Pages --- picture prints with a line through it

I copied pictures into a Pages document and everything looks good on the screen. When I print it, a line shows up where an "alignment guide" would be showing guides at object center.
It is very light but also very noticeable on the paper. When on the screen it only show up when I move the picture around. When moving on the screen it was blue and I changed the alignment guide color to red to confirm that it is the alignment guide.
I've checked the show guides at center, guides at edges, and had neither guides checked. When moving pictures on the screen these have the expected impact. BUT the light line shows up on the printed page at the center location for all three options.

A bit more information:
- The line is sort of colorless. Only on screen when moving about was it blue or red after I changed it.
- The doc has 3 pictures. The one with the line through it (under my wife's nose) doesn't seem to go on to the picture next to it. Almost as though a power greater than I was tweaking my wife.
- My last attempt is to have alignment turned off and the third picture is the last to moved. It includes some buildings and signs with horizontal lines. When printed no lines are visible on this third picture. Unfortunately, I now get a couple vague lines, lighter than prints that go this thing going, still in the first picture with the wife and grand kid. Seems like this also takes the printer out of the equation because the lines move.
This is to be copied as a Christmas letter which will probably make the lines even harder to see, so I'm hoping that it will pass the wife's muster. I'm going to give up for now though will check back to see if any other ideas show up.
Thanks much for your attention and help!

Similar Messages

  • All of my I work programs in iwork won't open and say they are damaged.  Any ideas.  The programs have a white circle with a line through it similar to the ghost busters logo.  Any thoughts?

    All of my iworks programs, pages, keynote, and numbers have a white circle with a line through it, kinda like the Ghost Busters logo.  None of the programs will open and the error messages reads that they are damaged.  How do I repair?

    What you describe is what we get for apps dedicated to PowerPc only when installed on a macintel machine.
    I'm surprised by this behavior for iWork apps which are designed as universal ones.
    How were they installed ?
    Did you used the installer or did you borrowed them from an other machine ?
    If it's case 2, maybe the device used to move the files was not a HFS+ one.
    The only correct way to install iWork is to apply the installer and the late iWork updater.
    Yvan KOENIG (VALLAURIS, France) lundi 25 avril 2011 11:48:24

  • When I try to turn on my 27'' iMac I get a circle that appears with a line through it does this mean my Drive is shot?

    when I try to turn on my 27'' iMac I get a circle that appears with a line through it does this mean my Drive is shot?

    Not necessarily. We use a product called Scannerz to test hard drives. They have a book on hard drive troubleshooting that you can download here:
    http://scsc-online.com/Downloads.html
    Scroll to the bottom of the web page and download the Hard Drive Troubleshooting book. You won't want to read the whole thing, just the section describing your problem. Most of the stuff they describe in their "advanced" section requires unit disassembly, and the way that section is written I think they're assuming people know how to take units apart without any instructions - in other words it's not written "for the rest  of us." Most of the resets they describe that you might need can be done by anyone.
    If you end up buying Scannerz, I would NOT recommend Scannerz-Lite, I'd go with Scannerz with FSE-Lite. It costs about $14.00 more but they keep enhancing the product and adding more applications to it, all free if you own Scannerz w/FSE or FSE-Lite. I'd also avoid FSE all together unless you know a fair amount about the operating system, files, processes, Unix type path names, etc. etc.
    If you're lucky that will end up being nothing more than a reset.

  • I updated my computer to the new software and now the iPhoto has a circle with a line through it.  When I try to update, it pops up to say "These apps cannot be accepted by your apple id". Then will say "update unavailable with this apple id" how do i fix

    I updated my computer to the new software and now the iPhoto has a circle with a line through it.  When I first try to open it the pop us says: "You can't use this version of the application "iPhoto" with this version of OS X. Version: 9.2.1"  When I try to update, it pops up to say "These apps cannot be accepted by your apple id - These apps were already assigned to another Apple ID and they will be available in that Apple ID's purchases list.  If you don't have access to that Apple ID and want to receive future updates, you will need to purchase the application".  I checked and there is nothing under the "purchases" in my App store.  Then will say "update unavailable with this apple id - This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canceled." Then the third pop up says "We could not complete your request. There was an error in the App Store.  Please try again".  Just want to know how do to fix.

