Pages update WHEN??
I was really hoping by now that we would have seen 1.1 update to Pages. I would love to seem some of the bugs that I think are simple fixes to be addressed. I thing that the speed should be improved, the font handling should come back to the menu bar. I know that for most that is not an issue, but on a 12 it is. Also, I would love to see the window position remembered and also that space on the left gone.
Well, I hope soon.
Rino
Rino,
You should use the Send Feedback option from within Pages to let Apple know what your update priorities are. It's unlikely they read this forum. As to when the next update will appear, no one knows. Apple is notoriously tight-lipped about schedules.
Similar Messages
-
Why won't the page update when I enable the radios on my AIR - LAP1131AG?
I'm trying to configure this AP. Every time I change something I get a pop-up box saying that it will be updated. For some reason, when I try to enable the radios, I get no box and, although the Apply button clicks, it doesn't do anything.
Can anyone shed any light on this?
Thanks,Well because CLI is awesome? haha
Though seriously, UI has never been a problem with Cisco,
Through I do recommend doing this
1. Use IE(internet exp) considering your AP is quite old, EoS level old, you probably should and also lower down the sec. settings on the browser as well, and disable pop-up blocker
2. technical causes:
A. Your configuration is still lacking/some errors, make sure to verify, most config errors are missing VLANs, guest-mode not enabled or if MBSSID, then well, MBSSID mode, bridge-group ID for MBSSID
B. You power supply device (PoE or power-supply) is not supplying enought power, check through UI(only way as well is throughUI)
AT: Software Tab
CLICK: System Configuration
SEE: System Power Settings
Rate or Mark as Answer helpful post :) -
I have downloaded the latest pages update on my iPad, but my iMac still has Pages version 4.3, and I cannot find out how to update it on my desktop. When I try to send something from my iPad pages via email to be opened on my desktop in Pages, it won't open in Pages. I get a message that it can't be opened because the version is too old. I sent the document as a PDF and it worked. But I want to be able to use Pages back and forth. HOw do I update the Pages version on my desktop iMac?
The file format used by the iOS versions of the iWork apps can only be read by the new iWork apps on your Mac - i.e. Keynote 6, Pages 5 & Numbers 3. Those versions for the Mac require Mavericks, OS X 10.9. The "too old" error on a Mac comes if you are trying to open an iWork '08 or earlier file in the newest apps. If you do have the newest apps you can open the files from your iPad.
If you can't or don't want to upgrade to Mavericks & the newest iWork apps your best option would be to export/share the files from the iPad to a type an older version of iWork can read such as Word, text, Excel, etc.
Or contact AppleCare. They made this mess, let them fix it. -
When I try to open a Pages document from iCloud, created on my iPad, I get message stating I need a newer version of Pages. When I go to app store all I get is "installed" when looking at pages app. my Macbook pro is up to date with all updates. Any ideas?
You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5/5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Pages 5.1 sometimes can not open its own files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has not only managed to confuse all its users, but also itself.
Note: Apple has removed over 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter -
Problem description:
(MacBook Pro 15” late 2008, OSX Yosemite 10.10.2 installed, no pending updates) computer is running very slow - takes 2-3 minutes to open apps such as Pages, even when no other apps are open. Randomly freezes and becomes unresponsive, requiring forced power down. Randomly logs off. Removed Kodak AIO software via Clean My Mac2, but BonjourAgent still there and requesting access. Cleaned weekly with Clean My Mac2 and running Sophos AntiVirus. 2GB memory installed. Currently 169.99 GB available of 249.2 GB capacity.
Help?
