Pages Locking Up during long periods of use.

I have had this problem a couple times before and have re-installed the app to no avail.
When I run pages for long periods of time it begins to slow down, lockup, and I evenually lose my document. I can run 6 or 7 apps at the same time, but when I start pages, my CPU use spikes, real RSIZE and VSIZE grow until it simply locks up. I have lost several hours of work as a result. I thought the update would resolve it but has not.
Does anyone have any suggestions or have had similar issues and founf a resolution?

In addition to saving periodically, try closing and reopening your document. Like most Cocoa applications, Pages remembers undo information until a document is closed. This might contribute to the memory usage growing and growing.

Similar Messages

ASCII closes COM port randomly during long periods of unsolicited response monitoring

I have lots of serial ASCII objects monitoring for unsolicited responses (every two seconds, from 20 different COM ports). Randomly, sometimes a few times a day, sometimes no problem for 2-3 days....but the ASCII object somehow lets the COM ports close or it loses contact with the COM port occasionally. All I have to do is go into edit mode and "touch" the properties....such as changing the "Retry Attempts" setting and the communication returns.
There are no alarms logged when this happens!
Ed

Ryan,
I currently use 6 Ascii objects from 6 ports and plan to use 2 more. Unsolicited data arrives every two minutes (as measured by the sending end). I have a button on the panel for each object that I can press to send a request to the sending end. Each of the senders connects to a digi portserver II and is delivered to lookout via an ethernet connection (as a virtual com port). The ethernet connection is routed over various paths including micowave, which could have an occasional traffic interupting fade. One or more of the Ascii objects may fail to respond at any time, but several days may pass without a problem. When a failure is noticed, you can usually select the properties for that object and the problem clears. If instead, you send a request to any of the other Ascii objects , Lookout may just hang (permanet hour glass). When a failure is noticed, if Lookout is then turned off and the offending port is monitored with hyperterminal, the data from the sending port is on time and correctly formatted. The help file has a section "Ascii alarm and error messages" with a section named "Early temination when parsing the response frame". There are a bunch of reasons listed there as to why the Ascii object might not function properly. I've tried everything that I can think of to make this work reliably. Any ideas? See the link for response format information. http://jrcamenzind.googlepages.com/lookout

Intermittant Connectivity Loss During Long Inactivity Periods

I am working with a customer who is experiencing an intermittant loss of network connectivity after (or during) long periods of inactivity, such as overnight. Details of the environment include:
Dell Latitude D820 notebook (integrated wireless disabled)
Cisco Aironet Wireless PC Card Adapter (Aironet 802.11 A/B/G model AIR-CB21AG-A-K9)
Driver version 3.0.0.104 (5-19-2006)
Operating System: WinXP SP2
Notebook Power Management: Disabled
Cisco Wireless Power Management: CAM
(Constantly Awake Mode)
AP: AIR-AP1231G-A-K9, updated to A Radio Module AIR-RM21A-A-K9 (making them A-B-G)
AP Software Version: 12.3(8)JEA1
Any thoguhts and/or suggestions would be appreciated, and I'm happy to supply additional information if desired. Thanks!
Alan

User login might have timed out and may require to re-authenticate which results in loss of connectivity. Upgrade the PC card firmware version.

After updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid

after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm

Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden

RMI Hang after long period of no use

Occaisonally one of our lightly used RMI servers decides to not accept a new connection. This happens after a long period of no use. The last time it happened I captured a thread dump (THREAD DUMP#1) of the RMI server process.
Just for comparison I then started another client and tried to connect again. See THREAD DUMP#2.
Any suggestions where I should start looking in my code? I have checked the Java bugs database without success.
Thanks.
Tom
*** THREAD DUMP #1
*** THREAD DUMP #1
*** THREAD DUMP #1
Full thread dump Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode):
"RMI TCP Connection(5)-156.34.214.173" daemon prio=1 tid=0x082e39b0 nid=0x4f03 waiting for monitor entry [4d247000..4d248854]
     at sun.rmi.server.LoaderHandler.getDefaultCodebaseURLs(Unknown Source)
     - waiting to lock <0x489b0950> (a java.lang.Class)
     at sun.rmi.server.LoaderHandler.loadClass(Unknown Source)
     at java.rmi.server.RMIClassLoader$2.loadClass(Unknown Source)
     at java.rmi.server.RMIClassLoader.loadClass(Unknown Source)
     at sun.rmi.server.MarshalInputStream.resolveClass(Unknown Source)
     at java.io.ObjectInputStream.readNonProxyDesc(Unknown Source)
     at java.io.ObjectInputStream.readClassDesc(Unknown Source)
     at java.io.ObjectInputStream.readArray(Unknown Source)
     at java.io.ObjectInputStream.readObject0(Unknown Source)
     at java.io.ObjectInputStream.readObject(Unknown Source)
     at sun.rmi.transport.DGCImpl_Skel.dispatch(Unknown Source)
     at sun.rmi.server.UnicastServerRef.oldDispatch(Unknown Source)
     at sun.rmi.server.UnicastServerRef.dispatch(Unknown Source)
     at sun.rmi.transport.Transport$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.rmi.transport.Transport.serviceCall(Unknown Source)
     at sun.rmi.transport.tcp.TCPTransport.handleMessages(Unknown Source)
     at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
"RMI TCP Connection(4)-156.34.214.173" daemon prio=1 tid=0x082e13e8 nid=0x4f03 waiting on condition [4d2c8000..4d2c9854]
     at sun.net.www.ParseUtil.decode(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.getPermission(Unknown Source)
     at sun.rmi.server.LoaderHandler.addPermissionsForURLs(Unknown Source)
     at sun.rmi.server.LoaderHandler.access$300(Unknown Source)
     at sun.rmi.server.LoaderHandler$Loader.<init>(Unknown Source)
     at sun.rmi.server.LoaderHandler$Loader.<init>(Unknown Source)
     at sun.rmi.server.LoaderHandler$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.rmi.server.LoaderHandler.lookupLoader(Unknown Source)
     - locked <0x489b0950> (a java.lang.Class)
     at sun.rmi.server.LoaderHandler.loadClass(Unknown Source)
     at sun.rmi.server.LoaderHandler.loadClass(Unknown Source)
     at java.rmi.server.RMIClassLoader$2.loadClass(Unknown Source)
     at java.rmi.server.RMIClassLoader.loadClass(Unknown Source)
     at sun.rmi.server.MarshalInputStream.resolveClass(Unknown Source)
     at java.io.ObjectInputStream.readNonProxyDesc(Unknown Source)
     at java.io.ObjectInputStream.readClassDesc(Unknown Source)
     at java.io.ObjectInputStream.readArray(Unknown Source)
     at java.io.ObjectInputStream.readObject0(Unknown Source)
