Pages Printing in PDF...

I am having trouble with the text boxes printing as generic gray when I take my pieces to the print shop. It changes the color of the printed piece.
How can I get the text and graphic boxes to not print when in pdf form?
Will converting the boxes to CMYK help?

The 7535 uses autocolor sensing and will do CMYK colors when specified from the Pages color picker, you may have sent sRGB instead. What resolution photos did you place in your Pages document? There are also four printer resolutions that can be set:
Toner Saver - 600x600 dpi with limits on maximum saturation
Standard - 600 x 600 dpi with 256 half-tone levels
Enhanced - Raster image processing at 600x600 dpi with 8 bits/pixel. Halftone creation with resolution enhancement and LED marking at 1200x2400 dpi with 256 halftone levels.
High Resolution - 1200x1200 dpi with 256 halftone levels
You are using the Oct. 13, 2013 OS X print drivers for the built-in controller and the 2013 drivers and patches for the EFI Fiery controller?
WorkCentre warmed up?
Thoughts?

Similar Messages

  • Looking for Javascript to replace 'selected' pages in a pdf?

    Hi
    I've searched the web looking for a solution to a time consuming issue without luck. I have multi-page, print ready pdfs - but have to make corrections to a number of 'random' pages in InDesign. I have to replace only the random corrected pages in the standing pdf.
    An ideal solution would be a script that could launch an interface allowing input of the corrected page numbers eg: 3,5,14,56,92,146, together with a facility to select the corrected file/or files to replace pages, page number for page number in the print ready pdf. Does anyone know of a solution or possible starting point?
    MTIA

    Hi,
    Have you tried transforming this using XSLT?
    Regards
    Ayyapparaj

  • Every time I try to print a file to Adobe PDF, I get the message "Firefox is not responding". When I try to cancel the print job, all of my Firefox tabs shut down. This just started today. Up until today, I could print a page to Adobe PDF with no problem.

    The print dialouge box comes up. I select print to PDF. Another box comes up and says it is preparing the document (This is the way it has always been). Then, nothing. It says Firefox is not responding. If I try to close out the print box, it not only closes the page I was on, but any other open tabs in Firefox. How can I fix this?

    I didn't see that I could edit the question before "I answered myself." I updated the question.

  • How do I scan multiple pages into one pdf document on a HP Envy 4501 Printer

    My HP Envy 4501 Printer won't let me scan multiple pages into one pdf document.
    I went to "Advanced Settings", clicked on "file" and made sure that the check box next to "Create a separate file for each scanner page" was unchecked.
    When I clicked the Save button it showed the page that I scanned and showed 1/1.  On the right side it had options for changing the brightness and Contrast, Rotate and Crop and "Back", "Save" and "Done" buttons, but nothing about scanning another page.
    Not to mention HP's Customer Support is useless!
    I'd appreciate any help I can get with this problem.
    Thanks,
    Mark

    Hi BH,
    I see your diagram.  I just scanned something.  The screen that I'm looking at right now shows the preview page and the scroll box to the left of that just like in your diagram.  The screen does not show the + button nor does it show the red x button under the scroll box as in your diagram.  I can't see the plus sign because it is not there.
    I tried re-installing the software and drivers as you suggested but that did not have any affect.
    Thank you for trying to help me with this problem but it hasn't worked, therefore I can't mark the reply "Accept as Solution".
    I've noticed that on HP's support forum web page there is only 1 solved request for assistance.  That doesn't give me much confidence in HP.
    Please reply back to this post to let me know if there is anything else that I can try or if you know someone else at HP that can help.
    If I don't here back from you, I'm returning this HP Envy 4501 Printer to get my money back to use it to buy a printer from one of HP's competitors.
    Thanks,
    Mark  

  • Print to pdf often doesn't work with multiple pages?

