Pages on iPad not sending to the cloud
Updated the pages app on my mac and ipad. Documents on the mac pages; send to the cloud; but even after backing up my iPad; the documents in iPad Pages; still do not send to the cloud. Strange. Any ideas appreciated.
Thanks
Have you enabled Pages on the iPad to use iCloud? In settings on your iPad scroll down to Apps & keep scrolling until you find Pages. Tap on Pages & make sure use iCloud is on.
Similar Messages
-
I have OS X on both my iPad and my new iMac. I purchased Pages for my iPad and my husband's iPad at least a year ago. All of my stuff on the iPad is stored in the Cloud. Do I have to purchase it again on the iMac? How do I get it to run on the iMac?
attymot wrote:
Do I have to purchase it again on the iMac? How do I get it to run on the iMac?
You should also be able to access your docs (even without the Pages app on your iMac) by logging into iCloud.com and using the Pages for iCloud beta app via your browser.
(By the way your iPad uses iOS and not OS X) -
My iPad receives email on the hotel wifi but will not send. The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged. Restarting iPad did not help.
I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message. I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message. Is there some trick to this? Very frustrating!
-
The last 2 songs I purchased, Treasure and Take Back the Night, are not downloading from the cloud on my iPhone 4 or my iPad2. I have tried previous suggestions on the support page. Can anyone suggest further solutions?
Hello BwarsIG88
Check your purchase history by going to the iTunes Store and then click on purchases. From there you can see all your purchase history and download what you are missing.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Regards,
-Norm G. -
Since upgrading to IOS 7 the photographs I take on my iPhone 4S do not transfer to the cloud. Sometimes one or two of them transfer but then none for weeks. I have deleted photos from the cloud in case it is full but to no affect. I use my iPhone in conjunction with an iPad so this is driving me mad. Anyone else have this problem?
No you're not the only one having this problem in fact many people are having it I spoke to Apple support today about it. First it is my opinion the aspect ratio is different on iPhone 4s compared to iPhone 5s, however I really feel it is a software issue. Just to make sure I am having the same problem you are I will describe my issue. I Have confirmed the following: if I Center an object on my iPhone 4s screen and open the picture while I am still in the app (open on the bottom left it)looks fine. But when I open camera roll and open that particular picture it's also fine
Until I scroll left or right it pulls the image to the left side appearing to cut off the left side of the image. After talking to Apple support today and my knowledge with Apple products I strongly suspect this is a software issue. Apple asked me to do a restore as a new phone but I'm not going to go through all that nonsense when I believe it's a software issue and not a hardware issue. So again to recap to answer your question you're not alone, theses sort of things are expected when they rollout a new iOS just hang in there and let's see if they put a patch out for next update. -
It says my apple id is valid- my ipad not qualified for i cloud
when i sign into i cloud it give this msg :my apple id is valid- my ipad not qualified for i cloud
what do i do now ?When you say "deleting app", which app are you talking about? And what, exactly, is the error message you are getting and from which app?
-
My iCal is not connecting with the cloud
My iCal is not connecting with the cloud and gives me the error message "iCal couldn’t connect to cal.me.com". I am still using Mac OS X 10.6.8. My ipad and iphone calendars wont sync to mac either. Do I need to update my software on the Mac to fix this?
Joining an encrypted WEP or WPA Wi-Fi network
-
TS1398 My iPad cannot send mail - the connection to the outgoing server failed
My iPad cannot send mail - the connection to the outgoing server failed.
Go to the email settings, and re-enter your Outgoing Server username and password.
Have you changed that recently, perhaps on the Incoming Server but not on the Outgoing server? -
Why all of a sudden will my iPad not send emails to one specific address at work but still work to everyone else at work?
Contact the person by telecon. Their email address may have changed.
Cheers, Tom -
what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network
My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router. -
I changed laptops and went from Vista to Windows 8. It requires icloud. I did icloud setup but it will not allow me access and wants to give me a new password. That is OK but it will not send me the promised password even though itunes recognizes my password
This has been posted for almost 2 weeks and not one reply. Thanks a bunch! As a newbie to OOo and Mozilla, I am not impressed with responsiveness to support needs with either. So, the future of my new experiment with going non-Microsoft remains an open question.
