supposed be sending me a new DVD but I am still waiting (it has been a week and a half and 2 more calls later).
Anyone have any ideas?

Me and my friend have PowerBooks and we both had this problem too! im almost positive the disc isnt defective because mine has worked great on other computers too. Anyways i found a solution to this problem. Restart your PowerBook holding "T" then it will go into Firewire mode. Connect a firewire cable to the Mac mini and a hard drive should show up on the desktop of the Mac Mini (thats your PowerBook hard drive)
Put the Leopard Install DVD in the Mac mini and proceed to install
When install location screen shows up make sure to choose the PowerBook Note: if you dont usually it will default to the other computer and that will clear your hard drive.
Then start installing after this you shouldnt have any problems.
When the computer starts up it will show up on your Mac Mini display all you have to do is shutdown the Mac Mini and Powerbook and disconnect the cord. thats it! Good Luck
Austin

Palm Desktop Installation Problems

When I tried to open my Palm Desktop to sync my Tungsten E, I found that the program had become corrupted and would not open.
I decided that the best way of overcoming this problem was to download a fresh copy of Palm Desktop from PalmOne and re-install. This did not work, as the install kept stopping and a pop-up window would announce that a newer version of Desktop was already installed.
I then tried to un-install whatever remained of Palm using the Windows Add/Remove Utility but it kept telling me that there was a Network problem and would not Un-install even though we are not connected to a network.
Today I learned of the free RevoUninstaller utility which I downloaded, installed and ran. It identified a considerable number of leftover pieces of Palm files, keys, etc. which I allowed RevoUninstaller to delete.
This appears to have eliminated the issue of the "newer version of Desktop is already installed". However, during this new install, while the Palm Desktop InstallShield Wizard is installing "Registering Class Servers", I now get another error message as follows:
Error 1401. Could not create key.
HKey_Users\S-1-5-21-299502267-1123561945-839522115-1006\software \Classes
Verify that you have sufficient access to that key, or contact your support personnel.
This is a single, home-based computer with two Users and not connected to a network. Can anyone help me sort out this problem.
Thanks, Frank
Post relates to: Tungsten E

Thanks for your suggestions.This whole problem started when I was unable to open Desktop and sync my Tungsten E. It appeared that the program had been corrupted. So I tried to uninstall and then reinstall using the downloaded the Desktop software (Win414EN.exe, Version 8.2.160.0) from PalmOne. I kept getting error messages so I followed some of the instructions that I found on previous postings on this forum.
I tried to uninstall the previous version listed on my computer (Version 4.1.0420) using the Windows Add/Remove Programs. This was unsuccessful as it would not uninstall.
I then edited the registry and deleted all evidence of Palm as suggested in the instructions. This also did not fix the problem.
I then downloaded the Windows Installer CleanUp Utility and ran that to try to uninstall Version 4.1.0420. - This was again unsuccessful.
Then I tried to Install (Run) the downloaded "PalmOne Desktop Win414EN.exe, Version 8.2.160.0" software again, the Palm Desktop Install Shield Wizard opened started the installation procedure and an error message opens that states "A newer version of Palm Desktop is already installed". After clicking OK on the error message, Wizard terminates the installation and the page changes and instructs me as follows: "InstallShield Wizard completed. The Wizard was interrupted before Desktop could be completely installed. Your system has not been modified. To install this program at a later time, please run the installation again. "Click Finish to exit the Wizard".
Of course, running the installation again resulted in the same installation problem.
I then did some research on uninstallers and decided to download and install the free utility RevoUninstaller, and ran this utility.
RevoUninstaller identified 153 files, folders, keys, etc. from Palm which I subsequently agreed to delete. The program inserted a Restore Point before deleting all.
I then tried to Install Desktop again from the downloaded software PalmOne Desktop Win414EN.exe, Version 8.2.160.0 as I don't have a PalmOne Desktop CD. I did not get a CD when I purchased my Tungsten E new about 5 or 6 years ago.
During the installation of files, the Palm Desktop InstallShield Wizard gets to Registering Class Servers, stops and puts a new error message: Error 1401. Could not create key. Hkey_Users\S-1-5-21-299502267-1123561945-83952 2115-1006\Software\Classes. Verify that you have sufficient access to that key, or contact your support personnel.
I have several questions,
Did I delete too much?
What is this Hkey and how can I have access to it?
Is there a way to fix this issue?
Thanks for your anticipated help. Merry Christmas.
Frank

Installation problem on Intel

I have tried to install Solaris 8 on my Dell machine.
I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
The first screen says this....
SunOS Secondary Boot version 3.00
WARNING: ACPI Tables not in Reclaim Memory
prom_panic: kmem_free block already free
Entering boot debugger:
[130ee5]:
and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
I don't know what the ACPI tables are .. and how i can fix this...
Anyone who knows this... please help..
Thanx a lot..

I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.

Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp

Help!
I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
HpSdpAppCoreApp
"The feature you are trying to use in on a network resource that is unavailable.
Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
The last time I dug through some files on my own, bad things happened.
Thanks,
C

good gracious, Chris ...
okay, try applying the general advice on installation problems given here:
http://docs.info.apple.com/article.html?artnum=93976
... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
http://consumer.installshield.com/faq.asp#ts
keep us posted.
love, b

Installation problem on SUSE 12.1

Hi
I'm a Linux beginner and I am trying to install LV on SUSE 12.1
I've also posted my problems on Lava:
http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
Any ideas?
Is there a way to debug to see what's going on?
Cheers,
Mike
Solved!
Go to Solution.

Hi Mike,
Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest.
Best,
Dan N
Applications Engineer
National Instruments

Installation Problem on Win8

Hello all
I need your help for troubleshooting an installation problem on a Win8 (x64) client. There is already JavaJRE installed, but we wanted to install some other versions, too. But it didn't work. So we tried to unistall to curently version. This was running badly. Now there entry is removed from windows software, but the software is still on the system. Always if we try to install any java, we get a failure message with no error discription. So we looked for some installation logs, but I can't find the problem. Can you have a look? What can I do?
Thank you guys for your support.
Installation Logs:
java_install.log - Pastebin.com
java_install_reg.log - Pastebin.com
JavaDeployReg.log - Pastebin.com

Hi people!
I have two problems with nokia suite...
first of all I can't install it at my windows 8.1, I receive the message attached...
Second,
in another notebook, all time I tried to update my N8 to Symbian bella I receive a blue screen of death, at windows 8
can somebody help me?
Attachments:
mokiasuit.png ‏13 KB

Installation problem on RHEL4 ..

Installation problem on RHEL4 (Red Hat Enterprise 4) i have
install start at unzip tar.gz and tar -xf .... now i have run
./installFMS it show
./fmsini: error while loading shared libraries: libstdc++.so.5:
cannot open shar
ed object file: No such file or directory
ERROR: Your are running the Macromedia Flash Media Server
installer
on the wrong platform.
it not support for fedora or anything else?
plz help....

would be nice if someone responded to this.... Macromedia
wouldn't have been this lax in giving a reply :) AND they keep up
with OS updates too :)

IF Form region AND report + search tool in same page THEN = problem

Helllo everybody
I posted an initial and now the advanced as I received helpful comments but still is unsolved:
Problem:
If I have a Form, and a Report With a Search feature on the same page the problem is that when I click on the button of Search to find records in the Report, the page reloads as it goes and returs to the server. Alright, however, that reloading causes the Form to submit data while there is no data because I was not working with the Form. When the report gets the "submission of the Form" it receives all empty data and it complains as it cannot have Null values in its rows.
Solution:
The thing would be to tell the form not to submit anything unless expressley pressed the button Create or Save. It seems that these buttons activate when the page is reloaded I mean reloaded by haiving pressed the button Search of the Reports region.
The helpful comments were in the direction of going to Processes, Automatic Row Processing and then choosing a conditional for processing of the Form, that it, it would only activate (submit itself if that condition is met)
So I go to PL/SQL Function body Returning a boolean and I paste this: RETURN :REQUEST IN('SAVE','CREATE');
but the problem continues unsolved, that doesnt help. It must be very close but there is something I am missing
thank you very much
Alvaro
Edited by: user12155340 on 18-Nov-2009 15:04

Hi,
I think this is double post.
BUTTON CLICK ON SEARCH ITEM CAUSES OTHER REGIONS (FORM) IN TABLE TO ERRORS
Please read my last comment from that link.
Application express forum might give you better and precise answer.
You need just figure out how set conditions
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/concept.htm#sthref149
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/concept.htm#sthref237
Br, Jari
Edited by: jarola on Nov 19, 2009 12:51 PM
BTW, I remember that there was just few days ago same kind question answered in Application Express forum.
I post link if I find it. You may try find it also

Xp_logininfo Installation problem

Hello gurus,
I'm facing the same problem as described in this link:
Re: xp_logininfo "Installation problem on windows 2003 with Sql 2005"
the error I get is similiar:
<i>The below message comes from executing the command master..xp_logininfo '<domain>\<user> ' Msg 15404, Level 16, State 11, Procedure xp_logininfo, Line 62 Could not obtain information about Windows NT group/user '<domain>\<user> ', error code 0x534. The statement has been terminated</i>
but I just don't get how to solve it.
-I've tried to use the profiler but didn't find any information that will help me to solve.
-One of the guys wrote to add "logon rights" to the user ... what does it mean ?
Please advice,
Dimitry Haritonov

Hi sven,
Thank you very much for the quick and direct answer.
The problem was that the user that runs the SQL SERVER service didn't have authorization to retrieve information from active directory.
I've changed the service user, run the sapinst again, and after it succeeded I've returned the previous user.
Best regards,
Dimitry Haritonov

Pages Installation problems.

Similar Messages

Maybe you are looking for