Pages not loading completely

I am seeing intermittent issues with web pages not loading completely, or taking a long time to load. Some times embedded images will not load. The page will often load, but the page loading icon in chrome will carry on spinning. 
This is happening periodically and at various times of the day, but has been going on for a couple of weeks. The rest of the time, my broadband speeds are fine and very snappy, as normal. 
I've restarted my router (homehub 3) several times.
This doesn't seem to be a general speed problem.
Using speedtest.net, i can see that my download speed is pretty consistent at just under 20mbps. 
Using pingtest.net i see no packet loss, with good ping times.  
Using the BT speedtest tool, my line speed to the house is around 23mbps, and my download speed is again around 20mbps.
This is effecting all devices attached to the router, both wired and wifi... both windows PC/laptops and ipad/iphone devices. 
I am not sure where to look next, and am kind of dreading a conversation with BT helpdesk. 
Any ideas? 

Thanks... That's a long thread, and I am not going to pretend to understand all of it. 
It seems to be similar issue, but I am seeing this any webiste, including this one, not just on a handful of specific sites. 
If I understand the thread above correctly, that issue is with BT, and was apparantly fixed, although the most recent post suggests it has not been. And that if this is the same problem, I can't do anything to fix this myself, other than raise this BT?
Having played around a little more, I think I can see that this problem becomes more accute when i am jumping rapidly from one webpage to another in quick succession, until i get to the point where pages are just not loading anymore. 

Similar Messages

  • Pages not loading completely or at all.

    This is a problem I've been having for weeks and weeks. Pages in Safari (or in IE or in Firefox) will not load completely or at all. For example, the apple.com homepage does not load at all and neither does ebay. However, the amazon homepage will load almost completely, but a few of the images don't appear.
    I've tried numerous ideas.
    I've run through the power cycle. (Turning my router and cable modem off, and then restarting them.)
    I've run network diagnotics.
    I've reset Safari.
    I've typed in IP addresses manually.
    We bought a new router.
    It even got down to me having to reinstall the operating system. (The computer is fairly new, so there wasn't any important information on it.)
    I tried calling my ISP, but they don't know what's wrong.
    Apple won't speak to me because my 90 days is up, and my parents won't pay $160 for the care plan.
    I'm becoming desperate at this point. I love my new iMac, but there isn't much I can do without the web.
    Oh, I also can't download updates, access the iTunes music store, or anything else that requires internet acces.
    We have three windows computers in the house that are all running fine on the WLAN.
    Any help would be GREATLY appreciated.

    Any other ideas?
    Hmm, can you try logging into another user account to see if the problem is present there as well? This will confirm where the root issue is - your user area or system wide. It sounds like it wil be system wide but best to double check.
    If you don't have another account you can use System Preferences -> Accounts -> [+] to create a test one (and [-] to remove it if needed).
    I've typed in IP addresses manually.
    Can you expand on what you mean by that? Are you referring to the DNS addresses or typing the IP address in the browsers address entry box?

  • Pages not loading completely with JavaScript enabled

    This just started in the last day or so. I have Safari extensions disabled.
    When I go to the ThinkProgress.org site/blog, I'm getting an incomplete page unless I disable JavaScript. With JavaScript, I'll get the first post on the blog, but nothing else. With JavaScript off I get the site looking pretty much normal.
    I get a similar problem if I go to Economist.com and click to read one of the stories. In that case, I get the story's headline, but it cuts off before the text of the article, right after a link to Tweet the story. Again, disabling JavaScript allows the page to load correctly.
    I suspect some third-party service is providing a script, which broke in the last day or so, but nobody's paying attention because of the Holidays.
    The problem doesn't appear to effect Chrome. Safari was upgraded to 5.0.3 in November, but this problem is more recent than that.
    Has anyone else seen this?

    Hi Jonathan,
    Go to the Economist.com site.
    From your Safari menu bar click Safari / Preferences then select the Advanced tab. Select the box next to: Show Develop menu in menu bar.
    Now click Develop / Disable Runaway JavaScript Timer.
    See if that makes a difference.
    Otherwise, check Safari / Preferences - Extensions or try disabling Safari plugins, Safari / Preferences - Security.
    And delete the cookies associated with those url's in Safari / Preferences - Security. Show Cookies
    Carolyn

  • Web pages not loading completely or crash

    6/10 time I go to open a page (usually a new tab with up 2 30tabs open) but problem still occurs with.1 tab load a page the progress bar gets.to about 98% and freezes with a blank screen. Or page starts to load but as soon as you go to scroll down rest of pages is blurry. This is on latest firefox for android beta on android 4.4.2 sony.xperia z1 6903 latest firmware 14.3.A.0.757

    Hi mrx7,
    Your older crash reports were caused by the Javascript JIT compiler (javascript.options.baseline.jit.*) so disabling those prefs MIGHT have solved the issues in 28. However, your new crash report is showing something related to graphics. I'm not quite sure what though.

