Pages-when using template for envelopes can you import names/address from address book

When using templates for envelopes can you import names/address from the address book?

Drag the VCard from Address Book onto the open envelope template.
If you want mutiple addresses make a Group of those in Address Book and drag the Group icon onto the Pages template.
Peter

Similar Messages

  • Can you import video directly from a video camera ?

    Can you import video directly from a video camera to the iPad 2 ? If so, what is needed?

    I would say no. I have an Ipad2 with the connection kit. A recent Sony camera which works fine in imovie for my 27" imac, but nothing with the Ipad. Only thing that it finds are pictures that can be made with the same video camera. Apple wrote a note aboit probkmes with importing, but i'm very disappointed with what i have right now.
    http://support.apple.com/kb/TS3719

  • Can you import movie videos from SD camera card

    Can you import movie videos (MP4) into an Ipad from an SD camera card on a Lightning cable ... or can you only do this from a laptop via Itunes? In other words, is Itunes the only way to get non-Itune videos to the Ipad? Hope I havent made this sound confusing.

    To import the videos must follow a very strict naming convention.
    All file names must have 8 characters for a name and be located in a folder named DCIM
    for example
    DCIM
    MOV_5789.mp4
    You can't watch the videos off the cart, they must be imported into the iPad. They'll go into the camera roll, when you tap on them it'll open the video app and you can watch from there.

  • Using Dashcode for iBooks-can you create custom links?

    i'd like make an iBook where I have a Table of Contents that links to specific pages, does anyone know if I can accomplish this through Dashcode and importing the file(s) into the iBooks author?

    ...ehhh....are you writing a blog, then?
    I'd think the first thing you'd do otherwise is use the software you're asking about. Can't help you write a blog, sorry.
    iBA is a free download. Install it and check it out. I'll wait...
    See: Publishing With iBooks Author
    http://shop.oreilly.com/product/0636920025597.do 

  • Can you import the video from an AVCHD Disc into FCP7  for editing?

    Can the video from an AVCHD Disc be imported into FCP 7 for re-editing if you have a normal Superdrive burner?
    The reason I ask is because last night our film-making club gave a show of short videos to some guests.
    At the end it was decided to put them all on one DVD to send to the visitors as a memento.
    However, some of the films were on AVCHD discs and I queried whether they could be copied, even in standard definition.
    The "copier" said it was no problem as he had a PC and had done it before . . . . . cheeky devil!
    So can it be done . . . . . on a PC or a Mac . . . . with a standard burner?
    I have just tried but nothing in the BDMV folder can be imported.

    GOT IT!
    Copy the BDMV folder from the AVCHD disc to the desktop.
    Use HandBrake to convert the .m2ts files to H.264
    Then convert the H.264 files to an editable format.
    Rather convoluted process but it works.
    Anyone know a better method?

  • Can you import one TOC from one project to another? (RH9)

    I have been working on a complicated project in RH9. (all work done in RH)
    I made all the modifications to the htm files that I needed.
    I went to rename the .htt file and upon entry, RH 9 CRASHED!
    When I reopened, my TOC was entirely GONE!
    Luckily, I made a backup of the entire directory a few hours ago.
    Options:
    A.) Revert to backup and redo hours of work (not what I want to do).
    B.) Somehow import the TOC from the backup to the new project.
    I hope this is a dumb question and very easy to do. It is a VERY complex TOC (prints out to 11 pages) so I do not want to redo from scratch.
    I await all of your expert advice.
    Thank you so much!
    DianaJ

    Hi,
    To import a TOC into existing project you may follow the steps as below:
    1. Go to Project Manager POD and expand the TOC folder
    2. Click New TOC in the Right Click Menu
    3. Give the desired name to the TOC you want
    4. Check the checkbox "Copy existing Table of Contents" and browse to the TOC file that you want to import
    5. Click OK and all contents of the TOC should be imported.
    I hope it works
    Thanks

  • Can you Import a dump from 8.0.5 into 9i?