EtreCheck version: 2.1.8 (121)
Report generated March 21, 2015 at 11:35:35 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Late 2008) (Technical Specifications)
MacBook Pro - model: MacBookPro5,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 0/DIMM1
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 59
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1440 x 900
NVIDIA GeForce 9600M GT - VRAM: 256 MB
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 0:13:37
Disk Information: ℹ️
Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 249.20 GB (168.91 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS21N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[not loaded] com.leapfrog.driver.LfConnectDriver (1.11.1 - SDK 10.10) [Click for support]
[loaded] com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
[loaded] com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] com.leapfrog.codeless.kext (2) [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.kodak.BonjourAgent.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.sophos.uiserver.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.leapfrog.connect.authdaemon.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.sophos.common.servicemanager.plist [Click for support]
User Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
User Login Items: ℹ️
Dropbox Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
AmazonMP3DownloaderPlugin1017265: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 31 Check version
AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.94 [Click for support]
Google Earth Web Plug-in: Version: 6.0 [Click for support]
Safari Extensions: ℹ️
AdBlock
Disconnect
Add To Amazon Wish List
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
Tuxera NTFS [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 249.20 GB Disk used: 80.29 GB
Destinations:
Backup [Local]
Total size: 63.67 GB
Total number of backups: 1
Oldest backup: 2015-02-23 16:16:08 +0000
Last backup: 2015-02-23 16:16:08 +0000
Size of backup disk: Too small
Backup size 63.67 GB < (Disk used 80.29 GB X 3)
Top Processes by CPU: ℹ️
5% WindowServer
1% loginwindow
0% AppleSpell
0% SophosUIServer
0% SophosAntiVirus
Top Processes by Memory: ℹ️
118 MB InterCheck
101 MB SophosScanD
60 MB Dropbox
54 MB mds_stores
41 MB SophosAntiVirus
Virtual Memory Information: ℹ️
49 MB Free RAM
682 MB Active RAM
652 MB Inactive RAM
315 MB Wired RAM
1.49 GB Page-ins
2 MB Page-outs
Diagnostics Information: ℹ️
Mar 21, 2015, 11:18:52 AM Self test - passed
Mar 21, 2015, 10:53:03 AM /Library/Logs/DiagnosticReports/SophosUIServer_2015-03-21-105303_[redacted].cra sh
Mar 19, 2015, 07:59:03 PM /Library/Logs/DiagnosticReports/CalNCService_2015-03-19-195903_[redacted].crashLinc Davis wrote:
Slow performance after installing Yosemite on an older Mac is often caused by inadequate memory. Although you can install the upgrade on a Mac with 2 GB of memory, experience has shown that at least 4 GB is needed for full performance.
Select About This Mac from the Apple menu. If you have less than 4 GB of memory, and your model has upgradable memory, install as much as it can take, or at least that much. Any reputable RAM vendor will have a web form in which you can select the Mac model and be directed to compatible parts.
Memory in the MacBook Air is not upgradable. If that's what you have, you should restore the previous system from a backup, or replace the machine. Ask if you need guidance.
The Etrecheck report clearly shows that SylvieRose has a Macbook Pro, not a Macbook Air and that there are only 2 GB RAM installed. The Etrecheck report can be very informative if one takes the time to examine it.
Ciao. -
I am a web designer. I have saved pages that I update and upload to websites all the time. Now, after the latest updates, when I try to open these saved pages it only opens Firefox and loads the homepage. The saved page does not open. If I'm to keep using Firefox, which I would prefer, I need this functionality back.
''jscher2000 [[#answer-670981|said]]''
<blockquote>
What do you have set up as the default application for .html files? Or are you opening another kind of file that isn't normally/automatically associated with Firefox?
If you drag and drop the file onto a tab (which normally would replace the page there with the local file), what happens?
</blockquote>
I had tried all the suggestions. None of they helped. I can open the files by browsing for they after Firefox is open. I was able to spend some more time troubleshooting the issue yesterday afternoon. The issue has to do with the 64-bit file system. When I right click and select open with and then point it to the installation folder in the Program Files (x86) folder, it still won't open the file just opens to my home page. I did notice that when I was browsing for Firefox.exe that it defaulted to the Program Files folder not the Program Files (x86) folder. So I renamed the exe to LittleFox.exe and browsed for that exe and Firefox would then open the files as expected. So my guess is that it is a registry setting that is all the headache. I don't have time to run that problem down but will just use my workaround by renaming a copy of the exe and use that with my file association.
Thanks -
I can't get the page numbers in my table of contents to update when I update the book.
I'm using Framemaker 11 and I have two TOCs in my book: one in English and one in French. Each TOC links to different documents in the same book. The reference page for each TOC is set and correctly displays the heading 1 and 2 I've told it to display, but the numbers do not update when the content in my document files changes to a different page. I've checked the conditional text settings in my document files; they are correct. When I update the book, I choose to update Numbering, All Cross-References, All Text Insets, OLE Links, Generate Table of Contents, Lists, and Indexes. What am I doing wrong? Thanks.
I just tested this out and saw the same result as Rick - a book with child books ignores all generated files within the child books. This applies to adding content from them (e.g. their titles) to actually including them in the output. This applies to all versions of FM since v.9!
