Pages Not Allowing Borderless Printing

Prior to Pages v5 (2013) I could easily print a document so that it was borderless by going into File -> Page Setup -> Paper Size -> US Letter -> US Letter (Borderless).  Since upgrading to Pages version 5, the application will not remember my setting of Borderless.  I can set it in Page Setup, hit OK, and then immediatly go back into Page Setup and it is off of Borderless again.
I can export the document as a PDF and then print Borderless from Preview, but what a waste of time and effort for something that should just work.  Does anyone have any idea what might be going on and how to resolve it?  Pages v5 is the only application having this issue.
Thanks!

Pages 5 is not just missing 100 features it is riddled with bugs, that Apple is very slow to fix.
Other than playing with the drawing tools, I can see no reason to use it. It is asking for trouble, and very much a waste of time.
Be thankful you have not lost your work… yet.
Peter

Similar Messages

  • Create PDF which does not allow to print

    My customer would like to use smartform HR_ESS_PAYSLIP_TO_PDF. The requirement is to convert the payslip to PDF, not allow to print the PDF.
    The <b>no print</b> information should be included in the document itself.
    I know this is generally possible because there a converters which have these option, e.g. http://www.abxzone.com/abx_reviews/paragon6/article_p3.html see "security ranging".
    How can I set this up using smartforms?
    Kind regards
    Marcus

    HI Paulo,
    Perhaps the Preview preference file is corrupted after the upgrade.
    Delete this file.
    com.apple.Preview.plist
    /Users/YourName/Library/Preferences. Drag that file to the Trash, empty the Trash and restart your Mac.
    See if that makes a difference.
    Also, check the manufacture web site for your printer and see if there are any updates available for your printer model for compatibility with 10.6. That could be part of the problem.
    Some users are having luck with reinstalling the software that originally came with their printers. If you do not have the disk, go to the web site and download the drivers for 10.5. They might work.
    Carolyn

  • Zyxel modem will not allow wireless printing

    My Netopia modem died recently and Eircom sent me a new Zyxel D1000 modem.
    I have a Canon MG7150 wireless printer and I used to be able to wirelessly print from laptop, iPad and iPhone through the Netopia modem.With the new Zyxel modem I cannot connect to the printer at all.From what I have read on this forum there is no fix for this short of buying a different modem.This is not acceptable.Can Eircom provide a modem which allows wireless printing such as the Netopia previously supplied.Otherwise I see little point in remaining an Eircom Broadband customer.

    I found a way to get this working.  In the Home Networking/LAN setup set RIP direction to 'none' and RIP version to n/a or RIP1 depending on what's available.  Also disable IGMP snooping.

  • Rotating pages - not allowed in an unsecured document

    I'm running Adobe Acrobat 9.1.3.  I would like to rotate the even pages of the document 180 degrees.
    When I select the pages in the page view, or use the document menu, the "Rotate Pages" option is not available to me. (it's listed, but greyed out in the document menu).
    When I look at the security options of the document, it is set to "no security" and everything listed is "allowed."  I have no options available to change anything on this page.
    The document was originally submitted as a PDF/A version - I removed this information from the file using the preflight tool.  It still doesn't work.
    Any ideas?

    In the preferences set the entry 'View documents un PDF/A mode' to 'Never'.

  • PREVIEW does not allow to print

    - If you select all pages in a preview and try to print it prints only the first one.
    - If you add PDFs JPGs to a PREVIEW and SAVE it does only save first page.
    (those two problems are snow leopard related because i used to do it on leopard).
    Is anyone know those problems and have any clue how to resolve it?
    best regards,
    Paulo

    HI Paulo,
    Perhaps the Preview preference file is corrupted after the upgrade.
    Delete this file.
    com.apple.Preview.plist
    /Users/YourName/Library/Preferences. Drag that file to the Trash, empty the Trash and restart your Mac.
    See if that makes a difference.
    Also, check the manufacture web site for your printer and see if there are any updates available for your printer model for compatibility with 10.6. That could be part of the problem.
    Some users are having luck with reinstalling the software that originally came with their printers. If you do not have the disk, go to the web site and download the drivers for 10.5. They might work.
    Carolyn

  • Relating the pages not taken by printer properly.

    my printer is not taking pages properly again , also the pages bend towards left side while inserting and sometimes the pages stops in between of inserting.

    Hi @kgr1 ,
    I see that you are having issues with the paper feed on the printer. I would be happy to help you, but I will need some more information.
    What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
    What operating system are you using?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    How to Find the Windows Edition and Version on Your Computer.
    How is the printer connected? (USB/Ethernet/Wireless)
    Thank You. I look forward to hearing from you.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Since upgrading to Lion OS, Firefox (6.0.2) will not allow the print option in Preview (5.5) for PDFs. The Rainbow wheel turns until I eventually force close.

    I cannot print wirelessly to printer or to Evernote, etc. Print option will not work. If I use Safari, the PDF will print.

