Pages slow to load or do not load, then time out, sometimes stopping page from loading will reveal it or stopping and refreshing it, though not always.
pages will not always load or take forever, if i stop it from loading and refresh it it may load right away though not always. It is like the old days @ 33K, never used to happen, basically have all the same plugins have always had.
has been doing this for several months now, finally can't take it any more, all malware, virus, scans are clean, settings are the same for last ? years.
do get script problems from time to time but not very often.
loading say New egg, will take forever or will not completely load page, have backed up all bookmarks, etc: removed and reinstalled but no change.
any Ideas would be of great help. I have been using Firefox, since it's inception and don't want to switch browsers.
Thank You,
Mark
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Similar Messages
-
Stop and refresh buttons (one will disappear while the other is active). I have found numerous websites that just don't want to load on the first try, now I am unable to refresh it (usually in a new tab) because the button disappears. BTW 255 limit is BS.
You can try to press the ESC key to stop loading the page if you see the Stop button instead of the Reload button. You can also reload the page via F5 or Ctrl + F5 (cache bypass).
Firefox 4.0 has a combined Reload and Stop and Go button that appears at the right end of the location bar.
To restore the Firefox 3 appearance you can use these steps:
* Open the "View > Toolbars > Customize" window to move the Stop and Reload button out of the location bar.
* Move the Reload and Stop buttons to their previous position at the left side of the location bar.
* Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
* Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons. -
My Verizon iPhone 5 has very slow upload speeds that causes my apps to time out. Is anyone else experiencing this? It only happens on 4g.
Then Restore your iPhone Firmware with iTunes on computer. See if better. If not, talk to Verizon and see if they know of the problem and if there is a fix. If not, then make Genius reservation and take iPhone to Apple for resolution under Warranty.
-
Pages won't load - have to stop and refresh
Please help me with this; I constantly have to click the X to stop the page from loading, then the Refresh, just to get simple pages to open. I've been doing it for months, no matter what site I'm trying to load, I have to do it over and over. It can be scary when shopping/ordering online. Please help with a fix - thanks
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
You can also check for problems with your security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls -
IPOD TOUCH(4th gen) MUSIC DISPLAY has wiped out all my music. The music I have is all still on ITUNES but will NOT SYNC. When attempted a displayes message appeared- Cannot read contents of IPOD (my IPOD name), go to Summary tab to Restore to factory settings. When I click OK it takes me to a CLICK on RESTORE OPTION, which I did. Then it explains that I will lose all APPS, etc.. to restore. I clicked OK again and it shows my IPOD is Downloading Software Update. The only thing being it has done this for 3 days now. It starts by stating will take 20 hours, goes down to 12 or 10 and prompts OUT and when I redo the thing again it starts back up at 20 hours but continually times out. *Also, in case it matters ,the SYNC option on my IPOD in ITUNES is Highlighted as to where I cannot use that option. Everytime I start it back up I get the same message (Cannot read contents of IPOD, go to Summary Tab,etc..) Help.
http://support.apple.com/kb/HT1808
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.
Please do not post with large italic font. It is very annoyint. -
Slow music download, then times out
I am now on my third Nano in 3 weeks, due to faults on the others, and I'm having similar problems with this one, when I connect the nano it starts to auto update the songs from my playlist, but after about 10-15 tracks, the ipod and pc just freeze for about 5 mins, then the nano disconnects from the pc. If I try an update it takes a further 5 mins, but then freezes again and disconnects. I am using a usb 2.0, so download speed should and used to be ok, since updating to 1.1.1 everything seems to have gone wrong. Can anybody offer any support and answers to this problem?
Have restored nano, still no difference, this has solved the first problem, but download still slow and times out before finishing playlist, have not tried another cable or pc, as I do not have another cable or pc, but have tried different usb ports, all the same outcome. This pc and cable worked fine prior to the 1.1.1 update, the day I updated eveything went wrong, so I believe it's more likely to be the update, rather than the hardware!
-
Extracting the first page from all pdf's in a folder and save them to a new file
Hi,
As Bridge apparantly is unable to create a decent-looking PDF from a bunch of other PDF's, we're looking for alternative solutions. The problem is, that I haven't done much scripting in Acrobat.
Pseudocode:
Select Folder where PDF files are stored
Create list of PDF files
Get first page from each and add it to temporary new PDF
Save temporary new PDF in high quality
Would that be possible in Acrobat? And where would I start? I can't even find a Scripting Guide for Acrobat (like the ones for Illustrator and InDesign).. and there seems to be no sample scripts included either :-(
Thanks,
ThomasThis can be done using a combination of an Action and a script. The script in the Action will collect the paths of the files you want to process and the folder-level script will extract the first page from each file and generate a new PDF from it. You don't need a plugin for this task, so you don't really need the SDK.
The Acrobat JavaScript Reference can be found here: http://www.adobe.com/devnet/acrobat/javascript.html -
I have restarted in safe mode, no change. I can't afford to reset it, I've spent countless hours undoing the Australis theme damage + other per-site customization.
hello rlyslowff, one thing you could try is to remove all program rules for firefox from your firewall/security software and let it detect the program again...
please also [https://www.mozilla.org/en-US/plugincheck/ update your plugins] (some of them are out-dated & have security vulnerabilities that are actively exploited on the web).
in case this didn't solve the issue, go to the firefox ''menu ≡ > help ? > troubleshooting information'', copy the contents of that page and paste them here into a reply on the forum, as this might give us further clues what is going on... -
There seems to be a major problem with video playbacks both from web sites and YouTube. If I click on a video the loading circle shows it is loading but either the video starts for 2-3 seconds and stops, or it won't start at all. At the bottom of the screen there is a section that shows individual thumbnails for the video and that shows that the video has loaded, but it refuses to play. I just tried a youtube video on my iPhone and the same thing is happening. Some occasional videos seem to work okay but I have spent much time trying to watch clips.