     at java.io.ObjectInputStream.readObject(Unknown Source)
     at sun.rmi.transport.DGCImpl_Skel.dispatch(Unknown Source)
     at sun.rmi.server.UnicastServerRef.oldDispatch(Unknown Source)
     at sun.rmi.server.UnicastServerRef.dispatch(Unknown Source)
     at sun.rmi.transport.Transport$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.rmi.transport.Transport.serviceCall(Unknown Source)
     at sun.rmi.transport.tcp.TCPTransport.handleMessages(Unknown Source)
     at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
"DestroyJavaVM" prio=1 tid=0x0805b220 nid=0x4f03 waiting on condition [0..bfffc374]
"GC Daemon" daemon prio=1 tid=0x082e74d0 nid=0x4f03 in Object.wait() [4d146000..4d146854]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x44b87598> (a sun.misc.GC$LatencyLock)
     at sun.misc.GC$Daemon.run(Unknown Source)
     - locked <0x44b87598> (a sun.misc.GC$LatencyLock)
"RMI Reaper" prio=1 tid=0x081f5a08 nid=0x4f03 in Object.wait() [4d0c5000..4d0c5854]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x44b86a68> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     - locked <0x44b86a68> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     at sun.rmi.transport.ObjectTable$Reaper.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
"Thread-1" daemon prio=1 tid=0x081f2618 nid=0x4f03 in Object.wait() [4d044000..4d044854]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x44b86d58> (a java.util.TaskQueue)
     at java.lang.Object.wait(Unknown Source)
     at java.util.TimerThread.mainLoop(Unknown Source)
     - locked <0x44b86d58> (a java.util.TaskQueue)
     at java.util.TimerThread.run(Unknown Source)
"RMI TCP Accept-10056" daemon prio=1 tid=0x081f6998 nid=0x4f03 runnable [4cfc3000..4cfc3854]
     at java.net.PlainSocketImpl.socketAccept(Native Method)
     at java.net.PlainSocketImpl.accept(Unknown Source)
     - locked <0x44b86ab8> (a java.net.PlainSocketImpl)
     at java.net.ServerSocket.implAccept(Unknown Source)
     at java.net.ServerSocket.accept(Unknown Source)
     at sun.rmi.transport.tcp.TCPTransport.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
"Signal Dispatcher" daemon prio=1 tid=0x080a5e90 nid=0x4f03 waiting on condition [0..0]
"Finalizer" daemon prio=1 tid=0x08091448 nid=0x4f03 in Object.wait() [41fd8000..41fd8854]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x44b77a08> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     - locked <0x44b77a08> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     at java.lang.ref.Finalizer$FinalizerThread.run(Unknown Source)
"Reference Handler" daemon prio=1 tid=0x080908a0 nid=0x4f03 in Object.wait() [41f57000..41f57854]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x44b77a70> (a java.lang.ref.Reference$Lock)
     at java.lang.Object.wait(Unknown Source)
     at java.lang.ref.Reference$ReferenceHandler.run(Unknown Source)
     - locked <0x44b77a70> (a java.lang.ref.Reference$Lock)
"VM Thread" prio=1 tid=0x0808f660 nid=0x4f03 runnable
"VM Periodic Task Thread" prio=1 tid=0x080a86d0 nid=0x4f03 waiting on condition
"Suspend Checker Thread" prio=1 tid=0x080a5478 nid=0x4f03 runnable
*** THREAD DUMP #2
*** THREAD DUMP #2
*** THREAD DUMP #2
Full thread dump Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode):
"RMI TCP Connection(6)-156.34.214.173" daemon prio=1 tid=0x082e2890 nid=0x4f03 waiting on condition [4d1c6000..4d1c7854]
     at java.io.ObjectStreamClass.matchFields(Unknown Source)