Oddly enough, the problem mysteriously went away. I have followed the same routine and changed no settings. Suddenly all of the downloaded spreadsheets were no longer read-only. So I consider the matter resolved. -
"An eligible Pages application was not found in the location /Applications." every time i try to update. what do i do?
lukasfromnull wrote:
You will need to buy the newest iWork so it works again. I had the same problem.
No, there is no need to re-purchase iWork. If it was installed from a retail boxed DVD, it needs to be reinstalled from the DVD. If a license was purchased electronically for the iWork '09 trial, reinstalling from the downloaded dmg will need to be done. If any of the apps were purchased from the Mac App Store, they can be reinstalled from the Mac App Store. -
I have seen that some of my Itunes music has not gone to the cloud, and I can't seem to refreash this? What should I do?
First try:
iTunes: Finding lost media and downloads
Next
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
For other music y will have to get them like you did before -
Pages app unexpectedly quit whilst I was in the middle of a document. I can now not open it AT ALL. I find it's not just that particular document that won't open, but any of my Pages docs will not open using the current version of Pages. The reports of the app unexpectedly closing each time, automatically went to Apple, but I am not sure what happens with them then. Does anyone know how to help me with this? We live in a very isolated region so rely on internet help. Thanks
I also managed to read a few other discussions about Pages and files not being able to open. I actually went to the last back-up and restored the computer from that and everything seemed to work ok again, which is great!...advice from another discussion I think you may have been involved in PeterB. Thanks for the advice...also this advice, as I will make a note of trying to open using the Shift key if it happens again and see what happens...might be an easier first option than restoring from a back-up. Thans heaps for the help!
I was interested to read some of the other discussions where it was stated that Pages '09 seems to be a better option to use. I have both installed, so I will lkeep this in mind. Thanks heaps! -
Hi. I just got the iPhone 6, plugged into itunes and made the mistake of putting an OLD back up on my new phone resulting in losing all contacts after 2013. They are not saved on the cloud. Is there any way to go back to before I screwed up?
If you have performed a sync with the device since you restored this old backup, then don't bother looking for another backup. iTunes writes over the last backup each time you sync. If you were handling contacts in iCloud, you would find them by logging into iCloud. Or you can check settings and iCloud and see if the button it on for Contacts. Otherwise it might have been on the computer, if you had a program that syncs with iTunes and handles contacts, depending on the computer system you use. If Windows, it would be Windows Contacts or Outlook. If a Mac, there is a Mac Address book as well.
Maybe you are looking for
-
SAP BW ERROR OCCURS WHILE CREATING ODS OBJECT
HI TO SAP BW GURUS AFTER CREATING ODS OBJECT,AND ODS OBJECT STRUCTURE,WHILE ACTIVATING THE STRUCTURE I AM GETTING MESSAGE AS <b>message : STDO:LOG COULDNOT BE WRITTEN ON OUTPUT DEVICE T</b> COULD ANYONE PLS TELL ME HOW TO RECTIFY THT VENKAT
-
I can no longer edit the info for my songs, movies and tv shows. This occurred since I loaded Windows 7 Pro on my C drive, and then fownloaded ITunes 10. Why will the program not allow me to access the track info to edit it?
-
Screen getting disabled on pressing enter only
Hi All, I have a module pool program, in which i am editing some fields on screen. Without any change change done if i press enter the screen gets disabled. As per logic it should happen on pressing save button only. Any suugestions. Thanks & Regards
-
Condition for interface determination
Dear all, I would like to choose a target inbound interface depending on values in a field. The problem is, that the source field has occurency 0...unbounded so that I check the same field twice. Example: /TestMessage/Field1 = "A" AND /TestMessage/Fi
-
FiX lot size & minimum sale order qty .
hi all We maintained minimum order quantity for material ; can we put massage sale oraganization wise ie for SO IN01 Massage type is 'E" & for IN02 massage type is 'W" If my minimum order qty. is 10 then SAP will accept the sale order qty. with mult