    Most likely culprits are one of these:
    com.vmware.kext.vmnet          0073.02.98
    com.vmware.kext.vmioplug          0073.02.98
    com.vmware.kext.vsockets          90.1.5
    com.vmware.kext.vmci          90.1.1
    Boot into safe mode, put the machine to sleep, wait about 10 minutes, wake it, and see if the issue persists. If not, dump vmware, restart normally, and repeat the sleep/wake steps.
    See
    What is a kernel panic,
    Technical Note TN2063: Understanding and Debugging Kernel Panics,
    Mac OS X Kernel Panic FAQ,
    Resolving Kernel Panics, and
    Tutorial: Avoiding and eliminating Kernel panics for more details.

  • I have a problem with bookmarks page not allowing me to move up and down the page on the "show all bbokmarks" "bookmarks menu"page

    I am trying to set up Sync to enable me to use bookmarks on my desktop and laptop. When I have either one using sync, I can open the bookmarks page using "show all bookmarks" "Bookmarks menu" .But when i try to navigate the page, the page locks up and I can not page up and down the page. the page seems to be locked. Any ideas or should I delete the account and attempt to start over?

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    You can also try to repair the places database with this extension:
    *https://addons.mozilla.org/firefox/addon/places-maintenance/

  • Printer driver will not allow color printing

    I have a new Windows 7-64 bit OS on my new computert, and an HP CP1518ni (1500 series) color laserjet printer that has worked fine under Vista (32 bit) previously.
    I went to the driver support site, since my installation disk didn't enable Windows 7, and got the universal UPD PCL6 driver, as indicated, and downloaded it (upd-pcl6-x64-5.4.0.11744.exe) and ran it.  
    It prints just fine in B&W, not in color.  When I go to printer preferences it just says "color - no" and there I'm stuck. 
    Can anyone help?  I can't use a B&W printer for all my work, so I can't switch to this better computer yet. 
    RDF78

    to KB123:
    did you remember setting your driver to only print in grayscale? since there is an option to do that on the drivers installed on your computer.
    If you're not sure, try to go to your printer icon under Printers and Faxes (for windows XP) or PRINTERS (for Vista and 7)
    Right click the printer icon and go to printing preferences. Under FEATURE tab, see if there is a check mark on the print in grayscale (its somewhere almost at the bottom of the screen)
    Or else, try to uninstall the drivers of your printer and re.install.
    ---Click KUDOS if you want to say THANKS.

  • My printer has a ornge led blinking and does not allow me to print any document. how can I fix it?

    My printer is showing an error and the orange led is blinking ans dos not allow to print any document

    Hello HP-1400. I understand your printer is an error state, which is preventing you from printing. I will do my best to assist you! Please provide the following information so I can perform troubleshooting:
    The printer model number. For assistance in locating this information, please reference this HP document: http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&dlc=en&docname=bpy21016
    Your operating system. If you require assistance locating this information, please reference this website: http://windows.microsoft.com/en-CA/windows/which-o​perating-system
    Please respond as soon as possible. I'm only here to help!
    Mario
    I worked on behalf of HP.

  • J4550 error message "Alignmnet page not detected" -alignment page prints ok

    j4550 Printer will not align. Alignment page prints correctly (per HP website), but scanning page gives an error message "Alignment page not found". Printer copies fine. Default alignment results in blurred printing.

    Hello , Welcome to the thread!  I understand that your HP Officejet Pro 8500 All-in-One A909a Printer is experiencing Printhead and Alignment failures. Because you have already replaced both the Cyan and Magenta Printhead (twice) and Black and Yellow Printhead in the past and the issues continue to occur over time I believe that the Printhead sensor or print system within the actual printer is going. Should this occur then print system issues, such as Alignment, Printhead, cartridge, quality, etc issues will occur and will usually become worse over time. Therefore, rather then replacing the Printheads it may be time to replace the actual printer. With that being said, there are a few troubleshooting steps that I would like you to complete to resolve this issue.   To start, please click here . Once the support document opens please review all of the listed Solutions and sub-steps to ensure that all steps have been completed. Should the issue persist, then a Firmware Update may be needed on your printer. However, I do need to know what Operating System you're using on your computer in order to provide you with the correct Firmware Update. The Firmware is the internal programming within your printer. It controls what your printer does and how your printer does it. If there is a corruption within the internal programming in your machine, your HP Officejet may not respond correctly.   Please respond to this post with the result of your Alignment Failed troubleshooting. Should the issue persist, be sure to include your Operating System in your response so I can provide you with the additional Firmware Update. I look forward to hearing from you!

  • No borderless printing; cannot print via imagebrowser...Please...help!

    I can no longer print 4x5 borderless photos (or any photos) from imagebrowser to my i850 canon printer. I have version 6.0.2.38(7L) of Imagebrowser with Leopard installed on my Mac. I select the print option, and then it says to click on Page Setup for borderless printing. The only option I get there is 4x6 (with a border)??? There is no 4x6 borderless like I used to have with the old imagebrowser and system. I set up the print dialogue box to select the "best" picture (used to have a setting for high quality pictures???) and then I click on "Print" and nothing happens. It never goes to printer and I can't cancel or anything. I have to do a force quit. How do I just print a 4x6 borderless print using Imagebrowser on my Mac??????? Any help is greatly appreciated and thanks in advance!!!