Use SpeedTest to test the speed of your internet. If slow, contact your ISP to confirm if the problem is on their end.
You have 2 versions of QT. Version 7.x is inside your Utility folder. Try that one.
=================
The latest version of Adobe FlashPlayer can be obtained from here: http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157 and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe. -
There seems to be no real reason why this happens. I've even tried clearing history and cookies and it doesn't change anything.
Most oddly, on some websites where I have accounts, on some accounts the images load and other times they don't.Thanks I suspected it might be something along those lines, I've not read much about ImageObservers so I will do now :)
Although I just made a brief test and opted for option 2 and now I'm getting an out of memory :S
"Exception in thread "Image Fetcher 0" java.lang.OutOfMemoryError: Java heap space"
Edit: So I'm now using more memory with these images than the heap can take. By using the:
new ImageIcon(imageToAdd); //loads the imageAm I now doubling the memory required for one image as this ImageIcon is created as well as the Image?
Is there a way of increasing the amount of memory Java is allocated easily without having to put in command line parameters every time? This will be running from a Jar file, can I do something with that?
Edited by: iexus on Apr 5, 2010 10:53 AM
Edit numero 2:
Had a brief google around see it's not easy but will have a look at cutting my images down in size before allocating more memory to java :P
Edited by: iexus on Apr 5, 2010 11:03 AM -
Hello people from the forum,
I have made a beatifull website, and upload it with filezilla to a server, and also I upload it to a local map.
Everthing was going very well, but i don't get my website on the internet, because one page will not be uploaded (again) and that is my first page, the home page (and for as far I understand also my index.html)
I web telling all the time: can not publish this page because there is an unknown error.
The strange thing is, that I can see, even on the local map as on the online server, that my home page is still there!
the size of the index.html is 303 kb (and when I open it, it is empty, but maybe thats normal?)
And yes, I did a lot of stupide things, by accident I deleted a lot of files and documents on my computer :-((
I reinstall Iweb (3.04) but the error is still there.
So, do I have to reinstall OS lion totaly? But them I i'm afraid that I lost all my webpages (even they are on the server now)
(can I put all on a USB stick, and make later again a new homepage?)
I hope one of you recognize this problem and have a more simpeler solution than my story here above.
Sorry for my english, I hope you understand.Hello Wyodor,
thanks for your reply on my question.
You are wright the index file is 308 KB.
And offcourse that I delete my files and documents is not an Iweb problem, but because my English is not that good, that I thougt I try to tell the whole story, and hope people can read trough the lines.
Why I didn't use Iweb to upload to the server is because the server company recommanded to use file zilla. And I am a nobody with this kind of things, so I did exactly what they tell me to do.
No, i did not make a backup of Iweb and the domain file, but reading other messages on this forum showed me that I can maybe try to make empty the cashfile (?)
and otherwise I have bad luck and have to make my website again. Offcourse I have a lot of examples from all the pages (copied from the local map to my USB stick) and my website is aprox. 15 Mb, (not so big) so it will cost me a few nigths.
But I'm still hoping on a miracle :-)
greetings Lasource -
Bought new hp8600 plus printer. tried to print a page from word. will not print wireless.
Bought this HP8600Plus printer because it indicated wireless.
Installed disk and tried to print Word doc. It will not print.Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en...
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
In fullscreen mode (F11), when moving the mouse toward the top of the screen to display the tabs & stuff, the page displayed is shifted down. This makes it annoying when returning down with the mouse - you want to reach a certain link, for example, but your target gets shifted up once the tabs & stuff is hidden back.
Is there any way to make the tabs & stuff display 'above' the page content, like on another layer?Is it the web page display that is changing its own position, or is it something
about the toolbars that is pushing the page down? I have the same issue with
my browser using an add-on to show a multiple line bookmark bar. -
When Printing a web page from Firefox. The fonts are timy and all spacing is incorrect.
Prior to beta 4.12, the pages printed correctly. Now, the fonts are small and the text spacing is incorrect. All text has at least one extra space between the letters.
This happens on ALL sites when printing a web page.
I tried printing the same page in Internet Explorer and it prints correctly.See this thread:
*[/questions/787654] -
If a refund isn't available, any idea how to complete the download?
ThanksSorry, but according to Apple, iTunes Store: All Sales Are Final
You can avoid accidental purchases.
From the iTunes menu bar click iTunes / Preferences then select the Parental tab.
Select: iTunes Store
Click OK.
Maybe you are looking for
-
Hi, I am working on SQL extensions on XSLT using xalan SQL Library. My requirement is to insert some data which comes in the form of XML to one of our tables. I tried to write a sample XSLT to retrieve the data from the database (thought I can change
-
SQL Statement / Count & Percentage
Hello All, Below is the SQL statement that I'm using with an MS Access database. Now, I'm looking for an SQL statement that will get the same results using an SQL Compact database. Here is what I am using with MS Access that works great: queryString
-
EAS Console - Not getting the option "Refresh security from Shared Services"
Hi, In EAS Console 11.1.2.2, I am not getting the option "Refresh security from Shared Services" when I right click on Security (under Essbase Servers). However, I can see this option via EAS Console 11.1.1.3 (current existing version). Could you ple
-
How can one get Facetime for an Ipod Touch version 4.2
Purchased Itouch last year. Would like to install FaceTime app. Can not find it on Itunes. Is it even available?
-
Why isn't my iPhone calendar not syncing with my iPad 2
When I add an event in my iphone, it's not showing up in my ipad 2. I have icloud up and going