Pages Vertical Alignment
Hi,
I did some required Mac updates last night and today several of my pages documents have been altered.
- a pages template "Personal Photo Resume.template" footer (style= 'Address') has changed and is now vertical
- in addition, all my documents that use this paragraph style have changed
I don't know how this happened, and I have tried editing the original template file but nothing seems to change all the documents back to the original formatting. This is extremely frustrating. Please help if possible.
Thanks
Terence I have your file.
I am not experiencing your problem unless you mean that the text spills over into 2 lines when changed to bold. This is to be expected as bold increases the width of the text.
I think your issue may have more to do with the fact that the font is Hoefler Text which has had problems in OSX 10.6.
The Software Updates installed a bad version of the font. To avoid it it was necessary to DL the OSX 10.6.2 Combo version of the updater and install that.
See these links to resolve the problem:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=105&mforum=iworktips ntrick
http://discussions.apple.com/thread.jspa?threadID=2141021&start=15&tstart=0
Peter
Similar Messages
-
Page Vertical Alignment ?
Hi,
I'm using crystal reports 10. I want to ask a question to you. I want page Vertical Alignment from top and bottom in report page . can you help me for this, how to I do ? .
[Sample Form|http://img821.imageshack.us/img821/1533/formortalama.jpg]Oh, Sorry, You would need to figure out how many total lines you have on the report.
So... First, will all your reports only be one page?
Are you using 8.5 X 11 paper size?
If you are using 10 point font, you can assume 6 lines per inch on a report.
Assume your header and footer will take about 12 lines (Just a guess)
You should have around 66 lines (total available on 11 inch paper)
If your report is 12 lines long, and then 12 lines for header and footer,
you have 66 lines total - 6 lines for the header, and - 6 lines for the footer,
you have 54 lines available, your report is 12 lines long.
54-12 leaves you with 42 lines left over
you will need to pad 21 lines at the top, to center the output.
Now the real trick, is figuring out, how many lines the report is going to be
and subtracting that from the 54.. -
How do I vertically align paragraphs in a page?
I am new to Pages, and I've run across a problem that is really aggravating because it should not be rocket science... but it seems to be, at least for me.
I need to center the text on the page so there is equal white space above and below it.
In Word, you select File --> Page Setup --> Layout --> Vertical Alignment and choose "Center." Done.
How do you do this Pages? I've scoured the manual and online help and can find nothing on this.
Thanks in advance!Note that the Vertical Alignment does not apply to the Text Layer of a Word Processing document, just to the text in objects that accept text within the shape. For your application you would probably want to add a text box, centered on your page, to hold the text that you want to center.
Regards,
Jerry
Message was edited by: Jerrold Green1 -
BO XIR2 SP3 FP3.3 - vertical alignment of 1st column of 2nd page ignored
We have webi reports that have all cells set to vertical alignment bottom. If the report spans more than one page, the first column of the second page reverts to vertical alignment center for all cells in the column. All other columns remain with bottom vertical alignment. This problem does not occur in PDF view, only in HTML views. Does anyone know if there is a fix for this? Can I modify a file somewhere in the system to fix a missing vertical alignment tag?
Joe Gottschall
Pixstar, Inc.Yes, there is "sort-of":
Object > Text Frame Options ( Ctrl + B )
Vertical Justification, set Align to "Justify".
It won't distribute evenly across all three columns though... in other words InDesign doesn't balance the text across the three columns with this feature.
Instead it pushes space between lines/paragraphs within each column to ensure the top and bottom line of text in each column are lined up with top and bottom of text frame.
If there is only a little bit of text in the last column, things might not look like you anticipated. -
Vertical align page html snippet
hi
Does anyone have example of html code for vertically aligned content in iweb?Cyclosaurus is not always complete with his instructions.
I don't do tutorial, therefore there is no instruction.
my examples work, which means the code is good.
you will have to decode my iweb pages, my codes and my methods. (same apply to apple sw guys)
i saw this page (http://temp.cyclosaurus.com/VerticalCenterPage/ShortPage.html), but i could not aquire necessary code... but it does not work
because the code won't work when inserted using html snippet, it only works when directly inserted on the page.
/ShortPagefiles/widget0CustomCode.html
that's where my widget CustomCode does the work.
give them feedback: http://www.apple.com/feedback/iweb.html
and ask for tools to build widgets. -
Vertical alignment when the page content footnotes
I need this script:
Search footnotes in a document, and in these pages with footnotes change the vertical alignment to top...
Thanks.... (And sorry for my not good english !!!)(Not sure I've understood the goal.)