    When I try to print to pdf, it often doesn't work right.
    I can select, for example, multiple Excel worksheets to print. It looks fine with 4 pages in Preview, but when I select save as .pdf, it only prints 2 of the 4 pages, and it prints those in 2 separate documents rather than a single .pdf document with multiple pages.
    Is there a way to do this? Is this an Apple error or Microsoft error? Since it looks fine in Preview, my guess it is an Apple error?
    Mark

    It sounds like this is the problem with the way Apple handles multiple orientations in a pdf document. You can use Acrobat to print the files - it handles multiple orientations correctly. There was a previous thread on this:
    http://discussions.apple.com/message.jspa?messageID=1983431#1983431

  • HT4356 How do you conver a Page document to PDF when there is no printer available

    I purchased a $400 printer last year..now I cannot use it with my IPAD3 because it has to be an Air Print printer.
    I need to convert my Page document to PDF and the only way to do that is to go to Print a document...but, when
    I get there it tells me that I don't have a printer...Therefore, I cannot get to PDF conversion...
    I thought Apple have an incredible group of smart software engineers  ...what happened?
    Now, I have to go and buy another $400 printer to be able to convert a document to PDF?
    I bought this IPAD3 for my wife since she is not a computer expert but, so far I see that this is a  product more compicated than a personal computer.
    The hardware is great but,  so far my wife has a hard time to use the Apps I got for this IPAD...I'm a software programmer working for a major computer company and I also have a hard time trying to get these functions to work...

    Under "Share and Print", tap "Email Document", then choose PDF. Alternately, tap "Sent to iTunes", "Copy to iDisk", or "Copy to WebDAV" and then choose PDF...

  • I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

  • How do I print 2 pages from a pdf file and enlarge it

    how do i print 2 pages from a file and enlarge it  to email

    Hi stevebulldog,
    Do I understand correctly that you'd like to extract two pages from a PDF, and then send them via email?
    To extract pages from a PDF, you need to use Acrobat. If you don't have Acrobat, you can try it for free for 30 days. Please see http://www.adobe.com/products/acrobat.html.
    I'm not sure what you mean by "enlarge" it. When your recipient views the PDF, they can enlarge the view (zoom in on the PDF) by choosing options from the View menu in Acrobat or Reader.
    Best,
    Sara

  • My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?

    My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?

    If you are running Mac OS X 10.7.3 then you have Lion installed, not Snow Leopard. It's probably not important to this discussion, but something you should be aware of.
    What application are you printing the PDF files from? Have you tried opening the PDF file using the Preview application that can be found in the Applications folder? Does the issue still occur? Have you tried other PDF files from a different source?
    Another poster in the following discussion thread reported that this method resolved their black blank PDF issue when viewing (and presumably printing) PDF files from Safari.
    https://discussions.apple.com/thread/3890509?start=0&tstart=0
    This solved my question by mcbuffy  on Apr 20, 2012 11:29 AM 
    There's a solution if you want to see the PDF inside Safari's window :
    Go to the folder : Your Hard Drive / Library / Internet Plug-ins.
    If you see a file with PDF in its name drag it to the trash.
    Quit and restart Safari to test with a PDF.
    If it works you can empty the trash.

  • Silent print a PDF from a web page using Flex. We are targeting Windows and Mac with Arcobat reader installed

    We are planning to Silent print a PDF from a web page using Flex. We are targeting Windows and Mac with Arcobat reader installed. I have tried using the AIR appliaction and it worked, But our requirement is NO INSTALL to the user machine for the silent printing. It is just from web page and silent printing to the default printer to the desktop/Laptop. Can anyone share your thoughts and experience with us. It will be very helpful..
    For AIR : I tried the thread Re: AIR and PDF showing/silent printing

    Hey CodeMonkey & Ross,
    Did you either of you ever find a solution? I'm stuck too, it seems I can get remote printing on all these PDFs to work but it just prints a blank page since I've been using Javascript in the browser, not Adobe's (they are Engineering drawings that I do not have permission to edit so I can't just insert code into them but I need to make work instructions). I've been scouring the internet for hours now, it seems that this thread is the only relevant/useful one at this point. No one else was trying to achieve this for similar reasons to mine.
    Thanks guys,
    Lox

  • I am unable to print a pdf from a website through Adobe Reader on my mac. It keeps telling me that no pages have been selected

    I am unable to print a pdf from a website through Adobe Reader on my mac. It keeps telling me that no pages have been selected - I have uploaded the latest version of Adobe with no luck and have never had this issue before !

