Pages to DocX Export Makes Everything Bold

I'm using Pages 5.1 to email out my resume, and everytime I export the document into .docx for submission it makes everything on my resume Bold in the .docx version. I've tried changing the .docx with Pages but when I go to save the changes it will only let me save a new version of the .pages file. If I try to use the .pages document to overwrite the existing .docx file the new file it creates makes everying bold again.
I'm astonished that there appears to be no way around this. The font I'm using is Arial and everything is in a very standard format.
Please tell me there is something I can do.

That works, but there are jobs that specifically ask for certain formats, like docx.
Thanks though

Similar Messages

Page Break - Not Exporting to PDF Correctly (with Page View)

I am struggling maintaining page breaks upon export of the Form to a PDF even though the Form is set as "Page View". Is there a way to correct this either on the FormsCentral side or acrobat side. It is extremely frustrating not to have page breaks where designed. Any help would be greatly appreciated.
Adrian

Have you checked the Window>Utilities>Background Tasks
CS5 now exports PDFs in the Background and thus you will have a 0kb file until the task completes.
If the Background Task isn't moving then make sure you're fully up-to-date with the software using Help>Updates
If you're still having a problem then try inserting the indesign file into a Book file - and then use the Book Panel sub menu to Export Book to PDF.
This does not use the Background Task and might output the PDF for you.

HT5534 can i save the file which is edited in pages as docx,pdf etc????

can i save the file which is edited in pages as docx,pdf etc????

Use either the File menu > Export or Share menu > Export & choose the format.

Keep specific colour of an object and make everything else b & w... help :(

how do I keep the colour of, say a football, in red and make everything else in the clip black and white?

Kevin Brock wrote:
stuckfootage wrote:
http://www.lafcpug.org/tutorials/basicpleasantvillelook.html
Man, if I only had a $ for each time this link was shown to someone on this forum.
<chuckle> Googling around, there are lots of explanations how to do this
effect online, but I think the LAFPUG page is the easiest to understand.
That's the nature of these forums, that people keep asking the same
questions over and over.

Page arrangement when exporting to PDF

Whenever I layout pamphlets that will be printed on 8.5x11 paper, I set up 5.5x8.5 facing pages, and then do each page so that they go back and forth down the line until i get to the centerfold, where they then go back up the line back and forth filling in empty pages. Does that make sense? So, I do this all the time, and when I export to PDF, the PDF always shows each pair of facing pages as a single page to be printed on one side of a sheet of 8.5x11 paper. But for some unknown reason (I haven't updated any of my programs, as my computer is too old to do that) when I exported to PDF, both Reader and Acrobat open the PDF up with each individual page by itself, one above the other, until I go into "View" and select Page Display, and then Two-up. But I wanna know why it's displaying it differently, and if there's a way I can make it always display the way it used to instead of this new way.

You might find this a lot easier if you set up as 5.5 x 8.5 facing pages and worked in reader's spreads (consecutive order). That way you get to look at the layout as your readers will be seeing it, and there's less chance of making an imposition mistake. The first and last pages will be by themselves and the others will appear as spreads, just as they will in the booklet.
When you are ready to print, use File > Print Booklet... to set up the imposition. Your tags indicate CS3, though you don't mention the OS, so I don't know if the Adobe PDF virtual printer is available to you, but if you are printing in-house on a laser printer with duplexing capabiliies it isn't required as you can print directly to the device. Printing to PDF is a convenience that will allow you to manually duplex. If you need the PDF, and cannot print to the virtual printer, there are some scripts you can use to impose the booklet instead of Print Booklet, so let us know.

Missing page header when exporting a Numbers sheet to PDF??

I am running OS X 10.8.5 and Numbers 09 Version 2.3, all on a 2009 MBP.
I created a simple table and have a page header (title, etc).
When I print this file directly from Numbers to the printer, everything is okay.
But when I export the file to PDF and print the PDF, the header is gone.
Any thoughts?

I have done some addtional problem solving. I now have the issue isolated to the export function. It does not export the page header when exporting to PDF. It does do it when exporting to file type - post script.
Interesting.
Anybody got something to add here?

How do I convert Pages to .docx documents. All I get is Word 97.

For some reason, my employer insists that in order to upload stories that appear in her bi-weekly tabloid, the manuscripts must be in .docx and nothing else. She is adamant. I use Mac OS 10.8.3 (Lion) and Pages 4.3. When I convert it to a Word document, it converts to Word 97. Is there any way in which Pages will convert to .docx?

Hi Herb,
" It is my hope that I will be able to convert documents from Pages into .docx."
You will. It will be a two stage conversion, though: Export the Pages document of Word (.doc) format, Open that document in Libre office, then save it as .docx.
Keep an eye out for formatting issues. Translations are not perfect.
Regards,
Barry

Hyperlinks are dead when Pages file is exported as a PDF

When I export a file from Pages '09, version 4.0.5, to a PDF file, the hyperlinks do not work. The Pages help menu states "Hyperlinks in your Pages document are exported to the PDF file. Hyperlinks are also created in the PDF file for table of contents entries, footnotes and endnotes, webpages, email addresses, and bookmarks." I am opening the PDF files in Acrobat Reader. What is the problem here?

