Pages: Table runs past the page ...

I have a table that is longer than the rest of the page from where I want it to start, so for some reason it refuses to continue the table through to the next page, instead the whole table is pushed to the beginning of the next page. I've been trying to figure this out for weeks but for the life of me, I cannot understand why Pages is doing this and how to fix it ... if someone could please help me with this I'd appreciate it, thank you!

Anyone??

Similar Messages

Complicated Question (see pdf): Use data from one table to find the same data in a second table and take other data from that table and place it in a third table. :)

I don't even know if this is posible.
I'm using iwork '09
View PDF

I hope I can clarify:
For our purposes here:
Table 1 = "Step 2 - Product Sizes"
Table 2 = "Option id Master"
Table 3 = "Export - Product Info"
Table 1:
The user would enter values for "productcode," "Horz," and "Vert"
"Size" would auto fill based on values in Horiz and Vert (I have this taken care of already).
Table 2: This is a completely static table that I want to search against. - Data from other tables in the doc does not alter or change the data in this doc.
We just want to look at table 2. Find the existing value in "table 2 : size" column that matches the "table 1 : size" column and then pull the "optionids" and "productprice" from that row.
Can the value from "Table 1 : Size" be used as a search term in "Table 2 : Size?"
Table 3: The user does not enter any values on this table.
"productcode" is pulled from table 1 - "Table 1 :: A5" = "Table 3 :: A5"
"optionids" and "productprice" are pulled from Table 2 columns "D" and "E" - however we do not know which Table 2 row it is pulling from until we enter data in Table 1.
As I'm writing this I'm realizing that
A. this is probably really confusing to you.
B. this may be impossible inside of numbers.
If you have some other method that would facilitate the same out come but be structured differently please let me know.
--- maybe to help you understand further what I am doing here is my current workflow:
I record the size of a piece of art.
Then I manually go to my "Option id Master" and find the same size.
I then copy the corresponding "optionids" and "productprice" cells. (these options control the prices displayed on my website)
I got to my "Export - Product Info" table and paste the values in the corresponding cells.
I was hoping to automate this as it takes a long time when you have hundreds of products.
Thanks for the help!

Trial version will not run past splash screen

I hope someone can help please!
I downloaded the trial of dreamweaver 8 yesterday & I
installed it & ran just fine. Today it will not run past the
splash screen. It comes up & asks if I want to buy or carry on
the trial - I pick trial, and the dreamweaver 8 splash screen comes
up, and then nothing happens. The program doesn't start. I
uninstalled it & reinstalled. I re-booted etc. - still no go.
The other trial I downloaded (firestarter) works just fine still.
I am running windows XP media center edition service pack 2.
Can anyone help please?

Has it ever run?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Janey_Mac" <[email protected]> wrote in
message
news:e6pv9b$sl9$[email protected]..
> I'm desperate!
> Can anyone help please?
> Macromedia does not provide tech support for the trial
version, but before
> I spend the money on the product I need to know that it
will work. Catch
> 22!
>

I have a 15 inch mac book pro running osx 10.5.8. I recently moved to FL and switched to Comcast (only option). Now when I access one of my banks, I can get past the login page and the opening page of my account but the data is unavailable. Bank no help.

I have a 15 inch mac book pro running osx 10.5.8. I recently moved to Florida and switched to Comcast (the only option). Now when I access my bank website, I can get past the login to my account page but the data is permanently unavailable. The bank says no one else has this problem. Everything is up to date as far as software is concerned. . .I just update anything that comes up. I have not had this problem with this computer anywhere else and I am not having a problem with any other website. I have the problem with both Safari and Google Chrome.

Harden your Mac against malware attacks

Safari it will not advance past the first page of a PDF Document

Running Safari 5.1 under Snow Leopard 10.6.8 on a d MacBook Pro when I try to read a PDF document in Safari it will not advance past the first page. I get the first page of the document in the browser window. No navigation in the toolbar, the up, down, right and left arrows do nothing nor does the return/enter key.

If you are using Adobe Acrobat > Apple Safari 5.1 and Adobe Reader/Acrobat Advisory

Photos update won't open past the "preparing library" page

iPhoto just updated to Photo 2015. I can't get to my pictures because the app won't open past the "preparing library" page.
The iPhoto update, under Apps, won't let me resume the update - I get an error "this item is temporarily unavailable".
Any ideas?

Hi wolfey_j
Welcome to apple discussions.
Drag and drop the plist for iDvd to the trash followed by a full restart of your mac and then repair permissions from apple's disc utility (application > utilities > disc utility)
The plist for iDvd looks like this:
com.apple.iDvd.plist
If that fails to resolve this issue then delete iDvd using this free download from apple's web site:
http://www.apple.com/downloads/macosx/systemdiskutilities/appdelete.html
You'll need to re-install iDvd again (custom install from the software that shipped with your mac or any retail copy of iLife'09). And lastly run apple's software updater from system preferences so all is up to date again. (not a bad idea to repair permissions one more time after updating all apps.)
Hope this resolves the issue/s but if not just come on back.
Good luck.