    We are currently running version 8.0.5 and are trying to find the best way to upgrade to 9i. I've read that you can import a dump from 8i into 9i, but does anyone know if you can do the same for 8.0.5?
    Thanks

    hi,
    you want migrate database through import or export utility.
    check below link
    http://download-uk.oracle.com/docs/cd/A91202_01/901_doc/server.901/a90191/migeximp.htm#910881
    regards
    Taj

  • Can you import iTunes playlists from iPod?

    I have moved my iTunes library off my computer and onto an external hard drive and somehow in the process have lost my playlist.  (I didn't do a good job of moving over, had to basically download everything back from the cloud).  So my music is all there but not my playlists.  If I have my playlists on an iPod, can I import them into my new iTunes library from my iPod?  If I plug in my iPod will it sync with library and will I lose all my playlists??

    umm

  • Problem when using template for new database (ora10g)

    Hi all,
    I've done this a few times now, on different servers weeks apart.
    I have an Oracle 10g install on a Windows Server 2003 box, and I have run the database configuration assistant to create a database. We will have several databases with the exact same setup when I move Oracle 10g to a production environment. I created the database exactly as I need it the first time round, then I save it as a template to use for the next ones. However, when I run the template I get the following error:
    ORA-01501: CREATE DATABASE failed
    ORA-09314: sltln: error translating logical name
    Whats driving me nuts is, if I just go ahead and retype everything back in the same as the last database it works fine, just seems to be the template which is messing me up.
    Heres the template I'm trying to use (hope just pasting it like this is ok.. if not, please some mod remove it and I'll attach it)
    Thanks!
    <DatabaseTemplate name="DCnn" description="" version="10.1.0.2.0">
    <CommonAttributes>
    <option name="ISEARCH" value="false"/>
    <option name="OMS" value="false"/>
    <option name="JSERVER" value="false"/>
    <option name="SPATIAL" value="false"/>
    <option name="ODM" value="false">
    <tablespace id="SYSAUX"/>
    </option>
    <option name="IMEDIA" value="false"/>
    <option name="XDB_PROTOCOLS" value="false">
    <tablespace id="SYSAUX"/>
    </option>
    <option name="ORACLE_TEXT" value="false">
    <tablespace id="SYSAUX"/>
    </option>
    <option name="SAMPLE_SCHEMA" value="false"/>
    <option name="CWMLITE" value="false">
    <tablespace id="SYSAUX"/>
    </option>
    <option name="EM_REPOSITORY" value="true">
    <tablespace id="SYSAUX"/>
    </option>
    </CommonAttributes>
    <Variables/>
    <CustomScripts Execute="false"/>
    <InitParamAttributes>
    <InitParams>
    <initParam name="O7_DICTIONARY_ACCESSIBILITY" value="TRUE"/>
    <initParam name="aq_tm_processes" value="1"/>
    <initParam name="background_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\bdump"/>
    <initParam name="compatible" value="10.1.0.2.0"/>
    <initParam name="core_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\cdump"/>
    <initParam name="db_block_size" value="8" unit="KB"/>
    <initParam name="db_cache_size" value="24" unit="MB"/>
    <initParam name="db_create_file_dest" value="E:\Oradata"/>
    <initParam name="db_create_online_log_dest_1" value="C:\Oradata"/>
    <initParam name="db_create_online_log_dest_2" value="D:\Oradata"/>
    <initParam name="db_create_online_log_dest_3" value="E:\Oradata"/>
    <initParam name="db_domain" value="JACOBSONCO.COM"/>
    <initParam name="db_file_multiblock_read_count" value="16"/>
    <initParam name="db_name" value="SDC7"/>
    <initParam name="db_recovery_file_dest" value="E:\Oradata\flash_recovery_area"/>
    <initParam name="db_recovery_file_dest_size" value="2048" unit="MB"/>
    <initParam name="fast_start_mttr_target" value="300"/>