However, there is a workaround for this. You need to use the hierarchical book structure in the parent book and create Folders for each book that you want to add. Then manually add the generated files (TOC, IX, List of..., etc.) and book to the respective folder. This is what it looks like for two child books in a parent book:
Note that the child book generated files (TOC, IOR) show as just regular files at this point in the parent book. To get the page numbering to be continuous throughout the parent book, you will need to make a couple of passes. First set folder, files and books to have the Numbering continue from the previous (if you want all sequential page numbers). This will set the page numbers correctly except for what they were in the respective book TOCs. You will need to use the starting page number of the child TOC files in each folder (it shows in the Book status bar when click on the TOC file in the master/parent book).
To set the individual book TOCs to be correct in the parent book, open the child book and set the TOC Numbering to start at the page stated in the parent book (status bar). Now update the child book to set the correct (parent book) page numbers in the child TOC. [This is a necessary manual step, as the page number assigned in the parent book is ignored when th child book is individually updated and FM uses 1 to start off the sequence in the child book.] Repeat for each child book in the master/parent book.
The final step is to Update the parent book and create the PDF. You should now have all of the files included in the PDF and the child TOCs should show the correct page numbers of the master book.
This whole process of books within books seems a bit borked and one shouldn't have to be jumping through hoops to include child generated files. Please report this as a bug via: https://bugbase.adobe.com/index.cfm -
Window error when publishing Muse change, can't pubish page update
Window error when publishing Muse change, can't pubish page update. Any suggestions?
It happens after I updated my website payment page with a new Paypal html. That html is below with x's put in to the code. Why doesn't Muse or Windows like this code in Muse?
<script type="text/javascript" data-pp-pubid="9xxxxx6cec" data-pp-placementtype="540x200"> (function (d, t) {
"use strict";
var s = d.getElementsByTagName(t)[0], n = d.createElement(t);
n.src = "//paypal.adtag.where.com/merchant.js";
s.parentNode.insertBefore(n, s);
}(document, "script"));
</script>Window error when publishing Muse change, can't pubish page update. Any suggestions?
It happens after I updated my website payment page with a new Paypal html. That html is below with x's put in to the code. Why doesn't Muse or Windows like this code in Muse?
<script type="text/javascript" data-pp-pubid="9xxxxx6cec" data-pp-placementtype="540x200"> (function (d, t) {
"use strict";
var s = d.getElementsByTagName(t)[0], n = d.createElement(t);
n.src = "//paypal.adtag.where.com/merchant.js";
s.parentNode.insertBefore(n, s);
}(document, "script"));
</script> -
Automatic page updates causing problems with your screen reader? this kind of message come when i access yahoo mail.yahoo mail page not come properly.i can't chat,compose mail nothing accessing.
Try Refresh Blocker: https://addons.mozilla.org/firefox/addon/992
-
since the last update a few days ago of firefox, the time has been 25 to 35 seconds to enter bookmarks or even the time it takes to page down when it used to take a few seconds. can you tell me why it taking so long since the update on firefox. may another update is in order.
I have now done pretty much every suggestion that even vaguely applies in the various helpful link provided. Thanks for the ongoing help. =)
I have managed to get FireFox's start-up memory usage down to about 100,000K, however it appears that memory usage keeps creeping up the longer FireFox is open. (It seems to top out around 500,000K.) And I'm not talking open for many hours or days - but rather for minutes and possibly up to a couple hours. (Based on how long I've been fiddling with all this so far.)
On the plus side, it does not appear GreaseMonkey is the culprit since with it active or disabled this memory creep still occurs. Although having GreaseMonkey enabled definitely increases the rate of memory creep. Though once it has creeped up to 150,000+K, disabling GM does not make it drop back down to the starting 100,000K.
I should point out I run a MacBook Pro and use Bootcamp to partition the hard drive and run it as a Windows 7 PC about half the time. I am running it literally as a PC or, alternately, as a Mac depending on which hard drive I choose to load. (I'm not "windowing" it.) This problem exists regardless of whether I am using the PC or the Mac. These repairs have been made currently on the PC side, and I will attempt them all again on the Mac side. I find it odd that this enormous memory drain has occurred on 3 different computers at the same time. (The two "halves" of my home laptop as well as the PC at my work place.) -
I have a page that I must check each day. It is a stocks analysis page that gives advice on what to buy/sell. The page updates between 1 and 2 each day and it is very beneficial to see it right away. It is always the same page (same url) and then just update it. (There is no RSS feed on it.)
Has anyone found a way to have Safari RSS let you know when a page is updated? Or is there other means to do this with email or IM? Or maybe there is a widget that someone knows of.