    Gary Schnetter wrote:
    I am not sure where to look for these drivers.
    Both the Canon v4.8.3 and Gutenprint v5.1.3 are included with Leopard
    I went to the Canon web site and downloaded the latest driver v4.8.3 and it put it where it needs to go but doesn't tell you where that is.
    It would try to copy them to /Library/Printers/Canon/BJPrinter, but since the same files for this version would already there be, it might not do this unless the file being added are newer. It should also copy the package installer for the 4.8.3 to /Library/Receipts.
    Anyway, when I went back into Imagebrowser I now have a much shorter list of options, plus do have the 4x6 borderless now. I click on Page Setup in Imagebrowser and select this, but when I go out of there and click on "Print" absolutely nothing happens. I still can't print from Imagebrowser. I use Quarkexpress and can print on plain paper fine so I know the printer works, but cannot print from within Imagebrowser for glossy prints. Any ideas what I may need to do?
    Not really. I used v6.1 in my testing. Maybe your v6.0.x has a problem with 10.5. Also, if you upgraded from Tiger to Leopard and didn't do a clean install of ImageBrowser, then maybe this is causing the failed printing.
    You mentioned you can print on plain paper from Quark. Can you print on plain paper from ImageBrowser?
    My last suggestion would be to view the cups error log. With the i850 printer queue open, select Printer then Logs & History. This may give some clues as to why ImageBrowser is not working for you...
    PaHu

  • Not able to print label getting standard text as it appears in so10

    Hi,
    I have a  so10 object ,script contains only one window i.e main and we call so10 object  in script  by using statement    'Include &standrdtxt& object text id ST lang EN' ( standrdrxt contains text name)but instead of printing label it is printing the exact thing maintained in so10 object. the so10 object contains lines as mention below
    <STX><ESC>K<ETX>
    <STX><60>SI<62>L1000<ETX> , etc.....
    As it is apperaing in the print preview,what is the <STX>....<ETX> and where it is maintained .What should i do so that  label get print .

    Hi,
    The below is the full information what exactly is happening .
    the user  had a Win 2000 computer that the Intermec 3600 is attached through nullmodem serial cable as a local printer.  The user would log on to SAP on that computer and selected the ZNW_DTILABEL transaction (driver program). Within the transaction, the user would specify LOCL to send communication to printer.  The Win 2000 machine is being replaced due to  discontinued support issues later this year.The new machine has Win XP and does not currently communicate with printer.
    user is telling that
    There must be something in this transaction programming that assumes language from Win 2000 that a recent 1/12/2010 Hotfix KB97220 had to be removed off the Win 2000 computer in order for the SAP transaction to communicate to the printer.
    I don't find anything in coding which is not allowing to print label, if i print from my PC i am getting text <STX>...<ETX> as said in first post instead of label.what would be the problem with XP or wht needs to be maintained in XP.

  • Borderless printing problems - Aperture 2.1/Canon Pro9000 II

    Problem: photos don't print borderless. I have selected the appropriate paper from the "paper size" dialog (in my case, "4x6 borderless"). Things used to behave nicely but something has changed after Snow Leopard. The "calibrate" settings do not solve the problem. The border appears only on two edges of the print and the calibrate settings can't move it back. Other software (Preview, Photoshop, etc.) print borderless without issue. Anyone else out there having a similar issue?
    Aperture 2.1.4
    OS 10.6.1
    Canon Pro9000 II, CUPS driver 10.26.0.0
    Thanks in advance for any ideas!

    I also have struggled with the borderless printing problem. Tried calibration has some unpredictable results. Tried preview, pretty much the same problem. Spent much time, ink and paper to come up with a solution I can live with. I accidentally printed a borderless 4x6 that actually had a 1/8 inch white border all the way around, not the borderless print i had intended but one that i can live with until there is a SL fix or a Aperture fix... I am just waiting. This is just one of many print problems since installing SL.
    Canon IP5200r printer... I have installed the latest drivers

  • Printing borderless prints from 2540 all i one

    is it possible with a 2540 printer to print colour borderless prints? I have HP original 6x4ins Premium plus paper borderless  and can print ok. But I get a 15mm gap at the end of a landscape print and at the lower edge of a portrait print.
    I have, as far as I can see, set all settings ok.
    Any suggestions/answers that will explain how, if it is possible, I can lose the 15mm from my prints will be very helpful.
    Regards
    PCTwit

    Hi,
    I afraid the Deskjet 2540 does not support Borderless Printing as listed within its specifications below:
    http://store.hp.com/webapp/wcs/stores/servlet/PDPStdView?catalogId=10051&urlLangId=-1&langId=-1&prod...
    The minimum bottom margins for the product are 15mm as you may find the Print Margins listed within the Paper-handling specifications below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03811750&tmp_track_link=ot_faqs/top_issues/en_u...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for