    <initParam name="java_pool_size" value="0" unit="MB"/>
    <initParam name="job_queue_processes" value="10"/>
    <initParam name="large_pool_size" value="8" unit="MB"/>
    <initParam name="open_cursors" value="1000"/>
    <initParam name="pga_aggregate_target" value="24" unit="MB"/>
    <initParam name="processes" value="150"/>
    <initParam name="query_rewrite_enabled" value="FALSE"/>
    <initParam name="remote_login_passwordfile" value="EXCLUSIVE"/>
    <initParam name="shared_pool_size" value="80" unit="MB"/>
    <initParam name="sort_area_size" value="524288"/>
    <initParam name="undo_management" value="AUTO"/>
    <initParam name="undo_retention" value="10800"/>
    <initParam name="undo_tablespace" value="UNDOTBS1"/>
    <initParam name="user_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\udump"/>
    <initParam name="utl_file_dir" value="D:\FileTransfers\Triggers"/>
    </InitParams>
    <MiscParams>
    <databaseType>MULTIPURPOSE</databaseType>
    <maxUserConn>20</maxUserConn>
    <percentageMemTOSGA>40</percentageMemTOSGA>
    <customSGA>true</customSGA>
    <characterSet>WE8MSWIN1252</characterSet>
    <nationalCharacterSet>AL16UTF16</nationalCharacterSet>
    <archiveLogMode>false</archiveLogMode>
    <initParamFileName>{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\pfile\init.ora</initParamFileName>
    </MiscParams>
    <SPfile useSPFile="true">{ORACLE_HOME}\database\spfile{SID}.ora</SPfile>
    </InitParamAttributes>
    <StorageAttributes>
    <ControlfileAttributes id="Controlfile">
    <maxDatafiles>100</maxDatafiles>
    <maxLogfiles>16</maxLogfiles>
    <maxLogMembers>3</maxLogMembers>
    <maxLogHistory>1</maxLogHistory>
    <maxInstances>8</maxInstances>
    <image name="<OMF_CONTROL_0>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
    <image name="<OMF_CONTROL_1>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
    <image name="<OMF_CONTROL_2>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
    </ControlfileAttributes>
    <DatafileAttributes id="<OMF_DEKINS_DATAFILE_0>">
    <tablespace>DEKINS</tablespace>
    <temporary>false</temporary>
    <online>true</online>
    <status>0</status>
    <size unit="MB">500</size>
    <reuse>false</reuse>
    <autoExtend>false</autoExtend>
    <increment unit="KB">-2</increment>
    <maxSize unit="KB">-1</maxSize>
    </DatafileAttributes>
    <DatafileAttributes id="<OMF_INDEX_DATA_DATAFILE_0>">
    <tablespace>INDEX_DATA</tablespace>
    <temporary>false</temporary>
    <online>true</online>
    <status>0</status>
    <size unit="MB">500</size>
    <reuse>false</reuse>
    <autoExtend>false</autoExtend>
    <increment unit="KB">-2</increment>
    <maxSize unit="KB">-1</maxSize>
    </DatafileAttributes>
    <DatafileAttributes id="<OMF_SYSAUX_DATAFILE_0>">
    <tablespace>SYSAUX</tablespace>
    <temporary>false</temporary>
    <online>true</online>
    <status>0</status>
    <size unit="MB">120</size>
    <reuse>true</reuse>
    <autoExtend>true</autoExtend>
    <increment unit="KB">10240</increment>
    <maxSize unit="MB">-1</maxSize>
    </DatafileAttributes>
    <DatafileAttributes id="<OMF_SYSTEM_DATAFILE_0>">
    <tablespace>SYSTEM</tablespace>
    <temporary>false</temporary>
    <online>true</online>
    <status>0</status>
    <size unit="MB">300</size>
    <reuse>true</reuse>
    <autoExtend>true</autoExtend>
    <increment unit="KB">10240</increment>
    <maxSize unit="MB">-1</maxSize>
    </DatafileAttributes>
    <DatafileAttributes id="<OMF_TEMP_DATAFILE_0>">
    <tablespace>TEMPORARY_DATA</tablespace>
    <temporary>false</temporary>
    <online>true</online>
    <status>0</status>
    <size unit="MB">200</size>
    <reuse>true</reuse>
    <autoExtend>true</autoExtend>
    <increment unit="KB">640</increment>
    <maxSize unit="MB">-1</maxSize>
    </DatafileAttributes>
    <DatafileAttributes id="<OMF_UNDOTBS1_DATAFILE_0>">