     at java.io.ObjectStreamClass.getReflector(Unknown Source)
     at java.io.ObjectStreamClass.<init>(Unknown Source)
     at java.io.ObjectStreamClass.lookup(Unknown Source)
     at java.io.ObjectStreamClass.<init>(Unknown Source)
     at java.io.ObjectStreamClass.lookup(Unknown Source)
     at java.io.ObjectStreamClass.<init>(Unknown Source)
     at java.io.ObjectStreamClass.lookup(Unknown Source)
     at java.io.ObjectStreamClass.<init>(Unknown Source)
     at java.io.ObjectStreamClass.lookup(Unknown Source)
     at java.io.ObjectOutputStream.writeObject0(Unknown Source)
     at java.io.ObjectOutputStream.writeObject(Unknown Source)
     at sun.rmi.registry.RegistryImpl_Skel.dispatch(Unknown Source)
     at sun.rmi.server.UnicastServerRef.oldDispatch(Unknown Source)
     at sun.rmi.server.UnicastServerRef.dispatch(Unknown Source)
     at sun.rmi.transport.Transport$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.rmi.transport.Transport.serviceCall(Unknown Source)
     at sun.rmi.transport.tcp.TCPTransport.handleMessages(Unknown Source)
     at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
"RMI TCP Connection(5)-156.34.214.173" daemon prio=1 tid=0x082e39b0 nid=0x4f03 waiting for monitor entry [4d247000..4d248854]
     at sun.rmi.server.LoaderHandler.getDefaultCodebaseURLs(Unknown Source)
     - waiting to lock <0x489b0950> (a java.lang.Class)
     at sun.rmi.server.LoaderHandler.loadClass(Unknown Source)
     at java.rmi.server.RMIClassLoader$2.loadClass(Unknown Source)
     at java.rmi.server.RMIClassLoader.loadClass(Unknown Source)
     at sun.rmi.server.MarshalInputStream.resolveClass(Unknown Source)
     at java.io.ObjectInputStream.readNonProxyDesc(Unknown Source)
     at java.io.ObjectInputStream.readClassDesc(Unknown Source)
     at java.io.ObjectInputStream.readArray(Unknown Source)
     at java.io.ObjectInputStream.readObject0(Unknown Source)
     at java.io.ObjectInputStream.readObject(Unknown Source)
     at sun.rmi.transport.DGCImpl_Skel.dispatch(Unknown Source)
     at sun.rmi.server.UnicastServerRef.oldDispatch(Unknown Source)
     at sun.rmi.server.UnicastServerRef.dispatch(Unknown Source)
     at sun.rmi.transport.Transport$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.rmi.transport.Transport.serviceCall(Unknown Source)
     at sun.rmi.transport.tcp.TCPTransport.handleMessages(Unknown Source)
     at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
"RMI TCP Connection(4)-156.34.214.173" daemon prio=1 tid=0x082e13e8 nid=0x4f03 waiting on condition [4d2c8000..4d2c9854]
     at sun.net.www.ParseUtil.decode(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.getPermission(Unknown Source)
     at sun.rmi.server.LoaderHandler.addPermissionsForURLs(Unknown Source)
     at sun.rmi.server.LoaderHandler.access$300(Unknown Source)
     at sun.rmi.server.LoaderHandler$Loader.<init>(Unknown Source)
     at sun.rmi.server.LoaderHandler$Loader.<init>(Unknown Source)
     at sun.rmi.server.LoaderHandler$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.rmi.server.LoaderHandler.lookupLoader(Unknown Source)
     - locked <0x489b0950> (a java.lang.Class)
     at sun.rmi.server.LoaderHandler.loadClass(Unknown Source)
     at sun.rmi.server.LoaderHandler.loadClass(Unknown Source)
     at java.rmi.server.RMIClassLoader$2.loadClass(Unknown Source)
     at java.rmi.server.RMIClassLoader.loadClass(Unknown Source)
