Pages: Special problem with duplex printing on hp310c

I used to produce and print double sided flyers with pages on my ipad4. My HP 310c printer is ready to print duplex. Everything worked fine until I loaded the IOS7 version of pages (Nov 13). Now there are problems. If I fold the flyer the second page is printed up side down. After some research in internet it seems to me that until the IOS 7 version pages had as default setting "flip on short edge" and now it changed to "flip on long edge". The mac version of pages allows you to toggle between this options (duplex printing). I see no way to change this on my ipad.
The problem seems to be a little bit tricky, but perhaps there is anybody out there to help me.
Thanks Manfred

TThat is my problem also. You are flipping to the long side, you need to flip to the short side. I order to get the back one to be right side up. I was able to get windows 8 to do that today without doing anything beside selecting landscape and flip to short side. But when I use my iPad I donot have that selection. I need software to be able to have that option.

Similar Messages

I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

Ralph, Thanks for replying. There where no received SIP messages at all just the INVITE being sent but I have made some more progress. The mini does indeed just work. I can do everything that you are supposed to do to other ichat users on the internet. Very nice.
The imac is still playing up but I have got further. I had peerguardian2 installed which unknown to me doesn't need to be running to prevent you for accessing 'barred' IP addresses. snatmap.mac.com is barred in the lists! I discovered this when I saw one of your other posts showed how to turn on terminal logging for ichat. Now that I have turned off peerguardian2 (using the disable filters option) I can make calls to the testbot and see the adverts. I have even done a video conference with the two testbots. I will just uninstall peerguardian2.
However, I can not get a AV chat working to a real user....
In response to your suggestions:-
I have tried all the options for quicktime streaming but will try 1.5Mb/s again.
The ichat bandwidth limit is set to "none". I am in New Zealand and I have standard ADSL (not ADSL2+) 7.6M down 512K up. The mini config is also set to none.
Internet sharing is off.
I have had parallels on the machine but the two interfaces that it installed "Parallels Host-Guest" and "Parallels NAT" are configured 'off' and show as not connected. Is this enough? I will uninstall parallels and see if that helps since I don't use it. I also have VMware's thing installed but that doesn't seem to add any interfaces.
I need to capture a full trace of the imac to other ichat user to see what is happening but will update when I have does your suggested changes or have a trace
Thanks again

Problem with duplex printing in smartforms

I have 2 pages in my smartform. both the page are with print mode 'D'(Duplex).
While printing the first page goes back for duplex printing but the output is printed on next page.
I want the second page to be printed at backside.
I have also tried other combination 1st page = D and 2nd page = ''. Nothing is working.
printer settings are all right also i have a different smartform it is printing in duplex mode and working fine.
what is the issue with this smartform?
Please help me.

hi,
in your main window of first page at the end adda an alternative -true or false
in the alternative add a condition saying if it is end of items.(end of items is nothing but a flag).
if this condition satisfies then call page 2 else call page1.
if it stil does not work then reply back then will give you another answer.
but before this is your output going to have multiple pages?

Problem with duplex printing - alternate pages upside down

I have been trying to print 2 per side, double sided from Adobe Reader. I have tried this as two up, duplex and also as booklet printing. Whatever I do, the second side is upside down. "Flip on long/short edge" appears to make no difference.
Trying to resolve it in the printer properties is worse: Adobe Reader seems to override them and I get single sheets single sided. If I select both "two sided" in the Reader dialog and "Duplex" in the printer dialog, the second side overprints the first side (but is the right way up!.
I am using Reader 10.1.2 with Windows 7 and an HP Deskjet 6980 printer with duplex unit using the Windows 7 default drivers. I have installed the "AdobeReaderPatch10.1.2_cpsid_92870.zip".
There must be a combination of settings which works! Can anybody help? Please?

TThat is my problem also. You are flipping to the long side, you need to flip to the short side. I order to get the back one to be right side up. I was able to get windows 8 to do that today without doing anything beside selecting landscape and flip to short side. But when I use my iPad I donot have that selection. I need software to be able to have that option.

Problem with duplex printing with smartfom?

hi all,
I have developed a smart form for PO printing. I need to display terms and conditions in the backside of first page. Next page onwards i need to display item details and texts which should be one side of page only.
I have set duplex printing mode for first page and terms and conditons are printing backside of the page.
The problem is second page also printing in duplex mode though i set single sided printing?
My page defintions are
page              next page       mode
first                back               D
Back              Next               space
Next               Last                S
Last               Next                S
Please help me how to set the output from second page should be in single sided per page?
Thanks,
Aravind

Hi,
page 1: main window
page 2 : business conditions...
put condition for first page main window that print only on first page.
or
you can put condition on second page that print on second page only. SFSY-PAGE = 'PAGE2'
Thanks,
suma.