    <tablespace>UNDOTBS1</tablespace>
    <temporary>false</temporary>
    <online>true</online>
    <status>0</status>
    <size unit="MB">200</size>
    <reuse>true</reuse>
    <autoExtend>true</autoExtend>
    <increment unit="KB">5120</increment>
    <maxSize unit="MB">-1</maxSize>
    </DatafileAttributes>
    <DatafileAttributes id="<OMF_USERS_DATAFILE_0>">
    <tablespace>USER_DATA</tablespace>
    <temporary>false</temporary>
    <online>true</online>
    <status>0</status>
    <size unit="MB">50</size>
    <reuse>true</reuse>
    <autoExtend>true</autoExtend>
    <increment unit="KB">1280</increment>
    <maxSize unit="MB">-1</maxSize>
    </DatafileAttributes>
    <TablespaceAttributes id="DEKINS">
    <online>true</online>
    <offlineMode>1</offlineMode>
    <readOnly>false</readOnly>
    <temporary>false</temporary>
    <defaultTemp>false</defaultTemp>
    <undo>false</undo>
    <local>true</local>
    <blockSize>-1</blockSize>
    <allocation>1</allocation>
    <uniAllocSize unit="KB">-1</uniAllocSize>
    <initSize unit="KB">-1</initSize>
    <increment unit="KB">-1</increment>
    <incrementPercent>-1</incrementPercent>
    <minExtends>-1</minExtends>
    <maxExtends>-2</maxExtends>
    <minExtendsSize unit="KB">-1</minExtendsSize>
    <logging>true</logging>
    <recoverable>false</recoverable>
    <maxFreeSpace>0</maxFreeSpace>
    <autoSegmentMgmt>true</autoSegmentMgmt>
    <datafilesList>
    <TablespaceDatafileAttributes id="<OMF_DEKINS_DATAFILE_0>">
    <id>1</id>
    </TablespaceDatafileAttributes>
    </datafilesList>
    </TablespaceAttributes>
    <TablespaceAttributes id="INDEX_DATA">
    <online>true</online>
    <offlineMode>1</offlineMode>
    <readOnly>false</readOnly>
    <temporary>false</temporary>
    <defaultTemp>false</defaultTemp>
    <undo>false</undo>
    <local>true</local>
    <blockSize>-1</blockSize>
    <allocation>1</allocation>
    <uniAllocSize unit="KB">-1</uniAllocSize>
    <initSize unit="KB">-1</initSize>
    <increment unit="KB">-1</increment>
    <incrementPercent>-1</incrementPercent>
    <minExtends>-1</minExtends>
    <maxExtends>-2</maxExtends>
    <minExtendsSize unit="KB">-1</minExtendsSize>
    <logging>true</logging>
    <recoverable>false</recoverable>
    <maxFreeSpace>0</maxFreeSpace>
    <autoSegmentMgmt>true</autoSegmentMgmt>
    <datafilesList>
    <TablespaceDatafileAttributes id="<OMF_INDEX_DATA_DATAFILE_0>">
    <id>1</id>
    </TablespaceDatafileAttributes>
    </datafilesList>
    </TablespaceAttributes>
    <TablespaceAttributes id="SYSAUX">
    <online>true</online>
    <offlineMode>1</offlineMode>
    <readOnly>false</readOnly>
    <temporary>false</temporary>
    <defaultTemp>false</defaultTemp>
    <undo>false</undo>
    <local>true</local>
    <blockSize>-1</blockSize>
    <allocation>1</allocation>
    <uniAllocSize unit="KB">-1</uniAllocSize>
    <initSize unit="KB">64</initSize>
    <increment unit="KB">64</increment>
    <incrementPercent>50</incrementPercent>
    <minExtends>1</minExtends>
    <maxExtends>4096</maxExtends>
    <minExtendsSize unit="KB">64</minExtendsSize>
    <logging>true</logging>
    <recoverable>false</recoverable>
    <maxFreeSpace>0</maxFreeSpace>
    <autoSegmentMgmt>true</autoSegmentMgmt>
    <datafilesList>
    <TablespaceDatafileAttributes id="<OMF_SYSAUX_DATAFILE_0>">
    <id>-1</id>
    </TablespaceDatafileAttributes>
    </datafilesList>
    </TablespaceAttributes>
    <TablespaceAttributes id="SYSTEM">
    <online>true</online>
    <offlineMode>1</offlineMode>
    <readOnly>false</readOnly>
    <temporary>false</temporary>
    <defaultTemp>false</defaultTemp>
    <undo>false</undo>
    <local>true</local>
    <blockSize>-1</blockSize>
    <allocation>3</allocation>
    <uniAllocSize unit="KB">-1</uniAllocSize>
    <initSize unit="KB">64</initSize>
    <increment unit="KB">64</increment>
    <incrementPercent>50</incrementPercent>
    <minExtends>1</minExtends>
    <maxExtends>-1</maxExtends>