Thanks for any advice....cont'd/
property theURL : "http://www.site.com/" --change as appropriate
global lastRunTime
on getPageDate()
--here I'll use curl to get the file headers
set lastMod to (do shell script "curl -I " & quoted form of theURL & " | grep Last-Modified")
--AppleScript stuff to strip out the date string
set {oldDelims, my text item delimiters} to {my text item delimiters, space}
set dateStr to text items 2 through end of lastMod as text
set my text item delimiters to oldDelims
--and turn it into a date object
set lastModDate to date dateStr
return lastModDate
end getPageDate
on run
set lastRunTime to (getGMTDate())
end run
on idle
--set the page modification date
set pageModDate to getPageDate()
--and compare the file date to the current date:
if lastRunTime < pageModDate then
display dialog theURL & " has been updated"
end if
set lastRunTime to (getGMTDate())
return 600 --check again in 10 minutes time
end <font colo -
Apps icon shows 3 update, when I tap on update it is blank page.
Apps icon shows 3 update, when I tap on update it is blank page. Already reboot my iPad and still the same. Please help. I know I can always restore it, but I don't want to loose everything I worked on. Help please:(
Hi, Sly101.
I would recommend closing any open applications in multitasking and restarting the device. If unfamiliar with multitasking, I have included a screenshot on how to process an application close. Test the results after processing these steps.
If the issue persists, see the section labeled Troubleshooting on an iPhone, iPad, or iPod touch in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H. -
Code doesn't update when uploading new files to website.
code doesn't update when uploading new files to website. I was using an old DW version for a long time then forced to upgrade when I bought my MacBook Pro. Now when I make changes to my pages and link to new files etc on my harddrive, when i upload the pages it won't image because the code still points to harddrive (this did not used to be a problem)... I manually changed the code on the web host site to point to the site and it loaded fine. But now my files on my harddrive also point to the web host files and now don't image on my computer. I never had to worry about this so far and wonder if the new version has a setting I'm supposed to be aware of so that I can design on my hardrive and upload and it knows that the files are being uploaded with it? Ugh hpe this makes sense - I'm NOT a webs designer and the new DW is way more than I use in it's technology.
Hi
This sounds like you have not defined your site in the site definition.
Follow the steps in these 2 tutorials to set-up your site locally and for the remote server -
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt6.html
PZ -
Regarding Pages charts, when I try to 'build' a 3D chart all I get is little dots but not graphics. No problems with 2D charts though. Guess my question is "Help?"
Sorry for the delay getting back to this.
Thanks to Fruhulda and Peter for their comments regarding the refusal of Pages to let me make 3D charts.
In answer to the questions put to me in this regard :
1. Pages version : Pages '09 v.4.1 (923)
2. Mac O/S : v.10.6.8
3. 3D chart : Can't find a 'name', but upright bars with rounded corners ???
4. Moved apps : Not that I'm aware of! All should be as installed off the disc.
5. A note : I have been able to create these in the past - related to a SW update?
and ... can create these charts perfectly in Keynote (go figure).
Thanks to all.
CM -
Pages crashes when opening any document on iPad 3 Latest version. I tried everything I could find on the net and finally deleted Pages from my device and reinstalled it. Still when I try to create a new document or open a document it just crashes out.
Try this:
Make sure IOS is updated to latest version
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings
Maybe you are looking for
-
Safari shuts down when trying to use bookmark or history screen
I am a Mac vigin and now had my Macbook Pro for 1 week, all was going well until the last few days when Safari keeps closing down when i look at history or bookmarks (the coverflow view?). It shuts down after about about 5 seconds or so. I have done
-
[Bug?] In Range and Coerce Comparison Mode
It seems that changing the Comparison Mode of the IR&C function with Arrays or Clusters attached does not trigger Type Propagation, or whatever is responsible for selecting the proper instance. For example, if I wire up three arrays to the inputs of
-
Mobile Safari cache - Correct page not displaying on "back"
Frequently when I am browsing a site I will 1) go to the home page, 2) tap a link to a subpage on that site and then 3) tap the back button to return to the home page. I am finding that frequently the home page will be a cached version from, usually
-
Issue Xcelsius installation Ehp1
Hi guys, We have just installed BO XI 3.1 enterprise including Xcelsius. We are in BW 7.0 SP 15 When we try to launch a BW connection from Xcelsius, we encountered an issue : error message like following appears "You need to be in version 7.02 or hig
-
Post Author: ehmd CA Forum: Migration to XI R2 I need to upgrade a Crystal Reports Server XI installation, which came with Crystal Reports Developer XI, to Crystal Reports Server XI R2. I cannot find any upgrade for Crystal Reports Server XI R2 on th