Maybe you need something like this:
var tfs = app.activeDocument.textFrames.everyItem().getElements(),
tf;
while( tf=tfs.pop() )
if ( tf.footnotes.length )
tf.textFramePreferences.verticalJustification = VerticalJustification.TOP_ALIGN;
@+
Marc -
How can I vertically align items that are in different regions
Hello,
I am a novice developer in APEX. I am creating a page which has 4 regions on it. Right now it looks like the following:
----region 1----------------------
label: field label4: field
-----region 2--- region 3--
label: field label45: field
-----region 4---------------------
label:field [one-item-worth-of-space. next item aligned to right of item below]long_label: field
label: field label: field
I am trying to vertically align the items in these regions, in such a way that all the colons are vertically aligned.
I am having a particular alignment problem in region 4, column 2 (item are bold). Both label:field, and long_label:field in region 4 have the same vertical/horizontal alignment option as the rest of the region (right for label, left for field). For some reason, there is one item space between these two items. This space is removed if I switch the two fields.
I would really appreciate any help trying to understand
- how to remove the one-item-equivalent space between two items in region 4
- how to vertically align all these fields in different regions on one page.
I tried to create the original scenario in bold, but the post would not allow space formatting. I apologise if it is difficult to understand
Thank you in advance for your time.
RHaqThis is not the APEX forum. Post your question in this forum:
Oracle Application Express (APEX) -
Vertical align to center in a div
Hi,
I'm putting together a css layout in dreamweaver CS3, i have a basic nav bar with a solid black colour with text on top. I'm trying to vertical align the text to the center, currently it's center horizontally, but the text is right at the top of the div. The only way i've been able to change the position is to use "line height"
Any there any easy way to do this in css?
Any help is much appreciated, thanks.Hi again,
I'm having a bit of trouble trying to get my main text area vertically center on one of my pages, i have a two column layout(text area on the right). The above methods don't seem to work, they just seem expand my whole bodyArea downwards.
Currently my codes look like this:
Layout:
<style type="text/css">
<!--
body {
background-color: #666666;
#wrapper #bodyArea #left {
background-image: url(images/picture.jpg);
float: left;
background-repeat: no-repeat
-->
</style></head>
<body>
<div id="wrapper">
<div id="logo"></div>
<div id="nav"><a href= nav text here </a></div>
<div id="bodyArea">
<div id="left"></div>
<div id="shadow"></div>
<div id="right">text with paragraphs here</div>
<div id="footer">copyright info here</div>
</div>
</div>
</body>
</html>
stylesheet:
#wrapper {
width: 781px;
margin-right: auto;
margin-left: auto;
height: 699px;
#wrapper #logo {
height: 116px;
background-image: url(../images/logo.jpg);
#wrapper #nav {
height: 38px;
text-align: center;
color: #FFFFFF;
font-family: "Courier New", Courier, monospace;
font-size: 19px;
line-height: 38px;
background-repeat: no-repeat;
background-color: #000000;
margin: 0px;
#wrapper #bodyArea #left {
width: 341px;
float: left;
height: 507px;
#wrapper #bodyArea #right {
width: 440px;
float: right;
height: 507px;
text-align: center;
color: #000000;
vertical-align: middle;
font-family: Arial, Helvetica, sans-serif;
font-size: 16px;
#wrapper #bodyArea #right #shadow {
height: 14px;
background-image: url(../images/shadow.gif);
background-repeat: repeat-x;
#wrapper #bodyArea #footer {
height: 38px;
clear: both;
text-align: center;
color: #FFFFFF;
background-color: #000000;
font-family: Arial, Helvetica, sans-serif;
font-size: 15px;
line-height: 38px;
margin: 0px;
p {
margin-top: 0px;
margin-right: 10px;
margin-bottom: 15px;
margin-left: 10px;
I'm fairly new to CSS layouts, if anyone could help me it would be much appreciated, thanks. -
I cant figure out why the valign isnt working on my page..
http://www.v4.skiingbc.info/pages/skiarea2.php?Name=Test1212&TrailMaps=X&FS=√&LP=√
CSS Sheet:
http://v4.skiingbc.info/v4.css
I want all text to be middle aligned in the table cells... If
someone could take a look at the code that would be really
appreciated..
In Dreamweaver the text is middle aligned, it just doesnt
work in IE7You have this on the page:
<td height="79"
<valign="top">
try changing it to thos:
<td height="79" valign="top">
you also have this:
<option selected="selected">Select Card
Type</option>
option selected>Search By Card Type
</option>
make it like this:
<option selected="selected">Select Card
Type</option>
Ken Ford
Adobe Community Expert
Fordwebs, LLC
http://www.fordwebs.com
"Monica101" <[email protected]> wrote in
message news:f0foos$n7u$[email protected]..