Markleynt wrote:
I discovered the problem. Being new to Pages, I did not realize that the text layer had to be in front of the transparent shapes that I was using as backgrounds, in order for the links to be clickable in a pdf file.
For sure, putting background objects *_at front_* is not a good idea
Yvan KOENIG (VALLAURIS, France) lundi 28 février 2011 10:09:48

Last page rasterizing when exporting to EPUB from Indesign

Hello all,
I currently have a problem with the last page of my EPUB book rasterizing. This shows up in both Adobe digital Additions and iBooks. I cannot fathom why it is doing it, is there anyone who has come across this before?
fyi. It doesnt seem to matter what content is on the last page, the whole page turns into a flattened image (even text). I originally created the EPUB on Snow leapoard on OSX and recently upgraded to mountain Lion and I'm on Indesign CS6.
Any light on this subject would be greatly appreciated.
Many thanks
Leonie

I've never heard of InDesign rasterizing the last page during EPUB export. I'd try the usual troubleshooting techniques.
Start by restoring your InDesign preferences. Here's how:
http://pfl.com/trb
If that doesn't work, try saving your InDesign file as IDML and reopening it. Here's how:
http://www.pfl.com/cidf

Can't Choose Page Range when Exporting PDF from InDesign

Hi! Ever since I upgraded to CS6 via your subscription, I can't choose a page-range when exporting to PDF from InDesign (8.0.1). Here's a video demonstration of the problem so you can see the bug in action: http://screencast.com/t/kYR1ACtNi
Are you aware of this bug? If it's not a bug, how do I fix it?

Alternate layouts are used for things like horizontal and vertical orientations of the same layout for use on tablets. I suspect there's some coverage in the Help files -- being a print guy I don't mess with them.
It may be that you only have one layout and ID just shows you that one inthe dropdown. I can't recall that I ever used the dropdown to try to select the range -- I always just type what I need in the field.

Trying to add 2 slideshows to one page, how can I make a slideshow so it does not show an image...

Trying to add 2 slideshows to one page, how can I make a slideshow so it does not show an image until they click on the thumbnail?

You can do this with "composition" widgets.

HT201210 when I want to make a call show me the call back page and i cant make call

when I want to make a call show me the call back page and i cant make call

You helped me a lot, man!
I've been having the same problem for a long time ever since I changed to a new phone provider with a new sim which works with other phone except my iPhone 4. I just wouldn't make call but can send SMS and receive calls. Now, when I turned off 'call waiting' I could make phone calls. Thanks a million again!
P.S. When I turn on 'call waiting' again I could make call without problem any more. What a heck!

How to make characters bold

Hi all,
I send an email that creates an excel file in it. What I want is that some characters or cells should be bold. It can be done through OLE but Ole creates excel file on presantation server and it is not possible to send this excel file via email.
I wonder whether there is any way to make cells bold in an excel sent as attachment via email.
Thanks.
deniz.

hi,
try this.
FORMAT INTENSIFIED ON.
WRITE: 'Your text or any Variable'.
FORMAT INTENSIFIED OFF.

Script to make texts bold or italic

I saw someone suggested the following code to meet the need:
var app = new Illustrator.Application();
var doc = app.ActiveDocument;
var bold = doc.CharacterStyles["Bold"];
var italic = doc.CharacterStyles["Italics"];
var frame = doc.TextFrames[0];
bold.ApplyTo(frame);
italic.ApplyTo(frame);
But it does work in my case since "doc.CharacterStyles["Bold"];" and "doc.CharacterStyles["Italics"]" declare an error message of "No such element". Is there another way that I can try to make texts bold or italic?

look here
http://forums.adobe.com/thread/881071?tstart=0

Headphone jack on the X-Fi I/O drive makes everything go mute.

>Headphone jack on the X-Fi I/O dri've makes everything go mute.eBefore we begin...
Yes, my dri've is hooked up correctly.
Yes, the volume knob on the headphones are turned up.
Yes, I do have the latest drivers and software.
Running Windows 7 Home (64bit) and updated. ?All hardware is running latest drivers, software, and BIOS.
Now that that's out of the way, the headphone jack on the I/O dri've is causing problems. ?Audio comes out normally from the speakers. ?If I plug my the mic in to the mic jack on the I/O dri've, everything is fine. ?I can hear myself just fine through the normal speakers. ?Now if I connect to the headphone jack, everything goes mute. ?No sound from the headphones or speakers and the mic doesn't work. ?If I unplug the headphones, everything remains muted. ?Even after running diagnostics and restoring defaults, everything remains muted.
The funny thing is I can still plug into my case's headphone jack and music will play from it. ?Go figure.
The only solution thus far is a reboot. ?Unacceptable.
What's the problem and I how do I fix it's

B&Just realized that the Beta driver introduced a new problem. ?Although the inputs are now working, the sound is terrible. ?The volume keeps fluctuating rapidly (not the level that I can control). ?If you leave the volume at a set level, you can notice that it is behaving erradically.

Pages to DocX Export Makes Everything Bold

Similar Messages

Maybe you are looking for