    <minExtendsSize unit="KB">64</minExtendsSize>
    <logging>true</logging>
    <recoverable>false</recoverable>
    <maxFreeSpace>0</maxFreeSpace>
    <autoSegmentMgmt>true</autoSegmentMgmt>
    <datafilesList>
    <TablespaceDatafileAttributes id="<OMF_SYSTEM_DATAFILE_0>">
    <id>-1</id>
    </TablespaceDatafileAttributes>
    </datafilesList>
    </TablespaceAttributes>
    <TablespaceAttributes id="TEMPORARY_DATA">
    <online>true</online>
    <offlineMode>1</offlineMode>
    <readOnly>false</readOnly>
    <temporary>true</temporary>
    <defaultTemp>true</defaultTemp>
    <undo>false</undo>
    <local>true</local>
    <blockSize>-1</blockSize>
    <allocation>1</allocation>
    <uniAllocSize unit="KB">-1</uniAllocSize>
    <initSize unit="KB">64</initSize>
    <increment unit="KB">64</increment>
    <incrementPercent>0</incrementPercent>
    <minExtends>1</minExtends>
    <maxExtends>0</maxExtends>
    <minExtendsSize unit="KB">64</minExtendsSize>
    <logging>true</logging>
    <recoverable>false</recoverable>
    <maxFreeSpace>0</maxFreeSpace>
    <autoSegmentMgmt>true</autoSegmentMgmt>
    <datafilesList>
    <TablespaceDatafileAttributes id="<OMF_TEMP_DATAFILE_0>">
    <id>-1</id>
    </TablespaceDatafileAttributes>
    </datafilesList>
    </TablespaceAttributes>
    <TablespaceAttributes id="UNDOTBS1">
    <online>true</online>
    <offlineMode>1</offlineMode>
    <readOnly>false</readOnly>
    <temporary>false</temporary>
    <defaultTemp>false</defaultTemp>
    <undo>true</undo>
    <local>true</local>
    <blockSize>-1</blockSize>
    <allocation>1</allocation>
    <uniAllocSize unit="KB">-1</uniAllocSize>
    <initSize unit="KB">512</initSize>
    <increment unit="KB">512</increment>
    <incrementPercent>50</incrementPercent>
    <minExtends>8</minExtends>
    <maxExtends>4096</maxExtends>
    <minExtendsSize unit="KB">512</minExtendsSize>
    <logging>true</logging>
    <recoverable>false</recoverable>
    <maxFreeSpace>0</maxFreeSpace>
    <autoSegmentMgmt>true</autoSegmentMgmt>
    <datafilesList>
    <TablespaceDatafileAttributes id="<OMF_UNDOTBS1_DATAFILE_0>">
    <id>-1</id>
    </TablespaceDatafileAttributes>
    </datafilesList>
    </TablespaceAttributes>
    <TablespaceAttributes id="USER_DATA">
    <online>true</online>
    <offlineMode>1</offlineMode>
    <readOnly>false</readOnly>
    <temporary>false</temporary>
    <defaultTemp>false</defaultTemp>
    <undo>false</undo>
    <local>true</local>
    <blockSize>-1</blockSize>
    <allocation>1</allocation>
    <uniAllocSize unit="KB">-1</uniAllocSize>
    <initSize unit="KB">128</initSize>
    <increment unit="KB">128</increment>
    <incrementPercent>0</incrementPercent>
    <minExtends>1</minExtends>
    <maxExtends>4096</maxExtends>
    <minExtendsSize unit="KB">128</minExtendsSize>
    <logging>true</logging>
    <recoverable>false</recoverable>
    <maxFreeSpace>0</maxFreeSpace>
    <autoSegmentMgmt>true</autoSegmentMgmt>
    <datafilesList>
    <TablespaceDatafileAttributes id="<OMF_USERS_DATAFILE_0>">
    <id>-1</id>
    </TablespaceDatafileAttributes>
    </datafilesList>
    </TablespaceAttributes>
    <RedoLogGroupAttributes id="1">
    <reuse>false</reuse>
    <fileSize unit="KB">10240</fileSize>
    <Thread>1</Thread>
    <member ordinal="0" memberName="OMF_1_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
    </RedoLogGroupAttributes>
    <RedoLogGroupAttributes id="2">
    <reuse>false</reuse>
    <fileSize unit="KB">10240</fileSize>
    <Thread>1</Thread>
    <member ordinal="0" memberName="OMF_2_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
    </RedoLogGroupAttributes>
    <RedoLogGroupAttributes id="3">
    <reuse>false</reuse>
    <fileSize unit="KB">10240</fileSize>
    <Thread>1</Thread>
    <member ordinal="0" memberName="OMF_3_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
    </RedoLogGroupAttributes>
    </StorageAttributes>
    </DatabaseTemplate>