> I've got text in a table that won't align at the top:
>
> <td height="79"valign="top"><table width="150"
border="0" cellpadding="0"
> cellspacing="0" class="Side_Links">
>
> It looks fine in Dreamweaver, but displays verticaly in
the center of the
> table. I've been working in Dreamweaver for years and
never had this problem. I
> tried fixing it w/ css:
>
> vertical-align: top;
>
> This didn't work either.
>
> Page:
>
>
http://www.capitalinternet.com/~mycredit/template.php
>
> Thanks!
>
> -
Vertical Alignment in table columns
Using JHeadstart 10.1.3.4.
Different display types are differently positioned in table columns. Single text seems vertically centered; text fields with multiple lines are vertically aligned at the top of a table column; vertical radio buttons are vertically aligned at the bottom of a table column. The resulting display is quite messy.
I have not found any formating option in JHeadStart that allows for controlling vertical alignment. Am I a missing something?
If JHeadStart 10g does not support controlling vertical alignment directly, how should this be handled? Does JHeadStart 11g add such vertical alignment support?Hello,
If you need anything special considering vertical alignment in tables, you can simply perform that in the resulting JSPX page. In other words, just alter the JSPX file to whatever you need.
Save your customizations in JHeadstart using velocity templates, so your page is regenerateable while keeping your changes. See the JHeadstart Developers Guide on how to change such customizations in the templates.
Also in release 11 there is no vertical alignment (yet); I suppose because for most tables, each row just has a single line and vertical alignment is therefore not needed. However, I have put it on the wish-list, so we will check on it later. Thanks!
Regards,
Evert-Jan de Bruin
JHeadstart Team -
Basic questions about word spacing and vertical alignment with CSS
I'm sill very new to Dreamweaver and web page designing. I've
read the entire manual SC3, one book, and starting another but I
have almost 0 practice.
Q1. so far I haven't been able to produce the effect of the
Word Spacing property. I tried all kinds of tests and I don't know
in what scenario this effect will show. Can someone give me a
simple example that shows the effect of this CSS property.
Q2. Vertical Alignment: this works well with images inserted
into text but I also expected this to work with text against other
text. For example I typed TEST© and assigned a different SCC
style to the © so that I can make it smaller and put it up
with the Vertical Alignment property. Surprisingly this propery
didn't produce any effect. How is htis suppose to be done?> This is some text. This is some text.
You forgot to wrap your text in <p> tags so the style
rule you created
doesn't apply.
Walt
"emil emil" <[email protected]> wrote in
message
news:[email protected]...
>
quote:
Originally posted by:
Newsgroup User
> i don't know about Q1. but for Q2. just delete what you
already have for
> the copyright symbol, and then insert the copyright
special character.
> there's a couple ways to do it: on the main menu at the
top of the
> window, go to Insert, then HTML, then Special
Characters, and select
> Copyright. or you can also find it in the Insert panel,
which is below
> the menu, under Text. ...
>
>
> Thanks courtney, but that was exactly the way I created
the © character
> and
> like in this text here it needs to be scaled down and
moved up
> independently
> from the surrounding text. Can someone please post a
simple code showing
> the
> effect of the vertical alignment of text in relation to
surrounding text.
>
>
>
quote:
Originally posted by:
Newsgroup User
> Q1
>
> <html>
> <head>
> <style type="text/css">
> p
> {
> word-spacing: 30px
> }
> </style>
> </head>
> <body>
>
> <p>
> This is some text. This is some text.
> </p>
>
> </body>
> </html>
>
>
> Thank you Ken, your code works but not the code
generated from
> Dreamweaver
> when I type in the Design View and assing CSS style to
the p tag. Does
> Dreamweaver have trouble generating properly working
HTML or I'm missing
> something here? Here is the code that Dreamweaver
generates and the word
> spacing doesn't work with it.
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
> <title>Untitled Document</title>
> <style type="text/css">
> <!--
> p {
> word-spacing: 50em;
> }
> -->
> </style>
> </head>
>
> <body>
> This is some text. This is some text.
> </body>
> </html>
>
>
> -
I know how to set vertical alignment in a Microsoft Word document.
I have been unable to find out how to do the same thing in Pages '08.
I know it has to be there because if I open a document in Pages that was created with Microsoft Word that has vertical alignment set to center it is recognized by Pages.
Any suggestions??
PeterI do not think it is available through the UI. The way to add vertical alignment to a page is to copy a page from a converted Word document and paste it to your Pages document.
It does not seem like Pages XML is currently fully documented, even though it has been claimed to be. I thought it would be here but that is not for the current version, and it is incomplete.
