Pages long date has changed

I invoke Command Shift 5 ALL the time to input the long date and time. Before the update either to Pages or Lion I would get this format:
Sunday, July 24, 11 2011:20:42 PM
Now I get this:
Sunday, July 24, 11 11:20:53 PM
Notice it's missing the 20 before the 11 in the year date field.
What happened?
Lion 10.7
Processor 3.4 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6970M 2048 MB

No. But then I am on a PC running XP
I'll check it as soon as I can on a Mac running Lion, when I get to an Apple Store.
Peter

Similar Messages

How to insert data into a table only when data has changed its value (when compared to the previous inserted value)

I wish to insert data into a table only when the value of the inserted data has changed. Thus, in a time series, if the value of the data at time, t-1, is 206 then if the data to be inserted at time t is 206, then it is skipped (not entered).
If the value of the data at time t+1 is 206, it is skipped also; until the value changes, so if the value at t+1 was 205, then that would be inserted, and if at time t+2 the data is 206, it would be inserted too.
What is the best way to do it without increasing overheads?

This view works:
SELECT
i.IDNO,i.[Date],i.[Level]
FROM
mytable i
INNER
JOIN mytable
d
ON
d.IDNO
= i.IDNO-1
WHERE
i.[Level]
<> d.[Level]
on this mytable below. A trigger could be quite useful here although I am cautious using them. However I wish to avoid the overhead by not having a temp table (which could be sizable). mytable below
should give 3 lines. The IDNO is an identity column.
IDNO
Item
Date
Level
1
X24
12/23/13 10:41
22996
2
X24
12/23/13 10:41
22996
3
X24
12/23/13 9:21
23256
4
X24
12/23/13 9:21
23256
5
X24
12/23/13 9:22
23256
6
X24
12/23/13 9:22
23256
7
X24
12/23/13 9:22
22916

Changing Time Zones-Muse Thinks Assets' Data has Changed

I moved to Hawaii this week. Yay!
Changed the Time Zone in Apple's System Preferences. Opened a Muse project. Muse thinks the Assets' data has changed and wants to update all the linked files! I assume that it will then want to re-upload everything when published.
Changed the location back to my original place, and Muse thinks everything is fine.
Adobe InDesign does not have this problem. Neither does Illustrator. Those report links in their files are fine. So, maybe Muse should check System Preferences > Date and Time > Time Zone before saying that an asset has been modified.

This is a bug in iOS5 (don't think it happened in iOS4).
It's now Sunday am, and instead of Cupertino, my IOS5 iPhone now thinks I am in Denver. Apparently, Apple puts the iPhone not into an AZ timezone that doesn't change to DST, but the time zone the phone is currently "in synch" with - CA in the summer, CO in the Winter.
That is fine for current apponintments, and it also does explain while half my appointments in the weeks coming were wrong (off by an hour) until this morning. After all, I didn't stay in Phoenix and the time didn't change, I moved from California to Colorado to keep the same time, so some appointments shifted by an hour.
Let's hope Apple fixes this in time for us in Phoenix not to go back on DST - otherwise, appointments past the time change may or may not be right until all of Phoenix moves from Denver back to Cupertino again!

My billing date has changed, is it going to permanently be the 30th of the month?

My billing date has changed due to the new billing system. The letter I recieved shows August 30, but does that mean every month it will be the 30th?

Hi eric1742,
I apologize for the confusion. Yes this will be the permanent date. Your new payment due date will be at least 21 days after your statement date each month. If this is a different due date than you had previously, and you pay your monthly bill automatically via our automatic bill payment service, then your payment will be withdrawn from your bank account on the new date as per usual. If you pay your bill automatically via your bank, you will need to inform the bank of your new payment due date. Also, your new account number will be on your August 2015 bill. If you use electronic banking to pay your Comcast bill, please remember to update your banking information for your new Comcast account number to avoid a delay in the posting of your payment. If you have further questions or concerns please let me know.

How can I tell if any table data has changed?

HI
I'm in the process of reverse engineering an application. We don't have the source code, so I've been looking to the Oracle 8 database to give me some clues as to what insert, update, delete operations are being performed.
Is there any SQL I could run which would indicate the table data has been changed in some way.
Thanks
Glenn

What's the application architecture? Is this a client/server application? Or a three-tier application? Is there a lot of PL/SQL? Or is all the SQL getting generated in the application and sent to the database? Depending on the architecture, a SQL*Net trace on the client may be appropriate-- that will log the SQL the client app is sending to the server. If you have a three-tier app, though, it may be hard to relate the SQL to a particular operation or to relate the SQL statements to each other. If you have a lot of stored procedures, you'd only see the procedure call, not the SQL the procedure executes.
You could trace a particular database session, which has similar issues in a three-tier environment or if MTS (the precursor to shared server) is in use, but does capture SQL issued by stored procedures. That may put a degree of load on the database server as well.
You could also query the data dictionary (i.e. V$SQL) periodically to see the SQL statements in the shared pool. You have to ensure that you're polling frequently enough to catch SQL statements before they age out of the shared pool and you won't generally be able to relate one statement to another or to a particular application function. But you could see all the SQL the database is executing.
Justin