    After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
    b0n0b0
    Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
    Mar 15, 2014 9:05 AM (in response to Terence Devlin)
    Got it! Thanx.  What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

  • Why can i watch videos from safari online while in 3g area but when at home connected to wi-fi the video screen comes up with a play button with a line through it and doesnt let you watch video

    i can not watch videos while at home and connected to wi-fi. when i touch the video i want to watch a screen comes up with a play symbol with a line through it. i can disconnect from the wi-fi and go to 3g and the video will play. this is happening when i go to safari and try to watch a online video.

    here's the info you needed:
    windows xp professional
    mozilla 3.0.19
    explorer 8.0.6001.18702
    still having the same problem unfortunately.  i appreciate your help thus far and hope you have more info.  thanks a lot.

  • I transferred all my itunes music from my old pc to a new laptop using an external hard drive.  I can drag songs to out ipods, but when i try to add songs to my Iphone 4, I get the red circle with a line through it.  It will not allow me to transfer music

    I have transferred all of my itunes music for my old pc to a new laptop via an external hard drive.  All songs are sucessfullt loaded in itunes and I can drag songs to my husband's ipod without any problems.  However, when I try to drag songs to my iphone 4, it will not let me.  I get a red circle with a line through it. Why would it work from itunes to ipod but not to my iphone?  HELP!!!

    You might want to check your process for moving your iTunes music against this: http://support.apple.com/kb/HT4527.

  • I am unable to drag any playlists to my ipod- the circle with red line through it shows up- what is up ?

    I am unable to drag any playlists to my ipod- the circle with red line through it shows up and precludes it from being accepted- what is up ?

    Though I have doubts for success, you might try a SMC reset.  It can do no harm.  Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
    http://support.apple.com/kb/HT3964
    Ciao.

  • Blinking folder with question mark and a new hard drive: also installing Mountain Lion and 0 with a line through it appears please help?

    Okay so my harddrive failed in my 13" Macbook I used to have a WD scorpio black 250 gb for a while. I upgraded to a WD scorpio black 500 gb 7500 rpm hard drive. Okay so I installed the harddrive and ran my friends startup disc to learn that grey face discs are specific to that computer. The start up disc ran fine (minus the error stating it could not install OSX because its specific to another computer) and I looked in disc utility after installing the new harddrive and it said verified. I lost my startup disc and did not have another one. Using a friends mac I created a bootable USB drive with mountain lion on it, I plug it in and it comes up and when I choose to start up on the harddrive a 0 with a line going throguh it appears. If I do not start up with the USB or my friends startup disc then a blinking folder with a question mark appears. So my question is what could the problem be if a startup disc runs on a new WD harddrive and says under disc utility that its verified but the 0 with a line through it appears after I try to boot it with a flash drive containing mountain lion? WHats the issue here im completely lost now

    Sounds like some sort of power issue and now your drive is not working.
    You'll have to take this to Apple for repair.
    You should read this if you don't have recent backups of your data off the machine.
    My computer is not working, is my personal data lost?

  • When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute.  The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?

    When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute.  The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?

    Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
    This happens the same whenever I try to install.
    To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
    My plugin is still showing as out of date.
    Is there anything you could suggest. Thanks for your time.

  • When i turn my macbook pro , on it comes up with a circle with a line through it

    i tried to wipe my computer to sell it , and after i followed the steps online it restarted and it came up with a grey screen with a circle with a line through it , it seems i have completely wiped the software off my computer as well .... HELP ME PLEASE URGENTLY

    Follow the steps here Mac OS X: Gray screen appears during startup - Apple Support

  • Can't move files - white circle with white line through it?

    OsX 10:4:10
    Suddenly I cannot move files from one drive to another, or from drive to desktop. Recently updated everything.
    White circle with white line through it appears.
    Network awaiting news footage. I'm stuck. What might this be?
    Any help would be most appreciated,
    Ben