     at sun.rmi.server.MarshalInputStream.resolveClass(Unknown Source)
     at java.io.ObjectInputStream.readNonProxyDesc(Unknown Source)
     at java.io.ObjectInputStream.readClassDesc(Unknown Source)
     at java.io.ObjectInputStream.readArray(Unknown Source)
     at java.io.ObjectInputStream.readObject0(Unknown Source)
     at java.io.ObjectInputStream.readObject(Unknown Source)
     at sun.rmi.transport.DGCImpl_Skel.dispatch(Unknown Source)
     at sun.rmi.server.UnicastServerRef.oldDispatch(Unknown Source)
     at sun.rmi.server.UnicastServerRef.dispatch(Unknown Source)
     at sun.rmi.transport.Transport$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.rmi.transport.Transport.serviceCall(Unknown Source)
     at sun.rmi.transport.tcp.TCPTransport.handleMessages(Unknown Source)
     at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
"DestroyJavaVM" prio=1 tid=0x0805b220 nid=0x4f03 waiting on condition [0..bfffc374]
"GC Daemon" daemon prio=1 tid=0x082e74d0 nid=0x4f03 in Object.wait() [4d146000..4d146854]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x44b87598> (a sun.misc.GC$LatencyLock)
     at sun.misc.GC$Daemon.run(Unknown Source)
     - locked <0x44b87598> (a sun.misc.GC$LatencyLock)
"RMI Reaper" prio=1 tid=0x081f5a08 nid=0x4f03 in Object.wait() [4d0c5000..4d0c5854]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x44b86a68> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     - locked <0x44b86a68> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     at sun.rmi.transport.ObjectTable$Reaper.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
"Thread-1" daemon prio=1 tid=0x081f2618 nid=0x4f03 in Object.wait() [4d044000..4d044854]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x44b86d58> (a java.util.TaskQueue)
     at java.lang.Object.wait(Unknown Source)
     at java.util.TimerThread.mainLoop(Unknown Source)
     - locked <0x44b86d58> (a java.util.TaskQueue)
     at java.util.TimerThread.run(Unknown Source)
"RMI TCP Accept-10056" daemon prio=1 tid=0x081f6998 nid=0x4f03 runnable [4cfc3000..4cfc3854]
     at java.net.PlainSocketImpl.socketAccept(Native Method)
     at java.net.PlainSocketImpl.accept(Unknown Source)
     - locked <0x44b86ab8> (a java.net.PlainSocketImpl)
     at java.net.ServerSocket.implAccept(Unknown Source)
     at java.net.ServerSocket.accept(Unknown Source)
     at sun.rmi.transport.tcp.TCPTransport.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
"Signal Dispatcher" daemon prio=1 tid=0x080a5e90 nid=0x4f03 waiting on condition [0..0]
"Finalizer" daemon prio=1 tid=0x08091448 nid=0x4f03 in Object.wait() [41fd8000..41fd8854]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x44b77a08> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     - locked <0x44b77a08> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     at java.lang.ref.Finalizer$FinalizerThread.run(Unknown Source)
"Reference Handler" daemon prio=1 tid=0x080908a0 nid=0x4f03 in Object.wait() [41f57000..41f57854]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x44b77a70> (a java.lang.ref.Reference$Lock)
     at java.lang.Object.wait(Unknown Source)
     at java.lang.ref.Reference$ReferenceHandler.run(Unknown Source)
     - locked <0x44b77a70> (a java.lang.ref.Reference$Lock)
"VM Thread" prio=1 tid=0x0808f660 nid=0x4f03 runnable
"VM Periodic Task Thread" prio=1 tid=0x080a86d0 nid=0x4f03 waiting on condition
"Suspend Checker Thread" prio=1 tid=0x080a5478 nid=0x4f03 runnable