I have updated to ios5 and latest pages and it has changed table borders and header colours etc, the colour I was using was imported and there border lines are v thick, help has made my docs look rubbish

I have updated o iOS 5 and updated my pages but it as altered my documents, layout, and tables, changing header row colour and thickness of border lines, some thick some thin within same table, if I put default it puts all the lines back, but I only wan them in 2 out f the 4 columns, If I try to change each section then I have to select all borders as default does the whole table, but if I chose all then the order lines are all thick is there any way of changing thickness of lines, and also does anyone know how to pu in a table of contents? I'm currently having to manually put in the info in the table which is v long. Thank you very much

Updated first post with dmesg output. I added all of it, but here's a quick snippet of the tail (which is right after booting up and attempting to autostart SLiM)
[ 13.426857] NVRM: API mismatch: the client has the version 310.19, but
NVRM: this kernel module has the version 304.60. Please
NVRM: make sure that this kernel module and all NVIDIA driver
NVRM: components have the same version.
Why is the kernel getting 304.60 ? That's got to be the issue, but I don't why the kernel is getting 304.60 ...
Output of pacman -Qs nvidia:
local/conky-nvidia 1.9.0-2
An advanced, highly configurable system monitor for X based on torsmo
local/lib32-nvidia-utils 310.19-1
NVIDIA drivers utilities and libraries. (32-bit)
local/libvdpau-git-flashpatch 20120825-1
Nvidia VDPAU library from git with patch to fix flash blue tint and bleed through
local/libxnvctrl 304.51-1
NVIDIA X Ctrl library
local/nvidia 310.19-2
NVIDIA drivers for linux.
local/nvidia-utils 310.19-1
NVIDIA drivers utilities and libraries.

Data has changed after passing through FIFO?

Dear experts,
I am currently working on a digital triangular shaping using the 7966R FPGA + 5734 AI. I am using LabView 2012 SP1.
Some days ago I have encountered a problem with my FIFOs that I have not been able to solve since. I'd be glad if somebody could point out a solution/ my error.
Short description:
I am writing U16 variables between ~32700-32800 to a U16 configured FIFO. The FIFO output does not coincide with the data I have been writing to the FIFO but is rather bit-shifted or something is added. This problem does not occure if I execute the VI on the dev. PC with simulated input.
What I have done so far:
I am reading all 4 channels of the 5734 inside a SCTL. The data is stored in 4 feedback nodes I am applying a triangular shaping to channel 0 and 1 by using 4 FIFOs that have been prefilled with a predefined number of zeros to serve as buffers. So it's something like (FB = Feedback node):
A I/O 1 --> FB --> FIFO 1 --> FB --> FIFO 2 --> FB --> Do something
A I/O 2 --> FB --> FIFO 3 --> FB --> FIFO 4 --> FB --> Do something
This code shows NO weird behaviour and works as expected.
The Problem:
To reduce the amount of FIFOs needed I then decided to interleave the data and to use only 2 FIFOs instead of 4. You can see the code in the attachment. As you can see I have not really changed anything to the code structure in general.
The input to the FIFO is a U16. All FIFOs are configured to store U16 data.
The data that I am writing to the FIFO can be seen in channel 0 of the output attachment.
The output after passing through the two FIFOs can be seen in channel 2 of the same picture.
The output after passing through the first FIFO (times 2) can be seen in channel 3 of the picture.
It looks like the output is bit-shifted and truncated as it enters Buffer 1. Yet the difference between the input and output is not exactly a factor of 2. I also considered the possibility that the FIFO adds both write operations (CH0 + CH1) but that also does not account for the value of the output.
The FIFOs are all operating normally, i.e. none throws a timeout. I also tried several different orders of reading/writing to the FIFOs and different ways of ensuring this order (i.e. case strucutres, flat and stacked sequence). The FIFOs are also large enough to store the amount of data buffered no matter if I write or read first.
Thank you very much,
Bjorn
Attachments:
FPGA-code.png ‏61 KB
FPGA-output.png ‏45 KB