Problems with duplex printing in Office 2004

My computer is a Mac Pro with the latest version of Leopard. My printer is an HP Laserjet 2420dn. One of its important features from my perspective is its two-sided printing feature. The two-sided feature works with PDF documents and Iwork "pages" documents but for it does not work with Word documents (Office 2004). In the case of the Word documents, the two-sided feature is listed as "off" and no box appears in the print pop-up for "two-sided." Obviously this is not correct as in system preferences, "duplex" is checked as on and of course it is working with other programs. Anyone have any ideas as to what might be going on here with word and duplex printing???

Hi Patricia,
We are using the same white paper 'How to web printing' and it is helping us a lot. We are also working on BW3.5. Without this enhancement, our reports were not printable at all.
Please let me know, if you need more information. Thx. Praveen

Urgent - Problem with Duplex Printing....

Hi All,
I need to print Terms & Condition on back side of the page while printing.
There is two windows of CONST type and having one standard text each.
My problem is that BACKpage is getting as BLANK, even I tried removing the standard text elements
and replaced with some direct text. Even then problem persists.
Please help me how get out of this problem,by avoiding blank pages,it's very urgent for me.
My page sequence is like this:
Page____Next page
FIRST -> BACK
BACK -> NEXT
NEXT -> BACK
Page FIRST and NEXT are coming fine but BACK is coming as blank.
Helpful answers will be certianly rewarded
Thank & Regards,
V.Raghavender.

Hi,
Under Page->output optionsPrint mode is D or not check once.
If that is D only then output will be come back side.
Regards,
Shiva Kumar

Problem with duplex printing on CP1515 printer

I'm on win7 OS, I'm connected to CP1515 printer through USB cable. I'm using a universal driver. My problem is I set to print both sides on the printer settings but it still printing on one side of a paper.

Hello,
did you find a solution? I have the same problem: print ADS forms on zebra with black background and withe text.
Regards.
Benjamin

Problem Scanning Duplex Printed Document

I would appreciate help with the problem described below. Problem: Scanning duplex printed document scans first page Perfectly but second page comes out solid black. OS: Windows 7
Printer: Canon PIXMA MX860
Software App: Canon MP Navigator EX - mx860 series I would appreciate your help in solving this problem.Thank you,
--Dennis--

Thank You for the advice. I called technical help and Jesse spent considerable time and effort to help me solve the problem. The final verdict is that their is a hardware glitch, not software, The nearest Canon repair center is apparently in some place called Lake Forest, CA. I was born and lived all my life in Southern CA and never heard of Lake Forest. It must be in Northern CA so I can't simply take it in to the shop for repairs. Jesse informed me of a consumer loyalty discount available if I should wish to purchase a new printer.

T.code FBL5N: a problem with the print of the output list

Hi All,
with reference to the t.code FBL5N, I have a problem with the print of the output list of the report.
When I execute the print, I obtain one customer for each page printed.
I wonder if is possible to obtain more customers for each page printed.
Could anyone help me?
Thanks
Gandalf
Edited by: Umberto Gandalf on Dec 21, 2008 10:36 PM

Hi,
Though personally i havent tried this option, check the same
Go to Menu: Settings >> Switch List
This will make the value displayed in ALV format and then try taking print outs.
Regards,
Sridevi

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

There is a problem with the printer or ink system.

Will not print. Turn it off then back on; will print one document, but not the last page. Try printing only the last page, but will not print. Will not print one page documents at all. Will not print more than one document without repeating this process.
First Error message: "There is a problem with the printer or ink system. Turn the printer off, then on. If you continue to get this message, contact HP." Out of warranty.
Tried this page: http://support.hp.com/us-en/document/c03081973
Which led me to this page: http://support.hp.com/us-en/document/c03262508
Now that the ink cartridges are removed as instructed, the carriage will not return to the center of the access area.