If i cut and paste in email, while on firefox, as i try to paste, the rest of page goes into blue and if i go ahead and past, it erases rest of page that goes blue thx

when cutting and pasting in yahoo email, as i push paste, the rest of the page goes into and is replaced by what i paste, instead of bein added to

The ChromEdit Plus extension automatically creates a '''user.js''' ''(and the other 2 "user" files)'' upon installation, and it provides an interface within Firefox for editing those "user" files.
http://webdesigns.ms11.net/chromeditp.html
It makes it so you don't have to go hunting around for your Profile folder whenever you want to edit those "user" files by allowing you to access those files from within Firefox while it is running.
FYI, this support article might be a little more helpful for doing the user.js file manually than what you cited as having read. <br />
http://kb.mozillazine.org/User.js_file

I keep having to restart my computer. It say firefox is running in the background but I cannot load another page

I keep getting the message that Firefox is running in the background and I cannot load another page. I have to restart my computer to get Firefox back to operating normally. I have everything closed down as far as I can tell. But when I click on the Icon it will not start another page. It just keeps telling me to shut down all browser windows and that Firefox is running in the background. I even go to ctrl/alt/delete and look at the tasks running. Nothing! It is happening a lot more often now and I hate to use Internet Explorer. I have depended a lot more on Mozilla in the past few years now and I like it. This is driving me nuts. Please help. Thank You

Did you check the Processes tab in the Task Manager?
See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

HT5517 how do I get past the home sharing page. I've done everything, I think

how do I get past the homesharing/computer/settings page?

You must close:
- iTunes
- Simulator
- Xcode
- Application Loader
...and...run Activity Monitor, locate and kill 'iTunes Helper', then try installing again.

How do I change the compatibility view so that my words are not running off the page?

I do data entry and in the system I am working on the words are running off the page. In internet explorer there is a little broken page on the tool bar that lets you change the compatibility and I am not finding anything like that with firefox. Please advise how I can change the setting so that the words will wrap correctly.

As far as I know, Firefox doesn't have a similar compatibility feature.
I assume this system is not accessible to forum volunteers, so I'm going to ask you to do a little sleuthing. I assume you are entering text in a multi-line textbox (an HTML <textarea> control). Could you do the following:
* Have your text entry form open in one tab, and a reply to this thread in another tab.
* Right-click in the control that doesn't wrap and choose Inspect Element. A small pane should open with part of the HTML highlighted in blue.
* Right-click the highlighted <textarea> tag and choose Copy Outer HTML.
* In your reply tab, paste the HTML, and remove the leading < character to avoid messing up your post. This will show any legacy settings on the tag that might be affecting how it wraps.
Here's an example using this very box:
textarea style="width: 567px; height: 616px;" rows="10" name="content" required="required" placeholder="Enter your reply here." cols="40" id="id_content"></textarea>
If it's not a textarea, then that would be useful to know as well.
* Back in your form, you may or may not have a pane to the right that shows various style rules. If not, click the Style button at the lower right to open it. Look for any rules with the '''white-space''' property (the properties normally appear in colored text). If you find one, right-click and choose Copy declaration line. Switch back to this tab and paste the rule.
With that information, hopefully we can find a workaround.

Data runs off the end of the page

I have a form which is flowed and the rows and table are set to allow page breaks. However, when a cell has more content than will fit on a certain page, it does not go to the next page, it just runs off the end of the page. Does anyone know why?
Thanks!

Couple of questions, are you interactively entering data or are you merging data?
What is the xfa template version or what do you have chosen as the Target version?
If you click on the cell in Designer and go to the Layout tab, under Height is the "expand to fit" checked?

My MacBook Pro won't go past the white apple page

My computer won't go past the white apple page with the spinning wheel when you turn it on.

This should fix the problem:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Why doesn't Firefox stop scrolling past the top of the page?

When I scroll to the top of a webpage Firefox will not stop there. I goes past the top of the webpage and shows a white square to the left and a grey bar to the left, then it bounces back down to the top of the page. I want Firefox to just go to the top of the page and stop the way it used to do.

Hello BK_Malik, '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
check if is the Yet Another Smooth Scrolling add-on, just a guess !
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?

Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?

Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?

How can I make a intro page for my website, then after the intro has run make the page automatically change to my we site home screen

how can I make a intro page for my website, then after the intro has run make the page automatically change to my website's home screen

You can do this using a meta refresh but the problem is you have to add it to the html file for the page very time you publish changes.
A better way is to create a splash page and upload it to the server outside of the folder produced by iWeb. Example HERE.
The meta refresh is added to the head section of the html file...
<meta http-equiv="refresh" content="32;url=http://www.domain.about.com/Page-Name.html">
The delay time in seconds is marked in blue and the URL to the redirect page is in red.

Pages: Table runs past the page ...

Similar Messages

Maybe you are looking for