During the last couple of days I tried the following:
1. Running the FPGA code on the development PC with simulated I/O. The behavior was normal, i.e. like I've intended the code to perform.
2. I tested the code on the development PC with the square and sine wave generation VI as 'simulated' I/O. The code performed normal.
3. I replaced the FIFOs with queues and ran my logic on the dev. PC. The logic performed totally normal.
4. Right now the code is compiling with constants as inputs like you suggested...
I am currently trying to get LabView 2013 on the development machine. It seems like my last real hope is that the issue is a bug in the XILINX 13.4 compiler tools and that the 14.4 tools will just make it disappear...
Nevertheless I am still open for suggestions. Some additional info about my FIFOs of concerne:
Buffer 1 and 2:
- Type: Target Scoped
- Elements Requested: 1023
- Implementation: Block Memory
- Control Logic: Target Optimal
- Data Type: U16
- Arbitrate for Read: Never Arbitrate
- No. Elements Per Read: 1
- Arbitrate for Write: Never Arbitrate
- No. Elements Per Write: 1
The inputs from the NI 5734 are U16 so I am wirering the right data type to the FIFOs. I also don't have any coercion dots within my FPGA VI. And so far it has only occured after the VI has been compiled onto the FPGA. Could some of the FIFOs/block memory be corrupted because we have written stuff onto the FPGA too often?

I have updated my webpage - its updated on my remote server "using dreamweaver" and the date has changed, but when i go online to check nothing has changed.

all is connected, dates changed in the remote server, i have cleared my history so that its not just going to its memory but actually looking for the page.
does anyone have any ideas?

I just tried to run your home page through the W3C validator and got this error:
Sorry! This document cannot be checked.
I got the following unexpected response when trying to retrieve <http://www.dsfiresecurity.com.au/>: 500 Can't connect to www.dsfiresecurity.com.au:80 (timeout)
If you made recent changes to your domain name (DNS) configuration, you may also want to check that your domain records are correct, or ask your hosting company to do so.
Nancy O.

Updated app metadata, now release date has changed to Aug. 12 :(

This morning I updated the metadata of the paid version of my app (which was on the front page of the utilities category as an update just appeared a couple of days ago). Now I see that its release date is marked as Aug. 12 (the original release date) and as a result the app is pushed way to the back of the utilities category apps listing. Anyone had this happen to them and can suggest anything to do about it?

Just searched the forum and found a couple of threads on this topic, so as a service to the community, here they are:
http://discussions.apple.com/thread.jspa?messageID=8140542#8140542
http://discussions.apple.com/thread.jspa?messageID=7917099&#7917099

I have updated my iPad 1 to iOS 5.1.1 and I am trying to email a document from pages but it has changed and I don't know how to email directly from pages anymore can someone please help ?

I have updated my iPad 1 to iOS 5.1.1. Now I cannot email from pages . Cannot anyone help me please ?

Hi Lila,
Bring up the document you want to email, and tap the wrench in the upper right-hand corner. Under that Tools icon you will see several options, select Share and Print.
Select Email Document
Then select the document format you wish to send the document in: Pages, PDF, or Word
Tap on one, and the document will format into that selection, and then take you to a blank email page with the document attached and ready to go!
Hope this helps!
Cheers,
GB

Infinity checker date has changed?

It was saying 1st of June but now it says 30th September?
SamKnows still says 1st of June?
http://www.samknows.com/broadband/exchange/SMBB
Ive heard the BT database isn't the best so who is right the BT check or SamKnows?

seab20 wrote:
I’d just go with the database being useless BT have all of their order system completely integrated with it though so even if your exchange is activated and your cabinet has been upgraded if the checker says no that’s the end of it
Yes the databases can be anoying. Your Exchange could have been enabled many months ago, what you need is the info on your cabinet. Is your cabinet going to be FTTC enabled and when .
Is your cabinet enabled, if not have you looked at the PCP-to-postcode-report its an excel file to tell you IF the cabinet will be enabled. Its a 47MB file
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Delivery date keeps changing..!

I bought an iMac 21.5 inch on October 16, 2014 via phone. I made the full payment with my credit card. Received an confirmation e-mail stating that the delivery date is November 3rd, 2014. The next day I received another e-mail saying that the delivery date has changed to 22nd of October, 2014. Since than I've been waiting for the iMac, but have not received it yet! I made numerous phone calls to Apple Store, Turkey. Guess what they couldn't figure out why my shipment date changed and whereabouts of my iMac! Finally I received another mail on 29 October, saying that the iMac is on the way and it will be on my hand on November 12th! Still waiting..! And the world largest, biggest and probably the richest company personell can not give me a reasonable answer to my problem! By the way they confirmed that they have it in their stocks of the day of my purchase...!

You're right. This is a technical site and I shouldn't have posted that message but I had to write about this to someone.. So please excuse my posting. By the way just to let you know I admitted that they have no reasonable answer and apologised. They even told me that they are ready to make an extra 5% discount or I could make a purchase from the online store equivalent to 5% of the total price of iMac!