  • WRT54G v5 admin screen does not load completely

    I have a WRT54G v5 and when I go to the admin screen (http) it does not load completly.  It was working the other day.  I was in the process of downloading a newer version of the firmware, I am using 1.0.6 and was looking at the 1.0.9.  I have it on the computer but have not applied it to the router yet.
    I am using IE7 and was able to view the page previously with IE7 but am not able to now.  I have rebooted the router (cold start).  No difference.  I can still get to the internet and the wireless is working also, I just cannot make any changes to the router.
    I need help, if someone is willing.
    Thanks
    Dave

    Check if your firewall is on. I was having the same problem and I just shut down Zone Alarm...

  • Windows 7 and updated firefox window do not load completely . the banner may load or it times out. If I leave it sit for a while it may finish loading. New computer.. cannot figure it out.

    I have a new computer with windows 7. I downloaded the mozilla and the update.. now my pages do NOT load completely. the page banner but not the content. or it takes a really long time. When it will not load it say the try again.. and i reload a number of times to get it to load... HELP ME!!
    I will include an example below... in the URL blank.
    This includes Yahoo and Google...
    occasionally it says ...
    The connection was reset
    The connection to the server was reset while the page was loading.
    The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • Comcast will not load completely

    I need more help about making comcast work. I have read almost all the questions and responses to the comcast website will not load completely. It will go as far as log-in/password site but will not load the message page.
    Interestingly, I have a mac at home at work. I have the problem at work but my Mac at home is working perfectly.
    I have tried to use every suggestion possible and no resolution.

    Hi,
    Are you using DNS #S in the TCP/IP tab DNS Servers field, in Network?
    below #'s from the portforward page- http://www.portforward.com/networking/dns.htm
    Comcast (pick the nearest!)
    68.87.66.196 Comcast (national) Primary DNS Server.
    68.87.64.196 Comcast Secondary DNS Server.
    68.57.32.5 (Virginia)
    68.57.32.6 (Virginia)
    216.148.227.68 (Denver, Colorado)
    204.127.202.4 (Denver, Colorado)
    68.42.244.5 (Taylor, Michigan)
    68.42.244.6 (Taylor, Michigan)
    68.62.160.5 (Huntsville, Alabama)
    68.62.160.6 (Huntsville, Alabama)
    68.87.96.3 (Pennsylvania)
    68.87.96.4 (Pennsylvania)
    Have you tried deleting all comcast cookies?
    Under Safari menu, Safari Preferences->Security tab...?
    Alternately....
    Home~/Library/Cookies folder/cookies.plistmove the cookies.plist to the trash
    Click on the Finder's Icon in the Dock.
    In The Finders window, sidebar, click on the Home icon
    (if Finder prefs. are not set to open home)
    Home~/Library/Caches folder/Safari cachemove the safari cache folder to the trash.
    Do a restart of your mac.
    Does that help any?
    Eme'~[)

  • High-traffic websites do not load completely

    Websites such as facebook, wikipedia and others do not load completely. They load most of the website and hang, leaving a perpetually-rotating green "loading" icon at the top of the tab. It will usually leave out a couple images after having loaded the text. I've adjusted the firefox settings so that it doesn't block pictures coming from outside sources, but it hasn't fully remedied the situation. The other issue is that it doesn't happen every time. I'll be browsing on facebook or wikipedia and every third link I click (thereabouts) the website hangs without fully loading. I've already adjusted firefox so that it no longer automatically uses any proxies, but while that seemed to reduce the frequency with which this problem presented itself, it still happens 1/3 of the time rather than 3/4 of the time.
    A parallel problem (while I'm unsure as to whether or not it is related) is that youtube will load the whole page but the video. This also does not happen every time, but it will register as having completed loading the page (there is no green circle icon at the top of the tab), but no video will appear and no light grey buffer bar will load at the bottom of the video screen. I don't have any flash blockers or anything of the sort.
    I've scanned my computer repeatedly for malware using malwarebytes and avast with very little in the way of results (usually nothing or one or two files of malware, no trojans or viruses).
    Any help will be greatly appreciated.

    Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that helps in case some security software is causing problems.

  • I have some web pages that loaded completely when using 3G but partially loaded using Wifi.

    I have some web pages that loaded completely when using 3G but partially loaded (only text without any images ) using Wifi. Is it a site specific issue?

    Can you rule out the NoScript extension as a cause of the issues on those sites? Even if you allow the main site to run scripts, often a website will spread its content over additional servers, so you may need to visit the "S" button menu a second or third time to get full functionality. (Over time, you'll recognize some the servers as being for ads, tracking, or sharing buttons and you can just let those parts of the page not work.)