According to this thread dump the remote object is
quite prepared to accept a new connection (waiting in
PlainSocketImpl.accept()) but some other remote method
implementation is blocked reading the RMI header.
Perhaps this is the one that is stalling? You may need
to check for too much synchronization, i.e. possible
deadlocks, in your remote method implementations.I do have a limited amount of synchronization in my server side code (too much code to post here) but if my code is deadlocking then won't I see my method(s) in the stack trace? None of my remote methods are synchronized, just some of the server side methods they call. Also, if my code is deadlocking won't this tend to happen during busy periods rather than slack periods?
I have reviewed my code for synchronization deadlock potential but the logon code only ever locks one object.
Could you tell me the difference between "waiting for condition" and "waiting for monitor"? I assume the "waiting for monitor" means the thread waiting get the lock on an object.
Thanks for your suggestions.
By the way, I forgot to mention in my original post that I'm running Java 1.4.2_05.

Payroll area locked.How to Stop the workflow during this period ?

Dear experts,
In the travel workflows, after all the approvals, there is a standard task(Custom) with a custom method(BUS2089 Enhanced).
This method updates the infotype 2002 (Attendances). This works fine for the whole month except during the payroll run which will be for 3-4 days after 20th of every month.
We have maintained the exception for this when the control record is in the status '1' or '4', by passing a temporary error to the workflow.
SELECT SINGLE * FROM t569v WHERE abkrs = 'Z0'.
IF sy-subrc EQ 0 AND ( t569v-state EQ '1' OR
t569v-state EQ '4' ).
return-message_v1 = 'Employee Master data locked for Payroll'.
exit_return 1001 return-message_v1 return-message_v2
return-message_v3 return-message_v4.
As i understand the workflows can be restarted after solving the temporary errors.But this Temp error will only be solved after the payroll record is becomes 'Exit Payroll'.
The system attempts for 3 times in the period of 30 minutes and then the tempoarry error becomes a permanent error and this way the workflows goes into a permanent error which cannot be restarted even after the payroll is exit.Due to this may workflows are unable to update the Infotyp 2002 however their trips are approved at all levels.
This counter of 3 times and 30 minutes, I belive the system is taking from the error monitoring program (RSWWERRE / SWWERRE) in SWU3.
I am thinking of putting the workflow into 'Wait' state till the period when the Payroll is locked. This way , we can avoid the workflow even from going into temporary error.
Can anyone help in this regard ? Do we need to add a WAIT step in the WF Definition or control in the method code itself ?
Does WAIT UNTIL (ABAP Keyword) works for 3-4 days of payroll run if we implement in the method code itself?
-Anwar
Edited by: Sameer Anwar on Aug 20, 2011 9:44 AM
Edited by: Sameer Anwar on Aug 20, 2011 9:45 AM

Hi Sameer,
But , Can you pls put some more information on why we need to avoid WAIT UNTIL in Tthe ABAP ?
Wait Steps are only used where you have 1 event which the workflow would expect ...moreover this would require more effort in terms of implementation...( you will have to create an event manually after your payroll is open).
I would suggest create an virtual attrubute of the BO which will populate a whetherr the Payroll is locked or unlocked... then use this attribute as a start condition in the conditions tab of your step. this would stop the workflow until the payrol is open...
Regards
Gautam
Edited by: gautam maini on Aug 20, 2011 2:34 PM
Edited by: gautam maini on Aug 20, 2011 2:35 PM

Hello. How can I make it so firefox remembers which links I've visited as on the music singles pages for longer periods of time and more links?

I frequently use the singles pages on wikipedia, for example: http://en.wikipedia.org/w/index.php?title=Category:2012_singles&from=D
So I had already clicked on the links some months ago on the 2012 singles pages, but firefox forgot that I had clicked on the links there. How can I make it so it remembers for longer periods of time without causing problems to firefox? Also, I want it to remember what links I've clicked on the 2013 singles pages, because I am also keeping up with that. Can I tell firefox to remember all history for these pages, such as 2012 singles, or 2013 singles specifically? I just want firefox to remember what links I've visited, as in, the songs in the 2012/2013 singles pages, and not forget those, because I have already downloaded those so I want firefox to keep track. What are my options? Please let me know, and I hope you understand the problem I am describing.

My Firefox remembers history from over a year ago, and unless you are using a setting or external tool to clear it, or load huge numbers of pages/download huge numbers of files, Firefox should pretty easily remember links you've accessed in recent months.
To see what Firefox has computed as the number of URLs to remember, you can check here:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''.hist''' and pause while the list is filtered
(3) Look for '''places.history.expiration.transient_current_max_pages'''
Mine's set to 104858. I don't know how that was determined.

I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or atleast maintain the charg over longer periods of time? I have a dc adapter. thanks

I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or at least maintain the charge over longer periods of time? I have a dc adapter. thanks

You should be able to use the battery if you get a car type charger which recharges mobile devices.
The full size iPads use a 10-12W charger, whereas the mini uses a 5W charger. Many car chargers only supply 5W. But at 5W, the car charger should give you some extra time on your iPad. It would be best to use a 10-12W car charger.
 Cheers, Tom

Am going on a trip for 1 month and am not going to use my iphone during this period so should i charge it full and turn it off or keep it on till the bettery dies or what ,,,pls help???