Hey @KennyBee51,
Thanks again for getting back to me regarding this issue.
I would have to agree that the HP Officejets Printhead system is defective. I would recommend at this time that you contact our Technical Support queue by phone to explore additional hardware options.
HP Technical Support can be reached at: 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
HP Worldwide Contact
It has been a pleasure working with you. I wish you luck going forward with this!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Problem with java print

Hi, I'm have problems with java print (g2d). For example i want to print a String "ABC**************************DEF" on paper size 80mm width (invoice paper). I can print all that string with paper A4 size, but with paper size 80mm i have problem with that String, the result is "C*****************D" lost AB and EF. I think i had problem with paper size, pls help me. Thank you so much.
My code is below:
package app.util;
To change this template, choose Tools | Templates
and open the template in the editor.
@author HUU NGHIA
// Printing Sample code
// This code demonstrates the Java 2 print mechanism
import com.connection.Product;
import java.awt.;
import java.awt.print.;
import java.text.SimpleDateFormat;
import java.util.Date;
import java.util.Vector;
// Define a class that is called per page that needs printing. It implements
// the one and only method in the Printable interface : print. Note that
// this is quite separate from the PrinterJob class print() method.
// This method does not actually do any printing. All it does is write text
// and/or graphics onto the passed page (graphics context). The calling
// printer job object will then pass this page to the printer.
public class PrinterController {
public static void print(Vector<Product> products) {
// Create an object that will hold all print parameters, such as
// page size, printer resolution. In addition, it manages the print
// process (job).
PrinterJob job = PrinterJob.getPrinterJob();
// It is first called to tell it what object will print each page.
job.setPrintable(new PrintObject(products));
// Then it is called to display the standard print options dialog.
if (job.printDialog()) {
// If the user has pressed OK (printDialog returns true), then go
// ahead with the printing. This is started by the simple call to
// the job print() method. When it runs, it calls the page print
// object for page index 0. Then page index 1, 2, and so on
// until NO_SUCH_PAGE is returned.
try {
job.print();
} catch (PrinterException e) {
e.printStackTrace();
class PrintObject implements Printable {
Vector<Product> products;
public PrintObject(Vector<Product> products) {
this.products = products;
public int print(Graphics g, PageFormat f, int pageIndex) {
Graphics2D g2 = (Graphics2D) g; // Allow use of Java 2 graphics on
// the print pages :
System.out.println("f.getImageableX(): " f.getImageableX());
// A simple circle to go on the second page (index = 1).
switch (pageIndex) {
case 0:
printInvoiceTemplate(g2, products);
return PAGE_EXISTS;
// case 1 : g2.setColor(Color.red); // Page 2 : print a circle
// g2.draw(circle);
// return PAGE_EXISTS;
default:
return NO_SUCH_PAGE; // No other pages
public String getDate(){
Date d = new Date();
SimpleDateFormat sp = new SimpleDateFormat("dd/MM/yyyy hh:mm:ss");
return sp.format(d);
private void printInvoiceTemplate(Graphics2D g2, Vector<Product> products) {
//System.out.println("#######" cardInfo.getTranType());
int alignY = 40;
int alignXCenter = 60;
int enterSpace = 15;
int xProductName = 10;
int xUnit = 85;
int xAmt = 110;
int xTotal = 155;
int yEndData = 0;
int totalAll = 0;
g2.setColor(Color.black); // Page 1 : print a rectangle
g2.setFont(new Font("Verdana", 0, 8));
g2.drawString("ABC", alignXCenter, alignY);
g2.drawString("123WWW", alignXCenter, alignY enterSpace *1);
g2.drawString("Phone: (08)62891633", alignXCenter, alignY enterSpace*2);
g2.setFont(new Font("Verdana", 1, 12));
g2.drawString("Invoice", alignXCenter - 10, alignY enterSpace*4);
products = new Vector<Product>();
for (int i = 0; i < 10; i+) {
Product product = new Product();
product.setProductName("ZESTORETIC TAB 20MG B/28" i);
product.setUnit("v"+i);
product.setAmt(5+i);
product.setPrice(50000+i);
products.add(product);
for (int i = 0; i < products.size(); i+) {
System.err.println(i);
int total = products.get(i).getAmt()*products.get(i).getPrice();
g2.drawString(i+1+"."products.get(i).getProductName(), xProductName+2, alignY enterSpace(8+(i*2)));
g2.drawString(products.get(i).getUnit(), xUnit+5, alignY enterSpace*(9(i*2)));
g2.drawString(products.get(i).getAmt()"x"+AppUtils.formatPrice(products.get(i).getPrice())"", xAmt+5, alignY enterSpace*(9(i*2)));
g2.drawString(AppUtils.formatPrice(total), xTotal+15, alignY enterSpace*(9(i*2)));
yEndData = 9+(i*2);
totalAll = totalAll total;
System.out.println(yEndData);
g2.drawLine(xProductName, alignY enterSpace*(yEndData 1), 210, alignY enterSpace*(yEndData 1));
g2.drawString(AppUtils.formatPrice(totalAll)" VND", xAmt, alignY enterSpace*(yEndData 2));
g2.drawString("Thank you", alignXCenter, alignY enterSpace*(yEndData 4));
g2.drawString("***", alignXCenter 30, alignY enterSpace*(yEndData + 5));
public static void main(String[] args) {
PrinterController.print(null);
}