  • Webpage do not load completely

    Many web pages do not load completely like facebook, rds.ca etc...
    What can I do to correct this?
    Thanks

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find nothing has changed after you complete it.
    Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select “Help” from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    As Guest, launch Safari and test. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created as Guest will be deleted automatically when you log out.

  • If I choose any i-works draft, I only can get one page not the complete draft

    If I choose any i-works draft, I only can get one page not the complete draft

    Mousing shows all the available pre-formatted page available in each template to give you an idea what is there, but you only get one, sometimes 2, when you create a new document. All of the other pages can be accessed via the Insert menu. Insert > Sections in word processing & Insert > Pages in page layout.
    If they all loaded when you opened a template, you'd have to go through & delete the ones you don't want & duplicate the ones you want more than one of.
    FYI: the name of the program is iWork, no 's' & no hyphen

  • Keep getting message pop up "Error reading/writing file  "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

    Logic froze while I was working on something so I forced quit.  Now every time I open LOGIC a message pops up that says:
    "Error reading/writing file
    “com.apple.logic.pro.cs”:
    Logical end-of-file reached during read operation."
    The only button option is cancel so I press it and another message appears that says:
    "The Preferences are not loaded completely.
    Do not save them, as you would overwrite the Preferences file with incomplete data."
    Then when i close logic a box appears saying:
    "The Preferences are not loaded completely.
    Save them to "com.apple.logic.pro.cs" anyway?"
    There are 3 button options to press; ok, cancel or dont save.
    I press "don’t save" cuz I don't want to ruin anything.
    I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem.  If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done?  I have hundreds pieces of music files I've created.  I'm scared to mess anything up with all the hours and months of work I've done.  Is there anyway to fix this without loosing anything?  I'm using Logic Pro 8.
    Thank you

    You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
    Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

  • Mafia Wars can not load completely because you are missing a plugin, pop up is too small to see the missing pluging, how do I find out what it is?

    Yesterday, while playing Mafia Wars, I kept getting a bar notification that "The game can not load completely because you are missing a plugin? When I clicked on the box I got an 1/2" popup, which probably contains the information I need but it is too small to find out what it is. You can not maximize it. The is nothing visible to click on. Flash and Java are all up to date, as well as all other plugins. No plugins are disabled. How can I find what I am missing?

    Try a program such as Disk Inventory X or OmniDiskSweeper.
    (50778)

  • Web Pages not loading on Mobile Devices

    Browsing web pages not working on mobile devices
    I have bt inifinity 2, from my laptop and mac (with same wifi connection) webpages load no problem, from my android tablet and iphone (with same wifi connection) web pages not loading. On these devices I can load youtube videos, and apps have connections/load data, it seems to be limited just to browsing webpages.
    I have tried changing ssid for the 2 channels, I have tried disabling wifi on the router, and using apple time capsule as the router, everything seems to result in the same problem, you cannot browse web pages on mobile devices.
    previously i had adsl from bt and didnt have these issues.
    Solved!
    Go to Solution.

    Try turning Smart Setup off.
    http://bt.custhelp.com/app/answers/detail/a_id/44328/~/switching-smart-setup-on-and-off-on-the-bt-ho...
    Devices where there are known to be problems include:
    Some Apple devices including iPhone 5 and Apple TV
    some Android smartphones
    Xbox<
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • App Store is not Loading Complete Help

    already have three days to look into'm not getting the picture below
    and also some web pages not loading completely

    It looks as if you just have a slow Internet connection - which is why the pages aren't loading. Have you done an Internet speed test lately?
    Clinton

Maybe you are looking for

  • I downloaded the 64-bit version of iTunes by mistake.  How do I replace it with the proper version?

    The question is pretty much self-explanatory.  iTunes still works for me but I get an error message every time I log on my PC times five!  The only choice that I seem to get now for upgrades is the 64-bit version.  Please advise. Thanks!

  • Grouping Anchored Objects

    I have an anchored graphic image (using Object, Anchored Object, Insert) and need to add a text box under the graphic and a rectangle frame with a stroke on top of the image to highlight a portion of the image. What I would love to do is anchor the g

  • Unable to create a billing

    Hi there: I am unable to create a billing based on a sales order as it is a order-related billing,it shows "no billing documents were generated see log", but when I am going to edit --->log, there is no log, and I had searched threads in this forum a

  • Creating photo slideshow in imovie without any effects

    Hi, When I am trying to make a photo slide-show video in imovie, every photo comes with zoom-in and out effect. I dont like that one. I just want to show photos one after another without any effect. But I couldnt find any option in imovie. Is it poss

  • Why does my  ipad2 disconnect from my wifi?

    When I go into the room where the router is I can connect. But when I walk into another room it disconnects. My brother's ipad2 can connect anywhere on the house? I just receive my iPad Monday. Should I send back to apple?