I would guess it is this kind of information:
<pre>
<sf:verticalAlignment>
<sf:number sfa:number="1" sfa:type="i"/>
</sf:verticalAlignment>
</pre>
However, searching Apple's developer connection gives no confirmation. -
Vertical Alignment and Loading
Two questions. I've just uploaded a client's site as a
sub-folder of my own in order to test it out.
www.rebeccapike.co.uk/home.html
I want to know how to center the page horizontally having
used <div> tags and placed everything within a base layer.
I'm sure this is done in the properties inspector somewhere but I
can't work it out.
Secondly, some of the pages don't seem to be loading when you
link to them. For example if you go to the main menu
(www.rebeccapike.co.uk/menu.html) and click the "photographie"
link, the page only seems to load after clicking refresh a few
times... could someone tell me why?
Thanks very much in advance.
RebeccaOkay - you're really not making much sense here. Your subject
reads
"Vertical Alignment and Loading" and yet you're asking about
horizontal
alignment, so - which is it?
Horizontal: <div style="margin: 0 auto">...</div>
Vertical + Horizontal:
http://www.apptools.com/examples/tableheight.php
Also - I have no problems loading the "Photographie" link in
both Firefox
1.5.04 and IE6 on Windows XP - they both load instantly with
one click.
BTW: That is an incorrect spelling of the word, photography -
but I assumed
or *hoped* you already knew that.
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Proud GAWDS Member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"rfkarchitects" <[email protected]> wrote in
message
news:e5psma$ae8$[email protected]..
> Two questions. I've just uploaded a client's site as a
sub-folder of my
> own in
> order to test it out.
>
> www.rebeccapike.co.uk/home.html
>
> I want to know how to center the page horizontally
having used <div> tags
> and
> placed everything within a base layer. I'm sure this is
done in the
> properties
> inspector somewhere but I can't work it out.
>
> Secondly, some of the pages don't seem to be loading
when you link to
> them.
> For example if you go to the main menu
(www.rebeccapike.co.uk/menu.html)
> and
> click the "photographie" link, the page only seems to
load after clicking
> refresh a few times... could someone tell me why?
>
> Thanks very much in advance.
>
> Rebecca
> -
Vertical alignment in a cell and IE
In this page www.gk-developers.com, on IE, the navigation
menu is showing up midway along the page when it should be right at
the top. The table cell has the vertical align instruction but IE
seems to ignore it. What gives?
Mario.Bonnie wrote:
> Cipr?s wrote:
>
>> Hello there, and hope you are having a good day...
>>
>>
http://gk-developers.com
>>
>> I am developing this page with a Project Seven menu
and the cell that
>> is holding the menu has the following code
>>
>> IE 7 and 6 is ignoring the "vertical alignement
top". Would
>> appreciate any help that can be given.
>
> Mario,
>
> I recommend you post this question on the project seven
support forums.
> But I can tell you now that Al will say you should not
be using IE7 on
> a production machine, as it's still in beta (I would add
I consider any
> new version of IE to be in beta, even when it's, er,
not).
>
there's one thing that all browsers support:
<td valign="top">
(or bottom or middle)
the css vertical-align is not reliable.
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing List -
Im having problem with getting text and object to vertical align in div's.
I cnat get them to position as i want them without position them with either margin/padding og using absolute position...
Anny advise ??Hi Murray
Still working hard on the page so the page looks very unfinish, but here it is
http://home19.inet.tele.dk/jgom/js/
If you look at the logo-head part
<div id="logohead">
<div><img src="graphic/JS-logo-35x210.gif" alt="" width="210" height="35" class="logo" /></div>Kvalitet Service Garenti
</div>
i woud like the payoff "Kvalitet Service Garenti" to be vertical align in the logohead div
the only way i have found to do this is to set the line height to be the hight i want the div to be (55px)
What i realy woud like is to ba able to vertical align the payoff (and the logo) without using linehieght and/or padding/margin
Maybe you are looking for
-
TO_DATE Function Is not working
Hi Friends, select * from view_date where to_date(my_date) between '01-dec-06' and '31-dec-06'; This query is not responding... I have the the date field in character in the view so i need to convert it to date ,so that iam using to_date function and
-
WHY Price is not defaulted from inforecord in a P.O with material group.
When i tried to create P O for a material group & i mentioned material text, Price was not defaulted in PO from inforecord unless i mention inforecord number even if i mentioned vendor & valid inforecord is exist for the same material group & vendor
-
Use of Data Flow in the Action Box
Hi Guys Can any body explain the use of Data Flow in the action box? If anybody have the doc. mail to [email protected] It would be more useful if anybody expalin it with an example? Thanks
-
DB CONNECT support Hyperion database(Essbase)
Hi, Does DB CONNECT support Hyperion database(Essbase) for SAP BW 3.5/7.0. Regards CSM Reddy
-
I have enough room but everytime i hit install my phone keeps saying its unable to update