Am going on a trip for 1 month and am not going to use my iphone during this period so should i charge it full and turn it off or keep it on till the bettery dies or what ,,,pls help???

Discharge it to around 50-60% then completely shut it off. Store at around room temperature. When you return connect the charger and let the battery fully charge.

WARNING: NEW-PAGE PRINT can no longer be used to print dialog box

i am getting a warning as 'NEW-PAGE PRINT can no longer be used to print dialog box'. Please suggest what method can i use otherwise

Please create a screenshot of the problem you're seeing by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

I purchased software during trial period. The trial has now expired, and is blocking my use of the product that I purchased.

I purchased software during trial period. The trial has now expired, and is blocking my use of the product that I purchased.

Post your issue here: Recently active topics in Photoshop Family about Photoshop Lightroom some one from customer service should pick it up.

I lost my ipod and i remotely locked my ipod on the computer using icloud, but when click on find my ipod it says NO DEVICES, how can i get back to the find my ipod page??? pliz help :(

i lost my ipod and i remotely locked my ipod on the computer using icloud, but when click on find my ipod it says NO DEVICES, how can i get back to the find my ipod page??? pliz help

The only way you will be able to track that iPod is if it is turned on and connected to a wifi network by the person that has it.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Can you fix , the fact that If you leave the firefox update window open for a long period (say 20 minutes in the background), then close all other windowns, then choose to install, it uses this extra time to estimate the download?

Can you fix , the fact that If you leave the firefox UPDATE window open for a long period (say 20 minutes in the background), then close all other windows, then choose to download update, it uses this extra time to estimate the download? (Mine said, 12 Hours to start with, but took under 2 minutes!)
== This happened ==
Not sure how often
== When you install update to 3.6.4 (Possibly for every update?)

The download should happen in the background (before you get an update window). I wonder why that didn't happen for you...\
Did you manually check for updates?

My iphone4 keeps shutting off on its own every 24-36 hours and I can't switch it back on unless I plug it into the charger n charge it. I didn't charge the iPhone for a long period the first time I used it and I charge it every night for at least 7 hours.

My iPhone 4 shuts down automatically and I can't turn it back on unless I plug it into charger and charge it. This happens spontaneously. I didn't charge it for a long time before using it for the first time and I charge it nightly for at least 7 hours. What is the problem?

My iPhone 4 shuts down automatically and I can't turn it back on unless I plug it into charger and charge it. This happens spontaneously. I didn't charge it for a long time before using it for the first time and I charge it nightly for at least 7 hours. What is the problem?

IPhone locks up during update/sync

I have synched my prior iPhone for several months so everything was set up fine, but it no longer will allow downloads. Last week, I tried to download the update for iPhone, and it locked up. When I disconnected, the iPhone was ruined, would only accept a download, but then would not complete the download. I got a new iPhone. Now, I have reloaded from a backup, I have the latest version of iTunes, and when I tried to download the latest iPhone update FIVE hours ago, it looked like it was working, but iTunes and the phone are stuck in "Updating iPhone Software." I will have to disconnect again; I cannot stay connected indefinitely. The telephone support is not available (I don't know what their limited hours are), but when I called last Sunday with the same problem, they could only help me redownload iTunes - and that didn't fix my phone. Help!!

I just bought the iPhone and when I brought it home, my phone and computer both locked up during teh software update. I spent an hour on the phone with a very nice lady, but she couldn't help me. She transferred me to a product specialist, and through conversation, we realized that I was the problem. I had my phone plugged into a powered USB hub, and it just would not work that way. I figured that since the hub was 2.0 and was getting power from my outlet, it would be fine. Guess not... As soon as I plugged it directly into my computer USB port and reset everything, it worked fine. I think you said you were using a laptop to sync, so maybe your USB port is just not cutting it. Good luck w/ the fix.

Pages Locking Up during long periods of use.

Similar Messages

Maybe you are looking for