    You may need to look into this?
    ORA-09314: sltln: error translating logical name
    Cause: Internal buffer may have overflowed
    Action: See OSD error accompanying this message

  • Can you import a master from one Muse file to another?

    I've got upload space through Comcast, and my homepage and other material are there.  (home.comcast.net/~gregfisk/)
    But I have another site that I uploaded there through Dreamweaver a year ago.  I'd like to update it with Muse.  (www.caption-ator.com)
    But the thing with Muse is, when it exports a site to HTML, it defualts the home page to 'index.html'.  In this case, the caption-ator site info (made with muse) would over-write my main web page.  The same goes for any files that share the same file name, like 'site global.css', and 'sitemap.xml'.
    So I guess I should take the site info from the caption-ator Muse file, and rebuild it in my personal web page. So there will (theoretically) be no conflicts in the file names, and can all be uploaded safely.
    Rather than rebuild the whole Caption-ator muse built site in the Muse file for my personal web  page - is there any way to take a Master page from one Muse file, and import it to another?  That would be a HUGE time saver.  My first instinct would be to take the Muse tab for my personal web page, and the Muse tab for the Caption-ator web page, then drag and drop the Master from the Caption-ator page to the personal web page.  But Muse doesn't seem to allow for tabs to be kept separate like that.
    Any advice is apprecaited.

    If you still have the .muse file for the template you want you can open it up in Muse 'Select All' --> Copy.
    Open your destination blank template and paste it. You can have bothe muse files up in Muse at the same time.

  • Can you import form responses from one responses file to another? I know you can export...

    I have a distributed form with a responses file that has six responses in it. Somehow the distribution got cut off and I had to set up a new distributed form and a new responses file. I was able to export the six old responses to a .csv file, but have not found a way to IMPORT the .csv file into the new responses file.
    "Add" does not work-- it is looking for PDF files only. Does anyone know a way to import those 6 responses into my new responses file? The distributed form did not change in any way, so all of the fields are still exactly the same.
    I can create a master portfolio and just add the two portfolios together, but they just remain as file icons within the portfolio and I need the data to be inline together in one file.
    Thank you very much.

    If you still have the .muse file for the template you want you can open it up in Muse 'Select All' --> Copy.
    Open your destination blank template and paste it. You can have bothe muse files up in Muse at the same time.

  • Can you Import  albums/matadata from a vault to a new library ?