When you posted you didn't use code tags, as a result the forum software has interpreted some of your characters in your program as screen formatting codes and has corrupted your post--the most easily observable change is the bolded characters in you post. Please repost your code using code tags so people will be helping with uncorrupted code.

CUPS problems with PDF printing

I am having all manner of problems with PDF printing. Recently added a Lexmark MX710 and have 7 machines that were previously printing fine to an X652de a T652 as well as a Samsung CLP770. All network printers.
Now there are bizarre issues with PDF printing. CUPS version 1.6.1. The MX710 will blue screen and reboot when printing one specific pdf without fail. There are all kinds of random nonsensical results when printing from different locations. A pdf that stalls the X and T652 with "filter error" will print from my own machine to the same printer, using the same versions of cups, .ppd file, and everything package related to cups.
Yet other PDF files will print, while some print complete gibberish, I can't find any rhyme or reason or anything predictable about any of it other than to say printing postscript files works fine all around.
This has been universally in KDE printing through Okular.
I've tried some things I've found suggested, such as modifying the mime.conv as suggested by an old ubuntu thread, adding the a2ps package, all to zero effect.
Last edited by TheWretched (2012-12-08 00:27:41)

At this point the only reasonable explanation I can think of is that the ppd package I downloaded and installed via included shell script from lexmark for the mx710 caused this whole catastrophe. The only common thread for this problem starting was that I used this on all of the affected machines and they now all manifest problems. And on four of these machines this is literally all that was done, they were loaded in september, have not been updated via pacman in any way, and are running the exact same version of cups poppler, and okular that they were then, which was working, and now cannot print pdf to any printer at all without causing one of several problems depending on the printer.
I cannot seem to get this reversed though. I've gone so far as to force remove all the cups packages, and delete the files associated with the install script, but the problem remains afterward. From what I can see so far all this lexmark package did was display a license agreement, then copy the ppd files in it's folder to /usr/share/ppd/Lexmark. This particular printer, the mx710 has no .ppd available that I have found other than this one from Lexmark directly. Open printing doesn't have anything for this model.
This printer's driver has some kind of a cups filter driver with it that the install script presumably installs, I suspect this could be what caused the problem specifically, but I must not be removing it correctly, despite following the file removal suggestions in the Lexmark readme for uninstallation. CUPS printing is something I am new to and only have a basic understanding of.
To answer some specific questions I nearly forgot, I don't have cups pdf installed. I have chrome installed which can successfully save pages to PDF, previously it could also print pdf, and presumably it prints everything as pdf given the cups pdf workflow. That is also broken now too, so printing from the browser causes the printer to fail as well. If I save as pdf from chrome, and print with adobe reader, it works.
Last edited by TheWretched (2012-12-11 14:25:40)

Bizarre freezing problem with FireFox & printing from Wikipedia

The Suspects:
Mac Pro
OS X 10.4.11
Firefox 2.0.0.13
wikipedia.org
Brother HL-5240
I bought a Brother HL-5240 laser printer a couple months ago and I'm really happy with it. A couple minutes ago I went to print some stuff from apple.com, then I went to wikipedia.org to print out some pages there. Immediately after clicking "Print" in the print dialog box, I got everyone's favorite spinning cursor.
Huh... weird. I've never had a problem with this printer. I wait a little while, but Firefox is completely frozen up, which is ok since I accidentally printed the normal version and not the "printable version." I force quit and reopen. I try it again, this time with the "printable version" with the same result, spinning cursor, everything frozen. Force quit, reopen.
Now I decide that I'm going to try to save it as a PDF from the print dialog. Again, same result! Everything is frozen!
Time for Safari, it prints everything just fine.
Anyone else run into this utterly strange problem?

hello, firefox 19 has introduced its own integrated pdf viewer - if you want to switch back to the plugin you've used before to view pdfs just go to firefox > options > applications & scroll down and define the default action for the '''portable document format (pdf)'''.
[[How to disable the built-in PDF viewer and use another viewer]]

Pages: Special problem with duplex printing on hp310c

Similar Messages

Maybe you are looking for