    Hi megagram & dreed2,
    Thanks for staying with me on this.
    USB drive and errant file both have 'read and write' clicked. There is no 'ownership' choice in the info pop-up.
    Nor is there 'Ignore ownership on this volume' choice for the USB drive.
    I'm using an administrator account. I created a 'root' account, but it didn't seem to have any effect - didn't fix the problem. (I don't like messing around with 'root' account stuff.)
    I'm not running as a 'client in a Mac OSX Server environment'. Just as an 'admin' with the one tower and a rotating bunch of external drives (projects).
    I did a work-around for now ... shipped the 'unmoveable' file out to an ftp site (it would allow me to do this), and I haven't heard if the downloaded file is causing any problems on the other end (yet).
    If I come across a solution I'll post. It may have something weird to do with that funky drive (now returned to its owner), and me creating this particular file that same day as the funky drive was giving me problems. (Though the file was not ON the drive.)
    And the (almost new) computer did go down for a day last week ... would not reboot ... took it to the shop, nothing wrong with it, brought it home, it's been working fine ever since. Go figure.
    Thank you kindly for all your suggestions...
    Ben

  • When I print, a last page is printed with a summary of document printed - file name, directory, ...

    When I print, a last page is printed with a summary of document printed - file name, directory, ... Just got Windows 8. Is this something I can stop? Waste of paper and ink!!

    Hi RebeccaQ,
    Generally speaking, a summary page, document summary or document properties page is often generated based on a setting in the software application being used as opposed to the printer driver or menu setting.  For example, in MS Word you can select to print this page with each printed document.  In this case, depending on your version of Word, you can enable/disable the feature often in "Word Options", "Display", "Printing Options", "Print Document Properties".
    Does this help?  If not, which printer model and software application is being used when the summary is printed? 
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I can't trasfer music from my library in itunes to my iphone 3GS. A black ring with a line through it comes up when i try to move music onto my iphone from itunes. How can I fix this so that I can load my phone with music?

    I can't trasfer music from my library in itunes to my iphone 3GS. A black ring with a line through it comes up when i try to move music onto my iphone from itunes. How can I fix this so that I can load my phone with music?

    How are you trying to transfer it and what are your setting on iTunes.  I'm not on a computer that has iTunes at the moment so I'm going from memory and similar issue.  If iTunes is set to sync music then I don't think you can select and drag, if set to manual manage music then you can.  Also make sure you are dragging to music on the iPhone.
    Hope this helps

  • TS3423 Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not s

    Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not start?

    sonjadg,
    you can purchase a replacement pair of grey installation DVDs for your MacBook Pro from either Apple or iFixit. If Startup Manager is only showing an OS X Installer volume, then it sounds like the Mavericks installer had a problem midway through its installation process. To fix this, you’re going to need to erase your internal disk and reïnstall your original version of OS X from the grey Mac OS X Install DVD, use Software Update  to get it back to 10.6.8 (presuming that your MacBook Pro originally came with Snow Leopard), and then restore from Time Machine.

  • Mac book pro will not start apple logo spining wheel then gray screen then a circle  with a line through it

    need help with MacBook Pro 17inch willnot start apple logo, spining wheel, then gray screen, a circle with digional line through the circle

    Mac OS X- "Broken folder" icon, prohibitory sign, or kernel panic when computer starts
    Mac OS X- Gray screen or prohibitory sign appears during startup

Maybe you are looking for

  • Java.lang.NullPointerException- indicating portal runtime error

    Hi everybody, we have configured sso using Header Variable login module  with oracle OAM on sap portal (NW 7.01). which was sucessful. when we have done the same configuration on the NW 7.3 we are facing portal runtime error , when accesing the link

  • Streams between oracle 8i n 9i

    Hi! everybody, Is streams posible between Oracle 8i n Oracle 9i,my requirement is if any changes hapening in my oracle 8i database then the change should be recorded in 9i as well. i am taking databse level,any shema any table is making any changes t

  • Need inputs on CONVERT function in oracle.

    My source DB is : US7ASCII My target DB is : AL32UTF8 Basically I am using oracle CONVERT funciton to convert the data. Unforutnately AL32UTF8 is not predefined in CONVERT function. So, is there are any other ways to convert the data ? Plz let me kno

  • BPS variables and API_SEMBPS_GETDATA

    Hi, everybody! I've faced with the following issue. I have two planning levels. I have three variables: ZVPYEAR "Year of planning" (based on 0CALYEAR), ZVPRESP "Responsible person" (based on ZRESP) and ZVPWBS "WBS-element" (based on 0WBS_element), as

  • ITunes not displaying some songs on Library

    Okay I've had this problem for quite sometime and it's been bugging me because I have no idea how to fix it. It seems that whenever I change the actual file name of the song (ie. songs that I've ripped from CD's that that say "Track 1" I just change