    After using ver3.01 for a few weeks and getting comfortable with it, I converted & upgraded several older managed libraries. All went well except for the last one. There must be some corrupted images somewhere in that 200Gig Library, for all the horror stories I read about on this forum materialized - The endless hours, the spinning beach ball, the crashes etc.
    Since I had backed up this Library with vaults ( I was not able to rebuild from the vault either ), I knew that by RIght Clicking on the Vault and "show package content" I could access & rescue the projects individually. That worked and here I come to the part I could not successfully complete -import an existing album to a new library.
    Where I had both projects and albums residing inside a folder - I could move the projects to a new Library, but not the Albums. Is there a way to do that ?

    I would say no. I have an Ipad2 with the connection kit. A recent Sony camera which works fine in imovie for my 27" imac, but nothing with the Ipad. Only thing that it finds are pictures that can be made with the same video camera. Apple wrote a note aboit probkmes with importing, but i'm very disappointed with what i have right now.
    http://support.apple.com/kb/TS3719

  • HDD failure - can you import photos & music from iPod to new HDD?

    My Hardrive gave up the ghost last night (flashing folder with ?) I have taken it back today to have a replacement HDD under warranty.
    The only backup I have as such is all my music and photos on the iPod. When I get my MB back with the new HDD is there a way to get iTunes to import all the music & album artwork? aslo will iPhoto be able to import the photos (which are all on the iPod at full quality)?
    Needles to say I will be buying Time Capsule in the next few weeks as it's going to take me ages to redo all the speedsheets and documents that were not backed up

    There are a number of programs that can transfer data from an iPod to a Mac. Senuti is free but I don't know if it does just music or can transfer other data as well. At any rate, hit your favorite Mac download site and search on iPod.

  • Can you import garageband projects from iPad2 to Mac?

    I'm having a heck of a time trying to import Garageband tracks (projects) from my iPad 2 to my Mac desktop.  I'm working iwht the latest versions and I know I did it once, but my new iPad GB projects aren't showing up on iTunes.  Frustrating.  Any thoughts or suggestions?

    littlezen wrote:
    import Garageband tracks (projects) from my iPad 2 to my Mac desktop.
    http://www.bulletsandbones.com/GB/GBFAQ.html#exportgbitogbx
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Can you import video footage from a tape camera via usb into final cut?

    I have new macbook, late 2008, and I am missing the firewire port.
    I have a tape camera so I cannot import video into imovie via usb.
    If I bought final cut express, could I be able to do such an import?
    Thank you.

    Nope. USB only.
    Connections and expansion
    MagSafe power port
    Gigabit Ethernet port
    Two USB 2.0 ports (up to 480 Mbps)
    Mini DisplayPort
    Audio line in
    Audio line out
    Kensington lock slot

Maybe you are looking for

  • Hiding a table column and its contents yet reading the values

    Hi all, hope someone can help as i urgently need a solution for this although its probably more of a javascript and html forms question than a JSP - but i couldnt find a good javascript forum - if any one has come across a good JS and HTML - i would

  • Photoshop CS3 Extended won't recognize QuickTime installation

    Hi, using Photoshop CS3 Extended, I tried opening an animated GIF today without success. After some forum searching I found I had to import it as video into layers. When I tried that I got this message: "Could not complete the video frames to layers

  • BW Crystal Reports interface

    Hi, We are planning using Crystal reports for one of our applications. Can some one please provide me the system requirements and the steps involved in setting up the connection between BW and Crystal reports. Your help is greatly appreciated. Thanks

  • Weblogic 6.1 managed server

    Hello, After installing weblogic 6.1, I tried running a managed server. However, it gave me the following error message: <2001/11/1 譯觼04渀05禳49秮> <Notice> <WebLogicServer> <Starting WebLogic Managed Server "SimsOneServer" for domain "mydomain"> <2001/

  • Disjointed rollover fade - Please help!

    This is my website. I have one div containing a swf file with 2 ap divs ontop. The first ap div is positioned over hovering ball, the second is placed to the right hand side within the swf. I want to rollover the first ap div to make the second ap di