Partitioning: Easiest way to determine whether partition has changed

Hi all
10gR2 / 11g
Looking for an easy way to determine whether a (read-write) partition holding old data has changed, particularly whether new records have been added (for instance has a new record been added to partition '2005'? - looking for "TRUE" or "FALSE" status on this question). Don't want to set partitions holding old data read-only, it's ok to add 'old' data, just want to know about it.
DB-Trigger would be a way, but that slows down the application somewhat. Taking snapshots of Partition-Views and comparing them?
Any magical idea?
Thanks
Tino

Magic is not required. What you need to do is set the tablespaces of old partitions to READ ONLY and then forget them.
If you make a tablespace READ WRITE then the only way to track changes is if you write code to do so: In advance.

On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed?

On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed? It used to fully lay out the photos so I could add notes and detailed information before I sent them. I am thinking it is something simple that I have just missed...

The "Photos" view has been replaced by the Media Browser.
Most applications will show you the Photos icon in the Sidebar, when you need to select photos in a file chooser dialoge. Mail, Safari, the iWork apps. See Terence Devlin's User Tip: How to Access Files in iPhoto
For example, in the File > Open dialogue in Preview I am seeing this in the sidebar.

Using Long Data type in the Page

Hi ,
I have a page (in multiple page creation form ) which is suppose to contain only the NOTES field of the entity being created . The Notes field is defined as LONG data type in the table.
Two Doubts.
1. As of now in Jdev , u only have Varchar2 data type when assigning to any messageText layout item. What should be the max value set for Max Lenght of this field on the form . I suppose its 32k+ ,since its Long Field .
Anybody has used Long notes field before ??
2. This page has only one item on it , ie Notes ,which i have defined as messageRichText as style. I have been trying to resize this item ,so that it stretches out on entire page . But it just doesnt resizes .. any idea ..below is my PG.xml code
<?xml version = '1.0' encoding = 'UTF-8'?>

<page xmlns:jrad="http://xmlns.oracle.com/jrad" xmlns:oa="http://xmlns.oracle.com/oa" xmlns:ui="http://xmlns.oracle.com/uix/ui" version="9.0.3.8.13_1426" xml:lang="en-US" xmlns:user="http://xmlns.oracle.com/jrad/user" xmlns="http://xmlns.oracle.com/jrad" file-version="$Header$">
<content>
<oa:pageLayout id="NotesMainR" amDefName="oracle.apps.xxi.pro.server.ProAM" windowTitle="Pro Notes" controllerClass="oracle.apps.xxi.pro.webui.ProNotesCO">
<ui:corporateBranding>
<oa:image id="corporateBrandingImage" source="/OA_MEDIA/FNDSSCORP.gif"/>
</ui:corporateBranding>
<ui:contents>
<oa:messageComponentLayout id="ProInfoR" extends="/oracle/apps/xxi/pro/webui/ProInfoRN"/>
<oa:pageButtonBar id="PgButton">
<ui:contents>
<oa:submitButton id="Back" use="/oracle/apps/fnd/attributesets/Buttons/Back" unvalidated="true" serverUnvalidated="false"/>
<oa:submitButton id="Save" use="/oracle/apps/fnd/attributesets/Buttons/Save"/>
<oa:submitButton id="Continue" use="/oracle/apps/fnd/attributesets/Buttons/Continue"/>
</ui:contents>
</oa:pageButtonBar>
<oa:tableLayout id="region3" hAlign="center">
<ui:contents>
<oa:rowLayout id="region4" hAlign="left" vAlign="top" width="100%">
<ui:contents>
<oa:cellFormat id="region5" height="100%" width="100%" hAlign="left" columnSpan="1" vAlign="top">
<ui:contents>
<oa:header id="region6" text="Notes In Table Layout">
<ui:contents>
<oa:messageRichTextEditor id="ProNotesI" maximumLength="20000" viewName="CustomerPOVO" viewAttr="ProNotes" fontBar="true" alignmentGroup="true" tipType="shortTip" prompt="Pro Notes" richTextModeDisplayHeight="100%" richTextModeDisplayLength="100%"/>
</ui:contents>
</oa:header>
</ui:contents>
</oa:cellFormat>
</ui:contents>
</oa:rowLayout>
</ui:contents>
</oa:tableLayout>
</ui:contents>
</oa:pageLayout>
</content>
</page>
any idea??
thanks

Hi Padma,
Thanks for reply !!
The width is still pain point for me ,as i am unable to increase its width .
I tried increasing the width of the table to 100%, however ,it still doesn work .
Any pointers ??
If you have used this widget before , could you assist me with any sample code u hv ??
I would really appreciate it
thanks

Pages long date has changed

Similar Messages

Maybe you are looking for