    Hi bengaunt ,
    Thank you for posting on the Adobe forums, you can try printing as an image.
    Open the file>Print>advanced>check the box "print as an image" OK
    Thanks,
    Vikrantt Singh

  • IE locks when printing to pdf from a web-based page or pdf

    Acrobat 7 standard. IE 6 on XPPro64. It is a 64 bit machine and so printer drivers had to be obtained for 64 bit. When I try to print to "Adobe pdf", the current page out of a 200 page catalog being viewed online, IE locks up and the print job in the queue is unresponsive. It does this no mayyer the site or file being printed from. Other than this, Acrobat seems to work on on the 64 bit machine. Same thing if the page isn't a pdf but an ordinary html page. Printing to pdf hangs no matter what. Is this a known bug for 64 bit? It's at work, and the IT dept loves to mess with things, lock things etc, but I can't think how it could be related to that.

    I think that the earliest version that has successfully run under X64 is AA8.1.2. I think that AA7 will not work on X64 as I recall the various reports of attempts by others to do that.

  • How can I print a pdf in the actual size with a page border?

    How can I print a pdf in the actual size with a page border? (2 pages per sheet preferred)
    I usually print pdfs of books at a copy shop and they turn out fine.
    The problem comes when I try to print the same books at home.
    I use Adobe Acrobat X with the same settings: "multiple pages per sheet" (2x1) and page border. But the pages are slightly shrunken when printed. I think this is because my printer can't print as closely to the margins. Still, two pages should be able to fit on one sheet in actual size. Are there any layout settings that I can play with to find a better fit, besides portrait and landscape?
    If I select page scaling "none," I'm able to print the pdf in actual size, one page per sheet. But there's no option to add a page border.

    I have a test with some questions (multiple choice, FIB, matching, etc). I have just one button to submit all the answers, and after submiting the student can see his score and review the test to know where he failed. He can't answer again. However, he can change the answer multiple times before submiting.
    "if i turn on success/failure captions the student will see them while answering" - before submitting
    "if i turn them off he wont know what's the right answer" - after submitting
    My results page is the default. I didn't use any variable. When i go to the results page after reviewing the test all the entry boxes are "wrong".

  • Can I print a 2 page spread to .PDF from a CS 3 document where the rest of the pages are NOT spreads

    Since I do not know how to really describe this, please have a look and tell me how (if it's possible) if I can print (to PDF) this catalog where the pages (4) and (5) can remain as a spread and the rest of the document would print single pages.  I can print this as a booklet, but it's sideways online.  Our goal is to have our customers able to view the PDF online and get its full impact.  We really can't do that viewing it sideways OR by having the pages 4 and 5 split up like they are.
    http://provsnusa.com/pdf/Product%20Guide_GenRec_WEB_CURRENT_VERSION.pdf
    The problem we're having is we would like to NOT break-up pages 4 and 5.  We want this to look good for the users.
    Is it possible to have 1 spread only display all the way across - in other words, is there a way to NOT split up just pages 4 and 5 in this document?  The only way I know is to print ALL the spreads. 
    I tried: Creating the PDF with all the spreads, it does not look as good, but at least the 2 page spread is not broken up (4 and 5).
    But now if I go to print the PDF with ALL spreads, then it does not print properly on letter sized paper.  Are there settings I can embed where this will print properly where the end user does not have to make adjustments - i.e. We want the end user to be able to just hit "print" and it's done.
    I tried: I also created this InDesign CS3 document as a PDF booklet.  While this is OK, it appears sideways online to the viewer which is not desirable in this case.  Is there a way where the end user can view this correctly as a booklet online without printing?
    I guess as an alternative, I can upload the booklet for printing, and another version for viewing.
    Maybe there's a special web based PDF viewer out there or something - I'm very ignorant here.
    Any suggestions would be very helpful
    Sorry for the long wind - hope I've made sense.
    Dan

    Why not reconstruct the pages in InDesign they way you want the double pages to appear. There may even be an imposition script available that will do the trick. You could then output to pdf all the pages you want the full spread on. Leave the original to create the pages you wanted left as is.
    You can ask in the ID forum about an imposition script. I know there was one with CS4, there may have been one with CS3.

  • Why can't I print a PDF file?  message says no pages selected to print

    When I try to print a PDF file I get two messages 'This document could not be printed.' Then 'There were no pages selected to print.'  How do I select a page to print?  or is there something else?

    What is your operating system?  Reader version?

Maybe you are looking for